HSQY PVC /PE Film thermoforme laminée

PVC /PE Laminated Thermoforming Film

HSQY PVC /PE Laminated Thermoforming Film bɛ PVC sigicogo gɛlɛn ni poliyetilɛni datugulan fara ɲɔgɔn kan dumuni foroko thermoformed, suppository pakew, unit-dose pakew ani baara wɛrɛw kama minnu bɛ forokoni wajibiya ka fara funteni-sigili baarakɛcogo kan.

PVC layini bɛ gɛlɛya, hakɛ sabatili, sɔgɔsɔgɔninjɛ kunbɛnni ani funteni-sɔrɔli seko di, ka sɔrɔ PE layini bɛ funteni-datugu ɲɔgɔn sɔrɔyɔrɔ di, ka sɛgɛsɛgɛli kɛ ani ka ji kɛlɛli wɛrɛw di.

HSQY bɛ PVC laminiw dilan minnu kɔnɔ PVC /PE , PVC /EVOH/PE ani PVC / PVDC /PE . Standard PVC /PE bɛnnen don baarakɛcogo la, yɔrɔ minnu na thermoforming ni sealing ye wajibi fɔlɔw ye, k’a sɔrɔ EVOH- walima PVDC -fɛnw bɛ se ka jateminɛ ni oksizɛni walima jisuma barika baarakɛcogo ka bon kosɛbɛ.

HSQY PVC lamini kunnafoniw bɔlen bɛ milimɛtɛrɛ 0,1–1,5 ɲɔgɔn bɔ u bɛɛ lajɛlen na, u bonya bɛ se milimɛtɛrɛ 840 ɲɔgɔn ma , ani kulɛri jɛlenw, nɛrɛma, fin walima minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye. PVC janya tigitigi, PE layini, a bonya, a kɔnɔna hakɛ ani a rollo cogoya ka kan ka dafa pakew dilanni sira laɲininen na.

Fɛn dilannenw ka ɲɛfɔliba: PVC /PE Film Laminated | Termoforming (Tɛrmoforming) | Layer PE min bɛ se ka datugu ni funteni ye | Peel walima Weld Seal Sugandili | Dumunifɛnw foroko | Suppositoire ka foroko | Unit-Dose ka foroko | Custom Épaisseur & Largeur | Sugandili jɛlen & Kulɛri | Barrières hautes structures (Barikɛminɛnw) minnu bɛ yen, olu bɛ sɔrɔ

Demand PVC /PE misaliw ani sɔngɔ caman

PVC /PE Laminated Film Wideyo

PVC /PE Laminated Film Ɲɛfɔliw

Fɛn minnu bɛ duguma, olu bɛ HSQY PVC laminifɛnw denbaya lajɛlen lajɛ. PVC jateminɛ tigitigi, PE janya, a bonya, rollo girinya, rollo cɛmancɛ, a kɔnɔna hakɛ, a wulicogo, a sigicogo ani a barika baarakɛcogo ka kan ka dafa sɛnɛfɛnw dilanni ɲɛfɔli kɔnɔ min dabɔra.

Jatebla kɔlɔsili: PVC /PE, PVC /EVOH/PE ani PVC / PVDC /PE ye lamini sigicogo danfaralenw ye minnu barika ni baarakɛcogo tɛ kelen ye. Fɛn tɔgɔ tigitigi ni u jɔcogo ka kan ka jira tuma bɛɛ sannifeerew kan, fɛɛrɛko kunnafoniw sɛbɛnfura min bɛ kɛ s, labeliw ani quotations kan.

Demand Current PVC /PE Ɲɛfɔliw

PVC /PE Filimu lamininen ye mun ye?

PVC /PE laminated film bɛ PVC sɔgɔlen gɛlɛn dɔ fara ɲɔgɔn kan ni poliyetilɛni sigilan ye. A ka ca a la a bɛ dilan i n’a fɔ rollstock ka kɛ pakew dilanni siraw ye minnu bɛ kɛ dingɛw ye walima sanubɔlanw sani u ka fa ani ka u datugu ni funteni ye.

PVC layini bɛ masinko jɔcogo di min ka kan ka kɛ thermoforming kama, ka sɔrɔ PE layini bɛ sigilan di ani ka nɔ bila sɛgɛsɛgɛli la, da wulicogo la ani ji kɛlɛli la.

Ka kɛɲɛ ni furakɛlicogo ni a foroko wajibiyalen ye, PVC /PE bɛ se ka kɛ dumunifɛnw na, furakisɛw, furakɛli unit hakɛw ani foroko dilannen wɛrɛw.

