PET /AL/PE Laminasi filimu

PET /AL/PE Lamination film min bɛ barika caman sɔrɔ

HSQY bɛ PET /AL/PE lamination films high-barriers dilan kafe, te, dumuni misɛnninw, dumuni jalenw, muguw, tulumafɛnw, balofɛnw, sokɔnɔbaganw ka dumuni, furakɛli foroko ani izini foroko minnu bɛ ji sɔrɔ.

PET /AL/PE ye pake caman dilanni ye min bɛ se ka wuli ka bɔ a nɔ na, ​​min bɛ kɛ ni kɛnɛma poliyetilɛni tereftalati filimu ye, cɛmancɛ aluminiyɔmu papiye barikalan ani kɔnɔna poliyetilɛni funteni-datugulan.

PET layini bɛ masin fanga di, hakɛ sabatili ani yɔrɔ min bɛ se ka sɛbɛn. Aluminiyɔmu papiye bɛ oksizɛni, jisuma ani yeelen balilan fɔlɔ di. PE layɛrɛ bɛ fɛn caman sɛgɛsɛgɛ, ka fɛn dilannenw ni ɲɔgɔn cɛ lakanani ani ka funteni-sigi baarakɛcogo di.

Laminate tɛ opaque ye bawo aluminiyɔmu papiye lakika bɛ a kɔnɔ. A ka c’a la, fɛn minnu ma sɛbɛn, olu bɛ i n’a fɔ warijɛ nɛgɛ, k’a sɔrɔ pake dafalenw bɛ se ka sɛbɛn kɔfɛ ni kulɛriw, ja, fɛn dilannenw kunnafoniw ani taamasiyɛnw ye minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

HSQY bɛ bɔ kɛnɛ kan, a janya bɛɛ lajɛlen bɛ se milimɛtɛrɛ 0,045 ma ka se milimɛtɛrɛ 0,35 ma ani a bonya bɛ bɔ milimɛtɛrɛ 160 na ka se milimɛtɛrɛ 2600 ma. A dilanni seko lakika bɛ bɔ layini kelen-kelen bɛɛ janya la, aliminiyɔmu papiye jateminɛnan, sɛbɛnni bonya, lamini kɛcogo, tigɛcogo, roll diameter ani packaging-machine wajibiyalenw.

PET /AL/PE filimu bɛ se ka dilan i n’a fɔ sɛbɛnfura sɛbɛnnen walima sɛbɛnbaliw, ka wuli ka kɛ bɔrɔw ye, foroko fla, bɔrɔ minnu bɛ sigi cɛmancɛ la, bɔrɔ gusɛlenw, foroko jɔlenw ani foroko suguya wɛrɛw minnu bɛ se ka kɛ ka kɛɲɛ ni mɔgɔw sago ye.

Standard PET /AL/PE man kan ka kɛ a yɛrɛma retort sterilize, tobili walima funteni caman baara wɛrɛw kama. Retort baarakɛcogo bɛ funteni caman sigicogo kɛrɛnkɛrɛnnen de wajibiya, sealant ani adhesive system.

Sɛgɛsɛgɛli kɛ ka fara o kan nɛgɛ lamini filimuw ani filimu minnu dilannen don ka kɛɲɛ ni mɔgɔw sago ye, walasa ka baara kɛ ni pakew dilanni ye minnu bɛ se ka wuli ka bɔ u nɔ na.

A ɲini PET /AL/PE Filimu sɔngɔko    Filimu misaliw ɲini

PET /AL/PE Lamination Film Jaw

PET /AL/PE Lamination Film ye mun ye?

PET /AL/PE lamination film ye pakew ye min bɛ se ka wuli ka bɔ a nɔ na, ​​min bɛ dilan ni poliyesitɛri filimu, aluminiyɔmu papiye ani polietilɛni filimu sirili ye walima ka a datugu ka kɛ fɛn kelen ye min bɛ kɛ ni fɛn caman ye.

O jɔcogo bɛ sugandi ni fɛn dɔ bɛ lakana barikama de wajibiya oksizɛni, ji ani yeelen ma ka tɛmɛ plastiki lamini jɛlen gansan bɛ se ka min di a cogo la.

A ka c’a la, filimuw bɛ siri ni lamini jalen ye, ni lamini ye min tɛ solvent ye, ni lamination extrusion ye walima ni fɛn wɛrɛ ye min dagalen don ka kɛɲɛ ni u jɔcogo ni u kɛcogo wajibiyalen ye.

Foroko laban baara bɛ bɔ filimu kelen-kelen bɛɛ la, aliminiyɔmu papiye janya, nɔrɔli, furakɛli cogoya, PE sigilan dilanni, sɛbɛnni kɛcogo, pake cogoya ani sigicogo ɲuman.

