multilayer films PET / PE ne akwanside laminates afoforo

PET/PE Multilayer Films ne Laminates a ɛwɔ akwanside a ɛkorɔn

HSQY yɛ PET/PE multilayer films ne akwanside laminates a wɔayɛ no sɛnea wɔpɛ ma thermoforming, form-fill-seal packaging, tray production, nam a wɔde kyekyere, mpataa a wɔde kyekyere, cheese packaging ne aduan anaa mfiridwuma mu nneɛma afoforo.

Standard PET/PE nhyehyeɛ no ka PET-based forming layer a ɛda adi pefee ne bɛyɛ 50μm polyethylene sealing layer bom. PET layer no ma pefeeyɛ, rigidity, mfiri ahoɔden ne thermoforming adwumayɛ, bere a PE layer no ma ɔhyew-sealing tumi, flexibility ne nsuo a ɛko tia.

Ɛnsɛ sɛ wɔka Standard PET/PE ho asɛm ara kwa sɛ oxygen-akwanside nhyehyɛe a ɛkorɔn yiye. Nnwuma a ɛhwehwɛ sɛ wɔde bere tenten gu so, wɔde nneɛma a wɔayɛ no foforo wɔ wim anaasɛ oxygen-transmission adwumayɛ a ɛba fam no betumi ahwehwɛ PET/EVOH/PE, PET/PVDC/PE, PA/EVOH/PE anaa akwanside laminate foforo a wɔasɔ ahwɛ.

HSQY de sini ahorow a emu da hɔ anaasɛ wɔayɛ no sɛnea wɔpɛ wɔ roll kwan so a ɛwɔ 3-inch anaa 6-inch cores ma. Total thickness, roll trɛw, roll diameter, kɔla, PE sealing layer, akwanside layer, anti-fog ayaresa, anti-block level ne weld anaa peel adwumayɛ betumi ayɛ nea wɔpɛ.

Ɛsɛ sɛ wɔpaw multilayer nhyehyɛe a ɛteɛ sɛnea ade a wɔakyekyere no, nkwa nna a wɔhwehwɛ, oxygen-transmission rate, nsu-vapor transmission rate, storage temperature, thermoforming bun, lidding film ne sealing equipment te.

Bisa Multilayer Film Bo a Wɔbɔ    Bisa Sini Nhwɛsode

PET/PE Sini Video a Wɔde Nneɛma pii Yɛ

Hwɛ video a ɛwɔ aseɛ ha no na sua pii fa HSQY PET/PE multilayer films, roll production, thermoforming applications ne customized barrier-film solutions ho.

Dɛn Ne PET/PE Multilayer Film?

PET/PE multilayer film yɛ laminated packaging ade a ɛka PET-gyina structural layer ne polyethylene ɔhyew-sealing layer bom.

Wɔ thermoforming dwumadie a ɛyɛ den ho no, wɔtaa paw PET-based layer no sɛ ɛbɛma emu ada hɔ, ayɛ den, impact adwumayɛ ne stable forming suban. Wɔde PE layer no si sealing fã no sɛnea ɛbɛyɛ a wobetumi de PE-sealing lidding film a ɛne no hyia asɔ tray anaa ase web a wɔayɛ no ano.

Wobetumi de nneɛma no ama sɛ weld-seal grade a wɔahyɛ da ayɛ ama nsɔano a ɛyɛ den a ɛtra hɔ daa anaasɛ sɛ peel grade a wɔahyɛ so ama nneɛma a wɔde kyekyere nneɛma a ɛsɛ sɛ wobue a ɛntetew dodo anaasɛ wɔbɛkyinkyim nneɛma a wɔde ahyɛ mu no.

Wɔ nneɛma a ɛyɛ mmerɛw wɔ oxygen, hua a ɛyera anaa mframa a wɔsesa ho no, wobetumi de EVOH, PVDC, aluminium, metallized anaa akwanside foforo a ɛyɛ adwuma aka ho. Ɛsɛ sɛ nhyehyɛe a wɔhwehwɛ no gyina nneɛma a wɔde ahyɛ mu no adwumayɛ a wɔasusuw so sen sɛ wɔde asɛmfua titiriw 'akwanside a ɛkorɔn.' bedi dwuma.

PET/PE Film Mfiridwuma Ho Nsɛm Krataa

Hwɛ mfiridwuma ho nsɛm krataa a ɛwɔ ase ha no mu. Ansa na wobɛkra no, si so dua sɛ document version, layer structure, total thickness ne tested properties no ne product a wɔabisa no hyia.

