HSQY 7.48*6.1 Inches PET Jiridenw kɛsu Rectangle Disposable Clear PET Plastique Sache

7,48 × 6,1 Inch jɛlen PET jiridenw kɛsu

HSQY bɛ PET jiriden kɛsu jɛlenw dilan minnu bɛ kɛ kɛnɛ kan, minnu bɛ kɛ ka kɛ shɔ, bulu, rezɛn, seri, tomati seri, nakɔfɛn kuraw ani feerefɛn wɛrɛw ye.

Fɛn dilannenw sigiyɔrɔma in kɔnɔ, sennasanbaraw bɛ 190 × 155mm ni 195 × 159mm ɲɔgɔn na ni u juguya tɛ kelen ye, u ka yɔrɔw labɛncogo, u dadoncogo ani u fiɲɛbɔcogo suganditaw.

7,48 × 6,1 inch fɛn dilannen tɔgɔ bɛ bɛn 190 × 155mm senna-taama ma. Sisan HSQY fɛn HS-001-40 bɛ jate danfara la ko 195 × 159 × 43mm. Sannikɛlaw ka kan ka mɔbili nimɔrɔ tigitigi ni kɛnɛma hakɛw dafa sani u ka komandi kɛ.

PET jɛlen bɛ fɛn dilannenw yecogo ɲuman di ani ka gɛlɛya nafama di suguba jirali ma, foro pakew, sɛnɛfɛnw tilatilali, nɛnɛ cakɛda minɛcogo ani jamana kɔkan pakew.

Dilancogo minnu bɛ sɔrɔ, olu bɛ se ka kɛ jɛgɛw ye minnu bɛ kɛ ni fɛn kelen ye, sanubɔlanw ni u datugulanw tɛ kelen ye, sanubɔlanw da wulilenw, jiridenw kɛsu tilalenw ani pakew minnu dilannen don ni funteni ye.

Fɛnɲɛnɛma dingɛw, sisi kɛlɛli sugandiliw, taamasiyɛn yɔrɔw, fɛnw minnu bɛ se ka fɛn caman sɛgɛsɛgɛ, PET kɔnɔfɛnw minnu bɛ segin ka kɛ fɛn wɛrɛw ye ani taamasiyɛnw kɛcogo minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu bɛ sɔrɔ dɔrɔn yɔrɔ minnu na u bɛ sɔrɔ mɔbili sugandilen kɔnɔ ani fɛnsɛbɛnni min dabɔra.

Sɛgɛsɛgɛli kɛ ka fara o kan PET clamshell minɛnw ni dafalen HSQY PET dumunikɛminɛnw hakɛ.

PET jiridenw kɛsu sɔngɔ ɲini    Misaliw ni Jaw ɲini

PET jiridenw kɛsu ja jɛlenw

PET jiridenw kɛsu ɲɛfɔli jɛlenw

Sisan, ɲɛ in bɛ 190 × 155mm ani 195 × 159mm fɛn dilannenw senna-tɛgɛrɛw bɛɛ lajɛlen jira. Sanniko ɲɛfɔli laban ka kan ka fɛn nimɔrɔ tigitigi, mɔbili ja ani kɛnɛma hakɛw jira.

PET jiridenw kɛsu jɛlen ye mun ye?

PET jiriden kɛsu jɛlen ye plastiki minɛn ye min dilannen don ni funteni ye, min bɛ kɛ ka jiridenw ni nakɔfɛn kuraw minɛ, k’u lakana, k’u ta ani k’u jira.

PET bɛ kɛnɛya di min b’a to feerekɛlaw ni feerekɛlaw bɛ se ka jiridenw kulɛri, u mɔcogo, u bonya ani u cogoya sɛgɛsɛgɛ k’a sɔrɔ u ma foroko da wuli.

Kɔkiliw, nkɔni, kogow ani datugulan jɔcogo minnu dilannen don, olu bɛ dɛmɛ ka fɛn nɔgɔlenw lakana ka bɔ degun tilennen na, ka tiɲɛni ni nɔgɔ minɛ.

Jiridenw kɛsu bɛ se ka dilan ni fiɲɛbɔyɔrɔw ye walasa ka fiɲɛbɔli dɛmɛ foro nɛnɛ waati, nɛnɛ mara waati ani u ta waati.

Foroko tɛ sɛnɛfɛnw mara a yɛrɛma. Fɛn dilannenw funteni, u kocogo, u nɛnɛ, u ninakili hakɛ, u nɛnɛ waati ani u ka nɛnɛ cakɛda kɔlɔsili bɛ to ka kɛ fɛnba ye.