PET /AL/PE Laminasi filimu jɔcogo

PET Kɛnɛma Layidu

Kɛnɛma PET filimu bɛ sɛgɛn fanga di, a hakɛ sabatili, a bɛ se ka sɔgɔsɔgɔ ani a bɛ kɛ yɔrɔ nɔgɔlen ye walasa ka sɛbɛnni kɛ cogo ɲuman na.

Sɛbɛnni kɔfɛ, o bɛ tintiri bila PET filimu ni layini nata cɛ, o bɛ dɛmɛ don ka ja sɛbɛnnenw lakana ka bɔ sɔgɔli tilennen na fɛn caman tigɛli waati, u tacogo ani u tacogo la.

Aluminiyɔmu Foil Barrière Layer

Aluminiyɔmu papiye bɛ oksizɛni, jisuma, yeelen ultraviolet ani yeelen yelen balilan fɔlɔ di.

Foli janya ka kan ka sugandi ka kɛɲɛ ni barika wajibiyalen ye, pakew sɛgɛsɛgɛli, foli kunbɛncogo, sɔgɔli farati ani musaka.

Pinhole cogoya, creasing, flex cracking ani pake tiɲɛni bɛ se ka dɔ bɔ lamini dafalen barika la, wa a ka kan ka jateminɛ sɛgɛsɛgɛli senfɛ.

PE Kɔnɔna Sumaya-Sigiyɔrɔ

PE kɔnɔna bɛ se ka fɛn caman sɛgɛsɛgɛ ani ka lamini kɛ ka funteni datugulan kɛ bɔrɔ dilanni, a fa walima a pake laban datuguli waati.

Sigilan dilanni ka kan ka sugandi ka kɛɲɛ ni fura dilannen ye, fasa funteni, tulu walima mugu nɔgɔli, sigilan funteni, tansiyɔn, sigi waati, layini teliya ani sigilan fanga wajibiyalen.

Laminating Adhésif (Adhésif Laminant) ye

Nɛgɛ bɛ PET , aliminiyɔmu papiye ni PE layiniw siri ɲɔgɔn na ani ka nɔ bila lamini fanga la, kemikɛli kɛlɛli la, kɔrɔya, kasa ani funteni baarakɛcogo la.

Nɔrɔcogo ni furakɛli cogoya ka kan ka bɛn dumuni ma, fasacogo, a mara waati ani funteni cogoya laɲininenw ma.

PET /AL/PE Laminasi filimu ɲɛfɔli

PET Aluminiyɔmu Foil PE Film ka fɛn kolomaw

• Barika lakanani ka bon : Aluminiyɔmu papiye bɛ lakana barikama di oksizɛni, jisuma ani yeelen ma.

• . Kafe, te, tulumafɛnw ani mugumafɛnw kasa dumanw bɔnɛni dɔgɔya

• Yeelen barikalan min tɛ ye: Foyi bɛ fɛnw lakana minnu bɛ yeelen dɔn ani ka nɛgɛ cogoya dilan.

• Kɛnɛma yɔrɔ min bɛ se ka sɛbɛn: PET bɛ ja caman, taamasiyɛnw, barɔdiw ani fɛn dilannenw kunnafoniw dɛmɛ.

• Funteni-sigi baarakɛcogo : PE layɛrɛ bɛ foroko dilanni ni pake laban sirili dɛmɛ.

• Masina fanga bonya : PET bɛ dɛmɛ ka aluminiyɔmu papiye lakana ka bɔ sɛgɛn gansanw na minnu bɛ se ka wuli ani ka a minɛ.

• Ji ni tulumafɛnw tali : Kɔnɔnafɛnw bɛ se ka sugandi fɛn jalenw, tulumafɛnw walima fɛn kasadimanw kama.

• Yɛlɛma min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye: Filimu bɛ se ka tigɛ, ka sɛbɛn ani ka fɛn caman tigɛli kɛ a foroko caman kɔnɔ.

PET /AL/PE ni Barikalanba wɛrɛw

Barrière Performance ani Aluminiyɔmu Foil Integrité

Aluminiyɔmu papiye ye barikalanba ye, nka pake dafalen barikalan baarakɛcogo tɛ se ka dɔn ka bɔ fɛn tɔgɔ dɔrɔn na.

Oksizɛni ni ji-ji-la-ci lakika bɛ bɔ papiye janya la, pinɛw, lamini cogoya, foli, flex cracking, pouch seals, valves, zippers ani masin tiɲɛni fɛn o fɛn.