   Twe PET/PE Film Data Krataa no

PET/PE Multilayer Film Nkyerɛkyerɛmu

Ɛsɛ sɛ wɔkyerɛw layer nhyehyɛe a etwa to, ne nyinaa kɛse, ankorankoro-layer kɛse, trɛw a wotumi gyina ano, roll diameter, sealing side, barrier level ne aduan-nkitaho ahwehwɛde ahorow wɔ specification a wɔapene so mu ansa na wɔayɛ.

Sɛnea Layer Biara Yɛ Adwuma

PET Nhyehyɛe a Wɔde Yɛ Adwuma

PET-gyina layer no ma transparency, stiffness, dimensional mmoa, tensile ahoɔden ne titiriw forming nipadua a package.

PE Ɔhyew-Nsɔano Layer

PE layer no ma sealing surface a ɛfata, flexibility ne nsuo a ɛko tia. Nea wɔyɛ no nya seal-initiation temperature, hot tack, peel force ne efĩ a wotumi gyina ano so nkɛntɛnso.

EVOH Oxygen-Akwansideɛ a Wɔde Yɛ Nneɛma

EVOH tumi ma oxygen, huam ne mframa a ɛko tia no atu mpɔn kɛse. Ne akwanside adwumayɛ gyina EVOH grade, layer thickness, humidity, temperature ne ahobammɔ a layers a ɛbɛn hɔ de ma so.

Tie anaa Adhesive Layer a wɔde kyekyere nneɛma ho

Tie resin anaa lamination adhesive kyekyere polymers a ɛnyɛ nea ɛbata wɔn ho wɔn ho yiye fi awosu mu. Adhesive a wɔpaw betumi aka delamination resistance, aduan-contact fata ne onyin adwumayɛ.

PA Mfiridwuma Layer

Wobetumi de polyamide aka ho wɔ baabi a deep drawing, flex-crack resistance anaa puncture resistance ho hia sen rigidity a standard PET-based web.

Standard ne High-Barrier Film Nhyehyɛe ahorow

Nneɛma a wɔahyehyɛ din nkutoo nnɔɔso sɛ ɛbɛkyerɛ bere a wɔde besie. Ankorankoro layer thickness, package geometry, seals, storage humidity, ɔhyew ne product home betumi anya nkɛntɛnso kɛse wɔ adwumayɛ a etwa to.

Akwanside Adwumayɛ: OTR ne WVTR

Oxygen a Wɔde Fa Nnipa Mu Nkɔanim

OTR susuw oxygen dodow a ɛfa sini bi mu wɔ sɔhwɛ tebea horow a wɔakyerɛkyerɛ mu mu. Nsonsonoe a ɛba fam kyerɛ sɛ oxygen-akwanside yɛ adwuma kɛse.

Ɛsɛ sɛ wɔbɔ OTR ho amanneɛ bere nyinaa ne sɔhwɛ kwan, ɔhyew, ɔhyew a ɛwɔ hɔ, sini no mu duru ne susudua no fã.

Nsu-Nsuo a Ɛyɛ Nsuo a Ɛma Nsuo a Ɛma Nsuo Mu

WVTR susuw nsuo-nsuo a ɛkɔ so wɔ sɔhwɛ tebea a wɔakyerɛkyerɛ mu mu. Mpɛn pii no, PE boa ma nsu a mfaso wɔ so a ɛko tia, nanso WVTR a etwa to no gyina layer nhyehyɛe a edi mũ ne ne kɛse so.

Shelf-Life a Wɔde Di Dwuma

Film data ankasa ntumi nkyerɛ sɛ nneɛma pɔtee bi bɛtra hɔ bere tenten. Ɛsɛ sɛ shelf-life sɔhwɛ ahorow de ade ankasa, tray geometry, top film, sealing tebea, gas afrafra, kyekyɛ ɔhyew ne bere a wɔde sie di dwuma.

Weld, Easy-Peel ne Resealable Nneɛma a Wɔpaw

Seal suban gyina ase web ne soro film no nyinaa so. Ɛsɛ sɛ wɔsɔ nneɛma abien no hwɛ sɛ ade biako a wɔde kyekyere nneɛma wɔ mfiri a wɔde siesie nneɛma ankasa no so.

Thermoforming ne Form-Fill-Seal Adwumayɛ

Ɔhyew a Wɔde Yɛ Ɔhyew

Ɛsɛ sɛ wɔyɛ nsakraeɛ wɔ ɔhyew tebea mu sɛnea ne nyinaa mu duru, PET grade, forming depth, mfiri nhyehyɛe, ɔhyew mmeae ne line ahoɔhare te. Ɛnsɛ sɛ wɔde amansan nyinaa mu ɔhyew biako a wɔde yɛ ade di dwuma wɔ ɔdan biara mu.