PET Jiridenw Box, Punnet, Tray ani Clamshell danfara

Fiɲɛbɔcogo sugandilenw ka ɲɛsin fɛn kuraw foroko ma

Fiɲɛ bilali dawolo la

Datugulan fiɲɛbɔyɔrɔw bɛ fiɲɛ sumalen ni nɔgɔlen bila ka taa sanfɛ ani ka bɔ foroko kɔnɔ.

Fiɲɛ bilali kɛrɛfɛ

Kɛrɛfɛla fiɲɛbɔyɔrɔw bɛ fiɲɛbɔyɔrɔw dɛmɛ ni minɛnw bilala ɲɔgɔn kɛrɛfɛ kartɔnw kɔnɔ walima feerekɛyɔrɔw kɔnɔ.

Base Ventilation (Fiɲɛbɔcogo basigilen).

Basi fiɲɛbɔyɔrɔw bɛ se ka fiɲɛbɔ jɔlenw dɛmɛ ani ka ji bɔli danma kɛ, nka a bɛ se ka kɛ u tɛ bɛn yɔrɔ minnu na, jibɔ kɔlɔsili ka kan ka kɛ yɔrɔ minnu na.

Rim ani Closure Vents

Yɔrɔ minnu bɛ da tugu walima da tuguyɔrɔ lamini na, olu bɛ se ka fiɲɛ bila ka sɔrɔ ka dɛmɛ don ka datugulan kunba ni a basigilen jɔcogo fanga sabati.

Dilan minnu tɛ fiɲɛ bila u la

Box minnu tɛ fiɲɛ bila, olu bɛ se ka sugandi fɛn jalenw kama, jiriden labɛnnenw, fɛn minnu mago bɛ ji bɔli la walima pakew dilanni fɛɛrɛ minnu bɛ baara kɛ ni nɛnɛ kɔlɔsili fɛɛrɛ danfaralen ye.

Fiɲɛbɔyɔrɔ ɲuman bɛ bɔ sɛnɛfɛnw ninakili la, u kocogo, u nɛnɛcogo ɲɛfɛ, nɛnɛ cakɛda funteni, nɛnɛ hakɛ, kartɔn fiɲɛbɔli ani u ta waati.

Jiridenw kɛsu sugandi cogo min na sɛnɛfɛn suguya wɛrɛw kama

PET sɛnɛfɛnw foroko jɛlenw ka fɛn kolomaw

Fɛn dilannenw yecogo ka bon

PET jɛlen bɛ a to sannikɛlaw bɛ se ka jiridenw kulɛri, u bonya, u mɔcogo ani u cogoya bɛɛ lajɛ k’a sɔrɔ u ma foroko da wuli.

Structure rigide min bɛ mɔgɔ tanga

Kogow, kɔkiliw ani nkɔni minnu dilannen don, olu bɛ dɛmɛ ka sɛnɛfɛnw tanga u minɛcogo tilennen ma ani ka dɔ bɔ pakew bɔgɔbɔli la.

Dadoncogo lakananenw

Snap locks, perimeter closures ani tamper-evident options bɛ se ka dɛmɛ ka pake datugulen to a minɛcogo, a tacogo ani a feereli waati.

Fiɲɛbɔcogo suganditaw

Fiɲɛbɔcogo minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu bɛ se ka fiɲɛbɔ, foro nɛnɛ ani jisuma marali dɛmɛ sɛnɛfɛn sugandilenw na.

Design min bɛ se ka wuli ka bɔ ɲɔgɔn na

Rim moulded, lid profiles ani base features bɛ se ka dɛmɛ don ka minɛnw sabati kartɔnw kɔnɔ ani feerekɛyɔrɔw jiralanw kɔnɔ.

Foroko min ka nɔgɔn

PET min dilannen don ni funteni ye, o bɛ pake fanga nafama di ka sɔrɔ ka minɛn girinya ni a tacogo hakɛ to a kɔrɔsilen don.

Dadon, Stacking ani Transport baarakɛcogo

Jiridenw kɛsu ka kan ka to da la fasa waati, kartɔn pakeli waati, palɛti minɛcogo, nɛnɛ marayɔrɔ ani feerekɛyɔrɔ jirali waati.

Dadoncogo ka kan ka lajɛ da wulilen kɔfɛ siɲɛ caman, funteni dɔgɔyalen kɔfɛ ani bolifɛnw yɛrɛyɛrɛli lakika.

