Danfara jumɛn bɛ PVC Ni PS Plastiki cɛ?

Yala PVC barika ka bon ni PS ye wa ? Yala PS ka jɛya ka tɛmɛ PVC kan wa ? Nin plastiki sɛbɛnfura min bɛ kɛ fila ninnu ɲɛ bɛ ɲɔgɔn na, nka u ka baara kɛcogo tɛ kelen ye kosɛbɛ. PVC ka gɛlɛn ka tɛmɛ. PS ka nɔgɔn.
Nin sɛbɛn in kɔnɔ, aw bɛna u sumacogo dɔn pakew dilanni, u jɔli ani fɛn wɛrɛw la.

PVC Plastiki ye mun ye?

PVC kɔrɔ ye polivinili kuloridi ye. O ye plastiki fɛnw dɔ ye min bɛ kɛ ka caya diɲɛ kɔnɔ. Tuma caman na, i bɛna a sɔrɔ pɔnpe pipew la, finɛtiriw la, kabali insulasi la, ani hali furakɛli tubabukan na. Fɛn min b’a To a ka di mɔgɔw ye, o ye a fanga n’a ka baarakɛcogo caman ye. A bɛ se ka a yɛrɛ minɛ kosɛbɛ ka se a gosi, a ka ji la ani a ka kemikɛli caman na.

A fana ye tasuma-fanga-minɛn ye a dacogo la. O kɔrɔ ye ko a tɛ tasuma minɛ nɔgɔya la, o de y’a to a ka di boonbatigiw ye ka baara kɛ n’a ye sidingɛ ni filiw kama. Mɔgɔw ​​bɛ PVC sugandi bawo a sɔngɔ ka nɔgɔn wa a bɛ baara kɛ ni dannaya ye sigida caman na.

PVC suguya belebele fila bɛ yen . Kelen ye fɛn ye min bɛ se ka wuli, a bɛ wele fana ko plastiki PVC . Nin cogoya in bɛ nɔgɔya ni plastiki farali ye a kan, o la a kuru ka nɔgɔn. A bɛ baara kɛ ka ɲɛ hose walima kabali dacogo la. Sugu tɔ kelen ye fɛn gɛlɛn ye. A bɛ fɔ a ma ko u PVC walima a ma plastiki PVC . A ka gɛlɛn ani a barika ka bon, o b’a to a ka ɲi pibilikiw ni jɔli yɔrɔw ma.

Ɛntɛrinɛti ɲɛmɔgɔw fana ye sɛgɛsɛgɛli kɛrɛnkɛrɛnnenw labɛn i n’a fɔ C PVC ani PVC -O. C PVC bɛ se ka ji funteni minɛ ka ɲɛ, wa a bɛ kɛ so kɔnɔ pɔnpew la. PVC -O fanga wɛrɛ bɛ a la ka bɔ a baaracogo la, o la a ka ɲi kosɛbɛ pibilikiw la minnu bɛ tansiyɔnba la.

Nin ye a lajɛ teliya la suguyaw bɛ tali kɛ ɲɔgɔn na cogo min na:

Suguda	sɛgɛsɛgɛli	Baarakɛcogo caman na	Kɔlɔsiliw
PVC -U	Makama	Pipuw, finɛtiriw	Fanga ni muɲuli ka bon
PVC -P	Labilalen	Kablon insulation, tubabukan	A bɛ nɔgɔya ni plastiki ye
C PVC	Makama	Ji funteni pibilikiw	Funteni muɲuni ka fisa
PVC -O	Makama	Tansiyɔn pipew (pipes de pression).	A ka nɔgɔn, a tɛ se ka gosi

PVC bɛ yen kabini san 1900 daminɛ na. O ye plastiki gɛlɛn ye, min ka nɔgɔn, a bɛ se ka kɛ cogo la, ka kulɛri kɛ, ka kɛ ka kɛɲɛ ni mɔgɔw sago ye cogo caman na. O de y’a to a bɛ to ka diya kosɛbɛ izini suguya caman na bi.

PS Plastiki ye mun ye?