OTR ni WVTR hakɛw ka kan ka suman ni lamini laban ye min dabɔra ani funteni ni nɛnɛ cogoya minnu bɛnna.

Funteni-Sɔgɔli baarakɛcogo

Funteni-sigi baara bɛ bɔ PE sigilan dilanni na, sigilan funteni, degun, sigi waati, dawolo dilanni ani pake-sira teliya.

Mugu, tulu, tulumafɛnw walima fɛn tolenw minnu bɛ sigilan yɔrɔ la, olu bɛ se ka sigilan fanga dɔgɔya ani ka dɔ fara bɔgɔbɔli farati kan.

• Aw bɛ funteni-sigi daminɛ funteni jateminɛ.

• Baarakɛminɛnw sigicogo finɛtiri min sɛgɛsɛgɛra, o ɲɛfɔ.

• Aw bɛ sigilan fanga suman so ni a marayɔrɔw funteni na.

• Aw bɛ hot-tack fanga jateminɛ pakew teliyaba siraw kan.

• Aw bɛ sigicogo kɔrɔbɔ ni mugu, tulu walima ji nɔgɔli makɔnɔnen ye.

• Aw bɛ kanal bɔgɔlanw, kurukuruw, jeninidaw ani sigilanw tigɛli sɛgɛsɛgɛ.

• Aw bɛ burst, vacuum, dye-penetration walima dafalen sɛgɛsɛgɛli wɛrɛ kɛ min bɛnna a kan.

Yala PET /AL/PE Film bɛnnen don Retort Packaging ma wa?

Standard PET /AL/PE film man kan ka kɛ a yɛrɛma ka kɛ retort sterilisation ye, ka tobili kɛ funteni na walima ka tobili kɛ ni degun ye.

A ka c’a la, retort pakew bɛ kɔnɔna sigilan de wajibiya min tɛ funteni kɛlɛ i n’a fɔ CPP walima RCPP, retort-grade nɔrɔlan ani kɛnɛmafɛn min bɛ se ka sirili fanga ni pake dafalen mara funteni, degun ani nɔgɔ waatiw la.

Retort structures minnu bɛ se ka kɛ olu ye PET /AL/RCPP, PET /NY/AL/RCPP ani poroze kɛrɛnkɛrɛnnen laminiw wɛrɛw ye.

Foroko laban ka kan ka tiɲɛ ni dumuni yɛrɛ ye, asidi, tulu hakɛ, sterilize funteni, sterilize waati, degun, nɛnɛ kɛcogo ani a marali waati laɲini.

PET /AL/PE Filimu min bɛ kɛ kafe foroko kɔnɔ

PET /AL/PE ka teli ka sugandi kafe kuuru, kafe mugulen ani kafe teliya la bawo papiye dawolo bɛ mɔgɔ tanga oksizɛni, ji ani yeelen ma.

Kafe tobilen kura bɛ gazi ɲuman bɔ a tobilen kɔfɛ. O la, kafe kuuru foroko bɛ se ka kɛ ni gazi bɔlan ye min bɛ kɛ sira kelen fɛ, min bɛ a to gazi ka bɔ foroko kɔnɔ ka sɔrɔ ka dɔ bɔ kɛnɛma oksizɛni doncogo la.

• Kafe kuuru, kafe mugulen walima kafe min bɛ kɛ teliya la.

• Kafe tobilen date ani degassing profile.

• A marali waati wajibiyalen ani a maracogo funteni.

• Gazi bɔli sira kelen fɛ, o wajibiyalen don.

• Zipu, tintin kravati walima fɛn wɛrɛ min bɛ kɛ ka a datugu kokura.

• Bɔrɔ cogoya ani a girinya jɛlen.

• Aroma marali ani oksizɛni laɲini.

• Drop, burst ani transport sɛgɛsɛgɛli.

PET /AL/PE Lamination Film ka baarakɛcogo

• Kafe foroko : Shɔ kuuru, kafe mugulen, kafe min bɛ kɛ teliya la ani fɛn minnu bɛ kɛ siɲɛ kelen.

• Te foroko : Te bulu lajɔlen, te mugu, binkɛnɛ te ani foroko.

• Dumunifɛn misɛnninw foroko : Numukɛw, jiriden jalenw, shɔ, shɔ, kukisɛw ani dumuni tobilen.

• Mugu foroko : Nɔnɔmugu, farikolojɔli mugu, balomugu, minfɛn ɲagaminenw ani dumuni muguw.

• Fɛn sumalenw ni fɛn minnu bɛ kɛ ka fɛnw kɛ: Binw, fɛn dumanw, funteni, faralifɛnw ani fɛn minnu bɛ ji sɔrɔ.

