multilayer films PET /PE kple mɔxenu laminate bubuwo

PET /PE Multilayer Films kple High-Barrier Laminates

HSQY wɔa PET /PE multilayer films kple mɔxenu laminates siwo wowɔ ɖe ɖoɖo nu hena dzoxɔxɔ ƒe wɔwɔme, form-fill-seal packaging, tray wɔwɔ, lã babla, tɔmelã babla, cheese babla kple nuɖuɖu alo dɔwɔƒewo ƒe dɔwɔwɔ bubuwo.

PET /PE ƒe wɔwɔme si woɖo ɖi la ƒoa PET -si wotu ɖe wɔwɔme ƒe ƒuƒoƒo si me kɔ kple polyethylene ƒe nutrenu ƒuƒoƒo si ade 50μm nu ƒu. PET ƒuƒoƒoa naa eme kɔ, sesẽ, mɔ̃ ƒe ŋusẽ kple dzoxɔxɔ ƒe dɔwɔwɔ, gake PE ƒuƒoƒoa naa dzoxɔxɔ-nutrenu ƒe ŋutete, asitɔtrɔ le nɔnɔmewo ŋu kple tsi ƒe tsitretsitsi.

Mele be woaɖɔ standard PET /PE le eɖokui si be enye oxygen-barrier structure si lolo ŋutɔ o. Dɔwɔwɔ siwo bia be woadidi ɣeyiɣi didi, yame ƒe nubablɛ siwo ŋu wotrɔ asi le alo oxygen-kaka ƒe dɔwɔwɔ si bɔbɔ ate ŋu abia PET /EVOH/PE, PET /PVDC/PE, PA/EVOH/PE alo mɔxenu laminate bubu si wodo kpɔ.

HSQY naa film siwo me kɔ alo esiwo wowɔ ɖe ɖoɖo nu le agbalẽ xatsaxatsa ƒe nɔnɔme me kple nu vevi siwo ƒe didime nye inch 3 alo inch 6. Woate ŋu atrɔ asi le eƒe titrime bliboa, agbalẽ xatsaxatsa ƒe kekeme, agbalẽ xatsaxatsa ƒe didime, amadede, PE nutrenu ƒuƒoƒo, mɔxenu ƒe ƒuƒoƒo, anti-fog atikewɔwɔ, anti-block dzidzenu kple weld alo peel dɔwɔwɔ.

Ele be woatia xɔtuɖoɖo si sɔ le ƒuƒoƒo geɖe me le nusi wobla ɖe agba me, agbenɔƒe si hiã, oxygen-kaka ƒe agbɔsɔsɔme, tsi-yaƒoƒo ƒe kaka ƒe agbɔsɔsɔme, nudzraɖoƒe ƒe dzoxɔxɔ, dzoxɔxɔ ƒe goglome, nutsyɔnu film kple nutrenu dɔwɔnuwo nu.

Bia be Woaɖo Film ƒe Asixɔxɔ si le Multilayer    Bia Sinima ƒe Kpɔɖeŋuwo

PET /PE Film Video si me nuwo le akpa vovovowo

Kpɔ video si le ete be nàsrɔ̃ nu geɖe tso HSQY PET /PE multilayer films, roll wɔwɔ, thermoforming dɔwɔwɔwo kple customized barrier-film solutions ŋu.

Nukae Nye PET /PE Multilayer Film?

PET /PE multilayer film nye laminated packaging material si ƒoa PET -si wotu ɖe xɔtuɖoɖo ƒe ƒuƒoƒo kple polyethylene dzoxɔxɔ-nutrenu ƒuƒoƒo.

Le dzoxɔxɔ ƒe dɔwɔwɔ sesẽwo gome la, wotiaa PET -si wotu ɖe ƒuƒoƒoa dzi zi geɖe be wòana eme nakɔ, wòasẽ, wòanye ŋusẽkpɔɖeamedzi ƒe dɔwɔwɔ kple nuwɔwɔ ƒe nuwɔna si li ke. Woda PE ƒe ƒuƒoƒoa ɖe nutrenu ƒe akpa dzi ale be woate ŋu atsɔ PE-nutrenu ƒe nutsyɔnu film si sɔ atre agba si wowɔ alo ete ƒe web la nu.

Woate ŋu atsɔ nusi wotsɔ wɔe la ana abe weld-seal grade si wozãna ɖaa ene na nutrenu sesẽ siwo nɔa anyi ɖaa alo abe peel grade si dzi wokpɔna ene na nubablɛ siwo wòle be woaʋu evɔ womavuvu fũ alo atɔtɔ nuawo o.

Le nusiwo sea veve ɖe oxygen, ʋeʋẽ lilili ƒe bu alo gas ƒe asitɔtrɔ gome la, woateŋu atsɔ EVOH, PVDC, aluminum, metallized alo dɔwɔwɔ ƒe mɔxenu bubu akpe ɖe eŋu. Ele be woatu ɖoɖo si wobia la ɖe nubablɛ ƒe dɔwɔwɔ si wodzidze dzi tsɔ wu be woatu nya si wozãna le xexeame katã 'mɔxenu kɔkɔ.' dzi.

