PET Dzoxɔxɔ ƒe Nɔnɔmewɔwɔ

Nukae Nye PET Dzoxɔxɔ ƒe Agbalẽviwo?

PET thermoforming sheets nye plastik gbadzɛ alo agbalẽ xatsaxatsa sesẽ siwo wowɔ be woado dzo, awɔ wo ɖe aŋetu dzi eye woafa wo woazu nubablɛ siwo wowɔ vɔ alo dɔwɔƒewo ƒe akpa aɖewo. Mɔnu siwo bɔ be woawɔe dometɔ aɖewoe nye vacuum wɔwɔ, nyaƒoɖeamenu wɔwɔ, plug-assist wɔwɔ kple matched-mold wɔwɔ.

HSQY naa PET agbalẽviwo ƒe nuzazãwo thermoforming dɔwɔƒewo, nuɖuɖu babla wɔlawo, blister packaging converters, agbalẽtata dɔwɔƒewo, dɔwɔƒewo ƒe akpa aɖewo wɔlawo kple wholesale mamalawo.

Nusiwo li ƒe tiatia aɖewoe nye APET, RPET, PETG, GAG kple PET/PE laminated sheet . Nu ɖesiaɖe ƒe wɔwɔme, eme kɔ, dzoxɔxɔ ƒe tsitretsitsi, nutrenu, nusiwo wogbugbɔ zã kple gazazã ƒe nɔnɔme vovovowo le esi.

Ƒome sia ku ɖe PET agbalẽ kple agbalẽ xatsaxatsa nu siwo wona abe nu xoxowo ene hena dzoxɔxɔ ƒe wɔwɔme le tsia ƒe anyime ŋu koŋ. Woateŋu adzro nuɖuɖugoe siwo wowɔ vɔ, clamshells kple nugoewo me ɖe vovo le dɔa nu.

PET Thermoforming Sheet ƒe Nyatakakawo

Tabla si gbɔna la ƒo nu tso PET thermoforming sheet ƒe tiatia siwo bɔ ŋu kpuie. Nusiwo tututu wogblɔ la nɔ te ɖe nusi wotia, wɔwɔme ƒe goglome, nusi wowɔ vɔ kple nudɔdɔ ƒe agbɔsɔsɔ dzi.

PET Nusiwo Li Na Thermoforming

PET nye ŋutilãme ƒome tsɔ wu be wòanye agbalẽ ɖeka ƒe dzeside. PET ƒe ɖoɖo nyuitɔ tiatia le vevie na wɔwɔ si li ke, akpa si wowu enu ƒe dɔwɔwɔ kple gazazã dzi kpɔkpɔ.

Nuƒlelawo ate ŋu ato HSQY ƒe nyawo me    APET ƒe agbalẽviwo,    RPET ƒe agbalẽviwo,    PETG ƒe agbalẽviwo,    GAG ƒe agbalẽviwo,    PET/PE laminated agbalẽwo kple    CPET ƒe agbalẽviwo.

Viɖe Vevi Siwo Le PET Thermoforming Sheets Ŋu

• Adzɔnuwo ƒe dzedzeme gã: APET, RPET, PETG kple GAG ​​ƒe agbalẽ siwo me kɔ la doa alɔ asitsatsa kple nuɖuɖu ƒe babla siwo me kɔ.

• Sesẽnuwɔwɔ si ŋu viɖe le: PET-gbadzɛwo ate ŋu ana xɔtuɖoɖo ƒe kpekpeɖeŋu kple nusiwo ƒe kpekpeme le sue vie.

• Dɔwɔwɔ nyuie le ŋusẽkpɔɖeamedzi: Dzeside siwo wotia nyuie la tsi tre ɖe gbagbã ŋu le wo wɔwɔ, wo ŋudɔwɔwɔ kple wo tsɔtsɔ yi teƒe bubuwo me.

• Thermoforming versatility: Woateŋu awɔ PET agbalẽwo woazu tray siwo me goglo o, do goglowo, blisters, clamshells, nutsyɔnuwo kple nusiwo wotsɔ de eme.

• Anyigba ƒe nɔnɔme tɔtrɔ: Anti-fog, anti-static, matte, silicone, anti-block kple tata-treated grades li.

• Nuɖuɖu babla ƒe tiatia: Woate ŋu ana nuɖuɖu ƒe kadodo ƒe dzesiwo na dɔbiagbalẽvi siwo dze ne wogblɔe hafi wowɔe.

• Tiatia siwo wowɔ le nusiwo wogbugbɔ zã ŋu: RPET ƒe xɔtuɖoɖowo ateŋu ado alɔ dɔ siwo hiã PET nusiwo wogbugbɔ zã le nuzazã megbe alo esiwo wogbugbɔ zã.

• Roll kple sheet supply: Woate ŋu atrɔ asi le nuwo ŋu na ka siwo wowɔna le wo ɖokui si atraɖii alo dɔwɔnu siwo wotsɔ lãa agbalẽwoe.

• Dimension siwo wowɔ ɖe ɖoɖo nu: Woate ŋu atrɔ asi le eƒe titrime, kekeme, agbalẽ xatsaxatsa ƒe didime, agbalẽa ƒe didime kple eƒe babla ŋu ɖe ewɔwɔ ƒe nudidiwo nu.

PET Thermoforming Sheets ƒe Dɔwɔwɔ

Nuɖuɖugoewo Kple Nugoewo

Wozãa PET-gbadzɛ siwo me kɔ ŋutɔ tsɔ wɔa agbawo kple nugoewo na atikutsetsewo, amagbewo, abolomenuwo, sabala, deli nuɖuɖuwo, lã, ƒumelãwo, nuɖuɖuvivinuwo kple nusiwo wotsɔ fafɛ wɔe.