PS , walima polisitiri, ye plastiki sugu dɔ ye min bɛ kɛ i n’a fɔ a ka nɔgɔn nka a bɛ to ka gɛlɛya. Aw bɛna a ye tuma caman na ko a bɛ kɛ don o don fɛnw na minnu bɛ kɛ siɲɛ kelen i n’a fɔ dumuni sanubɔlanw , foroko, kuyɛri, ani o plastiki tasaw jɛlenw ɲɛnajɛw la. A ka di mɔgɔw ye bawo a dilanni musaka ka dɔgɔ ani a dilanni ka nɔgɔn ni fɛn dilanni ye. O de y’a to a bɛ jira fɛn bɛɛ la k’a ta pakew foroko la ka se CD ni DVD kɛsu ma.

O fɛn in ɲɛ bɛ nɔgɔya ani a jɛlen don kosɛbɛ, kɛrɛnkɛrɛnnenya la a cogo gɛlɛn na. A ka c’a la, a bɛ kɛ sɛbɛnfura min bɛ kɛ s jɛlenw walima kulɛrilenw ye, minnu bɛ wele ko PS sɛbɛnfura min bɛ kɛ s. Mɔgɔw ​​bɛ baara kɛ n’u ye taamasiyɛnw kɔnɔ, dumunikɛminɛnw kɔnɔ, finɛtiriw kɔnɔ ani piblisitew kɔnɔ. Ikomi a bɛ kuran lamini kosɛbɛ, i bɛ se k’a ye fana ko a bɛ kɛ ɛntɛrinɛti yɔrɔw la.

Nka polisitiri tɛ se ka a yɛrɛ minɛ ka ɲɛ ni a gosira. Ni aw ye a fili, a bɛ se ka kari walima ka kari. PVC , min bɛ tasuma kɛlɛ, PS tɛ kelen ye, a dɔnna ko a bɛ tasuma minɛ nɔgɔya la. Tiɲɛ na, ni a bɛ kɛ sow kɔnɔ, a ka kan ka datugu kogow kɔfɛ walima ni bɛton ye walasa ka lakana sariyaw labato.

Polisitiri bɛ sɔrɔ suguya damadɔw la, i n’a fɔ fomu ni fɛn gɛlɛnw. Nin ye sangaɲɔgɔnma ye:

Type	Appearance	Common Uses	Notes
Jɛkuluba PS	A jɛlen don walima a kulɛrilen don	CD-kɛsu, minɛnw	A ka gɛlɛn ani a bɛ kari
HIPS	Opaque (Opaque) ye	Tulonkɛfɛnw, minɛnw	A bɛ se ka nɔ bila
E PS (fomu) .	Fini, yeelen	Foroko, insulasi	A bɛ bonya ka ɲɛsin cushioning ma

A bɛ yen kabini san 1930, wa a bɛ to ka kɛ fɛn ye min ka di kosɛbɛ pakew dilanni diɲɛ kɔnɔ. Aw k’a to aw hakili la dɔrɔn ko hali n’a bɛ se ka segin ka kɛ fɛn wɛrɛ ye, yɔrɔ caman t’a lasegin a cogo kɔrɔ la k’a sababu kɛ a ka caya dɔgɔyali ye. Ni a ma ɲɛnabɔ ka ɲɛ, fomu PS bɛ se ka laban ka dugukolo ni ji nɔgɔ.

PVC vs PS Plastiki: Danfaraba jumɛnw bɛ u ni ɲɔgɔn cɛ?

PVC ni PS bɛ se ka kɛ ɲɔgɔn fɛ sɛbɛnfura min bɛ kɛ s jɛlenw na, nka u bɛ baara kɛ cogo wɛrɛ la kosɛbɛ baarakɛcogo lakika la. PVC bɛ minɛ ka ɲɛ ni a bɛ tali kɛ bɔgɔdaga walima degun na. A barika ka bon ani a bɛ se ka wuli ka bɔ a nɔ na, ​​o de b’a to a ye sugandili ɲuman ye jɔli ni pɔmpiko la. Mɔgɔw ​​bɛ baara kɛ n’a ye yɔrɔw la, fanga, waati kunbɛncogo ani lakana nafa ka bon yɔrɔ minnu na.