• Sokɔnɔbaganw ka dumuni foroko : Sokɔnɔbaganw ka dumuni jalenw, sokɔnɔbaganw ka furaw, dumuni dafalanw ani baganw ka balo mugulenw.

• Furakɛcogo : Kisɛw, furakisɛw, muguw ani furakisɛw minnu bɛ kɛ ni furakɛlicogo ye min dagalen don.

• Furakɛcogo: Fɛn minnu bɛ ji sɔrɔ, olu ka kan ka saniya ani ka a sɛgɛsɛgɛ ka kɛɲɛ ni u kɛcogo kɛrɛnkɛrɛnnen ye.

• Industriw ka pakew : Ɛntɛrinɛti fɛnw, kemikɛlifɛnw, fɛn jalenw ani fɛn minnu bɛ ji sɔrɔ.

Roll Stock ani Packaging cogoyaw

PET /AL/PE filimu bɛ se ka dilan i n’a fɔ roll stock ka ɲɛsin pakew jiginnikɛlanw ma minnu bɛ se ka wuli, foroko dilannikɛlaw ani otomatiki fasa siraw.

• Formulaire-fill-seal roll stock jɔlen.

• Formulaire-fill-seal rouleau horizontal.

• Stick-pack ani sachet filimu.

• Foroko minnu bɛ kɛ ni kɛrɛ saba ye.

• Foroko minnu bɛ kɛ ni kɛrɛfɛla naani ye.

• Cɛmancɛ-sigilen ni fin-sigilen bɔrɔw.

• Pouches plats (sɔgɔsɔgɔninjɛ fla).

• Kɛrɛfɛ-gusset ni quad-seal bɔrɔw.

• Foroko jɔlenw.

• Zipu, valve ani bɔrɔw minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

Sɛbɛnni ni seko ni dɔnko baara minnu ka kan ka kɛ ka kɛɲɛ ni mɔgɔw sago ye

Custom reverse printing bɛ se ka kɛ PET layɛrɛ la walasa ka taamasiyɛnw kɛ, sariyaw kunnafoniw, barɔdiw, labɛnni cikanw ani ja masirilenw.

Dumuni-ɲɔgɔnna ani sariyaw ka wajibiw

Dumuni ni ɲɔgɔn cɛ bɛnnen bɛ bɔ lamini laban min dagalen don sanni ka kɛ PET , aliminiyɔmu papiye walima PE fɛn tɔgɔw dɔrɔn de la.

Jateminɛ ka kan ka kɛ PET filimu ye, PE sigilan, aliminiyɔmu papiye furakɛli, lamini nɔrɔ, sɛbɛnnikɛlan, pigment, primer, farali ani a dilanni taabolo.

Sannikɛlaw ka kan ka dumuni suguya dɔn, a magali tilennen walima a sɔrɔcogo tilennen tɛ, a falen hakɛ, a maracogo funteni, a magali waati, a sumayacogo laɲininen ani a taayɔrɔ suguya.

Sɛbɛn minnu bɛ se ka baara kɛ, olu bɛ se ka kɛ sariya labatoli jirali ye, furakɛlicogo fɔlen, jiginni sɛgɛsɛgɛli rapɔɔri, residual-solvent rapɔɔri ani sariyaw dɛmɛni kunnafoniw.

SGS ka kan ka ɲɛfɔ ka kɛɲɛ ni sɛgɛsɛgɛli tigitigi ye min kɛra. SGS walima ISO ka seere caman tɛ dumuniko, jaabi, barika walima mara waati baarakɛcogo sigi sen kan a yɛrɛma.

Fura ni izini foroko

Fura, furakɛli ani izini foroko dilanni bɛ se ka kɛ ni kɔlɔsili gɛlɛnw ye ka tɛmɛ dumuni gansanw ni fɛn jalenw foroko kan.

• Batch traceability ani fɛn caman Changement control.

• Saniya ni nɔgɔw kɛlɛli.

• Extractables ani migration jateminɛ.

• Residual-solvent dantigɛliw.

• Ji ni oksizɛni barika tiɲɛni.

• Puncture, flex-crack ani seal-integrity sɛgɛsɛgɛli.

• Teliya ni waati yɛrɛ la sabatili kalanw.

• Fɛn kɛrɛnkɛrɛnnenw ka sariyasɛbɛnw.

Segin-ka-bɔnye ani sigicogo wɛrɛw

PET /AL/PE ye laminati ye min bɛ kɛ ni fɛn caman ye, poliyesitɛri, aliminiyɔmu, poliyetilɛni ani nɔrɔlan bɛ min kɔnɔ.