Nusi sɔ la nɔ te ɖe nenye be nutsyɔnu si wotsɔ hinge wɔe, nutsyɔnu si woɖe ɖe vovo, film si kekena, film si wotsɔ xea dzoxɔxɔ nu alo nutrenu bubu si wotsɔ xea nuawoe dzi.

Clamshell ƒe Nubablɛwo

Woateŋu awɔ APET kple RPET ƒe agbalẽwo le dzoxɔxɔ me woazu hinge clamshell nugoewo na atikutsetsewo, tomatos, abolomenuwo, xɔtunuwo, elektrɔniknuwo kple nuzazãwo.

Ele be woabu hinge ƒe ŋusẽ, nutsotso ƒe nɔnɔme, stacking, yaƒoƒo kple anti-fog dɔwɔwɔ ŋu le nusiwo woatsɔ awɔ tiatia me.

Blister ƒe Nubablɛwo

Woateŋu azã PET agbalẽviwo na asitsaƒewo ƒe ʋuʋudediwo, mo-nutrenu ƒe ʋuʋudediwo, ʋuʋudedi siwo xaxa, ʋuʋudedi siwo wotsɔna ƒua gbe kple ametakpɔnu bablawo na elektrɔnikmɔ̃wo, xɔtunuwo, atsyɔ̃ɖonuwo, agbalẽŋlɔnuwo kple nuƒlelawo ƒe nuzazãwo.

Adzɔnuwo ƒe goglome, undercuts, flange kekeme, card-sealing mɔnu kple anti-static nudidiwo kpɔa ŋusẽ ɖe sheet grade si sɔ dzi.

Nusiwo do ƒome kplii la li to HSQY's dzi    PET blister packaging agbalẽvi ƒe    hatsotso.

Lã Kple Ƒumelãwo ƒe Nubablɛwo

Woateŋu awɔ PET kple PET/PE agbalẽwo le dzoxɔxɔ me woazu agba sesẽwo na lã yeye, lã si ŋu wotrɔ asi le, koklolã, tɔmelã kple ƒumelãwo.

Ele be dɔ siwo hiã be woatsɔ dzoxɔxɔ atre enu la nasɔ kple agbaa ƒe anyime kple lidding-film sealant layer si sɔ. MAP alo VSP dɔwɔwɔ siwo me mɔxenu gãwo le ate ŋu abia be woawɔ ɖoɖo si wotu ɖe EVOH dzi tsɔ wu be woawɔ mono-PET si wozãna ɖaa.

Atikewɔwɔ Kple Lãmesẽnyawo Gbɔkpɔkpɔ ƒe Nubablɛwo

Woateŋu azã PETG kple PET agbalẽvi tiatia aɖewo na mɔ̃wo ƒe agbawo, ametakpɔnu siwo wotsɔ dea eme kple atikewo ƒe babla ƒe akpa siwo me eme kɔ, tsitretsitsi ɖe ŋusẽkpɔɖeamedzi ŋu kple didime ƒe ɖekawɔwɔ le vevie.

Atikewɔwɔdɔwo bia be woaɖo kpe dɔbiagbalẽvi tɔxɛwo dzi na vidzidzi, dzadzɛnyenye, nugbagbewo ƒe ɖekawɔwɔ kple se ƒe nɔnɔmewo.

Elektrɔnikmɔ̃wo Kple Dɔwɔƒewo ƒe Traywo

Woate ŋu awɔ anti-static alo conductive PET sheet grades wòazu component trays, handling trays, ametakpɔnu inserts kple packaging na elektrɔnik kpekpewo.

Ele be woagblɔ anyigba ƒe tsitretsitsi si hiã, dzadzɛnyenye, didime ƒe mɔɖeɖe ɖe nu ŋu kple elektrikŋusẽ ƒe dodo ƒe dɔwɔwɔ hafi awɔe.

Asitsaƒewo Ƒe Nukpɔkpɔwo Kple Ametakpɔnu Siwo Wotsɔ Kpɔa Nuwo Tae

Woateŋu awɔ PETG, GAG kple APET agbalẽ siwo le kpekpem wu woazu nutsyɔnu siwo me kɔ, nusiwo wodzrana ƒe akpawo, adzɔnuwo ƒe xɔwo, mɔ̃wo ƒe nutsyɔnuwo kple dɔwɔƒewo ƒe xɔwo.

Ale Si Nàtia PET Thermoforming Sheet Si Sɔ

Ðe Nusi Wowu Nu la gɔme

Dze egɔme kple dzesidede nenye be woawɔ nusi wotsɔ wɔe wòazu nuɖuɖugoe, nutsyɔnu, lãgbalẽgolo, ʋuʋudedi, dɔwɔƒewo ƒe agba, nukpɔkpɔ ƒe nutsyɔnu alo nu bubu. Dɔwɔwɔ vovovowo bia be eme nakɔ, wòasẽ, wòadze, eƒe anyigba kple nutrenu ƒe nɔnɔme vovovowo.

Ðo kpe Forming Depth dzi

Zi geɖe la, nusiwo me goglo o ate ŋu azã APET alo RPET si wozãna ɖaa. Do goglowo, dzogoe gbadzawo, nutata ƒe sɔsɔme sesẽwo alo nɔnɔme sesẽwo ate ŋu aɖe vi tso PETG, GAG, plug-assist forming alo aŋɔ ƒe nɔnɔme si wogbugbɔ trɔ me.

Tia Titrime si Sɔ

Ele be woatia nusiwo ƒe titrime le goglome si wowɔ, gli ƒe titrime si wowu enu, nusi wowɔ ƒe agba, nuƒoƒoƒu ƒe nudidi kple ʋuɖoɖo ƒe nɔnɔme siwo wokpɔ mɔ na nu.