Minɛnw kɔnɔna ka kan ka kɛ sababu ye ka kunkolo yɔrɔ caman di walasa ka jiriden nɔgɔlenw digidigi da la.

Basi ni a datugulan ka kan ka dɛmɛ don stacking sabatilen na ka sɔrɔ a ma doni tɛmɛnen bila sɛnɛfɛnw kan k’a ɲɛsin sɛnɛfɛnw ma.

Sannikɛlaw ka kan ka pake laban kɔrɔbɔ kartɔn kurulen yɛrɛ kɔnɔ ni u dalajɛcogo laɲininen ye ani palɛti janya.

Manuel ani Automatique Produit Packing

PET jiridenw kɛsu bɛ se ka kɛ bololabaarakɛlaw ka foro-pake tabali la, suguba labɛnni yɔrɔw la ani sɛnɛfɛnw pake siraw la minnu bɛ kɛ otomatiki la.

Otomatiki siratigɛw bɛ denso janya basigilen de wajibiya, denso bɔli dafalen, flansɛ hakɛ kɔrɔsilen ani dadon baarakɛcogo segin-segin.

A foroko ka kan ka sɛgɛsɛgɛ ni kiliyan ka denester, conveyor, pese system, label applicator, closure unit ani carton-packing fɛɛrɛ ye.

Static, nesting pressure ani dimensional variation bɛ se ka nɔ bila ni kɛsu kelen-kelen bɛɛ bɛ fara ɲɔgɔn kan ka ɲɛ.

Anti-Fog ani Condensation Kɔlɔsili

Kɔnɔnatumu bɛ se ka dɔ bɔ fɛn dilannenw yecogo la ani ka feereli kɛcogo dɔ dilan min tɛ mɔgɔ ɲɛnajɛ ni fɛn sumalenw bilala yɔrɔ nɛnɛman na.

Fiɲɛbɔyɔrɔw bɛ se ka dɛmɛ don ka fiɲɛbɔcogo ɲɛnabɔ, nka u tɛ jisuma bɔ pakew ni u maracogo bɛɛ la.

Sisi kɛlɛli fini walima sisi kɛlɛ PET furakɛcogo bɛ se ka jateminɛ yɔrɔ minnu na yecogo jɛlen ka kan ka kɛ nɛnɛ na jirali waati.

Bugun kɛlɛli baarakɛcogo ka kan ka sɛgɛsɛgɛ ni sɛnɛfɛn lakikaw ye, ni kocogo, pake funteni, a maracogo nɛnɛ ani a jiracogo.

PET, rPET, PP ani PLA jiridenw foroko

Dumuni-ɲɔgɔn-ɲini ani sariyaw ka wajibiw

PET minɛn min dabɔra ka maga jiridenw na tigitigi, o ka kan ka baara kɛ ni furakɛlicogo ni a dilanni fɛɛrɛ ye min bɛnnen don a taayɔrɔ suguya ma ani baarakɛcogo laɲininenw ma.

Sannikɛlaw ka kan ka taa jamana min na, dumuni suguya, a sɔrɔ waati, a marali funteni ani ni jiriden kuuru don, ni a kolen don, ni a tigɛra walima ni a dilannen don.

Dumunifɛnw ni ɲɔgɔn cɛ sɛbɛnw bɛ se ka ɲɛsin resin, kulɛriw, faralifɛnw, fɛn minnu bɛ segin ka kɛ fɛn wɛrɛw ye ani jiginni wajibiyalenw minnu bɛ sirataama.

SGS ye sɛgɛsɛgɛli, sɛgɛsɛgɛli ani seereyaw jɛkulu ye. SGS ka fɔta o ɲinini ka kan ka kunnafoni lakika, fɛn sɛgɛsɛgɛlen, sɛgɛsɛgɛli kɛcogo ani a jaabi jira.

ISO 9001 ye jogoɲumanya-sɛnɛcogo sariya ye, wa a t’a jira a yɛrɛma ko jiriden kɛsu kɛrɛnkɛrɛnnen dɔ bɛ dumuni ni ɲɔgɔn cɛ sariyaw labato.

A bɛ kɛ nɛnɛ na, a bɛ kɛ nɛnɛ na ani a bɛ kɛ ni funteni caman ye

PET jiriden kɛsu jɔnjɔnw dabɔra fɔlɔ sɛnɛfɛnw foroko kɔnɔ minnu bɛ lamini ani minnu bɛ friji kɔnɔ.

Fɛnɲɛnɛma kɛcogo ka kan ka jateminɛ ni fɛn dilannen funteni yɛrɛ ye, ni a ka jisuma hakɛ, a ka kartɔn dilanni ani a ta waati.

