DOP ni DOTP ka ɲɛfɔli surun dɔ

DOP ni DOTP Plasticizers: Danfaraba ye mun ye?

DOP ni DOTP ye plastiki ye min bɛ kɛ fɛn bɛɛ la, minnu bɛ kɛ ka PVC nɔgɔya, ka fɛn caman sɛgɛsɛgɛ ani ka baara nɔgɔya. Danfaraba min bɛ u ni ɲɔgɔn cɛ, o ye u ka molekiyɔmuw jɔcogo ye: DOP, a ka c’a la, a bɛ tali kɛ DEHP la, o ye ɔritoftalati ye, ka sɔrɔ DOTP, n’a bɛ fɔ fana ko DEHT, o ye terefitalati ye, wa a ka c’a la, a bɛ sugandi ka kɛ ortoftalati ye.

DOP ni DOTP ka ɲɛfɔli kɛ

DOP ni DOTP ka molekiyɔmu formula ye kelen ye ani u ka molekiyɔmu girinya bɛ ɲɔgɔn ta, nka u ye jɔyɔrɔfalen izomɛriw ye. DOP la, ɛsitɛri kulu fila bɛ ɲɔgɔn kɛrɛfɛ bololanɛgɛ kasadiman kan. DOTP la, u bɛ ɲɔgɔn kɛrɛfɛ. O danfara sigicogo in bɛ nɔ bila bɔgɔbɔgɔli, jiginni, kuran kɛcogo, sariyasunba furakɛli ani baara kuntaalajan na fɛn caman sɛgɛsɛgɛli la PVC .

Tɔgɔdacogo: Jagokɛyɔrɔ PVC suguw la, 'DOP' kɔrɔ ka teli ka kɛ DEHP ye ni CAS 117-81-7 ye. A man kan ka ɲagami ni di-n-octyl phthalate ye, walima DNOP, o min ye fɛn wɛrɛ ye. sannikɛlaw ka kan ka kemikɛli tɔgɔ ni CAS nimɔrɔ sɛgɛsɛgɛ tuma bɛɛ lakana kunnafoniw kan sɛbɛnfura min bɛ kɛ .

Plastikiw bɛ baara kɛ cogo di PVC ?

PVC min ma plastiki, o ye fɛn gɛlɛn ye a dacogo la. Plastikikɛlan dɔ bɛ don PVC polimɛri cakɛdaw cɛ, ka dɔ bɔ fanga minnu bɛ o cakɛdaw minɛ ɲɔgɔn na. O kɔ fɛ, cakɛdaw bɛ Se ka Taa nɔgɔya la, o bɛ gɛlɛya Dɔgɔya ani ka dɔ Fàra 'sèn kan, ka janya ani ka baara Kɛ. O laban bɛ bɔ PVC resin na, plastiki doni, sabatili, fasa, pigment, baarakɛcogo ani baarakɛcogo.

DOP Plasticizer ye mun ye?

DOP ye laadala izini tɔgɔ ye min bɛ fɔ bis(2-ethylhexyl) phthalate ma, n’a surunyalen don kosɛbɛ ko DEHP. A tariku ka jan i n’a fɔ fɛn bɛɛ lajɛlen PVC plastiki bawo a bɛ nɔgɔya ɲuman di, ka bɛnkanba di, ka baarakɛcogo sabatilen di ani ka furakɛli musaka kɛ ɲɔgɔndan na.

Ka kɛɲɛ ni sigida sariyaw ye ani fɛn dilannenw ɲɛfɔli ye, DOP kɛra baarakɛminɛn ye izini PVC filimu na, jiri dilannenw na, finiw na minnu datugulen don, duguma, bɔgɔdaga, sigilanw, gaziw, sennasanbara yɔrɔw ani kabali fɛnɲɛnamafagalan sugandilenw. A ka sariyasunba cogoya ka kan ka lajɛ kosɛbɛ sani a ka ɲɛfɔ fɛnw kan minnu bɛ hadamadenw ka fɛnɲɛnamafagalanw tali kosɛbɛ.