Tiatia to agbalẽa ƒe titrime gbãtɔ dzi ko ate ŋu aflu ame elabena nusi wotsɔ wɔe la va nɔa tsɛ wu ne ele kekem ɖe aŋɔa dzi.

Kpɔe ɖa nenye be Dzoxɔxɔ ƒe Nutrenu Hiã

Standard PET metrea nu le eɖokui si ɖe nutsyɔnu ƒe film ɖesiaɖe ŋu o. Nuɖuɖugoe siwo wotsɔ dzoxɔxɔ tu ate ŋu abia PET/PE, nusi wofa nu alo nusi wotsɔ tsyɔ nu nu dzi si wowɔ koŋ na PET.

Ðo kpe Subɔsubɔdɔ ƒe Dzoxɔxɔ si Wobia dzi

Zi geɖe la, wotiaa APET si me kɔ si wozãna ɖaa na nuɖuɖu siwo wobla ɖe yame, esiwo le fridzi kple esiwo wozãna ɖaa tsɔ wu be woazãe le dzodoƒe.

Ele be woatsɔ CPET, PP si te ŋu nɔa te ɖe dzoxɔxɔ nu alo nu bubu si sɔ atsɔ ada dɔwɔwɔ siwo me wotsɔa dzoxɔxɔ dea nu me, pasteurization, microwaving, oven dzɔdzɔewo alo dzoxɔxɔ gã me nɔnɔ ɣeyiɣi didi aɖe kpɔ.

De dzesi Anyigba ƒe Dɔwɔɖoɖo si Hiã

Nuɖuɖu siwo wobla ɖe nufamɔ̃ me ate ŋu abia be woawɔ atike na wo be woatsi afu nu. Nusiwo wota ate ŋu ahiã be woawɔ dɔ na corona. Ate ŋu abia be woawɔ silikɔ alo atike si tsia mɔxenu nu be woawɔe le wo ɖokui si. Elektrɔnikmɔ̃wo ƒe babla ate ŋu abia be woawɔ dɔ si tsi tre ɖe dɔlékuiwo ŋu alo be woazɔ mɔ.

Gblɔ Nyatakaka Siwo Wogbugbɔ Zã

Ele be nuƒlela siwo hiã RPET nagblɔ nusiwo wogbugbɔ zã ƒe alafa memamã, nukpɔkpɔ ƒe mɔkpɔkpɔwo, nuɖuɖu ƒe kadodo ƒe nɔnɔmewo, amadede ƒe mɔɖeɖe ɖe nu ŋu kple teƒe si woayi ƒe asi ƒe nudidiwo.

PET Dzoxɔxɔ ƒe Dɔwɔna

1. Nusiwo woatsɔ awɔe ƒe tiatia: Wotiaa PET ƒe dzeside, eƒe titrime, eƒe kekeme kple eƒe anyigba ƒe dɔwɔwɔ le nusi wowɔ vɔ nu.

2. Agbatsɔtsɔ: Wotsɔa agbalẽ xatsaxatsa alo agbalẽ si wotso la dea dzoxɔxɔnamɔ̃a me.

3. Dzoxɔxɔ: Wodoa dzo gbadzɛa vaseɖe esime wòaɖo nɔnɔme si sɔ me be wòawɔ kristalo fũu akpa, eƒe ʋuʋu alo eƒe gotaƒe ƒe nugbegblẽ manɔmee.

4. Nuwɔwɔ: Vacuum, pressure, plug assist alo aŋe siwo sɔ la hea nusi wodo dzoe la yia nɔnɔme si hiã la me.

5. Fafa: Wofa akpa si wowɔ la esime wolée ɖe aŋɔa ŋu be eƒe didime nali ke.

6. Demolding: Wozãa aŋɔ ƒe ʋuʋu, ya dodo alo mɔ̃ ƒe kpekpeɖeŋu tsɔ ɖea akpaa ɖe go.

7. Trimming: Wozãa gakpo-se-ku, punch dɔwɔnuwo, matched-ga dɔwɔnuwo, CNC dɔwɔnuwo alo trimming ɖoɖo bubuwo tsɔ lãa web si wowɔ.

8. Dzodzro: Woléa ŋku ɖe akpa siwo wowɔ vɔ ŋu be gli ƒe titrime, eme kɔ, didime, gbagbã, webbing, afu kple anyigba ƒe nɔnɔme madeamedziwo hã.

9. Nubablɛ: Wotsɔa akpa aɖewo dea atɔ me, xlẽa wo, dea kotoku me, dea aɖaka me eye wotsɔa wo dea pallet me be woaɖo wo ɖe wo.

Thermoforming Dɔwɔna Vevi Siwo Ŋu Woabu

Sheet ƒe Dzoxɔxɔ

Nɔnɔme nyuitɔ si le wɔwɔm la nɔ te ɖe PET ƒe dzeside, eƒe titrime, dzoxɔxɔ ƒe ɖoɖo, tsatsam ƒe duƒuƒu kple hehe ƒe sɔsɔme dzi. Dzoxɔxɔ fũ ate ŋu ana wòadze anyi, alé ɖe eŋu, wòazu kristalo, afu alo teƒe siwo gbɔdzɔ, gake dzoxɔxɔ si mesɔ gbɔ o ate ŋu ana nyatakaka siwo me kɔ nyuie o eye wòagbã.

