PVC Soft Film Don Rufin ...

Fim ɗin PVC mai sassauƙa don Murfin Kayan Aiki da Binder

HSQY tana ƙera fim ɗin PVC mai sassauƙa da ɗan tsauri don murfin kayan rubutu, maƙallan zobe, manyan fayiloli na takardu, masu kare shafi, murfin littattafai, murfin menu, hannun riga na katin shaida, masu riƙe da bajoji, akwatunan fensir da sauran kayayyakin kayan rubutu da aka canza.

Fim ɗin PVC da aka nuna yana samuwa a cikin kauri daga kimanin 0.05mm zuwa 0.30mm. Bayanan kayan rubutu da aka saba amfani da su sun haɗa da 0.10mm, 0.12mm, 0.15mm, 0.18mm, 0.20mm, 0.25mm da 0.30mm.

Akwai fina-finai masu launin shuɗi, masu haske, masu haske, masu haske da kuma waɗanda ba a iya gani. Zaɓuɓɓukan saman sun haɗa da sheƙi, matte, frosted, orange bawon, fata, suede da kuma embossing na musamman.

Yawanci ana bayar da maki masu sassauƙa a cikin manyan biredi ko biredi masu yankewa don walda, dinki, bugawa da juyawa. Hakanan ana iya samar da maki masu tsauri kamar A4, A3, A5, Harafi, Littattafai na Shari'a da kuma zanen yanke na musamman.

Ana iya daidaita laushi da aikin sarrafawa ta hanyar tsarin PVC, tsarin plasticizer, kauri da tsarin embossing. Abokan ciniki ya kamata su ƙayyade taurin bakin teku, sassauci, saman, tsarin haɗawa da aikace-aikacen da aka gama.

Zaɓuɓɓukan da aka zaɓa sun haɗa da kariya daga kwafi, ba tare da phthalate ba, anti-static, anti-blocking, low-zafi, RF-weldable, printable, antimicrobial, inflammatory-coolant da UV-stabilized PVC film.

Waɗannan halaye na zaɓi ba a haɗa su a cikin kowane fim na yau da kullun ba. Dole ne a tabbatar da ainihin tsari, hanyar gwaji da takaddun tallafi kafin a samar da su da yawa.

Nemi Farashin Fim ɗin PVC    Nemi Samfuran Fim

Hotunan Fim Mai Laushi na PVC Masu Inganci

Menene Fim ɗin Takardar PVC Mai Sauƙi?

Fim ɗin kayan rubutu na PVC mai sassauƙa abu ne da aka yi da polyvinyl chloride mai filastik wanda aka ƙera don ya ci gaba da lanƙwasa kuma ya dace da yankewa, bugawa, yin embossing, naɗewa, walda, hatimin zafi, dinki da haɗin manne.

Ba kamar zanen ɗaure PVC mai tauri ba, PVC mai sassauƙa tana ɗauke da tsarin plasticizer wanda ke shafar laushi, labule, sassaucin yanayin zafi mai ƙarancin zafi, ƙaura, aikin rufewa da tsufa na dogon lokaci.

Ana zaɓar fim mai haske lokacin da takardu, zane-zanen da aka buga ko katunan shaida dole ne su kasance a bayyane. Ana amfani da fina-finai masu launi da aka yi wa ado don kayan ado na waje, manyan fayiloli, murfin littafin rubutu, jakunkuna da kayan rubutu masu alama.

Ana iya kwatanta kayan a matsayin fim mai laushi na PVC, fim mai laushi na vinyl, fim ɗin PVC na rubutu, vinyl mai murfin binder, fim ɗin PVC mai haske ko takardar PVC mai filastik.

PVC mai sassauƙa idan aka kwatanta da PVC mai sassauƙa da mai sassauƙa

Kauri kaɗai ba ya tantance ko PVC mai sassauƙa ce ko kuma mai tauri. Tsarin, matakin plasticizer, tauri, zafin jiki da tsarin saman suma suna shafar sarrafawa.

Bayanin Fim ɗin Taushi na PVC

Jagorar Kauri Mai Sauƙi na Fim ɗin PVC

Micron ɗaya daidai yake da 0.001mm. Saboda haka, fim ɗin PVC mai girman micron 200 yana da kauri 0.20mm.