DOTP Plasticizer ye mun ye?

DOTP kɔrɔ ye dioctil terephthalate ye, wa a bɛ fɔ fana ko DEHT walima bis(2-ethylhexyl) terephthalate. O ye ji jɛlen ye, min kasa man ca, a bɛ kɛ fɔlɔ PVC . Ikomi a ye tereftalati ye sanni ka kɛ ɔritoftalati ye, 'plasitiki min tɛ ɔritoftalati ye' ye ɲɛfɔli ye min bɛ se ka kɛ fɛɛrɛko siratigɛ la.

DOTP bɛ jateminɛ tuma caman na i n’a fɔ DOP nɔnabila ni fɛn dilannikɛla mago bɛ PVC bɛnkan ɲuman na ka fara fɛnw jiginni dɔgɔyali kan, a sabatili ka ɲɛ, a bɛ se ka jiginni walima a bɔli kunbɛn, kuran nafa nafamaw ani sariyasunba wɛrɛ.

DOP ni DOTP ka baarakɛcogo sumalen

Ninnu ye izini caman sumalenw ye, u tɛ nafa garantiw ye. Jagokɛlaw ka hakɛw bɛ danfara ka kɛɲɛ ni saniya ni u dilannikɛla ye, ka sɔrɔ fɛnɲɛnamafagalan dafalenw ka baarakɛcogo bɛ Changé ni resin suguya ye, ni plasitiki doni ye, ni fasaw ye, ni stabilizerw ye ani ni sɛgɛsɛgɛli cogoyaw ye. Baara kɛ ni feerekɛlaw ka fɛɛrɛbɔ kunnafoniw ye ani baarakɛcogo kɔrɔbɔliw ye walasa ka latigɛ laban kɛ.

1. Molecules (Molecules) ka sigicogo

DOP ye ortho isomère ye: a ka ɛsitɛri kuluw bɛ sigi ɲɔgɔn kɛrɛfɛ ring aromatique kan. DOTP ye para izomɛri ye : kuluw bɛ jɔ ɲɔgɔn kɛrɛfɛ. O de y’a to kemikɛli fila minnu ka formula ye kelen ye, olu bɛ se ka kɛ cogo wɛrɛ la PVC fɛnɲɛnamafagalan dɔ kɔnɔ, wa u bɛ furakɛ cogo wɛrɛ la sariyaw fɛ.

2. Plasticizing Efficiency ani baarakɛcogo ɲuman

DOP lakodɔnnen don ni nɔgɔyacogo ɲuman ye ani baarakɛcogo min bɛ se ka fɔ ka ɲɛ. DOTP bɛ se ka gɛlɛya ni masin baarakɛcogo sumalen sɔrɔ fura caman na, nka a man kan ka kɛ i n’a fɔ a yɛrɛma kelen-kelen bɛɛ nɔnabila. Fusion kɛcogo, a sɔgɔli ani a ni fasa walima plastiki filananw ka jɛɲɔgɔnya bɛ se ka Changé.

3. Yɛlɛma ni kuntaalajan sabatili

Plastiki bɔnɛ bɛ se ka dɔ fara kasa walima sisi kan ani ka se ka fɛn caman kɛ PVC ka gɛlɛya walima ka kari waati tɛmɛnen kɔfɛ. A ka ca a la, DOTP bɛ sugandi ni fɛnɲɛnamafagalanw ka wulicogo dɔgɔyali ani plastiki tali kuntaalajan ɲɛnabɔli nafa ka bon. Aw bɛ o fɔlen in tiɲɛ ni funteni kɔrɔbɔli ni girinya dɔgɔyali sɛgɛsɛgɛliw ye minnu bɛ bɛn baarakɛcogo funteni laɲininen ma.