PET /PE Film Mɔ̃ɖaŋununya Ŋuti Nyatakaka gbalẽvi

Dzro mɔ̃ɖaŋu ŋuti nyatakaka gbalẽvi si li si le ete la me. Hafi nàbia nu la, ɖo kpe edzi be nuŋlɔɖia ƒe tɔtrɔ, ƒuƒoƒoa ƒe wɔwɔme, eƒe titrime bliboa kple nɔnɔme siwo wodo kpɔ la sɔ kple nusi wobia.

   Wɔ PET /PE Film ƒe Nyatakakagbalẽvi ƒe kɔpi

PET /PE Multilayer Film ƒe Nɔnɔmewo

Ele be woaŋlɔ ƒuƒoƒo mamlɛtɔ ƒe wɔwɔme, eƒe titrime bliboa, ƒuƒoƒo ɖekaɖeka ƒe titrime, kekeme ƒe mɔɖeɖe, agbalẽ xatsaxatsa ƒe didime, nutrenu ƒe akpa, mɔxenu ƒe dzidzeme kple nuɖuɖu-kadodo ƒe nudidiwo ɖe nɔnɔme si dzi woda asi ɖo me hafi woawɔe.

Alesi Layer Ðesiaɖe Wɔa Dɔe

PET Dɔwɔɖoɖo ƒe Ƒuƒoƒo

PET -si wotu ɖe ƒuƒoƒoa dzi naa nukpɔkpɔ, sesẽ, didime ƒe kpekpeɖeŋu, tensile ŋusẽ kple vevitɔ si wɔa akpata la.

PE Dzoxɔxɔ-Nu Nutrenu Layer

PE layer la naa nutrenu ƒe anyigba si sɔ, asitɔtrɔ le nɔnɔmewo ŋu kple tsi ƒe tsitretsitsi. Eƒe wɔwɔme kpɔa ŋusẽ ɖe nutrenu-gɔmedzedze ƒe dzoxɔxɔ, dzoxɔxɔ tack, peel ŋusẽ kple ɖiƒoƒo dzi ɖuɖu dzi.

EVOH Oxygen-Mɔxenu ƒe Ƒuƒoƒo

EVOH ateŋu ana tsitretsitsi ɖe oxygen, ʋeʋẽ lilili kple ya ŋu nanyo ɖe edzi ŋutɔ. Eƒe mɔxenu ƒe dɔwɔwɔ nɔ te ɖe EVOH ƒe dzesi, ƒuƒoƒo ƒe titrime, fafa, dzoxɔxɔ kple ametakpɔkpɔ si ƒuƒoƒo siwo te ɖe eŋu nana dzi.

Tie alo Adhesive Layer ƒe ƒuƒoƒo

Tie resin alo lamination adhesive blaa polymers siwo meléna ɖe wo nɔewo ŋu nyuie le dzɔdzɔme nu o. Adhesive tiatia ateŋu akpɔ ŋusẽ ɖe delamination tsitretsitsi, nuɖuɖu-kadodo ƒe nyonyo kple tsitsi ƒe dɔwɔwɔ dzi.

PA Mɔ̃ɖaŋununya ƒe Ƒuƒoƒo

Woateŋu atsɔ polyamide akpe ɖe eŋu le afisiwo nutata goglo, flex-crack tsitretsitsi alo puncture tsitretsitsi le vevie wu rigidity of a standard PET -based web.

Film ƒe Dɔwɔɖoɖo Siwo Le Deŋgɔ kple Mɔxenu Gãwo

Xɔtuɖaŋu ƒe ŋkɔwo ɖeɖe mesɔ gbɔ be woagblɔ agbenɔƒe si woatsɔ adzrae ɖi o. Ame ɖekaɖekawo ƒe ƒuƒoƒo ƒe titrime, package geometry, seals, nudzraɖoƒe ƒe fafa, dzoxɔxɔ kple nusi wowɔ ƒe gbɔgbɔ ateŋu akpɔ ŋusẽ ɖe dɔwɔwɔ mamlɛtɔ dzi vevie.

Mɔxenu ƒe Dɔwɔwɔ: OTR kple WVTR

Oxygen ƒe Dɔléle ƒe Agbɔsɔsɔme

OTR dzidzea oxygen agbɔsɔsɔme si toa film me le dodokpɔ ƒe nɔnɔme siwo woɖe fia me. Asixɔxɔ siwo bɔbɔ wu ɖee fia be oxygen-mɔxenu ƒe dɔwɔwɔ lolo wu.

Ele be woagblɔ OTR ɣesiaɣi kpe ɖe dodokpɔmɔnu, dzoxɔxɔ, fafa si sɔ, film ƒe titrime kple dzidzenu ƒe akpa ŋu.

Tsi-Dzudzɔ ƒe Kakaɖedzi ƒe Agbɔsɔsɔme

WVTR dzidzea tsidzadza-yaƒoƒo ƒe kaka le dodokpɔ ƒe nɔnɔme siwo woɖe fia me. Zi geɖe la, PE naa tsi ƒe tsitretsitsi si ŋu viɖe le, gake WVTR mamlɛtɔ nɔ te ɖe ƒuƒoƒoa ƒe wɔwɔme bliboa kple eƒe titrime dzi.