O layini ninnu farali ka gɛlɛn masinw lasegincogo kɔrɔlenw na, o la, a foroko man kan ka fɔ a yɛrɛma ko a bɛ se ka segin ka kɛ fɛn wɛrɛ ye.

Segincogo lakikaw bɛ bɔ sigida lajɛw la, u tilatilali la, u lasegincogo kɛrɛnkɛrɛnnenw na, enkiw, nɛgɛw, fɛn wɛrɛw ani pakew dilanni dafalen.

Jagokɛyɔrɔ wɛrɛw i n’a fɔ mono-PE, mono-PP, barrier film transparent coated walima film metallized, olu bɛ se ka jateminɛ ni seginkanni, girinya dɔgɔyali walima fɛn dilannenw yecogo ye porozɛ ka ɲɛtaa kunba ye.

Sɛgɛsɛgɛli minnu bɛ kɛ ka ɲɛsin jogoɲumanya kɔlɔsili ma

• Fɛnw jɔcogo ani layɛrɛ dɔnni.

• Total thickness ani kelen-kelen layɛrɛ janya.

• Aluminiyɔmu papiye jateminɛlan ni pinɛw sɛgɛsɛgɛli.

• Kurukuru bonya, a janya, a cɛmancɛ, a girinya ani a kɔnɔna hakɛ.

• Winding direction, roll tension, telescoping ani dakunw labɛnni.

• Tensile strength, elongation ani puncture resistance.

• Flex-crack (flexion-crack) kɛlɛli.

• Lamination bond fanga.

• Furakɛcogo ni tolenw-sɔrɔ-sɛgɛsɛgɛli.

• Printing kulɛri, sɛbɛnni ani segin janya.

• Enki nɔrɔli, mugumugu resistance ani balili.

• OTR ni WVTR ka kɛɲɛ ni cogoya kɛrɛnkɛrɛnnenw ye.

• Yeelen-ci-sɛgɛsɛgɛli walima opacity sɛgɛsɛgɛli yɔrɔ minnu na a ka kan.

• Funteni-sigi daminɛ funteni.

• Sigi fanga ani hot-tack baarakɛcogo.

• Sigili-sɛgɛsɛgɛli min bɛ kɛ ni nɔgɔ ye.

• Burst, drop, compression ani leak sɛgɛsɛgɛli.

• Valve, zipper ani accessoires dafalen sɛgɛsɛgɛli.

• Kɔnɔnafili sɛgɛsɛgɛli yɔrɔ minnu na a bɛ se ka kɛ.

• A marali ni a marali waati dantigɛli.

• Pake, palɛti ani minɛnw doni sɛgɛsɛgɛli.

Kunnafoni minnu ka kan ka kɛ PET /AL/PE Film Quote kama

• Fɛn min bɛ kɛ pake kɔnɔ ani a girinya jɛlen.

• Dumuni, furakɛli walima izini baarakɛcogo.

• A maracogo wajibiyalenw ani a maracogo.

• Fali funteni ni sigili funteni.

• Tobili, pastɛri walima retort kɛcogo o fɛɛrɛ.

• OTR, WVTR ani yeelen-bɔri laɲini wajibiyalenw.

• A ka fisa PET , papiye ni PE layɛrɛ janya.

• A ka kan ka kɛ a bɛɛ lajɛlen janya ni a muɲuni ye.

• Filimu bonya ni a bonya muɲuni.

• Foroko cogoya ani bɔrɔ dafalen hakɛw.

• Packaging-machine dilannikɛla ani a modɛli.

• Masina teliya ani sigilan-jaw cogoya.

• Core diameter ani roll diameter maksimali.

• Rollo girinya hakɛ maksimali.

• Printing artwork ani kulɛri jate.

• Aw bɛ segin janya, ɲɛ taamasiɲɛ ani a jiginni sira kan.

• Valve, zipper, spout walima tear-notch wajibiyalen don.

• Destination market ani sariya labatoli sɛbɛnw wajibiyalenw.

• Koman fɔlɔ hakɛ ani san o san jateminɛ.

• Packing, destination port ani delivery don ɲininen.

Aw ye aw ka Lamination Film wajibiyalenw ci

Sɛbɛnw ni jogoɲumanya sɛbɛnw

Sɛbɛn minnu bɛ sɔrɔ, olu bɛ se ka kɛ fɛɛrɛko kunnafonidilanw ye, lakana kunnafoniw sɛbɛnw, dumuniko kunnafoniw, jiginni kunnafoniw, fɛnw dantigɛlenw kunnafoniw, fura tolenw kunnafoniw ani jogoɲumanya seereyaw.