Nusiwo Wotsɔ Wɔe ƒe Tsidzadza

PET-nuawo ate ŋu axɔ tsi le wo dzadzraɖo me. Nenye be ahiã be woatsɔe aƒu gbe do ŋgɔ la, enɔ te ɖe PET ƒe dzeside, agbalẽa ƒe ŋutinya, nudzraɖoƒe ƒe nɔnɔmewo kple dzoxɔxɔ ƒe wɔwɔme dzi.

Ne kuɖɔwo, dzesi siwo le anyigba dzi alo nusiwo me mekɔ o dzɔ la, ele be nuƒlelawo nato nusiwo wodzra ɖo, tsi ƒe ƒoƒo ɖe wo me kple aɖaŋuɖoɖo siwo ku ɖe ƒuƒu ŋu na hatsotso tɔxɛa me.

Aŋɔ ƒe Aɖaŋuwɔwɔ

Aŋɔ ƒe goglome, dzogoe ƒe didime, ya ƒe dzogoe, yadoƒe-do ƒe lolome, anyigba ƒe nuwuwu, fafa kple do ƒe dometsotso katã kpɔa ŋusẽ ɖe nuawo mama kple akpa si wowu enu ƒe nyonyome dzi.

Plug-Assist ƒe Aɖaŋuwɔwɔ

Plug assists ate ŋu ana gli ƒe titrime mama nanyo ɖe edzi le do siwo goglo wu me. Ele be woatsɔ plug-nu, dzoxɔxɔ, duƒuƒu, nɔnɔme kple clearance nasɔ kple mold kple PET grade.

Fafa Ɣeyiɣi

Fafa si mesɔ gbɔ o ateŋu ahe tɔtɔ, ʋuʋudedi kple ƒuƒoƒo si meli ke o vɛ. Fafa si gbɔ eme dzia tsatsam ƒe ɣeyiɣi kple ewɔwɔ ƒe gazazã ɖe edzi.

Nyatakakadzraɖoƒewo Dzi Kpɔkpɔ

Roll flatness, winding tension, core alignment, sheet curl kple static ateŋu akpɔ ŋusẽ ɖe automatic nuɖuɖu kple indexing ƒe nyateƒetoto dzi.

PET Dzoxɔxɔ ƒe Kuxi Siwo Bɔ

PET Thermoforming Rolls vs. Lãgbalẽwo

Nuƒlela siwo hiã agbalẽ xatsaxatsa ƒe nu ate ŋu ato HSQY ƒe nuwo me    PET ƒe agbalẽ xatsaxatsawo.

Dɔwɔwɔ PET Agbalẽvi Tiatiawɔblɔɖe

Anti-Fog PET ƒe agbalẽ

Atikewɔwɔ si tsia afu nu kpena ɖe ame ŋu be tsi suesuesue siwo ate ŋu axe mɔ na nusiwo wowɔ ƒe dzedzeme le nuɖuɖu siwo wobla ɖe fridzi me dzi ɖeɖe kpɔtɔ.

Ele be woada anti-fog ƒe anyinɔnɔ kpɔ le dzoxɔxɔ si wodzra ɖo, nuɖuɖu ƒe tsidzadza, nusi wotsɔ blae ƒe akpa kple ɣeyiɣi didi si wotsɔ blae nu.

Kpɔ HSQY ƒe nyawo    PET agbalẽ siwo tsi tre ɖe afu ŋu.

Anti-Static PET ƒe agbalẽ

Atikewɔwɔ siwo tsia tre ɖe teƒe ɖeka ŋu kpena ɖe ke ƒe hehe kple nusiwo meʋãna o ƒe ƒuƒoƒo dzi kpɔtɔna le tɔtrɔ, nudzraɖoƒe kple akpa aɖewo ƒe dɔwɔwɔ me.

Silicone-Coated kple Anti-Block PET

Silicone kple anti-block dɔdamɔnu ate ŋu ana agbalẽwo ƒe mama, agbalẽ xatsaxatsa ƒe ʋuʋu, denesting kple nuɖuɖu nana le eɖokui si nanyo ɖe edzi.

Ele be atikewɔwɔ ƒe seƒe nada asɔ kple agbalẽtata, nutsyɔtsyɔ kple nutrenu ƒe nudidiwo.

PET-gbalẽvi si Wotsɔ Dadae le Corona

Corona zazã dzia ŋusẽ si le anyigba dzi ɖe edzi eye ate ŋu ana nuŋlɔtsi, nutsyɔnu kple nulénu ƒe tsidzadza nanyo ɖe edzi. Ele be nuƒlelawo nagblɔ akpa si ŋu wowɔ atike ɖo kple anyigba ƒe tete ƒe sesẽme si wobia.

Matte kple Textured PET Agbalẽvi

Matte kple textured anyigba ate ŋu aɖe keklẽ dzi akpɔtɔ, ana dzedzeme nanyo ɖe edzi alo ana asikaka nu tɔxɛ aɖe na asitsanuwo kple dɔwɔƒewo ƒe nuwɔna.

Nuɖuɖu-Kadodo PET Dzoxɔxɔ ƒe Agbalẽvi

Woate ŋu ana nuɖuɖu-kadodo PET ƒe dzesiwo na nuɖuɖugo siwo dze, clamshells, nutsyɔnu, abolomeƒe ƒe nugoewo, nusiwo wowɔ ƒe bablawo kple dɔ bubuwo wɔwɔ.