Agbenɔƒe ƒe Agbenɔƒe ƒe Dzesidede

Film ŋuti nyatakakawo mate ŋu aka ɖe adzɔnu aɖe koŋ ƒe agbenɔƒe dzi le wo ɖokui si o. Ele be dodokpɔ siwo woawɔ le nudzraɖoƒe ƒe agbenɔƒe ŋu nazã nusi wowɔ ŋutɔŋutɔ, tray ƒe nɔnɔme, film si le etame, nutrenu ƒe nɔnɔmewo, gas ƒe tsakatsaka, mama ƒe dzoxɔxɔ kple nudzraɖoƒe ƒe ɣeyiɣi.

Weld, Easy-Peel kple Resealable Tiatiawɔblɔɖe

Nutrenu ƒe nuwɔna nɔ te ɖe web si le ete kple film si le etame siaa dzi. Ele be woado nu eveawo kpɔ abe nubablɛ ƒe ɖoɖo ɖeka ene le nutrenu ŋutɔŋutɔ dzi.

Thermoforming kple Form-Fill-Seal ƒe Dɔwɔwɔ

Dzoxɔxɔ ƒe Dzoxɔxɔ

Ele be woatrɔ asi le dzoxɔxɔ ƒe nɔnɔmewo ŋu le eƒe titrime bliboa, PET ƒe grade, wɔwɔme ƒe goglome, mɔ̃a ƒe nɔnɔme, dzoxɔxɔ ƒe teƒewo kple fli ƒe duƒuƒu nu. Mele be woatsɔ xexeame katã ƒe wɔwɔme ƒe dzoxɔxɔ ɖeka awɔ xɔtuɖoɖo ɖesiaɖe o.

Goglome kple Draw Ratio wɔwɔ

Do siwo goglo wu hiã be woama nu geɖe wu eye woate ŋu ana dzogoe tsɛwo alo flanges siwo gbɔdzɔ. Ele be nuƒlelawo nana do ƒe didime, dzogoe ƒe didime kple gli si wowu enu ƒe nudidi suetɔ kekeake.

Kpekpeɖeŋunana le Plug Ŋu

Plug-assisted forming ate ŋu ana gliwo ƒe mama nanyo ɖe edzi le do goglo alo esiwo sesẽ me. Ele be woatrɔ asi le plug ƒe nu, dzoxɔxɔ kple ɣeyiɣi ŋu wòanyo wu na film si nètia.

Flange ƒe gbadzaƒe

Dzoxɔxɔ ɖekawɔwɔ, nyaƒoɖeamenu wɔwɔ, fafa kple lãɖeɖe kpena ɖe ame ŋu be wòalé nutrenu gbadzaa ƒe flange ɖe te. Flanges siwo tro ate ŋu ana mɔ̃a natsi eye nutrenu ƒe nyaƒoɖeamenu si mewɔ ɖeka o.

Mɔ̃wo Dodokpɔwo

Ele be woatu mɔɖeɖe mamlɛtɔ ɖe dodokpɔ siwo wozã mɔ̃ si wotsɔ wɔa nu ŋutɔŋutɔ, aŋɔ, nutrenu dɔwɔnu, film si le etame kple nusi wowɔ dzi.

Film ƒe Dɔwɔna Siwo Wowɔna le Akpa Geɖewo Me

Lã Yeyewo ƒe Nubablɛwo

PET Woateŋu awɔ /PE kple PET /EVOH/PE filmwo le dzoxɔxɔ me woazu ete webs hena lã fafɛ ƒe bablawo. Ele be woatia xɔa le eƒe agbenɔƒe, gas ƒe tsakatsaka, lã ƒe amadede ƒe hiahiãwo kple nutrenu ƒe nɔnɔmewo nu.

Tɔmelãwo Kple Ƒumelãwo ƒe Nubablɛwo

Woateŋu azã mɔxenu laminates na tɔmelã ƒe lãgbalẽ, ƒumelã siwo wodo dzudzɔ na, ​​ƒumelã siwo woyɔna be shellfish kple ƒumelã siwo wodzra ɖo. Ele be woada alesi woate ŋu adoe, tsi ƒe tsɔtsɔ, ʋeʋẽ ƒe mɔxenu kple nufamɔ̃ ƒe dɔwɔwɔ kpɔ.

Cheese Kple Notsi ƒe Nubablɛwo

Dɔwɔwɔwo dometɔ aɖewoe nye cheese si wofli, blocks, portions kple nyinotsi me numeɖenuwo. Ele be woatsɔ oxygen ƒe mɔxenu, ʋeʋẽ lilili, lãgbalẽ ƒe nuwɔna kple nusi wowɔ ƒe gbɔgbɔ asɔ kple cheese ƒomevi.

Delicatessen kple Nuɖuɖu Siwo Ŋu Wotrɔ Asi Le

Woateŋu azã film siwo le ƒuƒoƒo geɖe me na lã siwo wofli, nuɖuɖu siwo woɖa, antipasti kple akpa siwo sɔ le afisiwo wòhiã be woaɖe wo afia eme kɔ eye woatre wo nu ɣesiaɣi.

Nuɖuɖu Siwo Woɖana Dzraɖoƒe ƒe Nubablɛwo

Mele be woaɖɔ dzidzenu PET /PE le eɖokui si be esɔ na dzoxɔxɔ yɔyɔ, pasteurization, retort dɔwɔwɔ, oven dzɔdzɔewo alo microwave gbugbɔgafa o. Dɔwɔwɔ siawo bia be woawɔ xɔtuɖoɖo si ŋu woda asi ɖo ɖe vovo si te ŋu nɔa te ɖe dzoxɔxɔ nu.

