Frosted PVC Film ka ɲɛsin datugulanw sirili & sɛbɛnni ma

Frosted PVC Film ka ɲɛsin datugulanw sirili ma ani ka sɛbɛnni kɛ

HSQY bɛ PVC filimu ni sɛbɛnw di minnu bɛ kɛ ni nɛnɛ ye, minnu bɛ kɛ ka datugulanw siri, ka sɛbɛnni kɛ, ka kɛsu da, ka blister kɛ, ka sɛbɛnnikɛlanw ani baarakɛlaw ka fɛn caman tigɛli baara wɛrɛw kɛ. O fɛn in bɛ PVC kɛnɛya ni yɔrɔ matte frosted fara ɲɔgɔn kan walasa ka yecogo nɔgɔya, min tɛ yeelen bɔ kosɛbɛ.

O ɲɛfɔli dafalen bɛ ɲɛfɔli kɛ a janya kan k’a ta 0,10mm na ka se 2mm ma. Sɛbɛn hakɛ dantigɛlenw ye 700 × 1000mm, 750 × 1050mm, 915 × 1830mm ani 1220 × 2440mm ye, ni hakɛ wɛrɛw bɛ sɔrɔ ka kɛɲɛ ni fɛn dilanni wajibiyalenw ye.

Ka ɲɛsin sirili-datugulan dilannikɛlaw ma, sɛbɛnnikɛlanw feerelaw ma, sɛbɛnnikɛlaw ma, pakew tigɛbagaw ma ani u tilabagaw fɛ, sanniko nafamaw ye a bonya, a sɛbɛnfura bonya, a sanfɛla cogoya, a jɛlen, a gɛlɛya, a flakɛ ani a bɛ bɛn duguma tigɛcogo, a sɔgɔli, a dacogo walima a dilanni taabolo ma.

Frosted PVC Film Produit Wideyo

Frosted PVC Film Produit Ja

Frosted PVC Film ye mun ye?

PVC filimu min bɛ kɛ ni nɛnɛ ye, o ye polivinili kuloridi ye min bɛ ye walima min bɛ yeelen bɔ, a ɲɛda bɛ kɛ fɛn ye min bɛ kɛ ni fɛn ye min bɛ kɛ ni fɛn ye. Ni i y’a suma ni PVC nɔgɔlen nɔgɔlen ye, a ɲɛda min bɛ kɛ ni nɛnɛ ye, o bɛ kɛ sababu ye ka ɲɛda nɔgɔya ani ka dɔ bɔ a ɲɛnafin barikama na.

Ka kɛɲɛ ni a bonya ye, o fɛn bɛ se ka dilan ka kɛ fɛnw ye minnu bɛ se ka wuli, minnu ka gɛlɛn walima minnu ka gɛlɛn. Baara minnu bɛ kɛ, olu ye sirilanw ye, fɛn sɛbɛnnenw, kɛsu folilenw, blister pakew ani sɛbɛnnikɛlan walima pakew fɛn wɛrɛw.

O fɛn bɛ se ka tigɛ, ka sɔgɔ ani ka dilan ka kɛɲɛ ni a janya sugandilen ye ani fɛn dilannenw wajibiyalenw. Sɛnɛfɛnw dilanni cogoya ka kan ka bɛn minɛnw ni fɛn caman tigɛli taabolo yɛrɛ ma.

Frosted PVC Film Ɲɛfɔliw

Waati min bɛ ɲɛminɛ

Sɛnɛ waati ka kan ka dafa ka kɛɲɛ ni a bonya, a bonya, a hakɛ ani a komandi laban wajibiyalenw ye.

Tekniki Sɛbɛnw

PVC Clear Sheet Kunnafoni sɛbɛn.pdf PVC sɛbɛnw sɛgɛsɛgɛli rapɔɔri.pdf

Frosted PVC Film ka fɛn kolomaw

Surface Matte Transparente (yɔrɔ min bɛ kɛnɛya).

PVC basigilen jɛlen bɛ yecogo di ka sɔrɔ a yɔrɔ min bɛ nɛnɛ, o bɛ yecogo nɔgɔya, min tɛ yeelen bɔ kosɛbɛ.