Konfirɛzi bɛnnen ka kan ka dafa barisa funteni dɔgɔyali bɛ se ka nɔ bilali baarakɛcogo Changer ani ka dɔ fara farati kan ka kari a minɛtuma na.

PET jiriden kɛsu minnu bɛ kɛ ka kɛɲɛ ni sariya ye, olu man kan ka kɛ mikrowɛn kɔnɔ, foro kɔrɔw la walima ka u fa funteni na fo ni fɛn kɛrɛnkɛrɛnnen dɔ ni a foroko dɔ sɛgɛsɛgɛra o baara kama.

PET jiridenw kɛsu lasegincogo jateminɛw

PET bɛ dɔn ni resin kode nimɔrɔ 1 ye, wa a bɛ se ka segin ka kɛ fɛn wɛrɛ ye fɛɛrɛko siratigɛ la.

PET jiriden kɛsu ni thermoformed clamshells sɔnni tiɲɛ na, o bɛ danfara ka kɛɲɛ ni dugu, jamana ani fɛnw lasegin yɔrɔ ye.

Paper sɛbɛnniw, nɔrɔlanw, fɛn min bɛ fɛnw minɛ, dumuni tolenw ani fɛn ɲagaminenw bɛ se ka nɔ bila fɛnw tilacogo ni u lasegincogo la.

O la, pakew ka kan ka fɔ ko u bɛ se ka segin ka kɛ fɛn wɛrɛw ye yɔrɔ minnu na, fɛnw lajɛyɔrɔw ni PET thermoform lasegincogo bɛnnenw bɛ yen sanni u ka se ka segin u cogo kɔrɔ la sugu bɛɛ kɔnɔ.

PET jiridenw foroko sugandicogo minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye

• Moulu rectangulaire 190 × 155mm ani 195 × 159mm minnu bɛ yen.

• A janya, a bonya, a juguman ani a kɔnɔna hakɛ min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• Kelen, fila, naani ani ladamu yɔrɔw labɛncogo.

• Clamshell charnière, datugulan danfaralenw ni da wulilenw jɔcogo.

• Datugulan, kɛrɛfɛla, rimi ani basigi fiɲɛbɔ.

• Dingɛ lamininenw, dakunw ani fiɲɛbɔyɔrɔw cogoyaw minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• Snap locks ani perimeter datugulanw.

• Tamper-evident label walima dadon sugandiliw.

• Anti-fog material walima coating suganditaw.

• Labeli yɔrɔw fla walima minnu bɛ don a kɔnɔ.

• Logo embossed ani traceability taamasiyɛnw.

• PET npogotiginin ani rPET/PCR sugandili minnu dabɔra.

• Minɛn girinya ni kogo janya min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• Bololabaara ni otomatiki packing-line designs.

• Kartɔn hakɛ min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, palɛti misali ani jamana kɔkan taamasiyɛnw.

Sɛgɛsɛgɛli minnu bɛ kɛ ka ɲɛsin jogoɲumanya kɔlɔsili ma

• PET resin ani recycled-content sɛgɛsɛgɛli.

• Kɛnɛma ni kɔnɔna hakɛw.

• Janya bɛɛ lajɛlen, a basigilen juguya ani a dawolo janya.

• Minɛnw girinya ni kogo-kɛnɛya tilatilali.

• Transparence, haze, color ani black-spot sɛgɛsɛgɛli.

• Dadon fanga ani dadon sɛgɛsɛgɛli segin-segin.

• Charnière flexibilité ani crack resistance.

• Vent-hole nimɔrɔ, a jɔyɔrɔ ani a bonya.

• Konteyna sigili ni densting baarakɛcogo.

• Stacking sabatili ani compression sɛgɛsɛgɛli.

• Kartɔn fitinin ani palɛti-stack jateminɛ.

• Transport vibration ani drop sɛgɛsɛgɛli.

• Refrigerated impact baarakɛcogo.

• Congelador jateminɛni yɔrɔ minnu na a mago bɛ a la.

• Anti-fog ani condensation sɛgɛsɛgɛli yɔrɔ minnu ɲɛfɔlen don.

• Label adhesion ani otomatiki labeling sɛgɛsɛgɛliw.

• Dumuni-ɲɔgɔnna ni mɔgɔw ka bɔnɔgɔla sɛbɛnw lajɛ.

• Case hakɛ, carton hakɛ ani shipping-label sɛgɛsɛgɛli.