Atikewo Kple Atikewɔwɔ Ŋuti Nubablɛwo

Atikewɔwɔ kple atikewɔwɔ ƒe dɔwɔwɔ bia be woawɔ nu xoxo siwo dze ɖe vovo, wo wɔwɔ si dzi wokpɔna, wo yometiti, dzadzɛnyenye kple dɔwɔwɔ ŋuti sewo ŋuti nuŋlɔɖiwo. Mele be woazã nuɖuɖu siwo wobla ɖe agba me ƒe dzesi si wozãna ɖaa le wo ɖokui si o.

Modified-Yame kple Vacuum Packaging

Modified-Atmosphere ƒe Nubablɛwo

MAP tsɔa gas si dzi wokpɔna ƒe tsakatsaka ɖɔlia ya si le agbaa me. Ele be ete ƒe web, etame film kple nutrenuwo nalé gas ƒe wɔwɔme si hiã la me ɖe asi le agbenɔƒe si woɖo be wòanɔ anyi me.

MAP si me oxygen sɔ gbɔ ɖo le lã dzĩ me, babla siwo me oxygen mesɔ gbɔ ɖo o kple babla siwo me carbon-dioxide sɔ gbɔ ɖo ate ŋu abia mɔxenu kple nutrenu ƒe nɔnɔme vovovowo.

Vacuum ƒe Nubablɛwo

Vacuum packs hiã nutrenu sesẽwo, tsitretsitsi ɖe do ŋu eye woate ŋu atrɔ ɖe nɔnɔmewo ŋu nyuie be woawɔ ɖeka kple nusi wowɔ la. Pack siwo goglo alo esiwo mele ɖoɖo nu o ateŋu asɔ nyuie na PA-dzidzenu ƒe xɔtuɖoɖowo wu PET -si wotu ɖe web dzi sesẽ.

Vacuum-Skin ƒe Nubablɛwo

Vacuum-skin packaging bia be woatsɔ agba sesẽ alo ete web si sɔ kple ŋutigbalẽ ƒe film tɔxɛ aɖe. Ele be woado ŋutigbalẽ ƒe ƒuƒoƒo, tray sealant kple dzoxɔxɔ ƒe ɖoɖoa kpɔ abe nusi wotsɔ blae bliboe ene.

Anti-Fog, Anti-Block kple Anyigba ƒe Tiatiawɔblɔɖe

Atikewɔwɔ si Tsi Tre Ðe Afu Ŋu

Atikewɔwɔ si tsia afu nu kpena ɖe ame ŋu be tsi suesuesue siwo xea mɔ na nusiwo wowɔ ƒe dzedzeme dzi ɖeɖe kpɔtɔ. Dɔwɔwɔ nɔ te ɖe dzoxɔxɔ, fafa, nusi wowɔ ƒe tsidzadza kple atikewɔwɔ ƒe ƒomevi dzi.

Atike si Tsi Tre Ðe Block Ŋu

Anti-block additives alo surface treatments nana roll unwinding kple sheet mama nyona ɖe edzi. Anti-block si gbɔ eme ateŋu akpɔ ŋusẽ ɖe eme kɔ, keklẽ alo nutrenu dzi, eyata ele be woawɔ dzidzenua wòanyo wu.

Silicone ƒe Nutsyɔtsyɔ

Silicone ƒe nutsyɔtsyɔ ate ŋu ana denesting, forming release alo surface handling nanyo ɖe edzi. Ele be woaɖo kpe eƒe ɖekawɔwɔ kple agbalẽtata, eƒe nuléle kple nutrenu dzi.

Sinima Siwo Wota Kple Amadedewo

Woate ŋu ada xɔtunu siwo me kɔ, ɣi, yibɔ, ga si wɔa dɔ ɖe ame dzi kple esiwo ƒe amadede trɔ ɖe ɖoɖo nu la akpɔ. Film siwo wota hiã be woaɖo kpe ink, agbalẽtata ƒe akpa, adhesive kple forming distortion dzi.

Dodokpɔ Siwo Wokafu le Nubablɛwo Ŋu

• Titrime bliboa kple titrime ɖekaɖeka-layer.

• Roll kekeme, roll diameter, core lolome kple winding mɔfiame.

• Nukpɔkpɔ le gaglãgbe, haze, gloss kple amadede ƒe ɖekawɔwɔ.

• Oxygen-kaka ƒe agbɔsɔsɔme le nɔnɔme siwo woɖe fia me.

• Tsi-yaƒoƒo ƒe kaka ƒe agbɔsɔsɔme le nɔnɔme siwo woɖe fia me.

• Thermoforming dzoxɔxɔ fesre kple do gɔmeɖeɖe.

• Gli-titrime mama kple dzogoe ƒe titrime suetɔ kekeake.

• Flange gbadzaa, shrinkage kple didime li ke.

• Seal-gɔmedzedze dzoxɔxɔ kple dzoxɔxɔ-tack dɔwɔwɔ.

• Weld alo peel ƒe ŋusẽ le nutrenu ƒe nɔnɔme vovovowo me.