Zaɓin laushi, tauri da kuma na'urar plasticizer

Fina-finai biyu masu kauri iri ɗaya na iya samun sassauci daban-daban domin laushin ya dogara ne akan resin PVC, nau'in plasticizer, matakin plasticizer, abubuwan cikawa, pigments, zafin jiki da kuma embossing.

Abokan ciniki ya kamata su samar da manufa ta taurin kai ta Shore, samfurin jiki da aka amince da shi ko kuma takamaiman buƙatun samfurin da aka gama.

Fim ɗin PVC mai aminci don Takardu da aka Buga

PVC mai filastik na yau da kullun na iya hulɗa da toner, tawada, shafi da kayan da ke da saurin matsi yayin hulɗa na dogon lokaci.

An ƙera fim ɗin PVC mai aminci da kwafi don rage haɗarin canja wurin rubutu ko zane-zane daga takarda zuwa saman PVC.

Wannan kadara tana da mahimmanci ga masu kare shafi, aljihunan ɗaurewa, hannun riga na takardu, murfin menu da samfuran da ke ci gaba da taɓawa da takarda da aka buga na tsawon lokaci.

Ya kamata a gwada jituwa da ainihin toner na laser, tawada ta inkjet, tawada mai kama da tawada, takarda mai rufi, zafin ajiya da kuma lokacin da ake tsammanin haɗawa.

Zaɓuɓɓukan Launi da Kammalawa

Siffofin Fim ɗin Takardar PVC Mai Sauƙi

• Sassauci Mai Daidaitawa: Za a iya keɓance laushi da tauri bisa ga samfurin da aka gama.

• Ganuwa a sarari: Maki masu haske suna ba da damar takardu, lakabi da katunan su ci gaba da bayyana.

• Akwai saman abubuwa da yawa: Za a iya samun gamawa masu sheƙi, matte, frosted da embossed.

• Sauƙin canzawa: Ya dace da yankewa, naushi, naɗewa, walda, hatimi da dinki.

• Zaɓuɓɓukan bugawa: Zaɓuɓɓukan musamman na iya tallafawa allo, gravure, UV da bugu na dijital.

• Juriyar Danshi: Fim ɗin yana hana ruwa shiga yadda ya kamata kuma yana taimakawa wajen kare takardu daga hasken rana.

• Keɓancewa da Launi: Ana iya daidaita launuka masu haske, masu haske da marasa haske.

• Maki na aiki: Zaɓuɓɓukan kariya daga kwafi, marasa phthalate, anti-static da anti-blocking suna samuwa.

Aikace-aikace na PVC Soft Film

• Murfin ɗaure zobe: Fim ɗin waje mai sassauƙa ko rabin tauri don ɗaure zobe da yawa.

• Aljihunan ɗaurewa: Aljihunan da aka haɗa da liƙa masu kyau don lakabi, katuna da takardu.

• Kariyar shafi: Hannun riga masu kariya ga kwafi don rahotanni da bayanai da aka buga.

• Hannun Takardu: Hannun da aka haɗa da aka yi da welded masu haske don fayiloli da takaddun shaida.

• Murfin littattafai da na rubutu: Jaket masu laushi masu kariya da kuma fatar waje mai ado.

• Fayiloli: Fayilolin gabatarwa, walat ɗin takardu da aljihunan masu shiryawa.

• Murfin menu: Murfin da aka goge a goge, mai launi ko kuma mai kauri.

• Masu riƙe da bajoji: Aljihuna don katunan shaida da takardun shaidar taron.

• Akwatunan fensir: Abubuwan PVC da aka buga, masu launi kuma masu haske.

• Masu shirya takardu: Kayayyakin ajiya masu walda da yawa.

• Kayan talla na talla: Murfu, manyan fayiloli da jakunkuna na musamman da aka buga.

Walda ta RF, Hatimin Zafi da Dinki

Ana amfani da PVC mai sassauƙa don walda ta hanyar rediyo ko kuma walda mai yawan mita wajen samar da aljihunan takardu, masu riƙe da tambari, hannayen riga, manyan fayiloli, jakunkuna da akwatunan fensir.

Aikin walda ya dogara da tsari, kauri, launi, embossing, siffar electrode, ƙarfin injin, matsin lamba, lokacin zama da lokacin sanyaya.