Forming Depth ne Draw Ratio a Wɔde Yɛ Adwuma

Abura a emu dɔ hwehwɛ sɛ wɔkyekyɛ nneɛma pii na ebetumi ama ntwea a ɛyɛ tratraa anaasɛ flanges a ɛyɛ mmerɛw aba. Ɛsɛ sɛ adetɔfo de cavity dimensions, corner radius ne minimum finished-wall ahwehwɛde ahorow ma.

Plug Mmoa a Wɔde Ma

Plug-assisted forming betumi ama ɔfasu no kyekyɛ atu mpɔn wɔ abura a emu dɔ anaasɛ ɛyɛ den mu. Ɛsɛ sɛ wɔyɛ plug nneɛma, ɔhyew ne bere a wɔde yɛ adwuma no yiye ma sini a wɔapaw no.

Flange a Ɛyɛ Petee

Ɔhyew a ɛyɛ pɛ, nhyɛso a ɛyɛ pɛ, onwini ne trimming boa ma wɔma ɛyɛ tratraa sealing flange. Flanges a wɔakyinkyim no betumi ama channel leaks ne seal pressure a ɛnkɔ so pɛpɛɛpɛ aba.

Mfiri Sɔhwɛ

Ɛsɛ sɛ wɔpene so a etwa to no gyina sɔhwɛ ahorow a wɔde afiri a wɔde yɛ ade ankasa, nkuku, adwinnade a wɔde kata so, sini a ɛwɔ soro ne ade a wɔde yɛ no di dwuma so.

Multilayer Film Dwumadi ahorow

Nam a Wɔahyehyɛ no Foforo

Wobetumi de PET/PE ne PET/EVOH/PE sini ahorow no ayɛ no hyew ayɛ no ase nhama de ahyɛ nam a wɔayam no nwini mu. Ɛsɛ sɛ wɔpaw nhyehyɛe no sɛnea bere a wɔde bɛkora so, mframa a wɔde afrafra, nam kɔla a wɔhwehwɛ ne tebea a wɔde hyɛ mu te.

Mpataa ne Po mu Nnuan a Wɔde Gu Nneɛma Mu

Wobetumi de akwanside laminates ayɛ mpataa a wɔayam, ɛpo mu nnuan a wɔayam no wusiw, akutu ne ɛpo mu nnuan a wɔasiesie. Ɛsɛ sɛ wɔhwehwɛ sɛnea ɛko tia tow, nsu a wɔde siw ano, akwanside hua ne sɛnea nneɛma a wɔde sie awɔw mu no yɛ adwuma.

Cheese ne Nufusu a Wɔde Gu Nneɛma Mu

Nneɛma a wɔde di dwuma no bi ne kyiisi a wɔatwitwa, blocks, afã horow ne nufusu mu nnuan. Ɛsɛ sɛ wɔde oxygen akwanside, huam a ɛkora so, peel suban ne product home ne cheese su no hyia.

Delicatessen ne Aduan a Wɔayɛ no Yiye

Wobetumi de sini ahorow a ɛwɔ ntoatoaso pii adi dwuma ama nam a wɔatwitwa, nnuan a wɔasiesie, antipasti ne afã horow a ɛyɛ mmerɛw wɔ baabi a ɛho hia sɛ wɔde kyerɛ pefee na wɔsɔ ano daa.

Aduan a Wɔasiesie a Wɔde Gu Nneɛma Mu

Ɛnsɛ sɛ wɔka standard PET/PE ho asɛm ara kwa sɛ ɛfata ma ɔhyew a wɔde hyɛ mu, pasteurization, retort processing, ovens a wɔtaa de di dwuma anaa microwave san hyew. Saa dwumadie yi hwehwɛ sɛ wɔyɛ nhyehyɛeɛ a ɛtumi gyina ɔhyew ano a wɔagye atom wɔ ɔkwan soronko so.

Nnuru ne Aduruyɛ mu Nneɛma a Wɔde Gu Nneɛma Mu

Nnuruyɛ ne aduruyɛ mu dwumadie hwehwɛ sɛ wɔde nneɛma a wɔde yɛ adwuma a ɛfata a ɛsono emu biara, adwini a wɔahyɛ so, nea wotumi hwehwɛ, ahotew ne mmara ho nkrataa a ɛfa dwumadie pɔtee bi ho. Ɛnsɛ sɛ wɔde aduan a wɔde kyekyere nneɛma a wɔahyɛ da ayɛ no di dwuma ara kwa.