• Dodokpɔ le gbagbã, tsi si le dodom, amadede ƒe gege ɖe eme alo vacuum-decay dodokpɔ.

• Delamination kple interlayer kadodo ƒe ŋusẽ.

• Puncture, impact kple flex-crack tsitretsitsi.

• Anti-fog, anti-block kple mɔ̃-ʋuʋu dɔwɔwɔ.

• Adzɔnuwo ƒe agbenɔƒe kple wo mama dodokpɔwo.

Nuɖuɖu-Kadodo Kple Ðoɖowɔwɔ ƒe Nudidiwo

Nuɖuɖu-kadodo ƒe nyonyo nɔ te ɖe PET resin, PE sealant, barrier polymer, tie layer, adhesive, pigment, nusiwo wogbugbɔ zã kple kadodo ƒe nɔnɔme siwo woɖo be woawɔ dzi pɛpɛpɛ.

Ele be nuƒlelawo nagblɔ asi si me woayi, nuɖuɖu ƒomevi, akpa si woate ŋu aƒo ka na tẽ, dzoxɔxɔ, ɣeyiɣi didime, alesi woatsɔe ayɔe kple nenye be woazã film la hena tsikpe, dzoxɔxɔ ake, pasteurization alo sterilization.

RoHS ku ɖe nusiwo ŋu seɖoƒe le le elektrik kple elektrɔnik dɔwɔnuwo me ŋu eye mele be woazãe ɖeɖeko atsɔ aɖo kpe nuɖuɖu ƒe kadodo dzi sewo dzi o.

ISO 9001 kple ISO 14001 nye dɔdzikpɔkpɔ-ɖoɖo ƒe dzidzenuwo. Womeɖo kpe edzi le wo ɖokui si be sinima ɖesiaɖe si me woɖea nu vovovowo le la wɔna ɖe nuɖuɖu ƒe kadodo ŋuti sewo alo nutome ƒe nyawo dzi o.

Gbugbɔgazã Kple Nusiwo Li Eteƒe Didi Ŋu Bubuwo

PET /PE nye nu geɖe ƒe wɔwɔme. Eƒe gbugbɔgazã nɔ te ɖe ƒuƒoƒo ƒe kpekpeme si sɔ, nusiwo léna ɖe nu ŋu, mɔxenu ƒe ƒuƒoƒo, amadedewo, dzesidewo kple nutoa me nuwo gbugbɔgazã ƒe ɖoɖoa ƒe ŋutetewo dzi.

RoHS ƒe nyatakaka, ISO 14001 ƒe ɖaseɖigbalẽ alo polymer ɖekaɖeka siwo woate ŋu azã ake zazã mewɔa film bliboa si me wotsɔa lãgbalẽ geɖe wɔe la gbugbɔgazã le nuwɔna me le eɖokui si o.

Nusiwo woawɔ le nusiwo li tegbee ƒe ŋgɔyiyi ateŋu anye be woaɖe woƒe titrime bliboa dzi akpɔtɔ, woadzi PET nusiwo wogbugbɔ zã ɖe edzi le afisi woɖe mɔ le, woana xɔtuɖoɖoa nanɔ bɔbɔe, woaɖe amadede alo nusiwo wotsɔ blae dzi akpɔtɔ eye woatia aɖaŋu si sɔ kple nusiwo wogbugbɔ zã ƒe tɔsisi si woɖo taɖodzinu na.

Ele be woatsɔ xɔtuɖoɖo mamlɛtɔ, asi kple dodokpɔmɔnu si sɔ pɛpɛpɛ aɖo kpe nya siwo wogblɔna abe esiwo woate ŋu azã ake, esiwo me gblẽa nu le nutome ŋu, esiwo li tegbee alo esiwo me woɖea carbon dzi kpɔtɔna ene dzi.

Film Tiatia Siwo Wotrɔ Asi Le Le Layer Vovovowo Me

• PET /PE dzidzenu dzoxɔxɔnuwɔwɔ film.

• PET /EVOH/PE ƒe oxygen-mɔxenu gã ƒe film.

• PET /PVDC/PE kple mɔxenu ƒe xɔtuɖoɖo tɔxɛ bubuwo.

• Weld-nutrenu, bɔbɔe-peel kple dziɖuɖu-peel grades.

• Anɔ abe 0.23-0.58mm dzidzenu ƒe titrime bliboa.

• Trɔ asi le PE nutrenu-layer titrime.

• Amadede siwo me kɔ, ɣi, yibɔ kple esiwo wowɔ ɖe ɖoɖo nu.

• Anti-fog, anti-block, silicone-coated kple antistatic tiatia.

• Virgin PET alo tiatia siwo wogbugbɔ zã- PET xɔtuɖoɖo siwo woate ŋu azã.

• Trɔ asi le agbalẽ xatsaxatsa ƒe kekeme, agbalẽ xatsaxatsa ƒe didime, nuto kple ʋuʋudedi mɔfiame.

• Agbalẽtata kple agbalẽtata ɖe megbe ƒe tiatiawɔblɔɖe.

• Kpɔɖeŋuwo na wɔwɔ, nutrenu kple agbenɔƒe ƒe dodokpɔwo.

Nyatakaka Siwo Hiã Na Nyayɔyɔ

• Nusi wobla ɖe agba me kple eƒe agbenɔƒe si woɖo be wòanɔ.