Bugawa akan Fim ɗin PVC Mai Sauƙi

Ana iya buga fim ɗin PVC mai sassauƙa don abubuwan ɗaurewa masu alama, manyan fayiloli, akwatunan fensir, murfin littafin rubutu, masu riƙe takardu da kayan talla.

Dole ne tawada ta kasance mai lanƙwasa bayan naɗewa da walda. Ya kamata a gwada samfuran da aka buga don mannewa, gogewa, toshewa, ƙaura, juriyar tsaftacewa da tsagewa.

Jagororin Yankewa, Hudawa da Canzawa

• Yi amfani da slatters masu kaifi, guillotines, wukake, naushi da kuma drills na ƙarfe.

• Sarrafa tashin hankali a yanar gizo don rage mikewa, wrinkles da motsi a gefen.

• Bari fim ɗin ya yi kyau kafin a yanke shi daidai bayan manyan canje-canje a yanayin zafi.

• Tabbatar da an cire naushi da nisan gefen daidai da kauri da laushi.

• A guji zafi mai yawa wanda zai iya ragewa, ya ɓata ko kuma ya yi laushi a fim ɗin.

• Gwada fina-finan da aka buga da waɗanda aka yi wa ado daban-daban domin samansu yana shafar ciyarwa da walda.

• Ba a ba da shawarar yanke da sassaka na laser na yau da kullun ga PVC ba.

Maki na Kayan Aiki na Yara da na Non-Phthalate

PVC mai sassauƙa yana buƙatar tsarin plasticizer, kuma plasticizer da aka zaɓa yana shafar sassauci, ƙaura, tsufa da bin ƙa'idodi.

Ana iya ƙirƙirar magungunan da ba na phthalate ba ga abokan ciniki waɗanda ke buƙatar takamaiman ƙa'idodi na ƙayyadadden abu ko buƙatun dillalai.

Masu siye ya kamata su samar da kasuwar da za a je, rukunin shekaru da aka tsara, amfanin da aka gama da kuma cike jerin abubuwan da aka takaita.

Gwaje-gwajen na iya haɗawa da takamaiman phthalates, gubar, cadmium, ƙarfe mai nauyi, abubuwan REACH, buƙatun CPSIA ko ƙaura ta EN 71-3 bisa ga ƙayyadaddun bayanin abokin ciniki.

Aikace-aikacen Kula da Lafiya da Abinci

Bai kamata a yi amfani da fim ɗin PVC mai laushi na kayan rubutu ta atomatik don marufi na likita ko hulɗa kai tsaye da abinci ba.

PVC mai matakin likita na iya buƙatar resin da aka ƙayyade, mai hana filastik, mai daidaita yanayi, matakin tsafta, bayanin jituwar halittu, dacewa da tsaftacewa da kuma bin diddigin tsari.

Dacewar hulɗa da abinci ya dogara ne da cikakken tsari, launuka, ƙari, tawada, nau'in abinci, zafin jiki, lokacin hulɗa da kuma buƙatun kasuwar da za a je.

Maki na cikin gida, mai dorewa ta UV da kuma mai hana harshen wuta

Fim ɗin rubutu na PVC mai sassauƙa an tsara shi ne musamman don aikace-aikacen cikin gida.

Hasken rana na dogon lokaci da kuma fallasa shi ga zafi na iya taimakawa wajen yin rawaya, faɗuwa, bushewa, ƙaura daga filastik, canjin girma da toshe saman.

Aikace-aikacen waje suna buƙatar takamaiman matakin UV da aka tsara da kuma gwaje-gwajen yanayi da aka bayyana a sarari.

Ana iya haɓaka ma'aunin hana harshen wuta lokacin da aka ƙayyade ma'aunin da ake buƙata, kauri, launi, yanayin samfurin da rarrabuwa.

Bai kamata a bayyana sakamakon ƙona kayan ta atomatik a matsayin rarraba wuta ta cikakken manne, kayan daki ko tsarin gini ba.

Gwaje-gwajen Kula da Inganci da Aka Ba da Shawara

• Resin PVC, mai plasticizer, mai daidaita launi da kuma tabbatar da launi.

• Juriyar kauri da kauri.

• Faɗin birgima, tsawon birgima, nauyin birgima da diamita na tsakiya.

• Tashin hankali, na'urar hangen nesa, daidaita gefen da toshewa.