PS ka nɔgɔn, a ka gɛlɛn, wa a dilanni ka nɔgɔn ka kɛ cogoya kɛrɛnkɛrɛnnenw ye. I bɛna a ye foroko minnu bɛ kɛ siɲɛ kelen ani jiralan finɛtiri finmanw kɔnɔ. A jɛlen don ani a labɛnna ka ɲɛ nka a ma dilan baara gɛlɛnw kama. Ni a gosira walima ni a binna, a bɛ se ka kari. A tɛ i n’a fɔ PVC , a tɛ ɲɛ ni funteni ye fana. PS bɛ daminɛ ka Changé walima ka tiɲɛ hali sanni a ka se funteni caman ma.

U tɛ kelen ye fana u bɛ tile walima kemikɛlifɛnw minɛ cogo min na. PVC bɛ se ka asidi, kɔgɔ ani tulu caman kɛlɛ. A yɛrɛ bɛ a yɛrɛ minɛ ka ɲɛ jibolisiraw la ani kɛnɛma baara la. PS bɛ kemikɛli nɔgɔmanw minɛ nka a tɛ mɛn o cogo la, kɛrɛnkɛrɛnnenya la ni a bilala tile yeelen tilennen na.

Sisan an k'u lajɛ kɛrɛfɛ:

Fɛnɲɛnɛma	PVC Plastiki fèy	PS Plastiki fèy
Hakɛ	1,3 – 1,45 g/cm³	1,04 – 1,06 g/cm³
Fanga & Gɛlɛya	Jamanjan	Fɛ́gɛn
Fɛn min bɛ se ka fɛn caman sɛgɛsɛgɛ	Ka bɛrɛbɛn	Fɛ́gɛn
UV Resistance (UV kɛlɛli).	Fɛ́gɛn	Fɛ́gɛn
Kimiki Rezisti (Kimikɛ) min bɛ se ka banakisɛw kɛlɛ	Ɲuman ɲuman	Ka bɛrɛbɛn
Funteni kunbɛncogo	Fo ka se 60°C ma ( PVC ), 90°C (C PVC ) .	A bɛ daminɛ ka toli ni temps dɔgɔmanw ye
Tasuma-fanga-minɛnw	Tasuma-fanga-minɛn	A bɛ tasuma don kosɛbɛ
Aplikasi minnu bɛ kɛ	Pipuw, cladding, taamasiyɛnw	Foroko, insulasi, jiralanw

PVC bɛ bɛn baara gɛlɛnw ma walima baara banbaliw ma. PS bɛ bɛn kosɛbɛ yɔrɔ min na ɲɛda cogoya, jɛya, ani musaka dɔgɔman bɛ fɔlɔ.

Plastiki jumɛn ka fisa ni pakew dilanni ye? PS ni PVC cɛ.

Ni a bɛ fɔ pakew ma, PS ni PVC sɛbɛnfura min bɛ kɛ s fila bɛɛ n’u jɔyɔrɔ don. Nka u tɛ baara kɛ cogo kelen na. Ni aw bɛ fɛn dɔ pake min ka nɔgɔn ani min bɛ se ka kɛ siɲɛ kelen i n’a fɔ dumuni walima dumuni misɛnninw, . PS sɛbɛnfura min bɛ kɛ bɛ se ka kɛ pick ɲuman ye. A jɛlen don, a ka gɛlɛn, wa a cogoya ka nɔgɔn. O de kama a bɛ kɛ tuma caman na dawolo la, sanubɔlanw , ani finɛtiri jɛlenw na dumunikɛminɛnw kɛsu kan.

PS bɛ i ko a ka ɲi ani a bɛ jiracogo saniyalen di. A b’a to i ka fɛn dilannen bɛ bɔ kɛnɛ kan k’a sɔrɔ a ma girinya fara a kan. A ka di maganw ye bawo a bɛ kiliyanw dɛmɛ u ka o fɛn ye o yɔrɔnin bɛɛ. Nka jagokɛcogo dɔ bɛ yen. PS tɛ bɔgɔbɔgɔli kunbɛn ka ɲɛ wa a bɛ se ka kari bolifɛn ta waati. Ka fara o kan, a tɛna mɔgɔ tanga kosɛbɛ ji walima buguri ma.