• Nusiwo hiã ƒe wɔwɔme alo fifi film ƒe kpɔɖeŋu.

• Titrime bliboa kple ame ɖekaɖekawo ƒe ƒuƒoƒo ƒe nudidiwo.

• OTR kple WVTR si hiã kple dodokpɔ ƒe nɔnɔmewo.

• Roll ƒe kekeme, eƒe didime, eƒe kpekpeme kple eƒe nuto ƒe lolome.

• Thermoforming-mɔ̃ ƒe dzesi kple kpɔɖeŋu.

• Do ƒe didime, kekeme, goglome kple dzogoe ƒe didime.

• Weld, bɔbɔe-peel, burst-peel alo resealable nudidi.

• Top-film nu kple nutrenu-layer ƒomevi.

• Nutrenu ƒe dzoxɔxɔ, nyaƒoɖeamenu kple ɣeyiɣi si woanɔ anyi.

• MAP gas tsakatsaka, vacuum alo normal-yame ƒe nubablɛwo.

• Anti-fog, anti-block, agbalẽtata alo amadede ƒe nudidiwo.

• Nuɖuɖu-kadodo ƒe asi kple nuŋlɔɖi siwo wobia tso ame si.

• Dodokpɔ ƒe agbɔsɔsɔme, ɖoɖo gbãtɔ kple ƒe sia ƒe ƒe agbɔsɔsɔme.

• Destination port, packaging kple ŋkeke si wobia be woatsɔe vɛ.

Ðo Wò Mɔxenu Film Nudidiwo ɖa

Nubablɛwo Kple Wo Ðoɖoɖa

Kpɔɖeŋuwo ƒe babla: Woate ŋu atre A4-lolome PET /PE kpɔɖeŋuwo nu ɖe ​​PP kotoku me eye woabla wo ɖe ametakpɔɖaka me.

Roll packing: Wotrɔ asi le roll ƒe kpekpeme, roll diameter, core, wrapping kple pallet orientation ŋu le film ƒe didime kple asisiwo ƒe dɔwɔwɔ ƒe seɖoƒewo nu.

Cut-sheet packing: Le afisiwo wotsɔa agbalẽ siwo wotso la naa la, nufiame agba ƒe kpekpeme anɔ abe 30kg ene le akplo alo aɖaka ɖeka me, le agbalẽa ƒe didime nu.

Pallet packing: Woate ŋu atsɔ agba si ade 500-2,000kg ɖe plywood pallet dzi le agbalẽ xatsaxatsa alo agbalẽ ƒe didime nu.

Agbatsɔtsɔ le nugoe me: Agba si wotsɔ ɖoa ​​nu me la ade tɔn 20, le agbalẽ xatsaxatsa ƒe didime, pallet ƒe ɖoɖo kple mɔxexe ɖe kpekpeme nu le se nu nu.

Nudɔdɔ: Woate ŋu aɖo kpɔɖeŋuwo kple nudɔdɔ suewo ɖe DHL, FedEx, U PS alo TNT dzi. Woate ŋu aɖo nudɔdɔ gbogbo aɖewo to ƒudzi alo yameʋu me agbawo dzi.

Ðaseɖigbalẽwo Kple Dzesidede Nuŋlɔɖiwo

HSQY ateŋu ana adzɔnuwo dodokpɔ ŋuti nyatakaka siwo li, atike siwo ŋu seɖoƒe le ƒe nuŋlɔɖiwo kple dɔdzikpɔkpɔ-ɖoɖo ƒe ɖaseɖigbalẽwo be woalé ŋku ɖe wo ŋu.

Ele be nuƒlelawo naɖo kpe edzi be nyatakaka ɖesiaɖe sɔ kple PET ƒe dzeside tututu, PE nutrenu, mɔxenu ƒe ƒuƒoƒo, nusi léna ɖe nu ŋu, amadede, titrime kple alesi woɖoe be woazãe.

Nukatae Nàtia HSQY be wòanye Wò Multilayer Film Dɔwɔƒe?

HSQY Plastic Group naa PET /PE agbalẽwo, film siwo wotsɔ ƒo ƒui siwo ŋu mɔxenu gã le, nutsyɔnu filmwo, dzoxɔxɔ ƒe nuzazãwo kple nuɖuɖu-bablɛwo ƒe agbawo dukɔwo dome tɔtrɔlawo, nuɖuɖuwɔlawo kple nubablɛwo mamalawo.

• PET /PE kple PET /EVOH/PE ƒe wɔwɔme ƒe ŋgɔyiyi.

• Standard kple mɔxenu gã thermoforming filmwo.

• Weld-seal kple easy-peel tiatia.

• Trɔ asi le eƒe titrime, kekeme, nuto kple agbalẽ xatsaxatsa ƒe didime ŋu.

• Anti-fog, anti-block kple printed-film tiatia.

• Kpɔɖeŋuwo na wɔwɔ, nutrenu kple nubablɛ dodokpɔwo.

• Nuɖuɖu-kadodo ŋuti nuŋlɔɖiwo le nusiwo wogblɔ ɖi nu.

• Export packing kple dukɔwo dome meliɖoɖo ƒe kpekpeɖeŋu.

Hafi woawɔe le agbɔsɔsɔ gã me la, HSQY ɖo aɖaŋu be woada asi ɖe film si wotia dzi to nuƒlela ƒe nu ŋutɔŋutɔ, dzoxɔxɔ ƒe mɔ̃, aŋɔ, nutsyɔnu film, gas tsakatsaka kple nutrenu ƒe nɔnɔmewo zazã me.

Dzro nu me le... PET /PE laminated agbalẽ ƒe didime kple film siwo me mɔxenu gãwo le siwo wotsɔ ƒo ƒui hena xɔtuɖoɖo bubuwo.

Te ɖe HSQY ŋu hena Kpɔɖeŋuwo kple Asixɔxɔ

HSQY Xexeame Katã ƒe Nukpɔkpɔwo

HSQY ɖea film siwo wotsɔ blaa nu siwo le ƒuƒoƒo geɖe me, thermoforming sheets, lidding films kple nuɖuɖu-babla ƒe kuxiwo gbɔ kpɔnu fiana le dukɔwo dome plastic kple nubabla ƒe ɖeɖefiawo me.

Nya Siwo Wobia Enuenu Tso PET /PE Multilayer Films Ŋu

Nukae nye PET /PE multilayer film?

PET /PE multilayer film ƒoa PET -si wotu ɖe xɔtuɖoɖo ƒe ƒuƒoƒo dzi kple PE dzoxɔxɔ-nutrenu ƒuƒoƒo na dzoxɔxɔ ƒe traywo, ete webs kple form-fill-seal packaging.

Nukae PET ƒuƒoƒoa wɔna?

PET ƒuƒoƒoa naa eme kɔ, sesẽ, ŋusẽ, didime ƒe liƒo kple dzoxɔxɔ ƒe ŋutilã vevitɔ si le agbalẽvi la me.

Nukae PE layer la wɔna?

PE layer la naa dzoxɔxɔ-nutrenu ŋutete, asitɔtrɔ le nɔnɔmewo ŋu kple tsi ƒe tsitretsitsi. Efiaa weld alo peel ƒe nuwɔna ƒe akpa gãtɔ hã.

Ðe PET /PE film nye film si xea mɔ na oxygen si loloa?

Standard PET /PE naa nubablɛ ƒe dɔwɔwɔ si ŋu viɖe le, gake mele be woatsɔe ade hatsotso me le eɖokui si be enye ultra-high oxygen-barrier structure o. Ðo kpe eƒe OTR si wodzidze dzi na dɔwɔwɔ si wobia.

Vovototo kae le PET /PE kple PET /EVOH/PE dome?

PET /EVOH/PE me EVOH ƒe ƒuƒoƒo si naa tsitretsitsi ɖe oxygen, ʋeʋẽ lilili kple ya ŋu si lolo ŋutɔ wu PET /PE ƒe wɔwɔme si wozãna ɖaa.

Ɣekaɣie wòle be mazã EVOH mɔxenu?

Zi geɖe la, wotiaa EVOH na lã, tɔmelã, cheese, delicatessen kple yame ƒe nɔnɔme si ŋu wotrɔ asi le ƒe agba siwo me oxygen sea veve le si hiã be oxygen ƒe kaka nabɔbɔ ɖe anyi wu.

Ðe PET /PE film sɔ na dzoxɔxɔ ƒe wɔwɔmea?

Ɛ̃. Woateŋu awɔ PET /PE ƒe dzesi siwo sɔ la thermoformed ɖe trays kple bottom webs me. Ele be woado dzoxɔxɔ, aŋɔ ƒe nɔnɔme, wɔwɔme ƒe goglome kple fafa kpɔ le mɔ̃ ŋutɔŋutɔ dzi.

Ðe sinima la sɔ na dɔwɔnu siwo wotsɔ yɔa agbalẽviwo mea?

Ɛ̃. Ele be woatsɔ agbalẽ xatsaxatsa ƒe kekeme, eƒe nuto, nɔnɔme siwo me wowɔa nu le, indexing kple sealing ƒe dɔwɔwɔ asɔ kple FFS mɔ̃a.

Ðe woate ŋu azã PET /PE film na asitɔtrɔ-yame ƒe nubablɛwoa?

Woate ŋu azãe ne mɔxenu ƒe dɔwɔwɔ si wodzidze la ɖo MAP ƒe nudidiwo gbɔ. Nusiwo me oxygen le alo esiwo nɔa anyi didi ate ŋu abia PET /EVOH/PE.

Nukae nye OTR?

OTR nye oxygen ƒe kaka ƒe agbɔsɔsɔme. Edzidzea oxygen agbɔsɔsɔme si toa film la me le dzoxɔxɔ kple fafa ƒe nɔnɔme siwo woɖo ɖi me.

Nukae nye WVTR?

WVTR nye tsi-yaƒoƒo ƒe kaka ƒe agbɔsɔsɔme. Edzidzea tsi ƒe dzoxɔxɔ ƒe kaka to film la me le dodokpɔ ƒe nɔnɔme siwo woɖe fia me.

Vovototo kae le weld kple easy-peel film dome?

Weld film wɔa nutrenu sesẽ aɖe si nɔa anyi ɖaa. Wowɔa film si woɖena bɔbɔe be wòaʋu le ŋusẽ si dzi woɖu me evɔ mavuvu fũ alo atrɔ le tray me o.