Ele be nuƒlelawo nagblɔe kɔte be:

• Nuɖuɖu ƒomevi

• Nuɖuɖu ƒe kadodo tẽ alo esi mele tẽ o

• Ɣeyiɣi si woatsɔ aƒo ka na amewo

• Dzoxɔxɔ si wodzrana ɖo kple eŋudɔwɔwɔ

• Nufamɔ̃, tsikpe, dzoxɔxɔ-yɔyɔ alo dzoxɔxɔ ake ƒe nɔnɔmewo

• Nuɖuɖu siwo me ami, acid, tsi alo ƒuƒu le

• Dukɔ alo nuto si ŋu nèɖo taɖodzinu ɖo

• Gbeƒãɖeɖe alo ʋuʋu dodokpɔ si hiã

• Ðetugbui leaƒe alo nusiwo wogbugbɔ zã ƒe nudidiwo

Ele be woaɖo kpe sedziwɔwɔ dzi na aŋɔ ƒe wɔwɔme tututu, nusiwo wogbugbɔ zã ƒe wɔwɔme, nusi wotsɔ blae, nusi wotsɔ blaa nu kple nusi wowu enu tsɔ wu be woasusui na PET ƒe agbalẽvi ɖesiaɖe.

PET Thermoforming Sheet ƒe Nyonyome Dzikpɔkpɔ

Sheet quality si li ke kpena ɖe thermoforming dɔwɔƒewo ŋu be woalé dzoxɔxɔ, indexing, forming, trimming kple finished-part performance si mewɔa tɔtrɔ o me ɖe asi.

Nusiwo sɔ siwo woatsɔ akpɔ nyonyome dzi ate ŋu anye:

• Nusiwo wotsɔ wɔe ƒe dzesidede kple wo wɔwɔ

• Titrime kple titrime ƒe mɔɖeɖe ɖe nu ŋu

• Roll alo agbalẽ xatsaxatsa ƒe kekeme mɔɖeɖe

• Sheet flatness kple agbalẽ xatsaxatsa ƒe ʋuʋu

• Nukpɔkpɔ le gaglãgbe, haze kple gloss

• Amadede ƒe ɖekawɔwɔ

• Teƒe yibɔwo, gel, kristalo teƒewo kple ɖiƒoƒo

• Anyigba ƒe ʋuʋudedi kple agbalẽ xatsaxatsa ƒe dzesiwo

• Corona alo nutsyɔnu ƒe dɔwɔwɔ

• Anti-fog alo anti-static dɔwɔwɔ ne ehiã

• Nuwɔwɔ ƒe nuwɔna kple gli-titrime mama

• Packaging kple pallet ƒe nɔnɔme

PET Sheet ƒe Nusiwo Li Eteƒe Didi Kple Wo Gbugbɔgazã Ŋu Bubuwo

Woƒoa PET nu ƒu hegbugbɔa wo zãna le asi geɖe me, eye RPET ƒe agbalẽa ate ŋu ade PET si wogbugbɔ zã la nubablɛ yeyewo kple nusiwo wotsɔ dzoxɔxɔ wɔe me.

Gake alesi woate ŋu agbugbɔ nusi wotsɔ dzoxɔxɔ wɔe si wowɔ vɔ la agbugbɔ awɔ dɔe nɔ te ɖe nu geɖe dzi wu aŋɔ si wotsɔ wɔe.

Nu vevi aɖewoe nye:

• Nutoa me nuƒoƒoƒu kple nuƒoƒoƒu ƒe xɔtuɖoɖowo

• Nusiwo me kɔ alo esiwo le amadede vovovowo me

• Ðetugbui leaƒe alo nusiwo wogbugbɔ zã

• PETG alo copolyester bubu siwo le eme

• PE nutrenu ƒuƒoƒowo

• Mɔxenu ƒe ƒuƒoƒo, nusiwo wotsɔ blaa nu kple nusiwo wotsɔna léa nu ɖe ​​nu ŋu

• Labels, inks kple film siwo kpe ɖe eŋu

• Nuɖuɖu ƒe ɖiƒoƒo

• Agbɔsɔsɔme suetɔ kekeake siwo dzi woda asi ɖo to vovototodedeameme dɔwɔƒewo me

Ele be woatu nutome ƒe nyawo ɖe nubablɛwo ƒe ɖoɖo bliboa kple asi si woɖo tae ƒe mɔfiame si ku ɖe nusiwo wogbugbɔ zãna ŋu dzi.

PET Thermoforming Sheet ƒe Tiatiawɔblɔɖe

HSQY doa alɔ PET agbalẽ kple agbalẽ xatsaxatsa dɔwo siwo wowɔ ɖe ɖoɖo nu na thermoforming wɔlawo, nuɖuɖu babla dɔwɔƒewo, mamalawo kple dɔwɔƒewo ƒe tɔtrɔlawo.

• PET nu ƒomevi si wowɔ ɖe ɖoɖo nu

• Ðetugbui leaƒe si wowɔ ɖe ɖoɖo nu kple nusiwo wogbugbɔ zã ƒe xexlẽme ƒe sɔsɔme

• Dekɔnu ƒe titrime kple mɔɖeɖe ɖe nu ŋu

• Agbalẽxatsaxatsa ƒe kekeme kple kpekpeme si wowɔ ɖe ɖoɖo nu

• Agbalẽvi ƒe didime kple kekeme si wowɔ ɖe ɖoɖo nu

• Amadede siwo me kɔ, siwo ƒe amadede le vovovo alo esiwo me mekɔ o

• Glossy, matte alo textured nuwuwu

• Atikewɔwɔ si tsia afu nu

• Atikewɔwɔ si tsi tre ɖe static alo conductive atikewɔwɔ ŋu

• Silicone alo atike si tsia mɔxexeɖedɔléle nu

• Corona ƒe atikewɔwɔ na agbalẽtata

• Film si kpɔa ame ta le akpa ɖeka alo akpa evea siaa

• PET / PE lamination alo nutrenu ƒuƒoƒo

• Dekɔnu nu vevi kple agbalẽ xatsaxatsa ƒe didime

• Kakɛ kple pallet ƒe babla siwo wowɔ ɖe ɖoɖo nu

Nubablɛwo Kple Dukɔwo Dome Nuwo Ðoɖoɖa

PET Sheet Roll ƒe Nubablɛwo

Woate ŋu akpɔ PET agbalẽ xatsaxatsawo ta kple agbalẽ xatsaxatsa, kraft pepa, nugbɔ takpɔkpɔ kple nusiwo wotsɔna ɖoa duta ƒe pallets. Ele be woatia agbalẽ xatsaxatsa ƒe ɖoɖo kple pallet ƒe wɔwɔme le agbalẽ xatsaxatsa ƒe kpekpeme kple agbaɖeɖedɔwɔnuwo nu.