Sɛbɛn kelen-kelen bɛɛ ka kan ka bɛn PET /AL/PE jɔcogo laban ma, sɛbɛnnikɛlan, nɔrɔlan, PE sigilan, a dilayɔrɔ ani baarakɛcogo laɲininenw.

Sosiyete ka seere caman man kan ka jate i n’a fɔ dalilu min b’a jira ko OTR kɛrɛnkɛrɛnnen dɔ, WVTR, retort rating, dumuni ni ɲɔgɔn cɛ cogoya walima pakew marali waati.

HSQY Duniya Ɲɛjiraliw

HSQY bɛ pakew filimuw jira minnu bɛ se ka wuli ka bɔ u nɔ na, ​​filimu minnu bɛ kɛ ka fɛnw datugu, dumunikɛminɛnw, plastiki sɛbɛnw ani pakew dilanni fɛɛrɛw minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, diɲɛ jiralibaw la.

Sɛnɛfɛnw dilanni ni u forokoni

Packing ani Delivery

Misaliw foroko : Kuru misɛnninw ni filimu misaliw bɛ se ka pake lakanani bɔrɔw kɔnɔ, kartɔnw kɔnɔ walima kɛsu gɛlɛnw kɔnɔ.

Bulk roll packing: Rolls bɛ se ka siri ni PE film lakananen ye, kraft papier, fɛn min tɛ ji bɔ walima pake kɛcogo wɛrɛ min bɛnna a kan.

Core ni roll protection: Paper cores, roll ends ani film edges bɛ se ka lakana ka kɛɲɛ ni roll girinya ni a cicogo wajibiyalenw ye.

Palɛti pake : Kilo 500-2000 ɲɔgɔn bɛ se ka pake plywood walima palɛti min tɛ sisi bɔ, ka kɛɲɛ ni rollo hakɛ ni a minɛcogo dan ye.

Minɛn doni : Doni hakɛ min bɛ tali kɛ a la, o bɛ se tɔni 20 ma, ka kɛɲɛ ni rollo ɲɛfɔli ye, palɛti dilanni ani sariya kɔnɔ minɛn girinya dantigɛli.

A marali : Aw bɛ filimu mara so kɔnɔ yɔrɔ saniyalenw na, yɔrɔ min jalen don, yɔrɔ min ka jan tile yeelen tilennen na, funteni kojugu, ji, buguri ani kasa gɛlɛnw.

Lasecogo: EXW, FOB, CNF, CIF, DDU ani Incoterms wɛrɛw minnu bɛnna bɛnkan kan, olu bɛ se ka baro kɛ.

Waati min bɛ kɛ : A ka c’a la, baarakɛcogo jɔnjɔn bɛ baarakɛdon 10-14 ɲɔgɔn de wajibiya, jɔli, sɛbɛnni, seko ni dɔnko, hakɛ ani sarali dafalen kɔfɛ.

Mun na i bɛ HSQY sugandi ka kɛ i ka PET /AL/PE filimu dilanbaga ye?

• PET , aliminiyɔmu papiye ani PE barikalanba jɔcogo.

• Layɛrɛw janya minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye ani filimu janya bɛɛ lajɛlen.

• Rollo stock min sɛbɛnnen don ani min ma sɛbɛn.

• Custom reverse printing ani nɛgɛ dilancogo nɔw.

• Filimu bonya, a kɔnɔna, a roll diamètre ani a winding direction min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• Kafe, dumuni mugu, sokɔnɔbaganw ka dumuni ani izini pakew jɔcogo.

• Misaliw ni kɔrɔbɔli sɛbɛnfura minnu bɛ kɛ ka masinw ni sigicogo sɛgɛsɛgɛliw kɛ.

• Barrière, bond, imprimerie ani seal-test dɛmɛni.

• Pouch custom ani pakew cogoyaw minnu bɛ se ka wuli ka bɔ u nɔ na.

• Export packing ani diɲɛ B2B lase dɛmɛni.

Sani u ka caman dilan, HSQY b’a ɲini ka laminati sugandilen kɔrɔbɔ ni kiliyan ka fɛn dilannen yɛrɛ ye, ni pakew dilanni masin ye, ni sigicogo ye, ni a maracogo ye ani ni pake dafalenw cogoya ye.

Aw ye HSQY lajɛ walasa ka misaliw ni sɔngɔko dɔn

Ɲininkali minnu bɛ kɛ tuma caman na PET /AL/PE Film kan

PET /AL/PE lamini filimu ye mun ye?

O ye pake caman ye min bɛ se ka wuli ka bɔ a nɔ na, ​​min bɛ kɛ ni PET kɛnɛma-yɔrɔ ye, aliminiyɔmu papiye barikalan ani PE funteni-datugulan.

