PVC FOAM BOARD ƝƐNABƆLI
Aw bɛ pankurun jɔcogo, a sanfɛla, a density ani a sɛbɛncogo bɛn aw ka sɛbɛnni, siraw, lamini walima kabini porogaramu ma—o kɔfɛ, aw bɛ a hakɛ yɛrɛyɛrɛ tiɲɛ sani a ka dilan.
JAABI TELIKAN
PVC fomu board ye sɛbɛn ye min ka nɔgɔn, a ka gɛlɛn, a dilannen don ni PVC kɔnɔna fomulen ye. A ka c’a la, a bɛ jateminɛ taamasiyɛnw, jiralikɛnɛw, minɛnw yɔrɔw ani kɔnɔna fɛnw na bawo a bɛ se ka tigɛ, ka sira tigɛ, ka sɔgɔ, ka sɛbɛn walima ka lamini ni a ka kalasi ni a kɛcogo bɛ bɛn.
B2B sɔrɔli kama, 'PVC foam board' ye daminɛ dɔrɔn de ye. Board jɔli, a density, thickness, surface, color ani downstream processing ka kan ka sɛbɛn specification kɔnɔ ka lajɛ ciden sample dɔ kan.
BOARD DENBAYA SELECTOR
Olu ye daminɛ nafamaw ye, u tɛ diɲɛ bɛɛ ka baarakɛcogo fɔlenw ye. A laban bɛnnenya bɛ bɔ a hakɛ kofɔlen na, a bonya, a girinya ani a dilanni taabolo.
Daminɛyɔrɔ min bɛ kɛ fɛn bɛɛ lajɛlen na ni girinya dɔgɔyali ani yɔrɔ nɔgɔlen nafa ka bon jirali, sɛbɛnni walima fɛn dilanni porogaramuw la minnu ka nɔgɔn.
Sɛmɛntiya:Fari gɛlɛn jɔli min bɛ jateminɛ tuma caman na yɔrɔw la minnu bɛ sira kan, mebɛri yɔrɔw ani porozɛw la, yɔrɔ minnu na yɔrɔ walima dakun gɛlɛn ka fisa.
Sɛmɛntiya:Layɛrɛli jɔli min bɛ se ka kɛ lisi surun ye ni sannikɛlaw b’a fɛ fari ni kɔnɔna faralen ɲɔgɔn kan danfaralen don jiralifɛnw walima fɛn dilannenw kama.
Sɛmɛntiya:A decorative-surface sugandilen don kabini, kogo-panɛli ani mebɛri porogaramuw kama yɔrɔ min na finimugu ye pankurun dilen dɔ ye.
Sɛmɛntiya:SISAN FƐƐRƐW SƆRƆLI
Fɛn dɔ da wuli walasa k’a kunnafoni sisanw lajɛ, o kɔfɛ, i ka ɲinini ni baarakɛcogo laɲininen ci walasa ka kalata dafa.
Sannikɛlaw kama minnu bɛ pankurun jɔlen dɔ suma ɲɔgɔn na mebɛriw ni yɔrɔ siraw kan.
A ye fɛn dilannen lajɛSugandili min bɛ kɛ ka kabini ni kogo-panɛli porogaramuw masiri.
A ye fɛn dilannen lajɛPorogaramu minnu bɛ daminɛ ni denser rigid-sheet wajibiyalen ye.
A ye fɛn dilannen lajɛSugandili sugandilenw ka bon ani cogoya belebelew walasa ka poroze lajɛ.
A ye fɛn dilannen lajɛTablo decoratif 4×8-format walasa ka jateminɛ kɛ kabini porozɛw kama.
A ye fɛn dilannen lajɛDaminɛyɔrɔ min bɛ kɛ ni sariya ye, taamasiyɛnw ni fɛn dilanni ɲininkaliw kama.
A ye fɛn dilannen lajɛA co-extruded sheet option ka jirali ni fabricated-part sampling.
A ye fɛn dilannen lajɛSannikɛlaw kama minnu bɛ Celuka jɔli gɛlɛn dɔ jateminɛ.
A ye fɛn dilannen lajɛAPPLICATION ROUTING (ƝƐSIN ƝƐNABƆLI) ƝƐNABƆLI
Aw bɛ yɔrɔ dafalen wajibiyalen di feerekɛla ma — a kana kɛ sɛbɛn hakɛ dɔrɔn ye — walasa fɛnw sugandili ka se ka jateminɛ kɛ u dilanni ni u cogoya la.
