HSQY 0.4mm Frosted PP Sheet Poliporopilɛni Plastiki sɛbɛn

0,4mm Frosted PP Sheet min bɛ kɛ ka sɛbɛnni ni a foroko don

HSQY bɛ poliporopilini sɛbɛnw dilan minnu janya ye milimɛtɛrɛ 0,4 ye, ka kɛ pakew kɛsu sɛbɛnnenw ye, dosiyew foli, kaye datugulanw, sɛbɛnw bɔrɔw, piblisite pannew, jatebɔlanw, tilayɔrɔw, bilayɔrɔw ani plastiki fɛn wɛrɛw minnu jiginna.

O sɛbɛn jiralen in janya tɔgɔlama ye milimɛtɛrɛ 0,4 ye ani a ɲɛda bɛ kɛ ni matɛri walima nɛnɛ ye min bɛ yeelen dɔgɔya, ka bolokɔnincininw dogo ani ka yecogo saniyalen di.

Kulɛri minnu bɛ sɔrɔ, olu ye kulɛriw ye minnu bɛ yeelen bɔ, minnu bