A4 A5 Plastiki sirilanw bɛ PVC, PP ani PET la

A4 A5 Plastiki sirilanw bɛ PVC, PP ani PET la

HSQY A4 ani A5 plastiki sirilanw dabɔra rapɔɔriw, jirali, gafew, laɲiniw, gafesɛbɛnw, lakɔli porozɛw ani baarakɛlaw ka sɛbɛnw sirili kama. A bɛ sɔrɔ PVC, PP ani PET la, o datugulanw bɛ dɛmɛ don ka sɛbɛnw lakana ka sɔrɔ k’u yecogo n’u jiracogo ɲɛ.

A janya bɛ daminɛ milimɛtɛrɛ 0,10 na ka se milimɛtɛrɛ 0,20 ma, ni kulɛri jɛlenw, finmanw, bilenmanw, buluw, jɛmanw ani kulɛriw bɛ sɔrɔ minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye. Surface suganditaw ye glossy, matte, frosted, striped ani embossed finiw ye. A3, A4, A5, Sɛbɛn ani hakɛ minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu bɛ se ka di sɛbɛnnikɛlanw feerelaw ma, biro kɔnɔfɛnw feerelaw ma, sɛbɛnnikɛlaw ma, sirili sosiyetew ma ani mɔgɔ kelen-kelen ka taamasiyɛnw ma.

Plastiki sirili Cover Wideyo

Plastiki sirilan ye mun ye?

Datugulan min bɛ siri, o ye ɲɛfɛla walima kɔfɛ sɛbɛn ye min bɛ mɔgɔ tanga, min bɛ kɛ rapɔɔri, jiracogo, gafe sirilen, hakilina walima gafe sirilen kan. A bɛ lakanani wɛrɛ di buguri, bolokɔnincininw, yeelenbɔlanw, kurukuruniw ani don o don baarakɛcogo ma k’a sɔrɔ a bɛ sɛbɛn banbali dɛmɛ ka kɛ baarakɛla ye.

Plastiki sirilanw bɛ se ka dilan ni PVC, poliporopilini (PP) walima polietilɛni tereftalati (PET) ye. Fɛn kelen-kelen bɛɛ bɛ balansi wɛrɛ di jɛya, sɛgɛsɛgɛli, gɛlɛya, sanfɛla cogoya ani baarakɛcogo cogoyaw la.

A ka c’a la, baara bɛ kɛ ni ɲɛda datugulan jɛlenw ye i n’a fɔ ɲɛda ɲɛ fɔlɔw bawo tɔgɔ sɛbɛnnen bɛ to ka ye. Datugulan minnu bɛ kɛ ni nɛnɛ ye, minnu bɛ kɛ ni nɛnɛ ye, minnu ɲɛw ye ɲɛgɛnw ye walima minnu tɛ ye, olu bɛ se ka kɛ ɲɛfɛ walima kɔfɛ datugulanw kama, yɔrɔ minnu na, a ka kan ka kɛ ni ɲɛnayeli dɔgɔyali ye, ka mɔgɔ dogo, ka kulɛri kodɔn walima ka taamasiyɛn kɛ.

A4 A5 Binding Cover Fɛn dilannenw Jaw

A4 A5 Plastiki sirili datugulan ɲɛfɔli

HSQY bɛ plastiki sirilanw dilan sɛbɛnw hakɛ dantigɛlenw na ani u hakɛw la minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye. Fɛn min bɛ kɛ, a bonya, a kulɛri, a jɛlen, a ɲɛda cogoya, a tigɛcogo, a sɔgɔli, a logo sɛbɛnni ani a pake bɛ se ka baro kɛ ka kɛɲɛ ni sannikɛla ka ɲinini ye.