PET /AL/PE layɛrɛ kelen-kelen bɛɛ bɛ mun kɛ?

PET bɛ fanga ni sɛbɛnni kɛ, aliminiyɔmu bɛ oksizɛni, ji ani yeelen balilanba di, ani PE bɛ fɛn caman sɛgɛsɛgɛ ani ka funteni datugu.

Yala PET /AL/PE filimu bɛ kɛnɛya wa?

Ayi, aliminiyɔmu papiye lakika tɛ ye, o la, lamini min ma sɛbɛn, a ka c’a la, a bɛ kɛ i n’a fɔ warijɛ nɛgɛ.

Fɛn jumɛnw bɛ se ka pake PET /AL/PE filimu kɔnɔ?

A kɛcogo minnu ka teli ka kɛ, olu ye kafe, te, dumuni misɛnninw, nɔnɔmuguw, dumuni jalenw, tulumafɛnw, balomuguw, sokɔnɔbaganw ka dumuniw, furaw ani izini fɛnw ye minnu bɛ ji sɔrɔ.

Yala PET /AL/PE bɛnnen don kafe foroko ma wa?

Awɔ. A bɛ yeelen, oksizɛni ani ji lakanani di. Kafe kuuru tobilen kura fana bɛ se ka kɛ ni gazi bɔlan ye min bɛ taa sira kelen fɛ.

Yala PET /AL/PE bɛ oksizɛni barika dafalen di wa?

Aluminiyɔmu papiye bɛ oksizɛni barika barikamaba di, nka pake dafalen baarakɛcogo yɛrɛ bɛ bɔ pake pinɛw la, flex cracking, seals, valves, zippers ani pake tiɲɛni na.

OTR ni WVTR ye mun ye?

OTR bɛ oksizɛni tali suman, ka sɔrɔ WVTR bɛ ji-lafiɲɛbɔ suman. Nafa fila bɛɛ ka kan ka sɛgɛsɛgɛli kɛcogo, funteni, nɛnɛ ani lamini jɔcogo jira.

Mun na aluminiyɔmu papiye laminiw bɛ se ka bɔnɛ barika baara la?

Pinɛw tiɲɛni, foli segin-segin, flex cracking, delamination, puncture ani pakew sigicogo jugu bɛ se ka dɔ bɔ barika baarakɛcogo ɲuman na.

Danfara jumɛn bɛ PET /AL/PE ni PET /VM PET /PE cɛ?

PET /AL/PE bɛ baara kɛ ni aliminiyɔmu papiye lakika ye ani a ka c’a la, a bɛ yeelen, oksizɛni ani ji barika barikama di. PET /VM PET /PE bɛ baara kɛ ni nɛgɛdaga finman ye ani a ka c’a la, a ka nɔgɔn ani a musaka ka dɔgɔ.

Yala PET /AL/PE bɛnnen don retort sterilize ma wa?

Standard PET /AL/PE man kan ka kɛ a yɛrɛma ka kɛ retort ye. A ka c’a la, retort foroko bɛ CPP walima RCPP sigilan kɛrɛnkɛrɛnnen ni retort-grade nɔrɔlan de wajibiya.

Yala PET /AL/PE filimu bɛ se ka tobi wa?

Tobili kɛli bɛ kɛ ni fɛn kɛrɛnkɛrɛnnen ye min dilannen don, nɔrɔlan ani sirilan. Filimu standard man kan ka jate ko a bɛ se ka tobi ni a ma sɛgɛsɛgɛ.

Yala PET /AL/PE filimu bɛ se ka kɛ mikro la wa?

Aluminiyɔmu papiye bɛ laminati min na, o man kan ka bila mikro kɔnɔ fo ni a pakew dilanni sira dafalen ni a feerelaw ka laadilikanw dabɔra kɛrɛnkɛrɛnnenya la o baara kama.

Yala PET /AL/PE filimu bɛ se ka sɛbɛn ka kɛɲɛ ni mɔgɔw sago ye wa?

Awɔ. Logow, fɛn dilannenw kunnafoniw, barɔdiw, cikanw ani ja masirilenw bɛ se ka sɛbɛn kɔfɛ PET layɛrɛ kan.

Yala aliminiyɔmu cogoya yɔrɔ dɔ bɛ se ka to ka ye wa?

Awɔ. Seko ni dɔnko baara bɛ se ka baara kɛ ni yɔrɔ finmanw ye minnu sɛbɛnnen don, yɔrɔ kulɛrilenw ani yɔrɔ minnu ma sɛbɛn nɛgɛ-fɛɛrɛw la ka kɛɲɛ ni dilancogo ye min dagalen don.