4. Kɔnɔnafili ni bɔli kɛlɛli

Yɛlɛma bɛ se ka kɛ sababu ye ka surface tackiness, staining, print-transfer gɛlɛyaw walima ka bɔnɛ a la ka se ka fɛn caman sɛgɛsɛgɛ. A bɔli bɛ se ka kɛ ni PVC ye ji, safinɛw, tuluw, fɛnɲɛnamafagalanw walima furajiw maga ɲɔgɔn na. A ka ca a la, DOTP bɛ jateminɛ ni a ka kan ka kɛ ni farikolo tangacogo ɲuman ye, nka funteni, a magali waati, plastiki hakɛ ani a kɛrɛfɛfɛn bɛɛ bɛ nɔ bila a nɔ na.

5. Funteni ni nɛnɛ baarakɛcogo

Plastiki fila bɛɛ bɛ se ka dɛmɛ don funteni baarakɛcogo nafama na PVC . DOTP bɛ jateminɛ tuma caman na yɔrɔ minnu na funteni kɔrɔbayali, farikolo girinya dɔgɔyali ani fɛn caman sɛgɛsɛgɛli kuntaalajan ye fɔlɔfɔlɔw ye. Ni farigan jugumanba don, furakɛlikɛlaw bɛ se ka plastiki fɔlɔ ni adipate walima sebacate ɲagami ɲɔgɔn na. Walasa ka kabali baara ɲini min ka funteni ka bon, trimellitate min ka dɔgɔn, o bɛ se ka bɛn kosɛbɛ.

6. Kuranko ɲɛnabɔli

DOTP bɛ jateminɛ kosɛbɛ PVC nɛgɛ ni kabali fɛnɲɛnamafagalanw na minnu bɛ se ka wuli ka bɔ a nɔ na k’a sababu kɛ a ka kuran sɔgɔli, a bɛ se ka wuli ani a bɛ to senna. Fɛnɲɛnɛma dafalen ka kan ka tɛmɛ hali bi sariyaw kan minnu bɛ tali kɛ a hakɛ la, a ka dielektriki fanga, a ka funteni kɔrɔbaya, a ka teli ka a minɛ, a ka janya minɛ ani a ka tasuma baara.

7. Musaka ni Nafa bɛɛ lajɛlen

Plastiki sɔngɔw bɛ taa ni balofɛnw ye, mara, komandi hakɛ ani fɛnw ladonni, o la, DOP-ka-DOTP sɔngɔko sɔngɔ latigɛlen tɛ se ka da a kan. Aw bɛ furakɛli musaka bɛɛ lajɛlen, baarakɛcogo sɔrɔta, dɛsɛ farati, fɛn dilannenw ka ɲɛnamaya, sɛgɛsɛgɛli wajibiyalenw ani suguya sɔrɔli suma sanni ka tɔni kelen sɔngɔ dɔrɔn suma ɲɔgɔn na.

DOP vs DOTP Baarakɛminɛnw

Flexible PVC Filimu ni sɛbɛnfura

Plastikiw bɛ nɔgɔya, janya, foli muɲuli ani funteni dɔgɔyali kɛcogo kɔlɔsi PVC filimu kɔnɔ min bɛ se ka wuli. DOP bɛ se ka kɛ izini baara caman na minnu yamaruyara, k’a sɔrɔ DOTP bɛ jateminɛ ka taa a fɛ filimuw la minnu bɛ to ka ɲɛ walima minnu tɛ ortoftalati ye. HSQY ka fɛnw PVC filimu nɔgɔlen min bɛ kɛ ka sɛbɛnni, duguma, rido, lakanani ani izini baara.

Filɛri ni Kabɛl Compounds

Kabɔri dilannikɛlaw bɛ volume resistivity, thermal ageing, low-temperature flexible, volatility, tasuma-fagalan bɛnkan ani baarakɛcogo suma ɲɔgɔn na. DOTP ye kandida ye min bɛ kɛ ka caya ka ɲɛsin kabali fɛnɲɛnamafagalanw ma minnu bɛ se ka wuli ka bɔ u nɔ na, ​​ka sɔrɔ plastiki kɛrɛnkɛrɛnnenw bɛ se ka kɛ wajibi ye funteni hakɛ caman na walima sigida minnu ka jugu kosɛbɛ.