Reference Mekaniki Donanw

Nin masin nafa ninnu tun bɛ sɔrɔ fɛn dilannenw ɲɛ kan. Ikomi PVC, PP ani PET ka fɛnw cogoya tɛ kelen ye, o nafaw man kan ka jate i n’a fɔ diɲɛ bɛɛ ka fɛn ɲɛfɔlenw sirili-datugulan fɛn bɛɛ la. Aw bɛ fɛɛrɛko kunnafoniw minnu bɛ tali kɛ fɛn kɛrɛnkɛrɛnnenw na, aw bɛ olu dafa sani u ka baara kɛ ni fɛn caman ye.

PVC ni PP ni PET sirili datugulanw

PVC, PP ani PET bɛɛ bɛ se ka kɛ plastiki sirilanw ye, nka u jogo tɛ kelen ye. Sannikɛlaw ka kan ka fɛn in sugandi ka kɛɲɛ ni kɛnɛya, gɛlɛya, sɛgɛsɛgɛli, sanfɛla fini, sɛbɛnni wajibiyalenw ani sugu laɲinitaw ye.

A4 A5 A3 ani Sɛbɛnw sirili dakunw hakɛw

Binding Cover Surface finiw

Fɛnɲɛnɛma danfaralenw bɛ sirili datugulan yecogo, a jɛlen ani a magali cogoya Changer. Sannikɛlaw bɛ se ka fini dɔ sugandi ka kɛɲɛ ni sɛbɛn suguya ye, marka jɔyɔrɔ ani jiracogo nɔ min b’a fɛ.

Nafa jɔnjɔn minnu bɛ sɔrɔ plastiki sirilanw na

Sɛbɛnw lakanani: Plastiki datugulanw bɛ dɛmɛ ka rapɔɔriw ni sɛbɛnw lakana ka bɔ buguri, bolokɔniw, yeelenbɔlanw, kurukuruniw ani u minɛcogo la tiɲɛni na.

Baarakɛlaw ka yecogo : Fɛn minnu bɛ kɛ ka jɛya, minnu tɛ fɛn ye, minnu bɛ kɛ ni nɛnɛ ye ani minnu bɛ kɛ ni fɛn dɔw ye, olu bɛ rapɔɔriw, laɲiniw, gafesɛbɛnw ani gafew jiracogo ɲɛ.

Fɛn caman sugandili : PVC, PP ani PET b’a to sannikɛlaw bɛ se ka jɛya, gɛlɛya ani sɛgɛsɛgɛli faralen ɲɔgɔn kan cogoya wɛrɛw sugandi.

Kulɛriw ni finiw minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye: Kulɛri minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye ani minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu bɛ se ka dɛmɛ don sosiyete ka taamasiyɛnw dilanni na, ka baarakɛyɔrɔw ka danfara don u ni ɲɔgɔn cɛ ani sɛbɛnnikɛlanw ka porogaramuw la minnu bɛ kɛ mɔgɔ kelen-kelen bɛɛ fɛ.

Flexible Binding Compatibility: Datugulan bɛ se ka dilan ni punch tɛ walima ka baara kɛ ka kɛɲɛ ni sannikɛla ka comb, wire, coil walima ring-binding system ye.

Siricogo minnu bɛ bɛn ɲɔgɔn ma

Plastiki sirilanw bɛ kɛ ka caya ni sɛbɛnw sirilan caman ye. Datugulan jɔnjɔnw bɛ se ka dilan ni dingɛw tɛ, ka sɔrɔ punching customized bɛ se ka baro kɛ ni dingɛ cogoya, dingɛ hakɛ, dingɛ hakɛ, dakun janya ani sɛbɛn ɲɛcogo dira.

• Plastiki comb sirili.

• Filɛri sirili.

• Spiral ni coil sirili.

• Ring binder systems (bololanɛgɛ sirilanw).

• Strip sirili.

• Punched binding systems wɛrɛw minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

Plastiki sirili datugulanw kɛcogo

Plastiki sirilanw bɛ baara kɛ kosɛbɛ biro feerelaw fɛ, sɛbɛnnikɛlanw, gafe sirili baarakɛlaw fɛ, sɛbɛnnikɛlanw feerelaw fɛ, lakɔlisow fɛ, kalanjɛkuluw fɛ ani birofɛnw feerelaw fɛ minnu tɔgɔ ye ko mɔgɔ kelen-kelen bɛɛ.