Cut-Sheet ƒe Nubablɛwo

Woate ŋu aƒo agbalẽ siwo wotso la nu ƒu, axatsa wo, atsɔ dzogoedzikpewo akpɔ wo ta eye woatsɔ wo abla ɖe agba siwo wotsɔ ɖoa ​​duta dzi. Woate ŋu aƒo nu tso ametakpɔnu film alo pepa si wotsɔ ƒoa ƒui ŋu na anyigba siwo sea veve.

Nugoe-agba agbɔsɔsɔme nɔ te ɖe nuawo ƒe kpekpeme, titrime, agbalẽ xatsaxatsa ƒe kekeme, agbalẽ xatsaxatsa ƒe didime, agbalẽ xatsaxatsa ƒe didime, pallet ƒe kɔkɔme kple teƒe si woɖo tae ƒe nudidiwo dzi.

Nukatae Nàtia HSQY be wòanye Wò PET Thermoforming Sheet Dɔwɔƒe?

• PET nu geɖewo: APET, RPET, PETG, GAG, PET/PE kple CPET tiatia aɖewo li.

• Custom extrusion: Woate ŋu atrɔ asi le eƒe titrime, kekeme, amadede, anyigba kple agbalẽ xatsaxatsa ƒe ɖoɖo ŋu.

• Nuɖuɖu babla ŋuti nuteƒekpɔkpɔ: Nusiwo woatsɔ awɔ agbawo, lãgbalẽgolowo, nutsyɔnuwo, ʋuʋudediwo kple nubablɛ bubuwo li.

• Dɔwɔwɔ ƒe dɔdamɔnu: Woate ŋu aƒo nu tso atike siwo tsia afu nu, esiwo tsia tre ɖe teƒe ɖeka ŋu, silicone, esiwo tsia mɔxexeɖedɔléle nu kple agbalẽtata ƒe atikewɔwɔwo ŋu.

• Virgin kple RPET nana: Woate ŋu ada nusiwo wogbugbɔ zã ƒe xɔtuɖoɖo vovovowo kpɔ le dɔa nu.

• Agbalẽ xatsaxatsa kple agbalẽ xatsaxatsa ƒe nɔnɔmewo: Nuawo ate ŋu ado alɔ ka siwo wotsɔa agbalẽ xatsaxatsawo ɖua nu le wo ɖokui si kple dɔwɔnu siwo wotsɔ lãa agbalẽ xatsaxatsawo tsɔ wɔa dzoxɔxɔe.

• Kpɔɖeŋuwo me dzodzro: Woate ŋu awɔ ɖoɖo ɖe kpɔɖeŋuwo ŋu hena wɔwɔ, tata, nutrenu kple nukpɔkpɔ ƒe nyonyome dodokpɔwo.

• Export support: Custom packing, palletizing kple dukɔwo dome meliɖoɖo tiatia li.

• B2B quotation support: Woateŋu alé ŋku ɖe nɔnɔme tɔxɛwo ŋu le dɔwɔnuwo, dɔwɔwɔ, taɖodzinu ƒe gazazã kple ƒe sia ƒe ƒe didi nu.

Nyatakaka Siwo Hiã Na PET Thermoforming Sheet Quote

Be nàxɔ dɔwɔƒea ƒe nyatakaka si sɔ la, taflatse na nyatakaka siwo gbɔna la dometɔ geɖe alesi nàte ŋui:

• PET ƒomevi si hiã: APET, RPET, PETG, GAG, PET/PE alo xɔtuɖoɖo bubu

• Nusi wowɔ vɔ kple eŋudɔwɔwɔ

• Agbalẽa ƒe titrime kple mɔɖeɖe ɖe nu ŋu si hiã

• Roll ƒe kekeme alo cut-sheet ƒe didimewo

• Roll core diameter, didime gãtɔ kple kpekpeme gãtɔ kekeake

• Amadede si me kɔ, si me amadede le alo esi me mekɔ o

• Glossy, matte alo textured anyigba

• Anti-fog, anti-static, silicone, anti-block alo corona dɔdamɔnu

• Ðetugbui leaƒe alo nusiwo wogbugbɔ zã ƒe nudidi

• Thermoforming mɔ̃ ƒomevi

• Forming depth kple nusi wowɔ ƒe nɔnɔmetata

• Vacuum, nyaƒoɖeamenu alo plug-kpekpeɖeŋu wɔwɔ mɔnu

• Agbalẽtata, nutsyɔtsyɔ, babla alo ku-lãɖeɖe ƒe nudidi

• Dzoxɔxɔ-nutrenu kple nutsyɔnu-film ƒe nudidiwo

• Nuɖuɖu-kadodo alo sedede ƒe nudidiwo

• Nudɔdɔ ƒe agbɔsɔsɔ si wobu kple ƒe sia ƒe zazã

• Mɔnu si wobia be woatsɔ ablae

• Melidzeƒe si woɖo tae alo adrɛs si dzi woaɖoe ɖo

Nya Siwo Wobiaa Enuenu Tso PET Thermoforming Sheets Ŋu

Vovototo kae le PET ƒe agbalẽ kple PET thermoforming sheet dome?