Leather artificiel ani finiw minnu dilannen don ni finiw ye

Plastiki sugandili bɛ nɔ bila finimugu sɔgɔli la, fusili, surface feel, embossing, nɛnɛ-kari kunbɛnni, fogging ani kɔrɔya. DOTP bɛ se ka jateminɛ yɔrɔ minnu na, fɛn dilannikɛla mago bɛ jiginni dɔgɔyali la, ka nɔgɔya mara ka mɛn walima ka ɔritoftalati hakɛ dɔgɔya.

Dugukolo ni kogo datugulanw

PVC dugumalan mago bɛ balansi la fusion, flexibilité, dimensional sabatili, doncogo, so kɔnɔ-bɔli laɲiniw ani musaka. DOTP jateminɛna kosɛbɛ bi dugumalanw dilanni na, kɛrɛnkɛrɛnnenya la ni fɛnw ɲɛfɔcogo minnu tɛ ɔritoftalati ye walima ni sanniko wajibiyalenw bɛ tali kɛ ɲɔgɔn na.

Hoses, Seals, Gaskets ani Plastisols (Plastisolw) ye

Ni tubabufura, sigilanw, gaziw, dip coatings, sealants ani plastisols, sugandili bɛ bɔ viscosité, fusion, compression set, migration ani resistance ka ɲɛsin ji walima contact surface laɲininen ma. Kɛrɛnkɛrɛnnenya la, sɛgɛsɛgɛli minnu bɛ kɛ ka fɛnw bɔ, olu bɛ se ka da u kan ka tɛmɛ mɔgɔw bɛɛ ka fɔta kan ko plastiki kelen ka fisa tuma bɛɛ.

Rigid PVC sɛbɛnfura

A ka c’a la, plasitiki fɔlɔ caman tɛ PVC gɛlɛn na bawo a gɛlɛyali ni a hakɛ sabatili de ka kan. Sannikɛlaw ka... rigid PVC sɛbɛnfura min bɛ kɛ ka kan k’a jira ni fura in ma kɛ plastiki ye, ni a sɛmɛntiyalen don dɔɔnin walima ni a dilannen don walasa ka baara laban kɛ min bɛ se ka wuli.

Sugandili kɛcogo DOP ni DOTP cɛ

Sugandili ɲuman bɛ bɔ fura ɲɛfɔcogo la, a tɛ bɔ plastiki tɔgɔ dɔrɔn na. Baara kɛ ni nin desizɔn gafe in ye i n’a fɔ daminɛ.

Sani aw ka sugandi, aw bɛ laɲini ɲɛfɔ Shore gɛlɛya, resin hakɛ, plastiki doni, baarakɛcogo, baarakɛcogo-funteni hakɛ, funteni-kɔrɔya dan, jiginni walima bɔli dan, kuran wajibiyalen, kasa laɲini, ɲɛnamaya makɔnɔnen, taayɔrɔ suguya ani furakɛli musaka bɛɛ lajɛlen.

DOP bɛ se ka bila DOTP nɔ na cogo min na PVC Formulasi kɔnɔ

DOTP bɛ se ka DOP bila a nɔ na PVC fɛn caman na minnu bɛ se ka wuli, nka fɛn dilanni hakɛ caman cili ka kan ka tugu kɔrɔbɔli kɔrɔsilen kɔ sanni ka kɛ kelen-kelen ɲɔgɔn falen-falen ye min bɛ miiri.

1. Aw bɛ a daminɛcogo ɲɛfɔ : aw bɛ DOP hakɛ min bɛ sen na sisan, Shore hardness, tensile strength, elongation, fusion behavior, viscosity ani processing window sɛbɛn.