Modified-Wim tebea ne Vacuum Packaging

Modified-Atmosphere Nneɛma a Wɔde Gu Nneɛma Mu

MAP de gas a wɔde afra a wɔahyɛ so si mframa a ɛwɔ ade a wɔde ahyɛ mu no ananmu. Ɛsɛ sɛ ase wɛb, soro film ne nsɔano no kura gas a wɔhwehwɛ no mu wɔ bere a wɔahyɛ sɛ wɔde bɛto hɔ no mu.

MAP a ɛyɛ nam kɔkɔɔ a oxygen pii wom, nneɛma a wɔde kyekyere nneɛma a oxygen kakraa bi na ɛwom ne nneɛma a wɔde kyekyere nneɛma a carbon-dioxide wom betumi ahwehwɛ akwanside ne nsɔano ho nkyerɛkyerɛmu ahorow.

Vacuum a Wɔde Gu Nneɛma Mu

Vacuum packs hwehwɛ sɛ wɔde nsɔano a emu yɛ den, ɛko tia tokuru ne sɛnea ɛyɛ mmerɛw a ɛdɔɔso na ama ayɛ nea atwa ade no ho ahyia. Ebia packs a emu dɔ anaa ɛnyɛ pɛpɛɛpɛ no fata yiye ma PA-based structures sen rigid PET-based web.

Vacuum-Skin Nneɛma a Wɔde Gu Nneɛma Mu

Vacuum-skin packaging hwehwɛ sɛ wɔde tray a ɛyɛ den anaa ase web a ɛne no hyia ne honam ani film soronko bi. Ɛsɛ sɛ wɔsɔ honam ani fã, tray sealant ne ɔhyew nhyehyɛe no hwɛ sɛ ade a edi mũ.

Anti-Fog, Anti-Block ne Surface Nneɛma a Wɔpaw

Ayaresa a Wɔde Ko Tia Fog

Aduru a wɔde ko tia sum kabii boa ma nsu nketenkete a ɛba a ɛmma wontumi nhu nneɛma no so tew. Adwumayɛ gyina ɔhyew, nsuo a ɛyɛ nwini, nsuo a ɛwɔ afiri no mu ne ayaresa su so.

Anti-Block Additive a Wɔde Ka Ho

Anti-block additives anaa surface treatments ma roll unwinding ne sheet mpaapaemu tu mpɔn. Anti-block a ɛboro so betumi aka pefeeyɛ, gloss anaa sealing, enti ɛsɛ sɛ level no yɛ papa.

Silicone a Wɔde Kata So

Silicone a wɔde kata so betumi ama denesting, forming release anaa surface handling atu mpɔn. Ɛsɛ sɛ wɔsi sɛnea ɛne tintim, adhesion ne sealing hyia no so dua.

Sini a Wɔatintim ne Nea Wɔde Kɔla Ayɛ

Wobetumi asusuw adan a ɛda adi, fitaa, tuntum, dade-nsunsuanso ne customized-kɔla nhyehyɛe ahorow ho. Films a wɔatintim hwehwɛ sɛ wosi ink, tintim afã, adhesive ne forming distortion so dua.

Sɔhwɛ ahorow a wɔkamfo kyerɛ wɔ nneɛma a wɔde kyekyere nneɛma ho

• Total thickness ne ankorankoro-layer thickness.

• Roll trɛw, roll diameter, core kɛse ne winding akwankyerɛ.

• Transparency, haze, gloss ne kɔla a ɛyɛ pɛpɛɛpɛ.

• Oxygen-transmission rate wɔ tebea horow a wɔakyerɛkyerɛ mu mu.

• Nsu-nsuo a ɛkɔ nipadua no mu dodow wɔ tebea horow a wɔakyerɛkyerɛ mu mu.

• Thermoforming ɔhyew mfɛnsere ne cavity nkyerɛase.

• Ɔfasu-mu duru kyekyɛ ne ntwea so duru a ɛba fam koraa.

• Flange flatness, shrinkage ne dimensional a ɛyɛ den.

• Seal-initiation ɔhyew ne ɔhyew-tack adwumayɛ.

• Weld anaa peel ahoɔden wɔ sealing tebea ahorow mu.

• Paapae, nsu a ɛtwetwe, dye-penetration anaa vacuum-decay sɔhwɛ.

• Delamination ne interlayer bond ahoɔden.

• Puncture, impact ne flex-krak a ɛko tia.