PVC sɛbɛnfura min bɛ kɛ , kɛrɛnkɛrɛnnenya la jɛlen PVC , o bɛ baara kɛ ka ɲɛ ni laɲini ye ka fɛn dilannen lakana. A bɛ se ka wuli ka tɛmɛ PS kan, o la a bɛ biri k’a sɔrɔ a ma kari. A bɛ ji, buguri ani fiɲɛ fana bali ka ɲɛ. O b’a to a dafalen don pakew kama minnu ka kan ka to u datugulen na walima minnu ka saniya, i n’a fɔ ɛntɛrinɛti, ɲɛgɛnw, walima kɛnɛya furaw.

U bɛ ɲɔgɔn sanga cogo min na kɛrɛfɛ, o filɛ nin ye:

Nafolo	PS fèy	PVC sɛbɛnfura
Kɔrɔfɔli	A ka bon kosɛbɛ	Jamanjan
Barika	Fɛ́gɛn	A bɛ dantɛmɛ fo ka se a danma ma
Fɛn min bɛ se ka fɛn caman sɛgɛsɛgɛ	Fɛ́gɛn	Ka bɛrɛbɛn
Ji Lakanali	Faantan	Duman
Baara kɛcogo ɲuman	A jira sanubɔlanw , dumunikɛminɛnw	Box jɛlenw, pakew datugulenw

O la ni i ka fɛn dilannen mago bɛ ka ɲɛ ka ɲɛ tabali kan, PS bɛ se ka kɛ sira ye. Nka ni a mago bɛ ka to saniya la, ka ja, walima ka to a la ci waati la, PVC bɛ mankutu caman di.

Yala PVC ka funteni-kɛlɛ ka ca ni PS ye wa ?

A filɛli fɔlɔ la, PS bɛ i n’a fɔ setigi ni funteni ko don. A wuliyɔrɔ bɛ 240°C lamini, o ka bon kosɛbɛ ka tɛmɛ PVC basigilen kan. Nka minɛni dɔ bɛ yen. Hali sani a ka wuli, PS bɛ daminɛ ka tiɲɛ walima ka wuli ni funteni dɔgɔyara. O b’a to farati bɛ a la dɔɔnin fɛn o fɛn na min bɛ funteni basigilen na walima sigida minnu ka suma.

PVC , faan wɛrɛ fɛ, a bɛ to ka sabati funteni damadɔ kɔrɔ. Standard PVC bɛ se ka se ka se 60°C ɲɔgɔn ma sani a ka daminɛ ka nɔgɔya. O man bon kosɛbɛ, nka a bɛ se ka fɔ ka ɲɛ, wa a farati tɛ don o don baara la i n’a fɔ jibɔ walima insulasi.

N'an ye senna-tɛgɛrɛ Kɛ baarakɛyɔrɔw la minnu ka funteni ka bon, C PVC bɛ yen. PVC bɔko in bɛ tɛmɛ fɛɛrɛ kɛrɛnkɛrɛnnen dɔ fɛ walasa ka funteni kunbɛn ka ɲɛ. A bɛ baara kɛ ka ɲɛ fo ka se 93°C ma ani tuma dɔw la ka tɛmɛ o kan. O de kama mɔgɔw bɛ baara kɛ n’a ye jisuma na, kɛrɛnkɛrɛnnenya la so kɔnɔ pɔnpew la. A bɛ nɔgɔya kunbɛn, a bɛ to barika la, wa a tɛ sisi juguw bɔ joona i n’a fɔ PS .

U bɛ ɲɔgɔn sanga cogo min na, o lajɛ teliya filɛ nin ye:

Material	Melting Point	Practical Heat Tolerance	Suitable Applications
PS	A bɛ 240°C lamini	A bɛ toli 100°C duguma	Sani, jiralanw
PVC	75–105°C ye	Fo ka se 60°C ma	Ji nɛnɛ pibilikiw, taamasiyɛnw
C PVC	90–110°C ye	Fo ka se 93°C ma	Ji funteni pibilikiw, so kɔnɔ pɔmpi

O la hali ni PS bɛ wuli fɛɛrɛko siratigɛ la ni funteni hakɛ ye min ka bon, a tɛ kisi funteni ma tuma bɛɛ. PVC , kɛrɛnkɛrɛnnenya la C PVC , bɛ diɲɛ funteni lakika ɲɛnabɔ ka ɲɛ.