Ðe woate ŋu atsɔ atike si tsia afu nu akpe ɖe eŋua?

Ɛ̃. Woate ŋu ada tiatia siwo tsi tre ɖe afu ŋu la akpɔ le nuɖuɖu siwo fa miamiamia kple esiwo naa tsi le afisi tsi ƒe ƒoƒo ɖea nusiwo wowɔ ƒe dzedzeme dzi kpɔtɔna le.

Ðe woate ŋu azã PET si wogbugbɔ zãa?

Xɔtuɖoɖo tiatia ateŋu anye PET si wogbugbɔ zã le nuɖuɖu-kadodo ƒe nudidiwo, dɔwɔwɔ-mɔxenu ƒe ɖoɖowɔwɔ, eme kɔ nyuie kple asisiwo ƒe nɔnɔmewo nu.

Ðe PET /PE multilayer film si woate ŋu azã akea?

PET /PE nye nu geɖe ƒe laminate. Gbugbɔgazã ŋutɔŋutɔ nɔ te ɖe layer ratio, adhesive, additives kple recycling infrastructure le destination asi me dzi.

Ðe ISO 9001 kple ISO 14001 ɖo kpe edzi be woate ŋu agbugbɔ sinima la awɔ dɔa?

Ao, wonye dɔdzikpɔkpɔ ƒe ɖoɖo ƒe dzidzenuwo eye womefia alesi woate ŋu agbugbɔ nu siwo wotsɔ blaa nu vovovowoe ƒe xɔtuɖoɖo aɖe koŋ awɔ o.

Ðe PET /PE film microwave alo oven le dediea?

Mele be woazã standard PET /PE le eɖokui si na microwave, oven, retort alo dzoxɔxɔ gã ƒe yɔyɔdɔwo o. Wobia be woatsɔ dzeside si ŋu woda asi ɖo ɖe vovo si te ŋu nɔa te ɖe dzoxɔxɔ nu.

Ðe sinima la sɔ na tsikpe mea?

Freezer ƒe nyonyo nɔ te ɖe PET ƒe wɔwɔme, ŋusẽkpɔɖeamedzi ƒe dɔwɔwɔ, nutrenu ƒe ƒuƒoƒo kple nudzraɖoƒe ƒe dzoxɔxɔ dzi. Ehiã be woadoe kpɔ le dzoxɔxɔ si bɔbɔ me.

Ðe woate ŋu atrɔ asi le sinima la ŋu wòasɔ ɖe woƒe didi nua?

Ɛ̃. Woate ŋu atrɔ asi le xɔtuɖoɖo, eƒe titrime bliboa, PE ƒuƒoƒo, kekeme, nuto, amadede, mɔxenu ƒe dzidzeme, tsitretsitsi ɖe afu ŋu, tsi tre ɖe mɔxenu kple nutrenu ƒe nuwɔna ŋu.

Nukae nye nudɔdɔ ƒe agbɔsɔsɔ suetɔ kekeake?

MOQ si wozãna ɖaa la ade 1,000kg. Xɔtuɖoɖo tɔxɛwo, amadedewo kple nusiwo wotsɔ blaa nu siwo wɔa dɔ ate ŋu abia agbɔsɔsɔ suetɔ si to vovo.

Ðe kpɔɖeŋuwo lia?

A4 agbalẽwo alo agbalẽ xatsaxatsa ƒe kpɔɖeŋu siwo seɖoƒe li na ate ŋu anɔ anyi hena dodokpɔ me kɔ, dzoxɔxɔ ƒe wɔwɔme, nutrenu kple mɔxenu ƒe dɔwɔwɔ. Zi geɖe la, nuƒlelae xea agbatsɔtsɔ si woɖona ɖe amewo.

Nukae nye ɣeyiɣi si woatsɔ awɔe?

Zi geɖe la, ewɔwɔ si wozãna ɖaa xɔa abe dɔwɔŋkeke 10-14 ene le esi woɖo kpe eƒe nɔnɔme, agbɔsɔsɔme, babla kple fexexe dzi vɔ megbe.

Nyatakaka kawoe hiã na nyayɔyɔ?

Na nusi wobla ɖe agba me, agbenɔƒe si hiã, wɔwɔme, titrime, kekeme, agbalẽ xatsaxatsa ƒe didime, wɔwɔme goglome, OTR, WVTR, nutrenu ƒomevi, nutsyɔnu film, agbɔsɔsɔme kple yiyi.

Na Dedienɔnɔ Mɔxenu Film Quote

Ku ɖe HSQY Plastic Group ŋu

Changzhou Huisu Qinye Plastic Group Co., Ltd. naa PET /PE multilayer filmwo, mɔxenu gã laminates, thermoforming agbalẽwo, nutsyɔnu films, PET trays, PP trays kple CPET nuɖuɖu-bablanuwo.

HSQY doa alɔ dukɔwo dome nuɖuɖu wɔlawo, thermoforming dɔwɔƒewo, nubablɛwo trɔlawo kple mamalawo kple nusiwo woatsɔ awɔ tiatia, kpɔɖeŋuwo me toto, ewɔwɔ ɖe ɖoɖo nu, mɔ̃ɖaŋu ŋuti nuŋlɔɖiwo kple wo ɖoɖo ɖe duta.

Bia Nya Siwo Woagblɔ Kple Kpɔɖeŋu