2. Aw bɛ laboratuwari sɛgɛsɛgɛli kɛ : aw bɛ a daminɛ sisan phr hakɛ kɛrɛfɛ, o kɔ aw bɛ DOTP doni ladilan walasa ka se laɲini gɛlɛya ni masin cogoyaw ma.

3. Aw bɛ baarakɛcogo lajɛ : aw bɛ jalen kɛcogo suman, fusili waati, girinya, bɔli tansiyɔn, kalandriya jaabi walima plastisol sɔgɔli i n’a fɔ a bɛ se ka kɛ cogo min na.

4. Baara laban kɛcogo kɔrɔbɔ : aw bɛ funteni kɔrɔya, girinya dɔgɔyali, nɛnɛ sɛgɛsɛgɛli, jiginni, bɔli, sisi, kuran kunbɛncogo ani kasa suma ka kɛɲɛ ni fɛn dilannenw ka ɲɛfɔli ye.

5. Aw ye sariya labatoli lajɛ : aw bɛ DOTP ka kalasi, faralifɛn tɔw bɛɛ ani barokun banbali sɛgɛsɛgɛ ka kɛɲɛ ni taayɔrɔ-sɔgɔli wajibiyalenw ye.

6. Aw bɛ a sɛgɛsɛgɛ fɛn dilanni sira kan : aw bɛ sɛgɛsɛgɛli kɛcogo kɔrɔsilen dɔ dafa sani aw ka jagokɛcogo caman Changer.

DOP ni DOTP ka lakana ni sariyasunw jateminɛw

DEHP, n’o ye fɛn ye min bɛ feere tuma caman na ni DOP ye, o bɛ sɔrɔ Erɔpu kemikɛli baarada ka kandidaw ka lisi ni yamaruyasɛbɛn kɔnɔ k’a sababu kɛ bangekɔlɔsi baga ye ani a bɛ farikolojidɛsɛ tiɲɛ. A fana bɛ dantigɛliw kɛ UE ka fɛn dilannenw suguya kɛrɛnkɛrɛnnenw na. EU RoHS Directive bɛ dan sigi DEHP la fɛn kelenw na minnu bɛ kɛ kuran ni ɛntɛrinɛti minɛnw na, ka kɛɲɛ ni a hakɛ ni dankarili ye.

Ameriki jamana na, Consumer Product Safety Commission bɛ denmisɛnw ka tulonkɛfɛnw ni denmisɛnw ladonnifɛnw bali minnu kɔnɔ DEHP ka ca ni 0,1% ye, plastiki yɔrɔ la min bɛ se ka sɔrɔ. Jamana wɛrɛw ni fɛn dilannenw suguyaw bɛ dan, danfara, sɛbɛnw ani sɛgɛsɛgɛli sariyaw danfaralenw sirataama.

DOTP ka kemikoro danfaralen don ani a ka sariyaw cogoya tɛ kelen ye, nka DOTP baara tɛ kɛ sababu ye ka fɛn dilannen dɔ kɛ a yɛrɛma 'safe,' 'dumuni hakɛ,' 'furakɛli hakɛ,' 'tulonkɛminɛn lakananen,' 'ftalati tɛ a la,' 'REACH sariya labato' walima 'RoHS sariya labato.' O fɔlenw bɛ daliluw wajibiya fɛn kɛrɛnkɛrɛnnen suguya kan, farankan dafalen pake, a jiracogo kan cogoyaw, barokun dafalen ani sugu.

Faamaw ka kunnafonidisɛbɛnw

• PubChem: Di(2-etilihɛksili) ftalati (DEHP) .

• ECHA: Bis(2-ethylhexyl) tereftalati (DOTP/DEHT) .

• ECHA ka kandidaw tɔgɔlajɛ: Bis(2-ethylhexyl) phthalate (DEHP) .

• EUR-Lex: RoHS ka cidenw ka cikan (UE) 2015/863

• US C PS C: Ftalatiw wajibiyalenw ani ɲininkaliw

Ɲininkali minnu bɛ kɛ tuma caman na DOP ni DOTP kan

Danfara jumɛn bɛ DOP ni DOTP cɛ?