Sigida laminiko gɛlɛya: PVC ni PS fèy

Ni an bɛ kuma plastiki kan, mɔgɔw ka teli k’a ɲininka ko jumɛn bɛ tiɲɛni kɛ dugukolo kan kosɛbɛ. PVC ni PS fila bɛɛ bɛ na ni gɛlɛyaw ye, nka cogoya wɛrɛw la. PVC bɛ se ka segin ka kɛ fɛn wɛrɛ ye, wa segin kɛcogo kura bɛ ka ɲɛtaa sɔrɔ. O bɛɛ n’a ta, ni a jeni, a bɛ se ka gazi kulori bɔ. O ye farati ye fiɲɛ ni hadamaden ka kɛnɛya bɛɛ ma. A fana bɛ waati jan ta ka tiɲɛ, o la a ka kan ka minɛ ka ɲɛ.

PS sɛbɛnfura min bɛ kɛ fana bɛ se ka segin ka kɛ fɛn wɛrɛ ye, nka a baara man nɔgɔn tuma bɛɛ. A girinya nɔgɔman ani a fomu cogoya b’a to a dalajɛli n’a saniya ka gɛlɛn. Ni a nɔgɔlen don, fɛnw lasegincogo izini fanba tɛna sɔn a ma. O de kosɔn, PS caman bɛ laban binkɛnɛw walima kɔgɔjiw la. Fomu nɔgɔ i n’a fɔ Styrofoam, o ye plastiki nɔgɔ sanfɛla dɔ ye min bɛ sɔrɔ kɔgɔjida la.

Jagokɛyɔrɔ dɔw bɛ furaw ɲini sisan minnu ka kɛnɛ. Bio-based PVC ani plastiki sɛbɛnfura min bɛ kɛ fɛnw minnu bɛ se ka segin kosɛbɛ, olu bɛ ka caya. O fɛnw bɛ plastiki nafa mara nka u bɛ sigida tiɲɛni dɔgɔya.

Factor	PVC sɛbɛnfura	PS fèy
Segin-ka-bɔnye kɛli	Ka bɛrɛbɛn	Fɛ́gɛn
Jeninida farati	A bɛ gazi kulori bɔ	A bɛ nɔgɔ ni kabon bɔ
Kɔgɔjida nɔgɔli farati	Dɔgɔya (ni a minɛna) .	Kɔrɔta, kɛrɛnkɛrɛnnenya la fomu suguyaw
Bioplastiki Sugandiliw	A bɛ sɔrɔ (bio- PVC ) .	Dantigɛlen don
Ko min bɛ kɛ tuma caman na ka ɲɛsin fɛnw bɔli ma	Jeni, binkɛnɛ	Nɔgɔ minnu bɛ bin, nɔgɔ minnu bɛ panpan

An bɛɛ jɔyɔrɔ ka bon plastiki tiɲɛniw dɔgɔyali la. Fɛn minnu bɛ se ka segin ka kɛ fɛn wɛrɛw ye walima minnu tɛ kojugu kɛ, olu sugandili bɛ dɛmɛ caman kɛ ka tɛmɛ mɔgɔw hakili la.

PVC ni PS fèy ka baarakɛcogo caman s

PVC ani PS sɛbɛnfura min bɛ kɛ s bɛ baara kɛ izini suguya wɛrɛw la, nka u fila bɛɛ bɛ jira fɛnw na an bɛ minnu ye don o don. PVC barika ka bon, a bɛ se ka waati kunbɛn, wa a bɛ a yɛrɛ minɛ degun kɔrɔ. O de y’a to a ka ca so jɔli la, kɛnɛyako la, hali kɛnɛma yɔrɔw la. An bɛ baara kɛ n’a ye pibilikiw, tubabukan, kogow, ani panɛri jɛlenw ye pakew kɔnɔ. A bɛ baara kɛ koɲuman fana kuran siratigɛ la bawo a bɛ kabali ni nɛgɛw tanga.