• Anti-fog, anti-block ne mfiri-unwinding adwumayɛ.

• Nneɛma a wɔde yɛ adwuma no nkwa nna ne ne kyekyɛ ho sɔhwɛ ahorow.

Aduan-Nkitahodi ne Mmara mu Ahwehwɛde ahorow

Aduan-a ɛne ne ho di nkitaho fata no gyina PET resin, PE sealant, akwanside polymer, tie layer, adhesive, pigment, nneɛma a wɔasan de adi dwuma ne tebea horow a wɔpɛ sɛ wɔde di nkitaho no so pɛpɛɛpɛ.

Ɛsɛ sɛ adetɔfo kyerɛ gua a wɔrekɔ, aduan ko, ɔfã a wɔne wɔn di nkitaho tẽẽ, ɔhyew, bere tenten, ɔkwan a wɔfa so hyɛ mu ma ne sɛ ebia wɔde sini no bedi dwuma de ayɛ nwini, ayɛ hyew bio, ayɛ pasteurization anaasɛ sterilization.

RoHS fa nneɛma a wɔabara wɔ anyinam ahoɔden ne ɛlɛtrɔnik mfiri mu ho na ɛnsɛ sɛ wɔde di dwuma nkutoo sɛ adanse a ɛkyerɛ sɛ aduan a wɔde di nkitaho no di mmara so.

ISO 9001 ne ISO 14001 yɛ adwumayɛ-nhyehyɛe gyinapɛn. Wɔn ankasa nkyerɛ sɛ sini biara a wɔde nneɛma pii ayɛ no di mmara a ɛfa aduan a wɔde di nkitaho anaa nneɛma a atwa yɛn ho ahyia ho nsɛm so.

Nneɛma a Wɔsan De Di Dwuma ne Nneɛma a Ɛbɛkɔ So Daa Ho Nsusuwii

PET/PE yɛ nneɛma pii nhyehyɛe. Nea wobetumi asan de adi dwuma bio no gyina nea ɛwɔ mu no mu duru a ɛfa ho, nneɛma a wɔde nkata so, akwanside a wɔde yɛ nneɛma, nneɛma a wɔde yɛ nneɛma, nkyerɛwde ne tumi a mpɔtam hɔ nneɛma a wɔde di dwuma bio nhyehyɛe no wɔ so.

RoHS amanneɛbɔ, ISO 14001 adansedi krataa anaasɛ ankorankoro polymers a wotumi san de di dwuma a wɔde di dwuma no mma sini a ɛwɔ ntoatoaso pii a edi mũ no nyɛ nea wotumi de di dwuma bio wɔ nneyɛe mu.

Nkɔsoɔ a ɛbɛba wɔ nkɔsoɔ a ɛbɛtena hɔ daa no betumi ayɛ sɛ wɔbɛtew ne nyinaa mu duru so, wɔbɛma PET a wɔasan de adi dwuma no akɔ soro wɔ baabi a wɔma ho kwan, wɔbɛma ɔdan no ayɛ mmerɛw, wɔbɛtew nneɛma a wɔde yɛ nneɛma anaa nneɛma a wɔde kata so so na wɔapaw nhyehyɛe a ɛne nsuo a wɔde di dwuma bio a wɔde asi wɔn ani so no hyia.

Ɛsɛ sɛ wɔde nhyehyɛe a etwa to pɔtee, gua ne nhwehwɛmu kwan no foa nsɛm te sɛ nea wotumi de di dwuma bio, ɛnyɛ nea ɛmma nneɛma a atwa yɛn ho ahyia, nea ɛtra hɔ daa anaasɛ nea ɛtew carbon so no akyi.

Amanneɛbɔ Multilayer Film Options

• PET / PE gyinapɛn thermoforming sini a ɛyɛ hyew.

• PET/EVOH/PE sini a ɛwɔ oxygen-akwanside kɛse.

• PET/PVDC/PE ne akwanside nhyehyɛe titiriw afoforo.

• Weld-seal, mmerɛw-peel ne controlled-peel grades.

• Bɛyɛ 0.23-0.58mm gyinapɛn nyinaa mu duru.

• Customized PE nsɔano-layer kɛse.

• Kɔla ahorow a emu da hɔ, fitaa, tuntum ne nea wɔayɛ no sɛnea wɔpɛ.

• Anti-fog, anti-block, silicone-coated ne antistatic akwan horow.

• Virgin PET anaasɛ wɔapaw recycled-PET nhyehyɛe ahorow a wobetumi de adi dwuma.

• Customized roll trɛw, roll diameter, core ne winding akwankyerɛ.