• Girman takardar, murabba'i da ingancin gefen da aka yi amfani da shi.

• Taurin bakin teku da daidaiton laushi.

• Yawan da aka yi bisa ga tsarin da aka amince da shi.

• Bayyanar da haske, hazo, tint da sheƙi.

• Bambancin launi da tsari-zuwa-tsari.

• Tsarin saman da kuma daidaiton embossing.

• Baƙaƙen tabo, gels, ramuka, kumfa, ƙaiƙayi da gurɓatawa.

• Ƙarfin tauri, tsayin daka da ƙarfin tsagewa.

• Sanyi-crack da ƙarancin zafin jiki.

• Canjin girma da raguwar nauyi bayan fallasa zafi.

• Tsarin hana fim zuwa fim da kuma fitar da shi.

• Shigewa da Plasticizer da kuma dacewa da hulɗa.

• Mai aminci ga kwafi da kuma juriya ga canja wurin toner.

• Buga mannewa, abrasion da juriya mai lanƙwasa.

• Ƙarfin walda na RF, ƙarfin rufewar zafi da kuma bayyanar gani.

• Yagewar allura da ƙarfin dinki don kayayyakin da aka dinka.

• Juriyar saman don matakan anti-static.

• Gwajin abubuwa masu iyaka don aikace-aikacen da aka tsara.

• Gwajin ƙonewa ko maganin ƙwayoyin cuta don takamaiman maki.

• Duba kaya, fakiti da kuma duba kwantena.

Zaɓuɓɓukan Fim ɗin PVC Mai Sauƙi Na Musamman

• Kauri daga 0.05mm zuwa 0.30mm.

• Nau'in birgima, na'urorin yanke birgima, zanen gado mai faɗi da kuma guntu-guntu da aka yanka.

• Faɗin birgima har zuwa kusan 1280mm.

• A5, A4, A3, Harafi, Girman shari'a da na musamman.

• Tsarin da ke da sassauƙa da kuma ɗan tsauri.

• Musamman taurin bakin teku da hannu.

• Fim ɗin mai launi mai haske, mai haske, mai launin kore, mai launin kore.

• Mai sheƙi, matte, mai sanyi, mai launin lemu, fata da kuma saman fata mai launin fata.

• Ma'aunin da ba shi da lahani ga kwafi kuma mai jure wa canja wurin toner.

• Magungunan da ba sa ɗauke da sinadarin phthalate da waɗanda aka takaita amfani da su wajen sarrafa su.

• Ana iya walda RF, ana iya rufewa da zafi, ana iya bugawa da kuma dinki.

• Anti-static, anti-toshewa da ƙananan zafin jiki.

• Ana gwada maganin kashe ƙwayoyin cuta da kuma maganin kashe harshen wuta.

• Lakabi na musamman, kwalaye, pallets da alamun jigilar kaya.

Bayanan da ake buƙata don ƙimar fim ɗin PVC

• Kauri da haƙuri da ake buƙata.

• Faɗin birgima da ake buƙata, tsawon birgima da matsakaicin nauyin birgima.

• Ana buƙatar diamita na core-paper.

• Tsarin samar da kayan aiki na birgima, takarda ko yankewa.

• A4, A3, Harafi, Girman doka ko na musamman.

• Bukatar sarrafawa mai sassauƙa ko mara tsauri.

• Taurin bakin teku ko samfurin tunani da aka amince da shi.

• Bukatar filastik na yau da kullun ko wanda ba na phthalate ba.

• Launi mai haske, mai launin shuɗi, mai haske ko kuma mara haske.

• Fuskar mai sheƙi, matte, mai sanyi ko kuma mai embossed.

• Bukatar kwafi mai aminci, anti-static ko anti-toshewa.

• Tsarin walda ta RF, rufe zafi, dinki ko haɗa manne.

• Hanyar bugawa, tawada da tsarin warkarwa.

• Amfani da shi a cikin gida, a waje, a kan yara, a fannin likitanci ko a kan abinci.

• Gwaje-gwajen da aka ƙayyade da kuma gwaje-gwajen aiki.

• Adadin odar farko da kuma ƙimar buƙata ta shekara-shekara.

• Shiryawa, tashar jiragen ruwa da kuma ranar isarwa da ake buƙata.