Fanga ni Gɛlɛya ɲuman

PVC minɛn dilannen don ni fanga ni gɛlɛya ɲuman ye walasa ka sirili, sɛbɛnni, pakew ani fɛn caman tigɛli kɛcogo bɛnnenw kɛ.

Surface Yeecogo saniyalen

O fɛn bɛ dilan walasa a cogoya ka nɔgɔn, a bɛ kɛ cogo kelen na, k’a sɔrɔ kristalɛ yɔrɔw yelen tɛ, ni jikuruw walima nɔgɔw tɛ a sanfɛla la.

Surface Flatness ɲuman

Flati ɲuman bɛ dɛmɛ don baarakɛcogo sabatilen na sɛbɛnni, tigɛ, punch, foli ani fɛn caman tigɛli baara wɛrɛw senfɛ.

Uniform Thickness (Jɛkulu kelen-kelen bɛɛ).

A janya basigilen nafa ka bon ni PVC filimu walima sɛbɛnfura bɛ baara kɛ ni sɛbɛnni ye, ni sirili-datugulan dilanni ye walima ni pakew tigɛli ye.

Texture Frosted Uniforme (Frosted Texture) ye

Matte surface bɛ kɛ sababu ye ka frosted yecogo basigilen di min bɛnnen don baarakɛlaw ka jiracogo ma ani decoration baarakɛcogo ma.

Frosted PVC Film ka ɲɛsin datugulanw sirili ma

PVC filimu min bɛ kɛ ni nɛnɛ ye, o bɛ se ka kɛ sɛbɛnw ni jiracogo sirilanw ye yɔrɔ minnu na, ɲɛda walima kɔfɛ datugulan min bɛ kɛnɛya walima min bɛ yeelen bɔ, o ka kan ka kɛ. A ɲɛda matte bɛ jiracogo nɔgɔlen di ka tɛmɛ PVC jɛlen manaman kan.

Baarakɛminɛnw bɛ se ka kɛ rapɔɔri ɲɛw ye, jiracogo ɲɛw, gafew, gafew, kaye, foli ani sɛbɛnnikɛlan wɛrɛw. Janya sugandilen ka kan ka bɛn ni sɛgɛsɛgɛli, gɛlɛya ani siriminɛn wajibiyalenw ye.

Walasa ka punch ni sirili baara kɛ, sannikɛlaw ka kan ka sɛbɛnw hakɛw, u bonya ani u gɛlɛyali dafa ka kɛɲɛ ni punching minɛnw ye ani sɛbɛn dafalenw cogoya.

Film PVC frosted min bɛ kɛ ka sɛbɛnni kɛ

Sɛbɛnni ye baara koloma wɛrɛ ye nin PVC fɛn min dilannen don ni nɛnɛ ye. Matte surface bɛ sɛbɛnni cogoya wɛrɛ bɔ ni PVC jɛlen polisilen ye, wa a ka kan ka jateminɛ ni enki laɲininen ye ani a dilanni minɛnw.

Ka ɲɛsin datugulan sɛbɛnnenw ma, sɛbɛnnikɛlanw ani pakew kɔnɔfɛnw ma, sannikɛlaw ka kan ka jateminɛ kɛ u ɲɛda cogoya, u flakɛ, u bonya, u sɛbɛnni bɛncogo ani u tigɛcogo walima u dilanni wajibiyalenw duguma.

PVC frosted min bɛ kɛ ka kɛsu foli ni blister kɛ

Box folilenw ni blister furaw fana ye baara bɛnnenw ye nin PVC fɛn in na. Fɛn min bɛ kɛ ni nɛnɛ ye, o bɛ se ka kɛ sababu ye ka fɛn dilannen ye ka fara a ɲɛda cogoya kan min ka nɔgɔn ka tɛmɛ pake jɛlenw kan minnu bɛ manamana.