Baarakɛlaw ka kunnafonidisɛbɛnw: Raporow, laɲiniw, jirali, tenderiw ani jɛkulu ka sɛbɛnw.

Kalankɛminɛnw: Kalandenw ka porozɛw, kalankɛminɛnw, kalan gafew ani lakɔli jiracogo.

Gafew ni gafew: Ladilikan gafew, baarakɛcogo sɛbɛnw ani kunnafonisɛbɛn minnu bɛ baara kɛ tuma caman na.

OEM ani Privé Label Binding Covers

HSQY bɛ dɛmɛ don sirili-datugulan porogaramuw la minnu bɛ kɛ ka kɛɲɛ ni u yɛrɛ sago ye biro kɔnɔfɛnw feerelaw ye, sɛbɛnnikɛlanw tɔgɔlafɛnw, jɛgɛfeerelaw ani sɛbɛnnikɛlaw ye. Ladamuni bɛ se ka kɛ fɛnw ye, u bonya, u bonya, u kulɛri, u jɛlen, u ɲɛda cogoya, u nkɔni cogoya, u sɔgɔli ani u foroko.

Baro bɛ se ka kɛ logo ni ja sɛbɛnni kan ka kɛɲɛ ni fɛnw ni sɛbɛnni kɛcogo ye. Sannikɛlaw ka kan ka seko ni dɔnko baara, sɛbɛnni jɔyɔrɔ, kulɛri wajibiyalenw ani sɔgɔli jigiyaw di sani u ka baara kɛcogo kɔrɔbɔ.

Kɛrɛnkɛrɛnnenya la, pakew dilanni suganditaw bɛ se ka kɛ sɛbɛnw jatebɔ ye min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, PE bɔrɔw, shrink pakew, labeliw, barɔdiw, sɛbɛnw doncogo sɛbɛnnenw, jagokɛyɔrɔw ka kartɔnw ani kartɔn taamasiyɛnw.

Jogoɲumanya kɔlɔsili ka ɲɛsin plastiki sirili datugulanw ma

Binding-cover jogo ka kan ka jateminɛ ka kɛɲɛ ni sample ni sanniko ɲɛfɔli ye min dabɔra. Sɛgɛsɛgɛli fɛn minnu bɛ kɛ cogoya la, olu bɛ se ka kɛ ninnu ye:

• Fɛnɲɛnɛma ni kalasi sɛgɛsɛgɛli.

• A bonya ni a bonya muɲuni.

• A4, A5, A3 walima hakɛ minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• Sheet squareness ani a dakun cogoya.

• Flatness ani kurulen.

• Clarity, haze ani tint ka ɲɛsin datugulan jɛlenw ma.

• Surface texture ani embossing consistance.

• Kulɛriw bɛ ɲɔgɔn sɔrɔ sɛnɛfɛnw dilanni kuluw ni ɲɔgɔn cɛ.

• Kurukuruw, nɔnɔ nɛrɛmugumaw, bugunw ani nɔgɔ.

• Punching position ani hole-edge quality yɔrɔ minnu na a mago bɛ a la.

• Printing adhesion yɔrɔ min na logo sɛbɛnni ka kan ka kɛ.

• Sɛbɛn jate, pake hakɛ ani kartɔn taamasiyɛn.

Foroko ni fɛnw lasecogo

Misaliw foroko : A4 walima A5 sirili-datugulan misaliw bɛ se ka pake PE bɔrɔw ni kartɔnw kɔnɔ ka kɛɲɛ ni misali hakɛ ye.

Datugulan foroko: Datugulan dafalenw bɛ se ka siri PE filimu walima bɔrɔw kɔnɔ ka u kɛ kartɔnw kɔnɔ ka kɛɲɛ ni bɛnkansɛbɛnw jate ye.

Palɛti foroko : Palɛti doni min bɛ tali kɛ a la, o bɛ se kilo 500-2000 ma ka kɛɲɛ ni fɛnw ye, datugulan hakɛ ani pakew cogoya.