Bonya jumɛnw bɛ sɔrɔ?

A bɔlen bɛ milimɛtɛrɛ 160 fo milimɛtɛrɛ 2600 ɲɔgɔn na, nka sɔrɔli laban bɛ bɔ lamini jɔcogo la, sɛbɛnni, papiye janya ani fɛn caman tigɛli minɛnw na.

Fɛnɲɛnɛma jumɛnw bɛ sɔrɔ?

A janya bɛɛ lajɛlen bɔlen bɛ 0,045mm fo 0,35mm ɲɔgɔn na. Layɛrɛ kelen-kelen bɛɛ ka kan ka sugandi ka kɛɲɛ ni fɛn dilannen ni a foroko wajibiyalenw ye.

Yala a kɔnɔna ni a jiginni sira bɛ se ka kɛ ka kɛɲɛ ni i yɛrɛ sago ye wa?

Awɔ. Core diameter, roll diameter, roll weight, printed-side orientation ani winding direction bɛ se ka bɛn pakew dilanni masin ma.

Yala PET /AL/PE filimu dumuni ye farati ye wa?

Dumuni ni ɲɔgɔn cɛ bɛnnen bɛ bɔ PET , papiye, nɛgɛ, tintiri ani PE jɔcogo dafalen na ani dumuni, funteni, kuntaala ani taayɔrɔ suguya laɲininen na.

Yala SGS ka seereyaw b’a jira ko PET /AL/PE filimu bɛɛ ye dumuni hakɛ ye wa?

Ayi SGS ka rapɔɔri nafa ka bon dɔrɔn ni a bɛ lamini tigitigi, sariya minnu bɛ sirataama ani baarakɛcogo laɲinitaw ɲɛfɔ.

Yala PET /AL/PE filimu bɛ se ka segin ka kɛ fɛn wɛrɛ ye wa?

O ye laminati ye min bɛ kɛ ni fɛn caman ye, min faralen don ɲɔgɔn kan ka gɛlɛn fɛnw lasegincogo kɔrɔlenw na. Seginkanni lakika bɛ bɔ sigida ka fɛnsɔrɔko kɛrɛnkɛrɛnnenw de la.

Yala fɛɛrɛ wɛrɛw bɛ sɔrɔ minnu bɛ se ka segin ka kɛ fɛn wɛrɛw ye wa?

Mono-PE, mono-PP, barrier coté transparent ani metallized-film structures bɛ se ka jateminɛ ni u bɛnnen don fɛɛrɛko siratigɛ la.

Yala PET /AL/PE bɛ se ka kɛ furakɛli foroko kɔnɔ wa?

Ɔwɔ, ka baara kɛ ni furakɛli-dafalen sigicogo ye ani barika bɛnnen, jiginni, saniya, sabatili ani sariyaw tiɲɛni.

Yala misaliw walima kɔrɔbɔli sɛbɛnw bɛ sɔrɔ wa?

Sɛgɛsɛgɛli walima kɔrɔbɔli sɛbɛnfura minnu bɛ yen, olu bɛ se ka sɔrɔ walasa ka u jɔcogo lajɛ, ka sɛbɛnni kɛ, ka u datugu, ka sɛbɛnfura nɔfɛtaama ani ka pakew ni u foroko-masin bɛnkan sɛgɛsɛgɛ.

Kunnafoni jumɛnw de ka kan ka kɛ walasa ka quotation sɔrɔ?

Aw bɛ fɛn dilannen pake kɔnɔ, a maracogo, filimu jɔcogo, a layini janya, a bonya, a sɛbɛnni, a bɔrɔ cogoya, a masin kunnafoni, a kɔnɔna, a sirili, a hakɛ ani a taayɔrɔ di.

Aw ye PET /AL/PE Film Quote sɔrɔ

HSQY Plastic Group ko la

HSQY Plastic Group bɛ PET /AL/PE lamination film, nɛgɛ lamination films, kulɛri sɛbɛnnenw composite films, lidding films, dumuni sanubɔlanw ani customized flexible packaging materials di diɲɛ B2B kuntigiw ma.

HSQY bɛ dɛmɛ don dumuni dilannikɛlaw ma, kafe suguyaw, sokɔnɔbaganw ka dumuni dilannikɛlaw, furakɛlitɔnw, pakew tigɛbagaw minnu bɛ se ka wuli ka bɔ u nɔ na, ​​fɛnw donbagaw ni u feerelaw ni sigida yiriwali, sɛbɛnni, misaliw, jogoɲini sɛgɛsɛgɛli ani fɛnw pakew bɔli jamana wɛrɛw la.

Quote ni Sample ɲini