Aika Bukatun Fim ɗin PVC ɗinku

Takardun Bayanan PVC Masu Alaƙa da Rahoton Gwaji

Shafin asali ya ƙunshi takardu da dama na bayanai na PVC da rahotannin gwaji. Duk hanyoyin haɗin takardu na asali an ajiye su a ƙasa.

Wasu takardu sun shafi takardar PVC mai tauri, allon toka ko takardar bugawa ta offset maimakon fim ɗin rubutu mai sassauƙa. Tabbatar da tsari, mai hana filastik, kauri, launi, wurin samarwa da samfurin gwaji kafin amfani da rahoto.

   Takardar Bayanan Takardar PVC Mai Tsabta

   Flammability na PVC Tauri Sheet

   Rahoton Gwajin Allon Laushi na PVC

   Takardar Bayanan Fim ta PVC Bayyana

   Rahoton Gwajin Takardar PVC

   Rahoton Gwajin Allon Toka Mai 20mm

   Rahoton Gwajin Buga Takardar PVC don Biyan Kuɗi

Shiryawa da Isarwa

Samfurin tattarawa: Za a iya saka zanen A4 da ƙananan samfuran fim a cikin jakunkunan PP ko PE kuma a kare su da kwalayen jigilar kaya.

Kunshin nadi: Ana iya ɗaure nadi a kan takarda, a naɗe shi da fim ɗin PE sannan a kare shi da takarda kraft ko kwali na fitarwa.

Shirya takardar: Ana iya ƙirga zanen gado da aka yanke a cikin jakunkuna, kwali ko fakitin kimanin 30kg bisa ga kauri da buƙatun abokin ciniki.

Shirya fale-falen: Ana iya ɗaure birgima da kwali a kan plywood ko fale-falen fitarwa marasa feshi tare da kariyar gefe, madauri da fim ɗin shimfiɗawa.

Nauyin pallet na tunani: Kimanin kilogiram 500-2000 dangane da girman birgima, kwali da iyakokin sarrafawa.

Lodawa a cikin kwantena: Adadin lodawa da aka yi amfani da shi ya kai kimanin tan 20, ya danganta da girman birgima, tsarin pallet da kuma iyakokin nauyin doka.

Ajiya: A adana fim ɗin a cikin gida a cikin yanayi mai tsabta, sanyi da bushewa, nesa da hasken rana kai tsaye, hanyoyin zafi da matsin lamba mai yawa.

Lokacin samar da kayayyaki: Umarni na yau da kullun yawanci suna buƙatar kimanin kwanaki 7-15 bayan an tabbatar da tsari, ƙayyadaddun bayanai, samfurin, marufi da biyan kuɗi.

Takaddun Shaida da Takardun Bin Dokoki

Takardun da ake da su na iya haɗawa da takaddun bayanai na fasaha, takaddun bayanai na aminci, rahotannin abubuwan da aka takaita, rahotannin na'urar yin amfani da filastik, rahotannin kadarorin zahiri da takaddun shaida na gudanar da inganci.

Ya kamata a bayyana SGS bisa ga ainihin gwajin da aka yi kuma bai kamata a gabatar da shi azaman takardar shaidar samfuri ta duniya ba.

RoHS ba ta tabbatar da bin ƙa'idodin hulɗa da abinci, magani, kayan yara ko kayan rubutu gabaɗaya ba.

ISO 9001 yana da alaƙa da tsarin kula da inganci na masana'anta kuma baya tabbatar da aikin fasaha ko ƙa'ida na fim ɗin PVC kai tsaye.

Ya kamata a tabbatar da mai takardar shaidar, wurin samarwa, bugu na yau da kullun, iyakokin takaddun shaida da lokacin inganci kafin a buga su.

Nunin Duniya na HSQY

Me Yasa Za Ka Zabi HSQY A Matsayin Mai Kaya Fim ɗin PVC Mai Sauƙi?

• Fim ɗin PVC mai sassauƙa kuma mai ɗan tauri don samar da kayan rubutu.

• Kauri daga 0.05mm zuwa 0.30mm.

• Nau'in na'urori masu girma, na'urorin yankewa, zanen gado da kuma kayan da aka yanke.

• Kayayyaki masu launi masu haske, masu launin shuɗi, masu haske da kuma launuka marasa haske.

• Zaɓuɓɓukan saman masu sheƙi, matte, mai sanyi da kuma embossed.