Wowɔa PET thermoforming sheet eye wokpɔa edzi hena dzoxɔxɔ kple ewɔwɔ wòazu nusiwo le akpa etɔ̃ me. General PET sheet ate ŋu anye esi woɖo na agbalẽtata, babla, ewɔwɔ alo zazã bubuwo eye mate ŋu ana wɔwɔme ƒe dɔwɔwɔ ma ke o.

Nukae nye PET-nu nyuitɔ kekeake na nuɖuɖugoe siwo wozãna ɖaa?

Wotiaa APET si me kɔ zi geɖe na nuɖuɖugoe siwo wozãna ɖaa elabena enaa eme kɔ, eƒe sesẽme eye wònaa dzoxɔxɔ ƒe dɔwɔwɔ si me ga mele o. Woate ŋu abu RPET ŋu ne wohiã nusiwo wogbugbɔ zã.

PET gbadzɛ kae nyo wu na dzoxɔxɔ ƒe nɔnɔme si me goglo?

Zi geɖe la, wodaa PETG kple GAG ​​kpɔ be nɔnɔme siwo goglo wu alo esiwo gɔme sese sesẽ wu hã. Tiatia mamlɛtɔ nɔ te ɖe nutata ƒe xexlẽme, aŋɔ ƒe nɔnɔme, eƒe titrime, mɔ̃ ƒe ƒomevi kple nusiwo wowɔ vɔ ƒe nudidiwo dzi.

Ðe woate ŋu azã APET-gbadzɛ le dzodoƒea?

Wometrɔ asi le APET si me kɔ si wozãna ɖaa ŋu na dzodoƒe zazã si bɔ o. Zi geɖe la, nuɖuɖugo siwo woate ŋu atɔ dzoe la hiãa CPET alo nu bubu si ŋu woda asi ɖo koŋ na dzoxɔxɔ si hiã.

Ðe woate ŋu atsɔ PET thermoforming sheets ade microwave mea?

Mele be woagblɔ be PET gbalẽvi be microwave mele eme o negbe ɖe wodo nusi tututu wowɔ, nusi wowɔ, nuɖuɖu ƒe agba, dzoxɔxɔ kple dzoxɔxɔ ƒe ɣeyiɣi kpɔ eye woda asi ɖe edzi hafi.

Ðe wòhiã be woatsɔ PET-gbalẽa aƒu hafi awɔ dzoxɔxɔ ƒe nɔnɔmea?

Nudidi siwo hiã be woatsɔ aƒu gbe la toa vovo le PET ƒomevi, agbalẽa wɔwɔ ƒe mɔnu, nudzraɖoƒe ŋutinya kple ewɔwɔ ƒe mɔnu nu. Wɔ ɖe mɔ̃ɖaŋununya ƒe aɖaŋuɖoɖo siwo woɖo na klass si nètia dzi eye nàku tsidzadza me ne kuɖɔ, aŋɔ alo anyigba ƒe dzesiwo dze.

Ðe woate ŋu atsɔ PET agbalẽvi ana le agbalẽ xatsaxatsawo mea?

Ɛ̃. Woate ŋu atsɔ PET thermoforming sheet ana le agbalẽ xatsaxatsawo me na automatic forming lines. Ele be nuƒlelawo nana kekeme, titrime, nuto ƒe didime, agbalẽ xatsaxatsa ƒe didime, agbalẽ xatsaxatsa ƒe kpekpeme kple agbalẽ xatsaxatsa ƒe nudidiwo.

Ðe woate ŋu ana PET-gbadzɛwo abe agbalẽ siwo wotso enea?

Ɛ̃. Woate ŋu atsɔ agbalẽ siwo wotso la ana na agbalẽvi siwo ƒe lolome le titrime ƒe wɔwɔme, woƒe kpɔɖeŋuwo wɔwɔ, wo tata, asiwɔwɔ ƒe mɔ̃wo kple dɔ siwo hiã be woawɔ agbalẽawo ƒe didime siwo woɖo ɖi.

Ðe woate ŋu atsɔ dzoxɔxɔ atre PET thermoforming sheet nua?

Dzoxɔxɔ ƒe nutrenu nɔ te ɖe PET ƒe anyigba kple lidding-film sealant layer dzi. Woate ŋu ahiã PET/PE laminated sheets alo PET xɔtunu siwo wofa etɔxɛe hena tray nutrenu si ŋu kakaɖedzi le.

Vovototo kae le APET kple RPET dome?

APET ɖɔa PET agbalẽvi si ƒe nɔnɔme mele o, gake RPET ya dea dzesi PET agbalẽvi si me PET si wogbugbɔ zã. RPET ƒe agbalẽvi ate ŋu anye esi ƒe wɔwɔme si me nɔnɔme mele o kokoko gake nusiwo wogbugbɔ zã ƒe agbɔsɔsɔ si woɖo ɖi hã le eme.

Vovototo kae le APET kple PETG dome?

Zi geɖe la, wotiaa APET na nubablɛ siwo me kɔ siwo mexɔ asi o kple ewɔwɔ si wozãna ɖaa. Zi geɖe la, PETG naa wɔwɔme nɔa bɔbɔe wu eye wòwɔa dɔ nyuie wu na nɔnɔme siwo goglo wu alo esiwo sesẽ wu gake ate ŋu axɔ nusiwo woatsɔ awɔe ƒe asi geɖe wu.

Nukae nye GAG ​​ƒe agbalẽ?