PVC /PE ni PET/PE Filimu lamininen

PVC /PE Jatebɔ bɛ baara kɛ cogo min na

Rigid PVC Layɛrɛ min bɛ kɛ ka fɛnw dilan

PVC layini gɛlɛn bɛ foroko, dimension sabatili ani masinko jɔcogo di dingɛ dafalen ma walima tiriwari . A janya ka kan ka sugandi ka kɛɲɛ ni ja juguya ye, a pakew hakɛ ani a gɛlɛya wajibiyalen.

PE Layɛrɛ min bɛ sigi sen kan

PE layɛrɛ bɛ datugulan di ani ka fɛn wɛrɛw sɛgɛsɛgɛ. Ka kɛɲɛ ni a kɛcogo ye, a bɛ se ka dilan walasa ka a ɲɛkisɛ kɔlɔsi walima ka a datugucogo barikama sɔrɔ.

Structure Laminée dafalen

PVC /PE lamini dafalen ka kan ka sugandi ka kɛ pakew jɔcogo dafalen ye sanni ka kɛ PVC janya dɔrɔn fɛ. Foroko juguya, sigilan jɛɲɔgɔn, fasa funteni, a maracogo ani barika ɲininiw bɛɛ bɛ se ka nɔ bila laminati wajibiyalen na.

Dosiyɛri Tekniki min bɛ yen

Sisan ɲɛ in kɔnɔ , nin kunnafoni caman PET sɛbɛnfura min bɛ kɛ . Ikomi nin fɛn in dɔnna ko PVC /PE, nin dosiye in man kan ka kɛ fɛn dilannen kɛrɛnkɛrɛnnen ye PVC /PE fɛɛrɛbɔcogo. Sannikɛlaw ka kan ka sisan PVC /PE kunnafoniw sɛbɛnfura min bɛ kɛ ani sɛgɛsɛgɛli sɛbɛnw ɲini minnu bɛ tali kɛ u la walasa ka se ka u seko sɔrɔ.

PET Kunnafoni-sɛbɛn.pdf

PVC /PE Laminated Film ka fɛn kolomaw

Termoforming (Tɛrmoforming) baarakɛcogo

Rigid PVC bɛ thermoforming seko ɲuman di pakew dilanni na ani sanubɔlanw . Sumaya cogoyaw, foroko funteni, ja juguya ani nɛnɛ ka kan ka ɲɛ lamini sugandilen na.

PE Surface min bɛ se ka datugu ni funteni ye

PE layɛrɛ bɛ sigilan di min wajibiyalen don ni datugulan bɛnnenw ye walima ni laminiw jɔcogo bɛnninw ye. Sigili kɛcogo bɛ bɔ funteni, degun, sigi waati, yɔrɔ saniya ani furuɲɔgɔnma fɛn na.

Peelable Packaging Sugandili minnu bɛ se ka kɛ

PVC /PE jɔcogo bɛ se ka labɛn ka kɛ pakew ye minnu bɛ se ka bɔ kɛnɛ kan, da wulicogo kɔrɔsilen ka kan ka kɛ yɔrɔ minnu na, o la, furakisɛ sugandilenw ni fura hakɛ kelen kɛcogo.

Ji Lakanali

PE layɛrɛ bɛ kɛ sababu ye ka jisuma kunbɛn. Yɔrɔ minnu na, fɛnw marali waati bɛ bɔ ji-dafalen barikalan ɲɛfɔlen dɔ la, aw bɛ WVTR kunnafoniw hakɛlama ɲini lamini jɔli tigitigi kama.

Kɔnɔnafili ni Flexural Performance

PVC bɛ jɔli fanga di walasa ka fɛnw dilan, ka u fa, ka u datugu ani ka u minɛ. Pake dafalenw baarakɛcogo ka kan ka jateminɛ fɛn jateminɛnan laɲininen na ani a kɔnɔna dilancogo la.

PVC /PE Laminated Film Baarakɛcogo

Supositɛriw ka foroko

PVC /PE laminati bɛ kɛ ka caya ka kɛ supositɛri pake bɛnnenw ye yɔrɔ minnu na foroko bɛ thermoformability, sealing ani controlled opening de wajibiya. Fɛn dilannenw bɛnkan, u facogo funteni ani u foroko dafalen kuntaalajan ka kan ka tiɲɛ ni u dilanni yɛrɛ ye.