Kunnafoni minnu ka kan ka kɛ PET jiridenw kɛsu Quote la

• Jiriden walima nakɔfɛn suguya.

• Fɛn kuuru, kolenw, tigɛlenw walima fɛn dilannenw.

• Net fill girinya walima a hakɛ wajibiyalen.

• Jiridenw janya ni u cɛmancɛ hakɛ cayalenba.

• Kɛnɛma hakɛ minnu wajibiyalen don.

• Kɔnɔna baarakɛcogo wajibiyalenw hakɛw.

• Kɔlɔn kelen, sanubɔlan min datugulen don walima sanubɔlan da wulilen.

• Dakun hakɛ wajibiyalen.

• Fiɲɛ bɛ don a la walima fiɲɛbɔ tɛ min na.

• Fɛnɲɛnɛma-dingɛ hakɛ, a hakɛ ani a jɔyɔrɔ.

• Dadonni ni fɛn minnu bɛ se ka fɛn caman sɛgɛsɛgɛ.

• Anti-fog wajibiyalen don.

• PET npogotiginin walima rPET/PCR wajibiyalen don.

• Laɲini minɛn girinya ni a gɛlɛya.

• Bololabaara walima otomatiki pake kɛcogo.

• Labeli hakɛw ni labeli kɛminɛnw.

• Nɛnɛ-marayɔrɔ ni taa-ni-segin funteni.

• Kartɔn hakɛw ani kɛsu hakɛ min ka fisa.

• Palɛti janya ani bolifɛnw ta sira.

• Destination market ani dumuniko sɛbɛnw wajibiyalenw.

• Jateminɛ fɔlɔ ani san hakɛ jateminɛlen.

Aw ye aw ka PET jiridenw kɛsu wajibiyalenw ci

Packing ani Delivery

Misaliw pake: Nɔgɔbɔlan minnu bɛ yen, olu bɛ se ka kɛ bɔrɔw kɔnɔ minnu bɛ u tanga walima kartɔnw kɔnɔ walasa ka dɔ bɔ u muguli la ciden ci waati.

Sisan ko kɛlenw pake: HS-001-40 jatebɔsɛbɛn bɛ 300 jira ko kelen kelen bɛɛ la.

Fɛn minnu bɛ kɛ ka caya: Minɛnw bɛ don u kɔnɔ ka u bila dumunifɛnw foroko foroko kɔnɔ ani jagokɛyɔrɔw ka kartɔnw kɔnɔ minnu bɛ kɛ ni jiriw ye.

Denso kɔlɔsili : Denso janya ni a degun ka kan ka kɔlɔsi walasa ka kartɔn hakɛ dɔgɔya k’a sɔrɔ denso bɔli gɛlɛya ma kɛ.

Kartɔn lakanani : Kartɔn fanga ka kan ka sugandi ka kɛɲɛ ni kɛsu hakɛ ye, a dalajɛ janya, a sira ani a nɛnɛ cogoya.

Palɛti pakew : Kartɔnw bɛ se ka siri jamana kɔkan palɛtiw kan ni filimu ye min bɛ se ka wuli, ni sirilanw ye ani ni nkɔni lakanani ye.

Minɛnw doni : Doni hakɛ bɛ bɔ kartɔn hakɛw ni pakew sigicogo la sanni ka bɔ fɛn dilannen girinya dɔrɔn na.

Waati min bɛ kɛ: A ka c’a la, komandi minnu bɛ kɛ ni mɔli ye, olu bɛ tile 7-15 ɲɔgɔn ta, u ɲɛfɔcogo, u misali ani u sarali dafalen kɔfɛ.

Lasecogo sariyaw: EXW, FOB, CNF, DDU ani jagokɛcogo wɛrɛw bɛnna minnu kan, olu bɛ sɔrɔ.

Seereyaw ni Tekniki sɛbɛnw

Sɛbɛn minnu bɛ sɔrɔ, olu bɛ se ka kɛ fɛn dilannenw ɲɛfɔcogo ye, dumuni ni ɲɔgɔn cɛ jiracogo, jiginni-sɛgɛsɛgɛli kunnafoniw, fɛnw dantigɛlenw kunnafoniw ani jogoɲumanya seereyaw.

Sɛbɛn bɛɛ ka kan ka lajɛ ni PET hakɛ tigitigi ye, a kɔnɔfɛnw kɛmɛsarada la, a kulɛri, a minɛn modɛli, a dilanyɔrɔ ani a taayɔrɔ sugu.