Zi geɖe la, GAG nyea PETG/APET/PETG coextruded sheet. PETG ƒe gotagome ƒuƒoƒoawo nana woƒe wɔwɔme kple anyigba ƒe nɔnɔme nyona ɖe edzi, gake APET ƒe nutotroe ya kpena ɖe ame ŋu be woakpɔ nuwo ƒe asi dzi.

Ðe anti-fog PET sheet nɔa anyi ɖaaa?

Anti-fog dɔwɔwɔ nɔ te ɖe atikewɔwɔ ƒomevi, nusi wotsɔ blae ƒe akpa, fafa, dzoxɔxɔ kple nudzraɖoƒe ƒe ɣeyiɣi didi dzi. Ele be nuƒlelawo nado agbalẽa kpɔ kple nuɖuɖu kple nubablɛ ƒe nɔnɔme ŋutɔŋutɔwo.

Ðe woate ŋu ata PET-gbalẽviwo hafi awɔ dzoxɔxɔ ƒe nɔnɔmea?

Ɛ̃. Woate ŋu ata PET agbalẽvi tiatia aɖewo hafi awɔ wo, gake ele be woabu nutata ƒe tɔtɔ, nuŋlɔtsi ƒe asitɔtrɔ, eƒe goglome ƒe dɔwɔwɔ, wɔwɔme ƒe goglome kple ŋkɔ dede agbalẽ me ŋu. Wokafui be woado ewɔwɔ kpɔ.

Ðe woate ŋu azã PET si wogbugbɔ zã atsɔ abla nuɖuɖua?

Woateŋu azã RPET xɔtuɖoɖo siwo dze na nuɖuɖu babla ne nusiwo wotsɔ wɔe, nusiwo wogbugbɔ zã ƒe dzɔtsoƒe kple xɔtutu wɔ ɖe teƒe si woayi-asi ƒe nudidi siwo sɔ dzi. Ele be woaɖo kpe nuŋlɔɖiwo dzi na atike si tututu wowɔ.

Ðe woate ŋu agbugbɔ atike siwo wotsɔ dzoxɔxɔ wɔe siwo wotsɔ PET wɔe la awɔ dɔea?

Woate ŋu agbugbɔ PET-nuawo awɔ le afisiwo nuƒoƒoƒu kple wo gbugbɔgazã ƒe ɖoɖo nyuiwo le. Lɔlɔ̃ ɖe edzi ŋutɔŋutɔ nɔ te ɖe amadede, dzesidewo, nusiwo wotsɔ blae, PETG ƒe agbɔsɔsɔ, PE ƒe ƒuƒoƒo, ɖiƒoƒo kple nutoa me ƒe se siwo ku ɖe nusiwo wogbugbɔ zãna ŋu.

Nukae hea dzesi ɣiwo vɛ le PET thermoforming megbe?

Dzesi ɣiwo ate ŋu atso nuteɖeamedzi, keke fũ akpa, dzoxɔxɔ si le wɔwɔm si bɔbɔ, aŋɔ ƒe dzogoe ɖaɖɛwo, kristalo alo nusiwo gblẽ gbɔ. Ele be woato dzoxɔxɔnamɔ̃ ƒe ɖoɖowo, didime, wɔwɔ ƒe duƒuƒu kple nusiwo wotsɔ wɔe ƒe grade me.

Nukae nye MOQ na PET thermoforming agbalẽwo?

MOQ nɔ te ɖe PET ƒe ƒomevi, eƒe titrime, kekeme, amadede, nusiwo wogbugbɔ zã ƒe sɔsɔme kple dɔwɔwɔ ƒe atikewɔwɔ dzi. Zi geɖe la, nudidi siwo te ŋu trɔna bɔbɔe wu amadede alo nusiwo wotsɔ blaa nu ɖe ​​ɖoɖo nu ƒe nɔnɔme siwo me kɔ si wozãna ɖaa.

Ðe mate ŋu abia PET gbalẽvi ƒe kpɔɖeŋuwo hafi abia?

Ɛ̃. Woateŋu adzro kpɔɖeŋuwo me hena dzoxɔxɔ ƒe nɔnɔme, agbalẽtata, dzoxɔxɔ nutrenu, anti-fog, anti-static kple visual-quality evaluation. Na titrime si hiã, nusi wotsɔ wɔe kple dɔwɔwɔ ne èle kpɔɖeŋuwo biam.

Nyatakaka kawoe hiã be woatsɔ akafu PET gbalẽvi?

Na nusi wowɔ vɔ, agbalẽa ƒe titrime, agbalẽ xatsaxatsa alo agbalẽ ƒe lolome, wɔwɔ ƒe goglome, mɔ̃ ƒe ƒomevi, subɔsubɔ ƒe dzoxɔxɔ, nutrenu ƒe nudidi, anyigbadzidɔwɔwɔ, ƒe sia ƒe didi kple asi si woayi.

Bia be woana PET Thermoforming Sheet ƒe Nyayɔyɔ

Èle PET thermoforming agbalẽvi wɔla, APET agbalẽ xatsaxatsa dzrala, RPET agbalẽ gã dzrala alo PET / PE nusi wowɔ ɖe ɖoɖo nu na nuɖuɖu babla dim?

Te ɖe HSQY ŋu be nàbia nuwo ƒe aɖaŋuɖoɖowo, mɔ̃ɖaŋununya ƒe nɔnɔmewo, kpɔɖeŋuwo, dzidzenu siwo wowɔ ɖe ɖoɖo nu, dɔwɔƒe ƒe asixɔxɔ kple dukɔwo dome meliɖoɖo ŋuti nyatakakawo.

       Bia Nya Siwo Woagblɔ