Furakɛcogo Unit-Dose Packaging

PVC /PE bɛ se ka jateminɛ ni jilama walima jilama tilancɛ hakɛ kelen foroko bɛnnenw ye thermoform-fill-seal minɛnw kan. A bɛnnenya tigitigi bɛ bɔ fɛn dilannenw ka kemikaliya la, a datugucogo la ani a barika baarakɛcogo wajibiyalen na.

Sogo kuraw ni sogo dilannenw foroko

PVC /PE kalasi sugandilenw bɛ se ka kɛ thermoformed ye sogo ni dumuni dilannenw foroko kama yɔrɔ min na furakɛli dabɔlen, PE contact layer, sealing system ani dumuni ni ɲɔgɔn cɛ sɛbɛnw bɛ bɛn application ma.

Kɔnɔw, Jɛgɛw ani Foromaziw foroko

PVC /PE laminatiw fana bɛ se ka jateminɛ kɛ kɔnɔw, jɛgɛ, foromazi, pasta ani dumunifɛn wɛrɛw la minnu ka kan ka kɛ ni funteni ye ani ka u datugu ni funteni ye.

Vacuum ani Modified-Atmosphere Packaging (fiɲɛbɔlan) min bɛ kɛ ni fiɲɛ ye

Yɔrɔ minnu na, a ka kan ka kɛ ni fɛnɲɛnamafagalan walima fiɲɛ caman cili ye, aw bɛ oksizɛni tali laɲinitaw ɲɛfɔ, ji jiginni, gazi hakɛ ani a marali waati. Sanfɛ-bariyɛri PVC /EVOH/PE walima PVC / PVDC /PE sigicogo bɛ se ka bɛn ka tɛmɛ sariya PVC /PE kan.

Sɛgɛsɛgɛli kɛ HSQY PVC lamina film range ka fara PVC /PE ani barika caman jɔli kan.

PVC /PE Film Application Jaw

PVC /PE ni PVC /EVOH/PE ni PVC / PVDC /PE

PVC /PE Laminated Film sugandicogo

Foroko kɛcogo : Aw bɛ a jira ni laminati bɛna kɛ furakisɛw ye, fura hakɛw, sogo, kɔnɔ, jɛgɛ, foromazi walima fura wɛrɛ.

Janya bɛɛ lajɛlen : Aw bɛ lamini janya ni muɲuli wajibiyalen di ka kɛɲɛ ni kɔnɔna juguya, a gɛlɛya ani masin magow ye.

PVC ani PE layɛrɛw: Layidu kelen-kelen bɛɛ wajibiyalenw ɲɛfɔ yɔrɔ minnu na u bɛ dɔn sanni ka i jigi da u bonya bɛɛ lajɛlen dɔrɔn kan.

Roll width: Aw bɛ web bonya tigitigi di ani slitting tolerance min bɛ ɲini thermoforming walima packaging line fɛ.

Core ni roll size: Aw bɛ core diameter di, roll girinya min ka di aw ye ani a kɛnɛma cɛmancɛ hakɛ min ka ca.

Winding configuration: Aw bɛ a lajɛ yɔrɔ min ka kan ka ɲɛsin kɔnɔna walima kɛnɛma ma ka kɛɲɛ ni masin labɛncogo ye.

Foroko wajibiyalenw : Aw bɛ dingɛ hakɛw di, ka ja juguya, ka fɛn dilannenw dilan, ka masin modɛli ani layini teliya.

Sigili wajibiyalenw : Aw bɛ sigilan baarakɛcogo ɲɛfɔ min bɛ se ka bɔ walima min barika ka bon ani ka furuɲɔgɔnma fɛn walima a datugucogo dɔn.

Barika wajibiyalen : Aw bɛ OTR ni WVTR laɲinitaw di ni oksizɛni walima ji tali bɛ nɔ bila fɛn dilannenw sabatili la walima u marali waati la.

Facogo: Fura jilama walima furakisɛw foroko kɔnɔ, aw bɛ fura funteni ni furakisɛ walima a bɛnkan kunnafoniw di minnu bɛ tali kɛ u la.

Sugu min bɛ taa yɔrɔ la: Baara bɛna kɛ ni foroko ye jamana walima mara min na, o fɔ walasa sɛbɛnw ka se ka lajɛ minnu bɛ tali kɛ o la.