A ka ca a la DOP ye DEHP ye, o ye orthophthalate plastiki ye. DOTP ye DEHT ye, o ye tereftalati plastiki ye. DOP nafa ka bon plastiki baarakɛcogo sabatili n’a musakaw la, k’a sɔrɔ DOTP bɛ sugandi tuma caman na walasa ka wuli ka dɔgɔya, ka sabatili ɲɛ, ka jiginni kunbɛn, ka kuran sɔrɔ ani ka jɔyɔrɔ min tɛ ɔritoftalati ye.

Yala DOP ni DEHP ye fɛn kelen ye wa?

Jagokɛlaw ka baarakɛcogo la, a ka ca a la DOP bɛ kuma DEHP kan, walima bis(2-ethylhexyl) phthalate, CAS 117-81-7. Ikomi daɲɛ surunw bɛ se ka kɛ fɛn ye min tɛ bɛn ɲɔgɔn ma, aw bɛ kemikɛli tɔgɔ dafalen ni CAS nimɔrɔ dafa sani aw ka sanni kɛ.

Yala DOTP ni DEHT ye plastiki kelen ye wa?

Awɔ. DOTP ni DEHT ye tɔgɔ ye min bɛ fɔ bis(2-ethylhexyl) terephthalate ma, CAS 6422-86-2. DEHT bɛ 2-ethylhexyl terephthalate sigicogo dɔn ka ɲɛ.

Yala DOTP ye plastiki ye min tɛ ftalati sɔrɔ wa?

A ka ca a la, DOTP bɛ feere i n’a fɔ a tɛ ftalati ye barisa a tɛ ɔritoftalati ye i n’a fɔ DEHP. 'Plastisite min tɛ orthophthalate ye' ye ɲɛfɔli ye min ka surun kosɛbɛ kemikoro siratigɛ la. Fɛn o fɛn fɔra ko ftalati tɛ fura dilannen dɔ la, o ka kan ka dɛmɛ ni fɛn ɲɛfɔlen ni sɛgɛsɛgɛli kɛcogo ɲɛfɔlen ye.

Yala DOTP ka fisa ni DOP ye wa?

DOTP sugandira kosɛbɛ ka kɛ fɛɛrɛ wɛrɛ ye bawo DEHP bɛ dantigɛlibaw kɛ sariyaw kɔnɔ. Nka, lakana bɛ bɔ farati la, a tali, a saniya, a tata hakɛ ani a kɛcogo laɲininen. Plastiki si man kan ka fɔ ko a farati tɛ diɲɛ bɛɛ kɔnɔ ni dalilu tɛ a kɛcogo kɛrɛnkɛrɛnnen na.

Yala DOTP bɛ se ka DOP nɔ bila a yɛrɛ la wa?

DOTP bɛ se ka DOP bila a nɔ na PVC furakɛlicogo caman na minnu bɛ se ka wuli, nka kelen-kelen caman cili tɛ garanti ye. A tata hakɛ, sabatilifɛnw, fasa, baarakɛcogo funteni ani fusili waati bɛ se ka kɛ ka ladilan. Aw bɛ laboratuwari ni fɛn dilanni sɛgɛsɛgɛliw dafa sani aw ka fɛn caman ci u nɔ na.

Yala DOTP bɛ funteni kunbɛncogo ɲuman di ka tɛmɛ DOP kan wa?

A ka c’a la, DOTP bɛ sugandi walasa ka wuli ka dɔgɔya ani ka funteni kɔrɔya baarakɛcogo ɲɛ, nka PVC faralen dafalen de bɛ labanko dantigɛ. Aw bɛ baara kɛcogo dafa ni girinya dɔgɔyali, sɔgɔsɔgɔli, janya-janya ani kɔrɔya sɛgɛsɛgɛliw ye minnu bɛ kɛ ka kɛɲɛ ni a kɛcogo kɛrɛnkɛrɛnnenw ye.