• Printing ne reverse-printing a wobetumi apaw.

• Nhwɛsoɔ a wɔde yɛ, nsɔano ne shelf-life sɔhwɛ.

Nsɛm a Ɛho Hia ma Nsɛm a Wɔafa Ka

• Nneɛma a wɔakyekyere ne bere a wɔde asie a wɔde asi wɔn ani so.

• Nhyehyɛe anaa mprempren sini nhwɛsode a wɔhwehwɛ.

• Total thickness ne ankorankoro-layer ahwehwɛde ahorow.

• OTR ne WVTR a wɔhwehwɛ a ɛwɔ sɔhwɛ tebea horow.

• Roll trɛw, ne kɛse, emu duru ne core kɛse.

• Thermoforming-afiri ahyɛnsode ne ne mfonini.

• Cavity tenten, ne tɛtrɛtɛ, ne bun ne ne ntwea so radius.

• Weld, mmerɛw-peel, burst-peel anaasɛ resealable ahwehwɛde.

• Top-film nneɛma ne sealing-layer type.

• Sealing temperature, nhyɛso ne bere a wɔde tra hɔ.

• MAP gas afrafra, vacuum anaasɛ normal-wim nneɛma a wɔde kyekyere nneɛma.

• Anti-fog, anti-block, tintim anaa kɔla ahwehwɛde ahorow.

• Aduan a wɔde di nkitaho gua ne nkrataa a wɔhwehwɛ.

• Sɔhwɛ dodow, mfitiase nhyehyɛe ne afe afe dodow.

• Destination port, packaging ne da a wɔhwehwɛ sɛ wɔde bɛkɔ.

Send Wo Barrier Film Ahwehwɛde ahorow no

Nneɛma a Wɔde Gu Mu ne Nea Wɔde Kɔma

Nhwɛsoɔ a wɔde ahyɛ mu: Wobetumi de PET/PE nhwɛsoɔ a ne kɛseɛ yɛ A4 ahyɛ PP bag mu na wɔde ahyɛ adaka a ɛbɔ ho ban mu.

Roll packing: Roll mu duru, roll diameter, core, wrapping ne pallet orientation yɛ customized sɛnea film no nsusuwii ne adetɔfo di anohyeto ahorow.

Cut-sheet packing: Baabi a wɔde nkratafa a wɔatwa ma no, reference package mu duru bɛyɛ 30kg wɔ bag anaa carton biara mu, a egyina krataa no nsusuwii so.

Pallet packing: Wobetumi de bɛyɛ 500-2,000kg ahyɛ plywood pallet so sɛnea roll anaa sheet nsusuwii te.

Container loading: Reference loading yɛ bɛyɛ tɔn 20, ɛgyina roll dimensions, pallet nhyehyeɛ ne mmara kwan so anohyetoɔ a ɛfa emu duru ho.

Nneɛma a wɔde mena: Wobetumi de nhwɛsode ne nneɛma nketenkete a wɔkra no amena denam DHL, FedEx, UPS anaa TNT so. Wobetumi de po so anaa wimhyɛn mu nneɛma a wɔkra no pii amena.

Adansedi nkrataa ne Nwoma a Ɛyɛ Paara

HSQY betumi de amanneɛbɔ a ɛwɔ hɔ a wɔde sɔ nneɛma hwɛ, nnuru a wɔabara ho nkrataa ne management-system adansedi nkrataa ama ma wɔasan ahwɛ mu.

Ɛsɛ sɛ adetɔfo si so dua sɛ amanneɛbɔ biara ne PET grade pɛpɛɛpɛ, PE sealant, barrier layer, adhesive, kɔla, thickness ne nea wɔpɛ sɛ wɔde di dwuma no hyia.

Dɛn Nti na Wopaw HSQY sɛ Wo Multilayer Film Supplier?

HSQY Plastic Kuo no de PET/PE nkratafa, akwansideɛ kɛseɛ afrafra films, lidding films, thermoforming materials ne aduane-packaging trays ma amanaman ntam converters, aduane yɛfo ne packaging kyekyɛfoɔ.

• PET/PE ne PET/EVOH/PE nhyehyeɛ nkɔsoɔ.

• Standard ne akwanside kɛse thermoforming sini ahorow.

• Weld-seal ne mmerɛw-peel options.

• Customized thickness, trɛw, core ne roll diameter.

• Anti-fog, anti-block ne printed-film a wobetumi apaw.

• Nhwɛsoɔ a wɔde yɛ, nsɔano ne package sɔhwɛ.