Baro kɛ Aw ka PVC /PE Packaging Porozɛ kan

PVC /PE Film bɛ se ka tiɲɛ cogo min Sani ka caman dilan

Kɔrɔbɔli min bɛ kɛ ni thermoforming ye

Aw bɛ o fɛnw boli masin yɛrɛ kan ani ka a mɔ. Aw bɛ funteni kelen-kelen bɛɛ lajɛ, a kɔnɔna ɲɛfɔli, a nkɔni janya, a dɔgɔyali, a flansɛ flakɛli ani a tigɛcogo.

Seal-Window Kɔrɔbɔli

Aw bɛ sigilan laɲininen kɔrɔbɔ funteni, degun ani sigi waati bɛnnenw na walasa ka sɛnɛfɛnw dilanni finɛtiri sabatilen sigi sen kan.

Peel ni Seal fanga

Walasa ka pakew bɔ minnu bɛ se ka bɔ, aw bɛ da wuli fanga ni a kɛcogo jateminɛ. Walasa ka sigilan barikamaw sɔrɔ, aw bɛ sigilan fanga ni a foroko dafalen dafa, a maracogo ni a tacogo makɔnɔnenw na.

Barrière Sɛgɛsɛgɛli

Ni fura sabatili bɛ bɔ oksizɛni walima ji lakanani na, aw bɛ OTR ni WVTR sɛgɛsɛgɛ lamini tigitigi la funteni ni nɛnɛ cogoya bɛnnenw na.

Fɛn dilannenw ka bɛn ɲɔgɔn ma

Ni aw bɛ furakɛli walima furakɛli siratigɛ la, aw bɛ lamini sɛgɛsɛgɛ ni a dilanni ni a facogo yɛrɛ ye. Aw bɛ pakew cogoya, taamasiyɛn dafalen, jiginni walima bɛnkan wajibiyalenw ani a maracogo sabatili jateminɛ ka kɛɲɛ ni seko ni dɔnko porogaramu ye min bɛ sirataama.

PVC /PE sɛbɛn ni rollo pakew ɲɛfɔli

Misaliw foroko : Misali sɛbɛnfura min bɛ kɛ s bɛ se ka lakana bɔrɔw ni kartɔn bɛnnenw kɔnɔ ka kɛɲɛ ni misali sariyaw ye sisan.

Sɛbɛnw foroko : Kunnafoni kɔrɔ minnu bɔra kɛnɛ kan, olu bɛ kilo 30 ɲɔgɔn bɔ bɔrɔ kelen kɔnɔ, fɛn gɛlɛn dɔw sɛbɛnfura min bɛ kɛ . Pake lakika ka kan ka dafa ka kɛɲɛ ni a bonya ni a bonya ye.

Rollo Packing: Aw bɛ rollo bonya, a kɔnɔna bonya, a girinya, a kɛnɛma cɛmancɛ, a sirili sira ani a sirili lakanani dafa ka kɛɲɛ ni fɛn sugandilen ye.

Palɛtiw foroko : Kunnafoni kɔrɔ minnu bɔra kɛnɛ kan, olu bɛ kilo 500–2000 ɲɔgɔn bɔ plywood palɛti kelen na. Sisan palɛti doni ka kan ka dafa ka kɛɲɛ ni rollo hakɛ ye, a cicogo dan ani a taayɔrɔ wajibiyalenw.

Konteyna doni: Kunnafoni kɔrɔ minnu bɔra, olu bɛ tɔni 20 ɲɔgɔn jira ci dɔw la. Doni lakika bɛ bɔ palɛtiw cogoya la, minɛn suguya, sira ani dantigɛli minnu bɛ kɛ ka ɲɛsin fɛnw cicogo ma.

Sɛnɛfɛnw dilanni waati: Kunnafoni kɔrɔ minnu bɔra kɛnɛ kan, olu bɛ tali kɛ baarakɛdon 10–14 ɲɔgɔn na. Aw bɛ sisan sɛnɛko bolodacogo dafa, fɛnw jɔcogo, u hakɛ, misali sɔnni ani u pakew dilanni wajibiyalenw bannen kɔfɛ.

Lasecogo sariyaw: Sugandili minnu bɔra kɛnɛ kan, olu ye EXW, FOB, CNF ani DDU ye. Aw ye cikan waati min bɛ sirataama, o dafa ni sisan quotation ye.

Aw ye Packing ani Container Loading Data ɲini

Ɲininkali minnu bɛ kɛ tuma caman na PVC /PE Laminated Film kan

PVC /PE filimu lamininen ye mun ye?