Minɛnw doni : Jama yamaruyaw bɛ se ka ɲɛ ka kɛɲɛ ni 20ft walima 40ft minɛnw doni ye ka kɛɲɛ ni kartɔn hakɛw ye ani doni dantigɛli sariya siratigɛ la.

Lasecogo: FOB, CIF ani EXW sugandiliw bɛ sɔrɔ.

Reference Lead Time: Tile 7-15 ɲɔgɔn bilalen kɔfɛ, ka kɛɲɛ ni fɛnw ye, u kulɛri, u kɛcogo, u foroko kɔnɔ ani u komandi hakɛ.

Sɛbɛnw ni jogoɲumanya sɛbɛnw

Sɛgɛsɛgɛli rapɔɔri minnu bɛ sɔrɔ ani jogoɲumanya sɛbɛnw bɛ bɔ PVC, PP walima PET fɛn sugandilenw na ani fɛnw ɲɛfɔcogo tigitigi la min yamaruyara. Ni aw ka sugu bɛ SGS, RoHS, REACH walima sɛbɛn wɛrɛw ɲini, aw bɛ sariya wajibiyalen dafa sani aw ka komandi kɛ.

HSQY Plastic Group Duniya Ɲɛjiraliw

HSQY Plastic Group bɛ diɲɛ feerekɛlaw, sɛbɛnnikɛlanw, fɛn caman tigɛlikɛlaw ani izini kuntigiw kunbɛn diɲɛ ɲɛjiraliw la walasa ka baro kɛ plastiki sɛbɛnw kan, u ka fɛn ɲɛfɔlenw, OEM ka pakew dilanni jɛ-ka-baara kuntaalajan kɔnɔ.

Ɲininkali minnu bɛ kɛ tuma caman na plastiki sirilanw kan

Plastiki sirilanw bɛ kɛ mun na?

Plastiki sirilanw bɛ kɛ i n’a fɔ rapɔɔriw, jiracogo, laɲiniw, gafew, gafesɛbɛnw, kalan sɛbɛnw ani fɛn wɛrɛw minnu sirilen don baarakɛlaw fɛ, olu ɲɛfɛla walima kɔfɛla lakanani.

Yala A4 ni A5 sirilanw bɛ sɔrɔ wa?

Awɔ. A4 ni A5 hakɛw bɛ se ka dilan, ka fara A3, Letter ani sɛbɛn-datugulan hakɛw kan minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye. Hakɛ labanw ni muɲuli ka kan ka dafa ni komandi bɛ kɛ.

Fɛn jumɛnw bɛ sɔrɔ datugulanw sirili kama?

HSQY bɛ PVC, PP ani PET plastiki sirilanw dilan. Fɛn minnu bɛ kɛ ka fɛnw sugandi, olu bɛ bɔ jɛya wajibiyalenw na, u bɛ se ka fɛn caman sɛgɛsɛgɛ, u ka gɛlɛya, u sanfɛla labɛncogo ani u baara laban wajibiyalenw.

Fɛnɲɛnɛma jumɛnw bɛ sɔrɔ?

Sisan fɛn dilannenw ɲɛfɔli bɛ 0,10mm fo 0,20mm jira. HSQY sirilan-datugulan wɛrɛw bɛ se ka kɛ ni u janya tɛ kelen ye, o la, u janya wajibiyalen ka kan ka dafa nin komandi kɛrɛnkɛrɛnnen in kama.

Danfara jumɛn bɛ datugulan glossy, matte ani frosted cɛ?

Datugulan minnu bɛ manamana, olu bɛ kɛnɛya kosɛbɛ ani ka kɛ cogo jɛlen na. Matte covers bɛ dɔ bɔ surface reflection la. Datugulan minnu bɛ kɛ ni nɛnɛ ye, olu bɛ kɛ i n’a fɔ u bɛ kɛ cogo la min bɛ yeelen bɔ, wa u bɛ se ka dɛmɛ don ka bolokɔniw ni yɔrɔ taamasiɲɛ misɛnninw dogo.