• Aduan-di nkitaho ho nkrataa a egyina nsɛm pɔtee bi so.

• Export packing ne amanaman ntam po so hyɛn mmoa.

Ansa na wɔbɛyɛ no pii no, HSQY kamfo kyerɛ sɛ wɔmfa adetɔfo no ade ankasa, thermoforming afiri, nkuku, lidding film, gas afrafra ne sealing parameters bedi dwuma de agye film a wɔapaw no atom.

Hwehwɛ mu PET / PE laminated krataa range ne high-barrier composite films ma adan afoforo.

Di HSQY nkitaho na woanya Nhwɛsode ne Bo

HSQY Wiase Nyinaa Nneɛma a Wɔde Kyerɛkyerɛ

HSQY de multilayer packaging films, thermoforming sheets, lidding films ne aduan-packaging solutions kyerɛ wɔ amanaman ntam plastic ne nneɛma a wɔde kyekyere nneɛma ho ɔyɛkyerɛ ahorow mu.

Nsɛm a Wɔtaa Bisa Fa PET/PE Multilayer Films Ho

Dɛn ne PET/PE multilayer sini?

PET/PE multilayer film ka PET-based structure layer ne PE heat-sealing layer bom ma thermoformed trays, ase webs ne form-fill-seal packaging.

Dɛn na PET layer no yɛ?

PET layer no ma pefeeyɛ, rigidity, ahoɔden, dimensional stability ne titiriw thermoforming nipadua a package.

Dɛn na PE layer no yɛ?

PE layer no ma ɔhyew-sealing tumi, flexibility ne nsuo a ɛko tia. Ɛsan nso kyerɛ sɛnea weld anaa peel suban no fã kɛse no ara yɛ.

So PET/PE sini yɛ sini a ɛmma mframa bɔne nkɔ mu kɛse?

Standard PET/PE ma mfasoɔ wɔ packaging adwumayɛ mu, nanso ɛnsɛ sɛ wɔde toto ho ara kwa sɛ ultra-high oxygen-barrier structure. Si ne OTR a wɔasusuw no so dua ma dwumadie a wɔhwehwɛ no.

Nsonsonoe bɛn na ɛwɔ PET/PE ne PET/EVOH/PE ntam?

PET/EVOH/PE kura EVOH layer a ɛma oxygen, huam ne mframa a ɛko tia kɛse kɛse sen PET/PE nhyehyɛe a wɔahyɛ da ayɛ.

Bere bɛn na ɛsɛ sɛ mede EVOH akwanside di dwuma?

Wɔtaa paw EVOH ma nam, mpataa, kyiisi, delicatessen ne mframa a wɔayɛ no foforo a ɛhwehwɛ sɛ oxygen a ɛba fam no kɔ nipadua no mu.

So PET/PE sini no fata ma thermoforming?

Aane. Wobetumi ayɛ PET/PE grades a ɛfata no thermoformed ayɛ no trays ne bottom webs. Ɛsɛ sɛ wɔsɔ ɔhyew, nkuku nhyehyɛe, forming bun ne onwini hwɛ wɔ afiri ankasa no so.

So sini no fata ma mfiri a wɔde hyɛ krataa a wɔde hyɛ mu ma?

Aane. Ɛsɛ sɛ wɔde roll trɛw, core, forming tebea, indexing ne sealing adwumayɛ hyia FFS afiri no.

So wobetumi de PET/PE sini adi dwuma de ayɛ nneɛma a wɔde kyekyere nneɛma a wɔayɛ no foforo wɔ wim tebea mu?

Wobetumi de adi dwuma bere a akwanside adwumayɛ a wɔasusuw no di MAP ahwehwɛde ahorow ho dwuma no. Ebia nneɛma a oxygen nka ho anaasɛ ɛtra hɔ kyɛ no behia PET/EVOH/PE.

Dɛn ne OTR?

OTR yɛ oxygen a ɛkɔ nipadua no mu. Ɛsusuw oxygen dodow a ɛfa sini no mu wɔ ɔhyew ne ɔhyew tebea pɔtee bi mu.

Dɛn ne WVTR?

WVTR yɛ nsu-nsuo a ɛde kɔ nipadua no mu. Ɛsusu nsuo-nsuo a ɛnam sini no so wɔ sɔhwɛ tebea a wɔakyerɛkyerɛ mu mu.

Nsonsonoe bɛn na ɛda weld ne easy-peel film ntam?