Aw ye sɛbɛnni kɛcogo, enki kɛcogo, filɛli yɔrɔ, a kulɛri, a yɔrɔ ani ni pankurun bɛna sigi walima ni a bɛna kɛ karamɔgɔya la, o fɔ.
Misali sɛgɛsɛgɛli : enki nɔrɔli, a kulɛri, a flakɛli ani a tigɛcogo.Yɔrɔ hakɛw tila ɲɔgɔn na, foli walima u lajɛcogo, doni yɔrɔw, ja kɛcogo ani bolifɛnko wajibiyalenw.
Misali sɛgɛsɛgɛli : sirako, sirili, ɲɔgɔnjɛ ani packed-part handling.Da walima sogo baaracogo, finimugu, CNC baarakɛminɛnw sira, dakun furakɛli, fɛnɲɛnamafagalanw ani baarakɛyɔrɔ makɔnɔnen ɲɛfɔ.
Misali sɛgɛsɛgɛli : da min dilannen don ni masin ye, sirilanw, lamini ani kulɛri bɛnkan.Aw bɛ sistɛmu ja, a labɛncogo, a laban, a ladonni magow ani poroze kɛrɛnkɛrɛnnenw ka sariya labatoli sɛbɛn o sɛbɛn di.
Misali sɛgɛsɛgɛli : joli detayɛli, a labɛncogo, a sanfɛla ni a sigicogo mock-up.ƝƐFƆLI-FƆLƆ RFQ
RFQ dafalen bɛ dɔ bɔ kɔfɛ-ni-kɔfɛ, wa a bɛ feerekɛlaw ka quotations nɔgɔya ka sanga ɲɔgɔn ma. Ni nafa dɔ ma latigɛ, aw bɛ a kɛcogo ɲɛfɔ ani ka a ɲini ka misali ta hakɛ dɔ ɲini.
| RFQ foro Mun | ka kan ka fɔ | Mun na a nafa ka bon |
|---|---|---|
| Waleyali | Fɛn dilannenw ni baarakɛminɛnw sigida dafalen | A bɛ kalasi sugandili kɛ karamɔgɔya la |
| Board denbaya | Fomu hɔrɔnma, Celuka, co-extrudé walima laminée | A bɛ surface/core jɔcogo Changer |
| Sɛbɛnw cogoya | Janya × bonya, trim muɲuli ani suman/fini sira | A bɛ nɔ bila sɔrɔ ni pakew la |
| A bonya & a ka density | Laɲini ni muɲuli/yɔrɔ min bɛ sɔn | A bɛ nɔ bila girinya ni fɛn dilanni kɛcogo la |
| Surface & kulɛri | Kulɛri kode, fini, filimu walima kunnafoni min dabɔra | A bɛ sɔnni kɛcogo yelen sigi sen kan |
| Baarakɛcogo | Print, CNC sira, saw, drill, bond, laminate walima fasten | A bɛ misali sɛgɛsɛgɛliw ɲɛfɔ |
| Sɛbɛnw | Sariya walima rapɔɔri minnu wajibiyalen don poroze fɛ, olu dɔrɔn | A bɛ a yɛrɛ tanga miiriliw ma minnu tɛ dɛmɛ sɔrɔ |
| Jago | San hakɛ, komandi hakɛ, pakew, kurunbonkarila ani laɲini don | A bɛ quotation dɔ dɛmɛ min bɛ se ka baara kɛ ni a ye |
FABRICATION ƝƐNABƆLI ƝƐNABƆLI
Fɛnw ɲɛfɔli tɛ se ka kɛ taabolo kɔrɔbɔli nɔ na. Aw bɛ baara kɛ ni cidenw ka minɛnw ye, fɛnw ani sigida minnu bɛ se ka kɛ.
Aw bɛ enki walima nɔrɔli bɛnkan lajɛ, a ɲɛda labɛncogo, a furakɛcogo, a kulɛri ni a nɔrɔli ɲɛda sugandilen kan.
Aw bɛ baarakɛminɛn, balo, teliya, funteni, buruburuw, dakun cogoya ani hakɛ segin-segincogo dafa a janya laɲinilen kan.
Kɔrɔbɔli dingɛ jogo, dakun janya, fɛnɲɛnamafagalan, samali kɛcogo ani joli dilanni kɛcogo kɔrɔbɔ density ni thickness sugandilen kan.