• Musamman taurin bakin teku da sassauci.

• Tsarin da ba shi da illa ga kwafi da kuma wanda ba shi da illa ga phthalate.

• Ana iya walda RF, ana iya rufewa da zafi, ana iya bugawa da kuma dinki.

• Samfura don walda, bugawa, ƙaura da gwajin samfuran da aka gama.

• Duba inganci bisa ga ƙa'idodin da aka amince da su.

• Na musamman marufi da tallafin isar da kaya na ƙasashen waje.

Kafin a samar da kayayyaki da yawa, HSQY ya ba da shawarar a gwada fim ɗin da aka zaɓa da ainihin bugawar abokin ciniki, yankewa, walda, dinki, mannewa da kayan da aka gama.

Tuntuɓi HSQY don Samfura da Farashi

Tambayoyin da Ake Yawan Yi Game da Fim ɗin Rubutun PVC Mai Sauƙi

Menene fim ɗin PVC mai sassauƙa?

Fim ɗin PVC ne mai filastik wanda aka ƙera don ya kasance mai sassauƙa kuma ya dace da murfin ɗaurewa, hannun riga na takardu, manyan fayiloli, jakunkuna da sauran kayayyakin rubutu.

Shin fim ɗin PVC mai laushi iri ɗaya ne da murfin ɗaure PVC mai ƙarfi?

A'a. PVC mai laushi yana ɗauke da na'urar plasticizer kuma yana lanƙwasa cikin sauƙi. Murfin ɗaurewa mai tauri na PVC sun fi tauri kuma yawanci ana amfani da su azaman rahoton lebur ko murfin gabatarwa.

Wadanne kauri ake samu?

Girman da aka nuna mai sassauƙa da kuma ɗan tauri shine kusan 0.05mm zuwa 0.30mm.

Shin microns 200 daidai yake da 0.20mm?

Eh. Fim ɗin da kaurinsa ya kai microns 200 yana da kauri 0.20mm.

Wane kauri ya dace da hannun riga na takardu?

Ana ɗaukar kimanin 0.10-0.18mm a matsayin mafi sauƙi ga hannun riga na takardu, dangane da dorewar da ake buƙata da kuma tsarin walda.

Wane kauri ya dace da murfin ɗaure?

Ana amfani da PVC mai tsayin kusan 0.20-0.30mm don amfani da murfin kayan aiki masu ɗorewa da kuma murfin kayan aiki masu ɗorewa.

Za a iya daidaita laushin?

Eh. Ana iya daidaita laushi ta hanyar amfani da dabarar kuma a tabbatar da ita ta amfani da taurin Shore ko samfurin jiki da aka amince da shi.

Menene ma'anar PVC mai aminci ga kwafi?

An ƙera PVC mai aminci da kwafi don rage haɗarin canja wurin toner ko tawada daga takardu da aka buga zuwa saman fim ɗin.

Shin duk wani fim ɗin PVC mai haske yana da aminci?

A'a. Aikin kwafi yana buƙatar tsari mai dacewa da gwajin daidaito tare da ainihin yanayin toner, tawada, takarda da ajiya.

Shin akwai fim ɗin PVC mara phthalate?

Eh. Ana iya kimanta tsarin plasticizer marasa phthalate bisa ga kasuwar da ake zuwa, aikace-aikacen da kuma buƙatun abubuwan da aka ƙayyade.

Shin fim ɗin ya dace da kayan rubutu na yara?

Ana iya samar da wani tsari na musamman idan aka ƙayyade shekarun mutum, kasuwar da za a je da kuma gwaje-gwajen phthalate, gubar, ƙarfe mai nauyi ko amincin kayan wasa.

Za a iya haɗa fim ɗin PVC da RF?

Eh. Ana haɗa PVC mai sassauƙa ta hanyar RF ko walda mai yawan mita bayan an tabbatar da tsarin, kauri da saitunan injin.

Za a iya rufe fim ɗin PVC da zafi?

Za a iya haɗa ma'aunin da aka zaɓa da zafi, amma dole ne a gwada zafin jiki, matsin lamba, lokacin zama, ƙarfin hatimi da raguwar aiki.

Za a iya dinka fim ɗin PVC mai sassauƙa?

Eh. Ana iya dinka PVC mai sassauƙa don murfin littafin rubutu, akwatunan fensir da masu shiryawa ta amfani da allurai, zare da tazara mai dacewa.