Weld sini ma wonya nsɔano a ɛyɛ den a ɛtra hɔ daa. Wɔayɛ sini a ɛnyɛ den sɛ wɔbɛpepa no sɛnea ɛbɛyɛ a ebebue wɔ ahoɔden a wɔahyɛ so a ɛrentetew dodo anaasɛ tray no nsɛe.

So wobetumi de aduru a wɔde ko tia sum kabii aka ho?

Aane. Wobetumi asusuw akwan a wɔfa so ko tia sum kabii ho wɔ nnuan a wɔayɛ no nwini na ɛma nsuo a ɛyɛ nwini wɔ baabi a nsuo a ɛyɛ nwini no brɛ nneɛma a wɔtumi hu no ase.

So wobetumi de PET a wɔasan de adi dwuma adi dwuma?

Nneɛma a wɔapaw no betumi ayɛ PET a wɔasan de adi dwuma a egyina aduan-nkitahodi ahwehwɛde ahorow so, dwumadi-akwanside nhyehyɛe, pefeeyɛ ne adetɔfo nsɛm a wɔakyerɛkyerɛ mu.

So wobetumi asan de PET/PE sini a ɛwɔ afã horow pii adi dwuma bio?

PET/PE yɛ laminate a wɔde nneɛma pii ayɛ. Ankasa recyclability gyina layer ratio, adhesive, additives ne recycling infrastructure wɔ destination gua so.

So ISO 9001 ne ISO 14001 di adanse sɛ wobetumi asan de sini no adi dwuma bio?

Dabi Wɔyɛ management-system gyinapɛn ahorow na ɛnkyerɛ sɛnea wobetumi asan de nneɛma a wɔde kyekyere nneɛma a ɛwɔ afã horow pii ayɛ no foforo adi dwuma.

So PET/PE sini microwave anaa fononoo yɛ nea asiane biara nni ho?

Ɛnsɛ sɛ wɔde standard PET/PE di dwuma ara kwa ma microwave, oven, retort anaa ɔhyew a ɛkorɔn a wɔde hyɛ mu. Wɔhwehwɛ sɛ wɔde grade a ɛyɛ soronko a wɔagye atom a ɛko tia ɔhyew.

So sini no fata sɛ wɔde yɛ nwini?

Freezer a ɛfata no gyina PET formulation, impact adwumayɛ, seal layer ne storage temperature so. Ɛho hia sɛ wɔyɛ sɔhwɛ a ɛba fam wɔ ɔhyew mu.

So wobetumi ayɛ sini no sɛnea wɔpɛ?

Aane. Structure, total thickness, PE layer, trɛw, core, kɔla, akwanside level, anti-fog, anti-block ne sealing suban betumi ayɛ nea wɔpɛ.

Dɛn ne dodow a ɛba fam koraa a wɔkra?

MOQ a wɔahyɛ da ayɛ no bɛyɛ 1,000kg. Ebia nhyehyɛe titiriw, kɔla ne nneɛma a wɔde kata so a ɛyɛ adwuma behia dodow a ɛba fam koraa a ɛsono.

So nhwɛsode ahorow wɔ hɔ?

A4 nkratafa anaasɛ anohyeto roll samples betumi aba ama sɔhwɛ pefeeyɛ, thermoforming, sealing ne akwanside adwumayɛ. Mpɛn pii no, nea ɔtɔ no na otua nneɛma a wɔde mena.

Dɛn ne bere a wɔde yɛ adwuma no?

Standard production taa gye bɛyɛ adwuma nnafua 10-14 wɔ specification, dodow, packaging ne payment a wɔahyɛ no den akyi.

Nsɛm bɛn na ehia ma asɛm bi a wɔafa aka?

Fa ade a wɔahyɛ no ma, nkwa nna a wɔhwehwɛ, nhyehyɛe, ne kɛse, ne tɛtrɛtɛ, ne roll dimensions, forming depth, OTR, WVTR, seal type, lidding film, dodow ne baabi a wɔrekɔ no ma.

Nya Amanneɛbɔ Akwanside Film Quote

Ɛfa HSQY Plastic Kuw ho

Changzhou Huisu Qinye Plastic Group Co., Ltd. de PET / PE multilayer sini, akwanside a ɛkorɔn laminates, thermoforming nkrataa, lidding films, PET trays, PP trays ne CPET aduan-packaging nneɛma ma.

HSQY boa amanaman ntam nnuan a wɔyɛ, thermoforming nnwumakuw, packaging converters ne distributors denam nneɛma a wɔpaw, nhwɛsode nhwehwɛmu, amanne kwan so adeyɛ, mfiridwuma ho nkrataa ne export delivers.

Bisa Quote ne Nhwɛsode