Ka ɲɛsin kɛsu dabɔlenw ma, sɛbɛn sugandilen ka kan ka jateminɛ ni tigɛcogo, jatebɔcogo ani foli kɛcogo laɲininen ye. Ni kurukuruw kɛli ye, bɛnkan ka kan ka dafa ni kurukuruw dilanni minɛn laɲininenw ye ani kurukuruw jateminɛcogo dafalen.

PVC frosted vs PVC jɛlen jɛlen

Fɛn dilannenw ka baarakɛminɛnw fotow

Dipilomu

Sannikɛla minnu bɛ sariya labatoli kɛrɛnkɛrɛnnen walima sɛgɛsɛgɛli sɛbɛn ɲini, olu ka kan k’a jira ko sɛbɛn min bɛ tali kɛ o la, o bɛ PVC ɲɛfɔli tigitigi ɲɛfɔ min bɛ komandi kɔnɔ.

HSQY Plastic Group Dugukolo kan ɲɛjiraliw

Sɛnɛfɛnw dilanni ni u forokoni

Frosted PVC Film sugandicogo

1. Aw bɛ a jira ko a janya wajibiyalen don

Aw bɛ a janya dɔ sugandi milimɛtɛrɛ 0,10 fo milimɛtɛrɛ 2 cɛ ka kɛɲɛ ni sɛgɛsɛgɛli, gɛlɛya ani fɛn dilannen wajibiyalen ye.

2. Aw bɛ Hakɛ dafalen dafa

Aw bɛ sɛbɛnfura cogoya jɔnjɔn sugandi walima ka hakɛ wajibiyalenw di ka kɛɲɛ ni sirili-datugulan cogoya ye, sɛbɛnni kɛcogo walima pakew jiginni wajibiyalenw.

3. Aw bɛ Mati Yecogo ɲɛfɔ

Aw bɛ balansi ɲininen dafa kɛnɛya ni nɛnɛ yecogo cɛ ka kɛɲɛ ni datugulan dafalen ye, a yɔrɔ sɛbɛnnen walima a foroko.

4. Aw bɛ mɔgɔw ladɔnniya fɛn caman tigɛli fɛɛrɛ la

Aw bɛ a jira ni PVC bɛna sɛbɛn, ka sɔgɔ, ka tigɛ, ka da, ka sɔgɔ walima ka dilan walasa a janya sugandilen ka se ka jateminɛ ka ɲɛ.

5. Ka komandi hakɛ ni a lase yɔrɔ dafa

Aw bɛ sanni hakɛ ni a lase yɔrɔ di ni aw bɛ quotation ɲini walasa baro ka se ka kɛ fɛn dilanni ni cili wajibiyalenw kan.

Ɲininkali minnu bɛ kɛ tuma caman na Frosted PVC Film kan

PVC film frosted ye mun ye?

PVC filimu min bɛ kɛ ni nɛnɛ ye, o ye PVC ye min bɛ ye walima min bɛ yeelen bɔ, a ɲɛda bɛ kɛ ni fɛn ye min bɛ yecogo nɔgɔlen di ka tɛmɛ PVC jɛlen jɛlen kan.

A janya hakɛ jumɛn bɛ sɔrɔ?

O ɲɛfɔli dafalen bɛ ɲɛfɔli kɛ a janya kan k’a ta 0,10mm na ka se 2mm ma.

Hakɛ jɔnjɔn jumɛnw bɛ sɔrɔ?

A hakɛ dantigɛlenw ye 700 × 1000mm, 750 × 1050mm, 915 × 1830mm ani 1220 × 2440mm ye.

Yala ladamu hakɛw bɛ se ka di wa?

Awɔ. Baro bɛ se ka kɛ hakɛ wɛrɛw kan ka kɛɲɛ ni fɛn caman tigɛli wajibiyalen ye.

Yala o fɛn bɛ se ka kɛ ka datugulanw siri wa?

Awɔ. Frosted PVC film bɛ se ka kɛ sɛbɛnw, rapɔɔri ani jiracogo sirili datugulanw ye minnu bɛ bɛn ɲɔgɔn ma, yɔrɔ minnu na yɔrɔ jɛlen matte wajibiyalen don.

Yala PVC sirili datugulan minnu bɛ kɛ ni nɛnɛ ye, olu bɛ se ka punch wa?