Yala DOTP bɛnnen don nɛgɛ ni kabali insulasi ma wa?

DOTP bɛ kɛ ka caya PVC nɛgɛ ni kabali fɛnɲɛnamafagalanw na minnu bɛ se ka wuli bawo a bɛ se ka kuran lakanani nafama di, ka sɛgɛsɛgɛli kɛ ani ka to senna. O fɛnɲɛnamafagalan dafalen ka kan ka kabali sariya wajibiyalenw dafa hali bi, funteni hakɛ, kuran sɛgɛsɛgɛli, kɔrɔya sɛgɛsɛgɛli ani tasuma wajibiyalenw.

Yala DOTP bɛnnen don dumuni-ɲɔgɔn-ɲini ma PVC wa ?

A bɛnnenya tɛ kɛ otomatiki ye. DOTP ka kalasi kɛrɛnkɛrɛnnen dɔ ani barokun banbali ka kan ka bɛn lisi ɲumanw ma minnu bɛ sirataama, danfara dantigɛliw, jiginni danw, dumuni suguyaw, ɲɔgɔnye waati ani funteni cogoyaw la taayɔrɔ sugu la.

Yala DOP bɛ se ka kɛ furakɛlifɛnw na wa?

DEHP-plasticized PVC bɛ ni tariku furakɛli baarakɛcogo ye, nka o baarakɛcogo bɛ se ka kɛ faratiw jateminɛni ye, taamasiyɛnw tali, u tali ani sariyaw wajibiyalenw. DOP min bɛ kɛ fɛn bɛɛ lajɛlen na, o man kan ka feere abada i n’a fɔ furakɛli kalasi ni sɛbɛnw ma sɔrɔ a fɛn tigitigiw, a minɛnw ani a suguya kan.

Sannikɛlaw ka kan ka sɛbɛn jumɛnw ɲini plastiki feerela dɔ fɛ?

Aw bɛ SDS, TDS, COA, kemikɛli tɔgɔ, CAS nimɔrɔ, saniyacogo ɲɛfɔli ani sariyasɛbɛnw ɲini minnu bɛ tali kɛ o ko la. Walasa ka baara labanw kɛ minnu ka gɛlɛn, aw bɛ fɛn dantigɛlenw, jiginni walima fɛn dilannenw sɛgɛsɛgɛli rapɔɔriw ɲini mɔgɔ sabanan fɛ minnu bɛ bɛn i taayɔrɔ suguya ma.

Kuncɛli: I ka kan ka plastiki jumɛn sugandi?

DOP ni DOTP fila bɛɛ bɛ se ka plasticize flexible PVC ka ɲɛ, nka u bɛ sanni ni baarakɛcogo fɔlɔw ɲɛnabɔ minnu tɛ kelen ye. DOP bɛ se ka to baarakɛcogo la izini fɛnw na minnu yamaruyara, minnu musaka ka dɔgɔ. A ka c’a la, DOTP ye daminɛ kandida barikama ye ni banbali, kuran baarakɛcogo, jiginni kunbɛnni, baarakɛ waati walima fɛn dɔ min tɛ ɔritoftalati ye, o nafa ka bon.

Sugandili ɲuman bɛ bɔ laɲini gɛlɛya la, taabolo, baarakɛcogo funteni, bɔli sigida, ɲɛnamaya, taayɔrɔ suguya ani sɛgɛsɛgɛli wajibiyalenw. Aw ye fɛɛrɛ sɛbɛnw lajɛ ani ka PVC faralen dafalen tiɲɛ sani jago ka dilan.

Walasa ka dɛmɛ sɔrɔ ka PVC sɛbɛnfura min bɛ kɛ walima PVC filimu min bɛ se ka wuli, o sugandi, aw bɛ se ka kuma HSQY Plastic fɛ ni aw ka fɛn dilannen suguya ye, a bonya, a bonya, a sɛgɛsɛgɛli, a baaracogo, a baara funteni, a taayɔrɔ suguya ani a labatoli wajibiyalenw.