Za a iya buga fim ɗin PVC?

Ana iya buga allo, a buga gravure, a buga UV ko a buga ta hanyar dijital bayan tawada, a gwada warkarwa da mannewa.

Akwai saman da aka yi wa ado da fenti?

Eh. Ana iya samar da bawon lemu, hatsin fata, fata, matte da kuma zane-zanen da aka yi da aka yi da kayan ado na musamman.

Za a iya samar da launuka na musamman?

Eh. Ana iya daidaita launuka masu haske, masu haske da marasa haske bisa ga samfurin zahiri ko kuma bayanin launi da aka amince da shi.

Shin akwai fim ɗin PVC mai hana tsatsa?

Ana iya haɓaka matakin anti-static bisa ga kewayon juriya na saman da ake buƙata, ƙarfin gwaji, danshi da tsawon lokaci mai tasiri.

Menene fim ɗin PVC mai hana toshewa?

An ƙera fim ɗin hana toshewa don rage mannewa tsakanin layukan da ke kusa yayin naɗewa, adanawa da juyawa.

Shin fim ɗin PVC mai laushi yana hana ruwa shiga?

Fim ɗin yana hana ruwa shiga ta hanyar da ta dace, amma cikakken kayan rubutu ba ya hana ruwa shiga ta atomatik saboda ɗinki, buɗewa da dinki na iya ba da damar shiga ruwa.

Shin fim ɗin PVC na yau da kullun ya dace a waje?

Fim ɗin rubutu na yau da kullun an yi shi ne don amfani a cikin gida. Aika shi zuwa waje na dogon lokaci yana buƙatar takamaiman matakin UV wanda aka gwada.

Shin fim ɗin yana hana harshen wuta?

Bai kamata a ɗauka cewa harshen wuta yana aiki ba. Ana buƙatar tsari mai hana harshen wuta da rahoton gwaji don tabbatar da kauri, launi da daidaito.

Za a iya amfani da fim ɗin PVC mai sassauƙa don marufi na likita?

Ya kamata a yi la'akari da tsarin likitanci mai dacewa kawai bayan an tabbatar da buƙatun plasticizer, biocompatibility, tsafta, tsaftacewa da ƙa'idodi.

Za a iya yanke fim ɗin PVC mai laushi ta hanyar laser?

Ba a ba da shawarar yankewa da sassaka na laser na yau da kullun ba saboda PVC na iya samar da iskar gas ko ƙura mai haɗari. Ana ba da shawarar yankewa da yankewa na inji.

Shin mai plasticizer zai iya ƙaura daga PVC mai sassauƙa?

Canjin filastik na iya faruwa dangane da tsari, zafin jiki, kayan da aka haɗa da lokacin ajiya. Ana ba da shawarar gwajin jituwa.

Menene mafi ƙarancin adadin oda?

Matsakaicin MOQ na misali shine kimanin 1000kg. Ana iya tattauna kimanin 500kg don zaɓaɓɓun takamaiman bayanai da ake da su.

Ana samun samfuran?

Ana iya samun samfuran A4 da ake da su, samfurin fim da kuma samfuran naɗi masu iyaka. Yawanci abokin ciniki ne ke biyan kuɗin jigilar kaya ta ƙasashen waje.

Wane bayani ake buƙata don yin ƙiyasin farashi?

Samar da kauri, faɗi, tsawon birgima, tauri, buƙatar plasticizer, launi, saman, tsarin juyawa, adadin oda, shiryawa da inda za a je.

Sami Farashin Fim ɗin PVC Mai Sauƙi

Game da Ƙungiyar Roba ta HSQY

Kamfanin HSQY Plastic Group yana samar da fina-finan PVC masu sassauƙa, murfin ɗaure PVC, zanen PVC mai tauri, zanen PET, zanen PP da kayan filastik na musamman ga abokan cinikin B2B na ƙasashen waje.

HSQY tana tallafawa masana'antun kayan rubutu, masana'antun ɗaurewa, masu canza kayan takardu, firintoci, kamfanonin walda, masu shigo da kaya da masu rarrabawa tare da zaɓin tsari, samfura, samarwa na musamman, dubawa da kuma shirya kayan fitarwa.

Nemi Ƙimar da Samfura