SGS ka kunnafoniw ka kan ka ɲɛfɔ ka kɛɲɛ ni sɛgɛsɛgɛli lakikaw ye minnu dafara sanni u ka jira iko dumuniko lakanani walima sabatili seereyaw diɲɛ bɛɛ kɔnɔ.

ISO jogoɲini seere o seere suguya, seere tigi, a bonya ani a tiɲɛni ka kan ka dafa sani a ka bɔ kɛnɛ kan.

Mun na aw bɛ HSQY sugandi ka kɛ aw ka PET jiridenw kɛsu feerela ye?

• PET jiridenw kɛsu mɔli rectangulaire minnu bɛ yen.

• Foroko jɛlenw jiridenw ni nakɔfɛnw feereyɔrɔw jirali kama.

• Dugukolo caman ani yɔrɔ suganditaw.

• Ja minnu bɛ kɛ ni charnière ye, minnu bɛ datugu ani minnu bɛ da wuli.

• Fiɲɛbɔcogo minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• Labeli yɔrɔw ani taamasiyɛn suganditaw.

• Virgin PET ani application kɛrɛnkɛrɛnnen rPET sugandiliw.

• Misaliw minnu bɛ kɛ ka fɛn dilannenw ni u tacogo sɛgɛsɛgɛli kɛ.

• Existing-mold ani custom-tooling dɛmɛni.

• Bololabaara ni otomatiki packing-line jateminɛ.

• Kartɔn, palɛti ani export-packaging customization.

• Dumuni-sɔrɔ-sɛbɛnw dɛmɛni ka kɛɲɛ ni taayɔrɔ sugu ye.

Sani jiriden caman ka sɛnɛ, HSQY b’a ɲini ka jiriden yɛrɛ sɛgɛsɛgɛ sɛnɛfɛnw tacogo misali kɔnɔ ani ka dadon, fiɲɛbɔ, dalajɛ, kartɔn ani nɛnɛ cakɛda kɔrɔbɔliw dafa.

Aw ye HSQY lajɛ walasa ka misaliw ni sɔngɔko dɔn

Ɲininkali minnu bɛ kɛ tuma caman na PET jiridenw kɛsu jɛlenw kan

PET jiriden kɛsu jɛlen ye mun ye?

O ye PET minɛn jɛlen ye min dilannen don ni funteni ye, min bɛ kɛ ka jiridenw ni nakɔfɛn kuraw lakana, ka taa ni u ye ani k’u jira.

Nin jiriden kɛsu in bonya tigitigi ye mun ye?

Ɲɛ tɔgɔ bɛ 190 × 155mm ɲɔgɔn jira, k’a sɔrɔ sisan HS-001-40 ka fɛn dilannenw paramɛtiri bɛ 195 × 159 × 43mm jira. Moule ja tigitigi ka kan ka dafa sani i ka komandi kɛ.

Dakun joli bɛ sɔrɔ yen?

Dakun kelen, fila ani naani dilancogo bɛ se ka sɔrɔ. A sɔrɔli laban bɛ bɔ mɔli sugandilen na.

Yala nin fura in ye sɔgɔsɔgɔninjɛ ye wa walima sanubɔlan da wulilen?

HSQY bɛ jɛgɛw dilan minnu bɛ se ka siri, sanubɔlanw minnu datugulen don ni u ye ani sanubɔlanw da wulilenw. Aw ye sigicogo wajibiyalen ni fɛn nimɔrɔ dafa quotation kɔnɔ.

Yala fiɲɛbɔyɔrɔw bɛ jiridenw kɛsu kɔnɔ wa?

Fiɲɛ bilali bɛ bɔ nɔgɔ la. Datugulan, kɛrɛfɛla, basigi, rimi ani fiɲɛbɔbali suganditaw bɛ se ka jateminɛ.

Mun na jiriden minɛnw mago bɛ fiɲɛ bilali la?

Fiɲɛ bilali bɛ se ka fiɲɛbɔli dɛmɛ, ka kɔn ka nɛnɛ ani ka jisuma mara. Fiɲɛbɔyɔrɔ ɲuman bɛ bɔ sɛnɛfɛnw ni nɛnɛ-cakɛda kɛcogo la.

Yala PET jiriden kɛsu bɛ sisi kɛlɛ wa?

PET standard tɛ a yɛrɛma anti-fog ye. Sugandili kɛlɛli fɛɛrɛ bɛ se ka jateminɛ ani ka kɔrɔbɔ ka kɛɲɛ ni a maracogo laɲininenw ye.

Yala o kɛsu bɛnnen don jirisunw ma wa?