PS , o ni ɲɔgɔn cɛ, a ka nɔgɔn wa a cogoya ka nɔgɔn. A ka ɲi kosɛbɛ fɛnw ma minnu bɛ kɛ waati kunkurunnin kɔnɔ, minnu tɛ nɔba bila u la. Mɔgɔw ​​ka teli ka PS sugandi ni u mago bɛ minɛn jɛlenw na walima jiralan nɔgɔmanw na. Miiri dumuni teliyalenw na sanubɔlanw , plastiki minɛnw, walima o kɛsu jɛlenw na minnu bɛ CD ni DVDw mara. A fana bɛ dege kosɛbɛ daɲɛw la i n’a fɔ taamasiyɛnw, bololabaara porozɛw, ani lakanani ɛkranw.

Baarakɛcogo dɔw bɛ yen minnu ka ca kosɛbɛ:

PVC sɛbɛnfura Baarakɛcogo	PS fèy Baarakɛcogo
Pipuw ni fɛnw doncogo	Dumunikɛminɛn minnu bɛ kɛ siɲɛ kelen
Furakɛcogo tubabukan	CD kɛsu, DVD foroko
Decking ani fencing (sɔgɔsɔgɔninjɛ).	Piblisite pankurunw, taamasiyɛnw
Fenɛtiriw foroko jɛlen	Tabali minɛn minnu bɛ i n’a fɔ akiriliki, olu bɛ i n’a fɔ plastiki
Kuran kabɔri insulasi	DIY bololabaara ani ekran minnu bɛ mɔgɔ tanga

Fɛn kelen-kelen bɛɛ n’a fanga don, o la u bɛ u yɛrɛ jira yɔrɔw la, o fanga nafa ka bon yɔrɔ minnu na. Baara dɔw mago bɛ fɛn caman na ani ka se ka kemikɛli kɛ. Dɔ wɛrɛw mago bɛ fɛn dɔ la min jɛlen don ani min ka nɔgɔn.

HSQY PLASTIC GROUP: PS ani PVC sɛbɛnfura Fɛnɲɛnɛmaw

HSQY PLASTIC GROUP la, an bɛ PS ani PVC sɛbɛnfura min bɛ kɛ s dilan minnu bɛ se ka da u kan, minnu bɛ se ka kɛ pakew dilanni, u jɔli ani u jiracogo ye. An ka fɛnw bɛ sariya gɛlɛnw labato minnu bɛ tali kɛ u muɲuli, u jɛlen na ani u lakanani na. I mago bɛ fɛn dɔ la min bɛ se ka wuli walima min ka gɛlɛn, an bɛ sugandiliw kɛ minnu bɛ bɛn i ka fɛn dilannenw kuntilenna ma. An bɛ dɛmɛ fana don ka kɛɲɛ ni mɔgɔw sago ye ka kɛɲɛ ni u bonya, u kulɛri ani u kɛcogo ye. An ka an ka fɛn fila lajɛ minnu dalen bɛ an na kosɛbɛ.

HSQY ye Kɔrɔlen kɛnɛyako PS fèy s

Nin PS sɛbɛnfura min bɛ kɛ w bɛ yɔrɔ saniyalen, nɔgɔlen di ani ɲɛnayeli barikama. U ka nɔgɔn, u dilanni ka nɔgɔn, wa u bɛnnen don daɲɛw ni jɔli baara suguya caman ma. An bɛ hakɛ ni kulɛri suguya caman di, minnu labɛnnen don ka bɛn sugu mago suguya wɛrɛw ma.

Fɛn dilannenw paramɛtiriw:

Sɛgɛsɛgɛli	ɲɛfɔli
Hakɛ	1,05 g/cm⊃3 ye;
A ka bon kosɛbɛ	0,8–12 mm
Kulɛri minnu bɛ sɔrɔ	A jɛlen, opal, bilen, bulu, jɛman, frosted, tinted
Taille Standard (Taamaʃyɛnw) minnu bɛ Kɛ	1220×2440 mm, 1220×1830 mm
Baarakɛcogo jɔnjɔnw	Dabaw, taamasiyɛnw, datugulanw, fototalanw

Fɛn minnu ka kan ka kɛ:

• Transparence ka bon ani gloss

• Kɔnɔnafili barikama ani kariw kɛlɛli

• UV ɲuman ani waati muɲuli

• A tɛ baga ye, a farati tɛ a kɛli la so kɔnɔ

• A dilanni n’a sɛbɛnni ka nɔgɔn

I bɛna nin sɛbɛnfura min bɛ kɛ s sɔrɔ minnu bɛ kɛ piblisite pankurunw na, jiralanw na, lakanalanw na, ani so masiri yɔrɔw la. U bɛ baara kɛ koɲuman yɔrɔw la, yɔrɔ minnu na jɛya ni gɛlɛya nafa ka bon.