PVC /PE laminated film bɛ PVC sɔgɔlen gɛlɛn dɔ fara ɲɔgɔn kan ni poliyetilɛni datugulan ye. A bɛ kɛ pake dilannenw ye minnu bɛ jɔcogo gɛlɛya ni funteni-datu seko fila bɛɛ de wajibiya.

PE layɛrɛ bɛ kɛ mun na?

PE layɛrɛ bɛ yɔrɔ dɔ di min bɛ se ka datugu ni funteni ye, ka se ka fɛn caman sɛgɛsɛgɛ ani ka ji kunbɛn. A dilanni fana bɛ se ka nɔ bila a bɔli la ani a dacogo la.

Yala PVC /PE filimu bɛ se ka kɛ thermoformé ye wa?

Awɔ. PVC /PE laminated film dabɔra thermoforming baarakɛcogo bɛnnenw kama. Baarakɛcogo ka kan ka ɲɛ ka kɛɲɛ ni a janya bɛɛ lajɛlen ye, PVC formulation, cavity depth ani machine configuration.

Yala PVC /PE bɛ se ka kɛ ka furakisɛw kɛ wa?

Awɔ. PVC /PE bɛ kɛ ka caya ka ɲɛsin furakisɛw foroko bɛnnenw ma yɔrɔ minnu na thermoforming, sealing ani controlled opening de wajibiyalen don. Foroko dafalen ka kan ka tiɲɛ ni furakisɛw dilanni ni a facogo yɛrɛ ye.

Yala PVC /PE bɛ se ka kɛ furakɛli hakɛ kelen na wa?

PVC /PE bɛ se ka jateminɛ furakɛli hakɛ kelen foroko bɛnnenw na, jilama ni jilama tilayɔrɔba sugandilenw fana sen bɛ o la. Bɛnkan, taamasiyɛn dafalen, barika ɲininiw ani sɛbɛnw minnu bɛ tali kɛ o la, olu ka kan ka dafa baarakɛcogo tigitigi kama.

Fɛnɲɛnɛma jumɛnw bɛ sɔrɔ?

HSQY ka PVC lamini denbaya bɔlen bɛ milimɛtɛrɛ 0,1–1,5 ɲɔgɔn bɔ. PVC /PE jɔcogo tigitigi, a janya bɛɛ lajɛlen ani a muɲuli ka kan ka dafa ka kɛɲɛ ni pakew dilanni porozɛ ye.

Bonya jumɛnw bɛ sɔrɔ?

HSQY ka sisan PVC lamini kunnafoniw bɛ bonya bɔ fo ka se milimɛtɛrɛ 840 ɲɔgɔn ma. Aw bɛ a bonya tigitigi ni a tigɛcogo muɲuni dafa min ka kan ka kɛ fɛn dilanni sira la.

Yala PVC /PE bɛ sɔrɔ kulɛri wɛrɛw la wa?

Awɔ. HSQY bɛ sugandili jɛlenw, nɛrɛmuguma ni nɛrɛma bɔ a ka PVC laminatiw kɔnɔ, ni kulɛri wɛrɛw ye minnu bɛ kɛ ka kɛɲɛ ni ladamu ye, minnu bɛ kɛ ka kɛɲɛ ni furakɛlicogo ni komandi hakɛ ye.

Yala PVC /PE bɛ se ka bɔ a la wa?

PVC /PE jɔli bɛ se ka dilan walasa ka da wuli min bɛ se ka bɔ, yɔrɔ minnu na a mago bɛ u la. Peel fanga ni a kɛcogo ka kan ka tiɲɛ ni pake dilanni yɛrɛ ye ani a datugucogo.

Yala PVC /PE bɛ se ka oksizɛni barika caman di wa?

Standard PVC /PE man kan ka jate a yɛrɛma i n’a fɔ sugandili min ka bon kosɛbɛ. Ni oksizɛni jiginni hakɛ dɔgɔman ɲɛfɔlen dɔ wajibiyalen don, PVC /EVOH/PE, PVC / PVDC /PE walima barikalan wɛrɛ min sɛgɛsɛgɛra, o bɛ se ka bɛn kosɛbɛ.

Danfara jumɛn bɛ PVC /PE ni PVC /EVOH/PE cɛ?

PVC /PE bɛ fɔlɔ ka thermoformable PVC fara ɲɔgɔn kan ni PE sigilan ye. PVC /EVOH/PE bɛ EVOH layini dɔ fara a kan walasa ka oksizɛni-barika baara kɛcogo ɲumanba di ni a ɲɛfɔra ka ɲɛ.