A bɛ se ka kɛ a bɛnnen don ni a jugumanba, fiɲɛbɔyɔrɔ dilanni, a fa girinya ani a datugulan bɔli bɛ bɛn shɔ hakɛ ni a pake kɛcogo ma.

Yala a bɛ se ka kɛ rezɛn na wa?

Ɔwɔ, ni kɛsu kɔnɔna juguya ni kunkolo yɔrɔ bɛrɛ bɛ rɛzɛn kuluw ni a jiriw la.

Yala a bɛ se ka kɛ buluw ye wa?

Fɛnɲɛnɛmafagalan bɛnnen bɛ se ka kɛ buluw la. Fiɲɛbɔyɔrɔw ka kan ka kɛ fitinin ye walasa berew kana bɔ.

Yala a bɛ se ka kɛ tomati seri ye wa?

Awɔ. Tomati cɛmancɛ, a foroko kɔnɔna, fiɲɛbɔ ani a datugulan tansiyɔn ka kan ka lajɛ ni fɛn dilannenw tacogo lakikaw ye.

Yala jiridenw kɛsu bɛ se ka kɛ ka kɛɲɛ ni mɔgɔw sago ye wa?

A bonya, a juguya, a yɔrɔw, a fiɲɛbɔyɔrɔw, a dakunw, a taamasiyɛnw yɔrɔw, a fɛnw girinya ani a ka kartɔnw pakew bɛ se ka kɛ ka kɛɲɛ ni baarakɛminɛnw ni MOQ ye.

Yala HSQY bɛ se ka fɛn dɔ labɛn min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye wa?

Laada mɔbili yiriwali bɛ se ka jateminɛ ja, fɛn dilannenw misali, laɲini falen girinya, komandi hakɛ ani pakew wajibiyalenw dafalen kɔfɛ.

Yala logo embossed dɔ bɛ se ka fara a kan wa?

Logo min sɛbɛnnen don, taamasiyɛn min bɛ kɛ ka fɛnw lasegin u cogo kɔrɔ la, dingɛ nimɔrɔ walima traceability code bɛ se ka fara a kan ni mɔbili ye min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

Yala labeliw bɛ se ka kɛ u yɛrɛma wa?

Awɔ. Label yɔrɔ, a kurulen ani a foroko ɲɛsincogo ka kan ka bɛn kiliyan ka labeli kɛbaga otomatiki ma.

Yala pake minnu bɛ se ka fɛn dɔw sɛgɛsɛgɛ, olu bɛ sɔrɔ wa?

Label minnu bɛ se ka fɛn tiɲɛ, ɲɛjibɔlanw ani dakun minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu bɛ se ka jateminɛ ka kɛɲɛ ni mɔli sugandilen ye.

Yala PET jiriden kɛsu dumuni farati tɛ wa?

Dumuni ni ɲɔgɔn cɛ bɛnnen ka kan ka dafa PET hakɛ tigitigi la, faralifɛnw, fɛn minnu bɛ segin ka kɛ fɛn wɛrɛw ye, taayɔrɔ suguya ani baarakɛcogo cogoyaw.

Yala SGS ka kunnafoni dɔ b’a jira ko dumuni ni ɲɔgɔn cɛ sariya labatoli bɛ kɛ wa?

Ni kunnafoni in bɛ dumuniko sɛgɛsɛgɛliw ɲɛfɔ minnu bɛ tali kɛ o ko la, fɛn tigitigiw ani sugu laɲinitaw dɔrɔn. SGS yɛrɛ tɛ dumuniko lakanani sariya ye min bɛ diɲɛ bɛɛ kɔnɔ.

Yala PET tɛ BPA sɔrɔ wa?

A ka c’a la, BPA tɛ kɛ fɛn ye min bɛ kɛ ka fɛnw jɔ PET resin kɔnɔ. Fɛn dantigɛlenw ko kɛrɛnkɛrɛnnen o kɛrɛnkɛrɛnnen ka kan ka dɛmɛ hali bi ni feerekɛlaw ka sɛbɛnw walima sɛgɛsɛgɛli ye minnu bɛ sirataama.

Yala PET min bɛ segin ka kɛ fɛn wɛrɛ ye, o bɛ se ka kɛ wa?

Dumuniko rPET walima PCR PET bɛ se ka jateminɛ ka kɛɲɛ ni kɛmɛsarada la segin-ka-bɔnye wajibiyalen ye, ka jɛya ani ka suguya sɛbɛnw.

Yala jiriden kɛsu bɛ se ka kɛ fɛn wɛrɛ ye wa?