PVC sɛbɛnfura jɛlen ka bɔ HSQY la

An transparent PVC sɛbɛnfura min bɛ kɛ s ka ɲi kosɛbɛ ni yecogo ni fɛn dilannenw lakanani fila bɛɛ mago bɛ u la. U girinya ka nɔgɔn nka u barika ka bon fo u tɛ se ka kɔrɔta, ka sɔgɔsɔgɔ ani ka nɔgɔ. Markatigiw bɛ baara kɛ n’u ye finɛtiriw kɔnɔ, kartɔnw kɔnɔ minnu bɛ se ka da, ani feerekɛyɔrɔw jirayɔrɔw la.

Fɛn dilannenw paramɛtiriw:

Sɛgɛsɛgɛli	ɲɛfɔli
A ka bon kosɛbɛ	125–300 mikron
Taille Standard (Taamaʃyɛnw) minnu bɛ Kɛ	700×1000 mm, 1220×2440 mm
Ladamuni hakɛw	A bɛ sɔrɔ ni ɲinini kɛra
Baarakɛcogo jɔnjɔnw	Foroko minnu bɛ kɛ ɛntɛrinɛti, ɲɛgɛnw, dumuniw kama

Fɛn minnu ka kan ka kɛ:

• Fɛn dilannenw yecogo ɲumanba ye pakew dilanni na

• Ji, buguri ani tiɲɛni balilan

• Surface min bɛ se ka sɛbɛn ka kɛ branding ye

• A cogoya ka nɔgɔn ani a sirili

• A bɛ bɛn finɛtiri kɛsu ni pake folilenw ma

An bɛ dɛmɛ don komandi caman na ni waati teliya ye. An ka jɛkulu bɛ fɛnw ɲɛnabɔ minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, baara minnu bɛ kɛ ni die-cut ye, ani furakɛli kɛrɛnkɛrɛnnenw i n’a fɔ anti-static coating.

Anw minnu ye polisitiri sɛbɛnfura min bɛ kɛ dilanko tɔnba ye Sinuwa kɔrɔnyanfan fɛ, an bɛ izini saba kɛrɛnkɛrɛnnenw ɲɛminɛ ani tilayɔrɔ 9. O kɔrɔ ye ko fɛnw dicogo sabatilen, jogoɲumanya sabatili, ani baarakɛcogo min bɛ jaabi di.

Sugandili kɛcogo PS ni PVC sɛbɛnfura cɛ s

N’i ​​b’a ɲini ka latigɛ kɛ PS ni PVC sɛbɛnfura min bɛ kɛ s cɛ, i k’a daminɛ ni miirili ye i ka fɛn dilannen mago bɛ fɛn min na tiɲɛ na. Porozɛ dɔw bɛ fanga ni muɲuli de wajibiya. Dɔ wɛrɛw mago bɛ fɛn dɔrɔn de la min ɲɛ jɛlen don ani min saniyalen don walasa ka jira. Aw ye nin ɲininkali ninnu kɛ aw yɛrɛ la walasa k’a dɔgɔya.

• Yala ne mago bɛ fanga la walima ka jɛya wa?

• Yala o fɛn bɛ se ka fili walima a dabɔra ka mɛn wa?

• Yala a bɛna kɛ ni funteni, kemikɛlifɛnw walima UV ye wa?

• Yala ne bɛ baara kɛ ni plastiki jɛlen ye walasa ka pakew kɛ walima ka u jira wa?

PVC barika ka bon, a bɛ se ka wuli, wa a ka fisa furakɛli gɛlɛnw tali la. A ka ca a la, a bɛ kɛ fɛnw na i n’a fɔ finimugu, pibiliki walima pake minnu ka kan ka ji, buguri walima kɛnɛma cogoyaw kɛlɛ. Ni aw b’a fɛ ka fura sɔrɔ min bɛ mɛn, o de ka fisa.