Yala sirili datugulanw bɛ se ka di ka kɔn ka sɔgɔ wa?

Custom punching bɛ se ka baro kɛ comb, wire, coil, spiral, ring ani sirili sira wɛrɛw kama. Sannikɛlaw ka kan ka dingɛ cogoya, a bonya, a dingɛ hakɛ, a dakun janya ani a ɲɛda cogoya di.

Yala HSQY bɛ se ka logo dɔ sɛbɛn sirilanw kan wa?

Logo ni ja sɛbɛnni bɛ se ka baro kɛ ka kɛɲɛ ni PVC, PP walima PET fɛn sugandilenw ye ani sɛbɛnni kɛcogo. Seko ni dɔnko baara ni sɛbɛnni wajibiyalenw ka kan ka di walasa k’u kɔrɔbɔ ani ka sɔn u ma.

Yala kulɛriw ni u ɲɛda cogoya bɛ se ka kɛ ka kɛɲɛ ni mɔgɔw sago ye wa?

Awɔ. Kulɛri jɛlenw, finmanw, bilenmanw, buluw, wuluwuluw ani minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu bɛ sɔrɔ, ka fara yɔrɔw kan minnu bɛ manamana, minnu bɛ kɛ ni nɛnɛ ye, minnu bɛ kɛ ni nɛnɛ ye, minnu bɛ sɛrɛkiliw ani minnu bɛ sɔgɔsɔgɔ, ka kɛɲɛ ni u dilanni seko ni MOQ ye.

Yala ne bɛ se ka sirili cover samples ɲini wa?

Awɔ. Misali sɔrɔli bɛ se ka dafa ka kɛɲɛ ni fɛn dilannenw ye, u bonya, u bonya, u kulɛri ani u ɲɛda fini. Aw bɛ sɛgɛsɛgɛli kɛ misaliw kan aw ka punch ni sirili minɛn lakikaw kan sani u ka kɛ caman ye.

MOQ ye mun ye plastiki sirili datugulanw na?

Sisan fɛn dilannenw kunnafoniw bɛ pake 500 ɲɔgɔn fɔ fɛn dilannenw ye minnu bɛ kɛ tuma bɛɛ ani pake 1000 minnu bɛ kɛ kulɛri kɛrɛnkɛrɛnnenw na, u bonya walima u bonya minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye. MOQ laban bɛ bɔ fɛnw ni fɛnw ɲɛfɔcogo la.

Kunnafoni jumɛnw de ka kan ka kɛ walasa ka quotation sɔrɔ?

Aw ye fɛnw di, A4/A5/A3 walima ka kɛɲɛ ni u yɛrɛ sago ye, u bonya, u kulɛri, u ɲɛda fini, u hakɛ, u punching wajibiyalen, logo wajibiyalen, sɛbɛn jate pake kelen kɔnɔ, private-label wajibiyalenw ani destination port.

Mun na an bɛ plastiki sirilanw san HSQY fɛ?

HSQY bɛ PVC, PP ani PET sirili datugulanw di sɛbɛnnikɛlanw feerelaw ma, biro kɔnɔfɛnw feerelaw ma, sɛbɛnnikɛlaw ma, sirili sosiyetew ma ani mɔgɔ kelen-kelen ka taamasiyɛnw. Sannikɛlaw bɛ se ka fɛn caman, u bonya, u kulɛriw, u kɛcogo ani u foroko ɲɛfɔcogo caman fara ɲɔgɔn kan fɛnw dilancogo porogaramu kelen kɔnɔ.

Aw ye aw ka sugu laɲinitaw ci HSQY ma, fɛn dilannenw, datugulan hakɛ, a janya, a sanfɛla fini, san hakɛ ani a foroko wajibiyalenw. An ka jɛkulu bɛ se ka dɛmɛ don ka binding-cover specification bɛnnen jateminɛ ani ka misaliw ni quotation dɔ labɛn.