PET bɛ se ka segin ka kɛ fɛn wɛrɛ ye fɛɛrɛko siratigɛ la, nka sigidamɔgɔw ka sɔnni na PET jiriden kɛsu minnu dilannen don ni funteni ye, o bɛ danfara ka kɛɲɛ ni fɛnw seginni porogaramu ye.

Yala PET minɛn bɛ se ka bila mikro la wa?

PET jiriden kɛsu minnu bɛ kɛ ka kɛɲɛ ni sariya ye, olu man kan ka kɛ mikro la.

Yala a bɛ se ka kɛ foro kɔnɔ wa?

Ayi, APET jiriden foroko minnu bɛ kɛ ka kɛɲɛ ni sariya ye, olu ma dabɔ foro kɔnɔ baara kɛcogo kɔrɔ la.

Yala a bɛ se ka kɛ konfirɛzi kɔnɔ wa?

Congelador bɛnnenya ka kan ka sɛgɛsɛgɛ ka kɛɲɛ ni PET hakɛ tigitigi ye, a funteni, a kuntaala ani a nɔfɛkow.

Yala jiridenw kɛsu bɛ se ka kɛ ɲɔgɔn kan wa?

Jiridenw-kɛsu mɔli fanba bɛ ni fɛnw ye minnu bɛ ɲɔgɔn dalajɛ, nka kartɔn laban ni palɛti cogoya ka kan ka kɔrɔbɔ ni jiridenw doni yɛrɛ ye.

Yala o kɛsu ninnu bɛ se ka baara kɛ ni otomatiki pakew ye wa?

Modeli minnu bɛ yen, olu bɛ se ka bɛn denso, denso, conveyor, closure ani label-application kɔrɔbɔliw bannen kɔfɛ.

Ko hakɛ ye mun ye?

HS-001-40 ɲɛ min bɛ sen na sisan, o bɛ unit 300 jira ko kelen-kelen bɛɛ la. Modeli wɛrɛw bɛ se ka baara kɛ ni kartɔn hakɛ wɛrɛw ye.

Koman hakɛ fitinin ye mun ye?

Sisan MOQ sariyasun bɛ se 30.000 ma. Ka kɛɲɛ ni mɔgɔw sago ye, fɛn minnu bɛ kɛ ka fɛnw lasegin u cogo kɔrɔ la ani fɛn kɛrɛnkɛrɛnnenw minnu bɛ kɛ ka fɛnw kɛ, olu bɛ se ka hakɛ wɛrɛ de wajibiya.

Yala misaliw bɛ sɔrɔ wa?

Nɔgɔbɔlan minnu bɛ yen, olu bɛ se ka sɔrɔ walasa ka jiridenw bɛncogo lajɛ, u datugucogo, u fiɲɛbɔcogo, u jɛyacogo, u dalajɛcogo ani u ka kartɔnw ka bɛn ɲɔgɔn ma.

A dilanni ɲɛminɛ waati ye mun ye?

A ka c’a la, komandi minnu bɛ kɛ ni mɔli ye, olu bɛ tile 7-15 ɲɔgɔn de wajibiya, u ɲɛfɔcogo, u misali ani u sarali dafalen kɔfɛ.

Kunnafoni jumɛnw de ka kan ka kɛ walasa ka quotation sɔrɔ?

Aw bɛ sɛnɛfɛnw suguya, laɲini fa girinya, u bonya, u juguya, u jɔcogo, u yɔrɔw, fiɲɛbɔyɔrɔ, fɛnw, hakɛ, kartɔn wajibiyalenw ani taayɔrɔ suguya di.

Aw ye Custom PET Fruit Box Quote sɔrɔ

HSQY Plastic Group ko la

HSQY Plastic Group bɛ PET jiridenw kɛsu jɛlenw di, ka jɛgɛw dilan, sogo ni nakɔfɛnw sarɛtiw, burufefeerelaw ka minɛnw, salati minɛnw ani dumunifɛnw foroko plastiki minnu dilannen don ka kɛɲɛ ni mɔgɔw sago ye diɲɛ B2B kuntigiw ma.

HSQY bɛ forow, sɛnɛfɛnw pakew, suguba feerelaw, dumuni dilannikɛlaw, pakew tilabaga ani feerekɛlaw dɛmɛ ni mɔbili sugandili ye min bɛ yen, ka baarakɛminɛnw kɛ ka kɛɲɛ ni mɔgɔw sago ye, ni misaliw ye, ka jogo sɛgɛsɛgɛ ani ka pakew bila ka taa jamana wɛrɛw la.

Quote ni Sample ɲini