Danfara jumɛn bɛ PVC /PE ni PVC / PVDC /PE cɛ?

PVC / PVDC /PE bɛ PVDC don a kɔnɔ i n’a fɔ barikalan wɛrɛ ani a bɛ se ka jateminɛ baarakɛcogo la minnu bɛ ji walima gazi lakanani caman wajibiya ka tɛmɛ PVC /PE sariyalen kan.

Yala PVC /PE bɛ se ka kɛ dumunifɛnw foroko ye wa?

PVC /PE jɔcogo sugandilenw bɛ se ka jateminɛ dumuni foroko kɔnɔ yɔrɔ min na PE ka ɲɔgɔn sɔrɔyɔrɔ, a dilanni dafalen ani dumuni ni ɲɔgɔn cɛ sɛbɛnw minnu bɛ sɔrɔ, olu bɛnnen don dumuni, funteni ani taayɔrɔ suguya laɲininen ma.

Ne ka kan ka barrier data jumɛnw ɲini?

Ni a marali waati bɛ bɔ barikalan baarakɛcogo la, aw bɛ OTR ni WVTR hakɛ sumanlenw ɲini lamini tigitigi la funteni ni nɛnɛ sɛgɛsɛgɛli cogoyaw la minnu bɛ bɛn.

Koman hakɛ fitinin ye mun ye?

Sisan HSQY PVC /PE fɛn dilannenw denbaya bɛ komandi hakɛ fitinin bɔ min bɛ kilo 1000 ɲɔgɔn bɔ. Laadalata jɔcogo, kulɛriw walima hakɛw bɛ se ka hakɛ fitininw wajibiya minnu tɛ kelen ye.

Yala ne bɛ se ka misaliw ɲini wa?

Awɔ. Baro bɛ se ka kɛ misaliw kan walasa ka jogoɲini fɔlɔ, thermoforming ani sealing jateminɛ. A ka ɲi ka sɛgɛsɛgɛli kɛ fɛn dilanni sira kan sani ka sɔn laminati jɔcogo kura ma.

Ne ka kan ka mun sɛgɛsɛgɛ sani ne ka sɔn PVC /PE filimu ma?

Aw bɛ thermoforming kɛcogo jateminɛ, ka kɔnɔna ɲɛfɔli, kogo janya tilatilali, hakɛ sabatili, sigilan finɛtiri, sɔgɔli walima sigilan fanga, pake dafalen, barika baarakɛcogo jateminɛ yɔrɔ minnu na a mago bɛ a la ani ka bɛn ni fɛn dilannen ye.

Ne ka kan ka kunnafoni jumɛnw di walasa ka quotation sɔrɔ?

Aw bɛ sigicogo wajibiyalenw di, a janya bɛɛ lajɛlen, PVC ani PE layini wajibiyalenw, a bonya, a wulicogo, a kɔnɔna hakɛ, a kulɛri, a foroko juguya, a sigicogo wajibiyalen, a foroko kɔnɔ, a barika laɲini, a hakɛ, a taayɔrɔ suguya ani a sɛbɛn wajibiyalenw.

HSQY Plastic Group ko la

HSQY Plastic Group bɛ plastiki gɛlɛnw sɛbɛnfura min bɛ kɛ , filimu thermoforming ani pakew lamininenw di jagokɛlaw ma, pakew tigɛlikɛlaw, dumuni dilannikɛlaw, furaw foroko tɔnw, feerekɛlaw ani diɲɛ kɔnɔ fɛnw donbagaw.

HSQY lamini na PVC /PE, PVC /EVOH/PE, PVC / PVDC /PE, PET/PE ani fɛn wɛrɛw bɛ yen minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye dumuni, furakɛli ani izini pakew dilanni na.

HSQY ka diɲɛ izini jiralibaw la

Jogoɲumanya ni fɛn dilannenw sɛbɛnw

Aw ye sɔngɔko sɛbɛn ɲini for PVC /PE Filimu lamininen

Aw bɛ PVC /PE laminated film ɲini ka kɛ suppositories ye, furakɛli unit doses, thermoformed dumuni foroko walima baarakɛcogo wɛrɛ min bɛ se ka kɛ wa? Aw ye aw ka jɔcogo wajibiyalenw ci HSQY ma, a bonya, a bonya, a roll specification, forming depth, sealing requirements, barrier targets, quantity and destination market.

Aw ye HSQY lajɛ walasa ka Samples ani Bulk Pricing sɔrɔ