Punching suitability bɛ bɔ a janya, a gɛlɛya ani a siriminɛn sugandilenw na. Sannikɛlaw ka kan ka o fɛn jateminɛ ni u ka punch kɛcogo yɛrɛ ye.

Yala nin PVC filimu in bɛ se ka sɛbɛn wa?

Awɔ. Sɛbɛnni ye baarakɛminɛnw dɔ ye minnu kofɔlen bɛ. Bɛnkan ka kan ka jateminɛ ni enki ni sɛbɛnni kɛcogo laɲininen ye.

Yala a bɛ se ka kɛ ka kɛsu dabɔlenw kɛ wa?

Awɔ. Box folilenw ye baarakɛminɛn ye min bɛ sɛbɛn. A bonya ni a dacogo ka kan ka bɛn kɛsu jɔcogo dafalen ma.

Yala PVC min bɛ kɛ ni nɛnɛ ye, o bɛ se ka kɛ ka kurukuruw furakɛ wa?

Blister applications (Blister applications) bɛ sɛbɛn o fɛn in kama. Sannikɛlaw ka kan ka bɛnkan sɛgɛsɛgɛ ni u ka dilancogo laɲininen ye ani kurukuruw dilanni.

Danfara jumɛn bɛ PVC frosted ni glossy cɛ?

PVC min bɛ kɛ ni nɛnɛ ye, o ɲɛ ye matte ye ni a ɲɛda ɲɛnama bɛ dɔgɔya, ka sɔrɔ PVC min bɛ manamana, o ɲɛda bɛ sɔgɔsɔgɔ ka ɲɛ ani a ɲɛda jɛlen ka bon.

Yala o fɛn bɛ se ka tigɛ wa?

Awɔ. Tigɛcogo bɛnnen don fɛn caman tigɛli ma minnu bɛ bɛn ɲɔgɔn ma ni baarakɛminɛnw ni u kɛcogo bɛ bɛn fɛnw janya ma.

Yala PVC fɛn bɛ se ka sɔgɔ wa?

Dɔrɔmɛ bɛ se ka kɛ baara bɛnnenw na. Baarakɛminɛnw ni baarakɛcogo ka kan ka sugandi ka kɛɲɛ ni PVC janya ye.

Yala o fɛnw bɛ se ka dilan wa?

O fɛnw bɛ se ka dilan walasa ka baara kɛtaw kɛ minnu bɛ bɛn ɲɔgɔn ma. Foroko cogoyaw ka kan ka jateminɛ ka kɛɲɛ ni u bonya ni u jateminɛcogo dafalen ye.

Kulɛri jumɛnw bɛ sɔrɔ?

Kulɛri jɛlenw ni kulɛri wɛrɛw bɛ sɔrɔ. Kulɛri wajibiyalen kɛrɛnkɛrɛnnenw ka kan ka dafa ni i bɛ quotation ɲini.

Koman hakɛ fitinin ye mun ye?

O komandi hakɛ fitinin min sɛbɛnnen bɛ o ye kilo 1000 ye.

Ne ka kan ka kunnafoni jumɛnw di walasa ka quotation sɔrɔ?

Aw bɛ a janya, a bonya, a kulɛri, a kɛcogo, a jiginni kɛcogo, a hakɛ ani a lase yɔrɔ wajibiyalenw di.

HSQY Plastic Group ko la

Changzhou Huisu Qinye Plastic Group Co., Ltd. ka baara kɛlenw ka ca ni san 20 ye PVC sɛbɛnfura, PET sɛbɛnfura filimuw ni plastiki fɛn wɛrɛw dilancogo la, minnu bɛ kɛ ka pakew dilanni, sɛbɛnni, taamasiyɛnw ani izini caman tigɛli kɛ.

Sosiyete in bɛ fɛn dilanni sira duuru baara ni don o don sɛnɛfɛnw dilanni seko ye tɔni 50 ye, wa a bɛ baara kɛ ni kiliyanw ye suguw la i n’a fɔ Ɛsipaɲi, Itali, Alimanjamana, Ameriki ani Ɛndujamana.