PS , fan wɛrɛ fɛ, a ka nɔgɔn, a jɛlen don, wa a dafalen don waati kunkurunnin foroko walima fɛnw laseli kama. Tuma caman na, i bɛna a ye ko a bɛ kɛ burufefeerelaw ka kɛsu kɔnɔ, feerekɛyɔrɔw finɛtiriw la, ani daɲɛw jiracogo la. A dilanni ka nɔgɔn ani a bɛ dakun nɔgɔlenw ni finiw nɔgɔlenw di.

Nin ye gafe teliyalen ye min b’aw dɛmɛ ka ɲɔgɔn sanga:

Nafolo	PVC sɛbɛnfura	PS fèy
Barika	Sanfɛ	Ka lajigin
Kɔrɔfɔli	Duman	Ɲuman ɲuman
Fɛn min bɛ se ka fɛn caman sɛgɛsɛgɛ	Ka bɛrɛbɛn	Makama
Funteni muɲuni	Moderate (C PVC ka fisa) .	Dɔgɔya, a bɛ daminɛ ka deform kɛ ka kɔn o ɲɛ
Baara kɛcogo ɲuman	Foroko muɲu, jɔli	Ɲɛjirali yelen, min bɛ se ka fili sanubɔlanw
UV Resistance (UV) kɛlɛli	Fɛ́gɛn	Fɛ́gɛn
Ideal for	Baara kɛli kuntaalajan kɔnɔ	Pake minnu bɛ kɛ ni yeelen ye
Baarakɛcogo jɛlen min bɛ kɛ ni pakew ye	Awɔ	Awɔ

O la ni laɲini ye lakanani ye, i ka PVC ta. Ni a ka ca ni jirali ye, PS bɛ se ka kɛ sugandili hakilitigi ye.

Kuncɛli

PVC ni PS plastiki kelen-kelen bɛɛ fanga jɛlen don. PVC ka fisa fanga, jisuma kunbɛnni, ani a tali kuntaalajan na. PS bɛ baara kɛ ka ɲɛ ni girinya nɔgɔman ni jɛya de nafa ka bon kosɛbɛ. A ka ɲi kosɛbɛ pakew walima jiralanw na. Ni i bɛ sugandili kɛ u cɛma, i ka miiri u muɲuli la, u jiracogo la, ani u kuntilenna la. HSQY PLASTIC GROUP bɛ PS ani PVC sɛbɛnfura min bɛ kɛ furakɛcogo dannamɔgɔ di izini caman ma.

Ɲininkaliw minnu bɛ kɛ

Danfaraba jumɛn bɛ PVC ni PS plastiki cɛ?

PVC bɛ mɛn ka tɛmɛ ani ka fɛn caman sɛgɛsɛgɛ. PS ka nɔgɔn, a jɛlen don, nka a bɛ kari.

Yala PVC ni PS sɛbɛnfura min bɛ kɛ s fila bɛɛ bɛ se ka kɛ ka pakew dilan wa?

Awɔ. PS ka ɲi kosɛbɛ jiracogo jɛlen na. PVC bɛ lakana ni sigicogo ɲuman di.

Fɛn jumɛn de bɛ funteni kɛlɛ ka tɛmɛ?

C PVC , o ye PVC sugu dɔ ye, o bɛ funteni minɛ ka ɲɛ. PS bɛ wuli ni temps ka bon nka a bɛ bɔgɔbɔgɔ joona.

Yala PS walima PVC ka ca ni sigida laminiko ye wa?

U fila bɛɛ bɛ se ka kɛ fɛn wɛrɛw ye. Nka PS fomu ka teli ka laban binkɛnɛw walima kɔgɔjiw la. PVC segin-ka-bɔnye bɛ ka ɲɛtaa sɔrɔ.

HSQY bɛ fɛn jumɛnw di PS ani PVC sɛbɛnfura min bɛ kɛ s kɔnɔ?

HSQY bɛ kɛnɛyaba di PS sɛbɛnfura min bɛ kɛ s ani PVC sɛbɛnfura min bɛ kɛ s jɛlenw di pakew dilanni, taamasiyɛnw, ani jɔli ma.