Aw bɛ nɛgɛ walima filimu, tansiyɔn, funteni, sigi waati, dakunw ɲɛfɔli ani a yecogo sɛgɛsɛgɛ a kɛcogo kɔfɛ.
KƆRƆ SAMPLE LA KA NA PRODUCTION MA
Baara dafalen, ja, baarakɛcogo, sɔnni sariyaw ani jago magow tila ɲɔgɔn na.
Aw bɛ jɔli, a bonya, a density, surface ani color min bɛ bɛn o ma, o sugandi walasa ka kɔrɔbɔli kɛ.
Aw bɛ sɛbɛnni, masin, bonding, fixing walima assembly sɛgɛsɛgɛliw kɛ ni fɛɛrɛ laɲininen ye.
Sɛbɛn minnu sɔnna, u yecogo ɲɛfɔli, u pakew ani sɛbɛnw wajibiyalenw sɛbɛn sani aw ka komandi kɛ.
SANNI ƝƐNABƆLI ƝƐNABƆLI
Jaabi surunw sannikɛjɛkuluw, fɛn dilannikɛlaw ani fɛn dilannikɛlaw ye.
Aw ye ɲininkali kɛrɛnkɛrɛnnen dɔ kɛ poroze kɛrɛnkɛrɛnnen kanU bɛ baara Kɛ ni taabolo jɔli suguya wɛrɛw ye. A ka c’a la, fomu gansan bɛ jate sɛbɛnni ni jirali baara nɔgɔmanw kama, ka sɔrɔ Celuka bɛ jateminɛ tuma caman na yɔrɔ minnu na fari gɛlɛn walima masin da min ka gɛlɛn, o de ka fisa. Aw bɛ misali lakikaw suma ɲɔgɔn na bawo u density, formulation ani thickness fana bɛ nɔ bila jaabiw la.
Blanket assumption si man kan ka kɛ. Aw ye a jiracogo, a sigiyɔrɔ, a kuntaala, a jiginni, a kulɛri ani a poroze wajibiyalenw fɔ, o kɔ, aw bɛ jate bɛnnen ni sɛbɛnw ɲini minnu bɛ a dɛmɛ, aw mago bɛ yɔrɔ minnu na.
PVC fomu pankurun caman bɛ kɛ taamasiyɛn sɛbɛnnenw ni jiracogo baara la, nka bɛnkan bɛ bɔ pankurun sanfɛla la, enki sigicogo la ani a labɛnni na. Aw bɛ sɔn tintin nɔrɔli, furakɛli ani kulɛri ma sɛbɛnfura yɛrɛ kan.
Olu ye fɛn dilanni siraw ye minnu bɛ kɛ tuma caman na walasa ka kalasi bɛnnenw sɔrɔ. Baarakɛminɛnw sigicogo kɔrɔbɔ, dakun laban, funteni, kuru walima doncogo dilancogo, dakun janya ani density/thickness sugandilen sani u ka dilan.
Aw bɛ sɛbɛn ci, pankurun denbaya, a bonya, a bonya, a density walima a grade, surface/color, processus method, quantité, packing, destination ani sɛbɛn wajibiyalenw ci. Ja walima foto min yɔrɔ dafalen don, nafa bɛ o la ni a bɛ sɔrɔ.
Awɔ. Lasigiden misali dɔ b’a to i ka kulu ka yecogo, muɲuli ani baarakɛcogo sɛgɛsɛgɛ. Sɛbɛnni min dabɔra ani min bɛ tali kɛ misali la walasa mɔgɔ fila bɛɛ ka baara kɛ ni sɔnni basigilen kelen ye.
Aw bɛ ɲɔgɔn sanga i n’a fɔ i n’a fɔ i n’a fɔ : pankurun jɔli, a bonya ni a muɲuli, a density/grade, surface, color, packing, documentation, test sample ani jago sariyaw. Sɛbɛn kelen sɔngɔ dɔrɔn bɛ se ka fɛnw walima pakew danfara dogo.
AW LABƐNENW KA MATCH TƐKINIKƐLI KƐ wa?
HSQY bɛ se ka baara kɛ ni aw ka poroze surun ye walasa ka pankurun denbaya dɔgɔya ani ka misali walima kumasen dɔ labɛn walasa ka a dafa.
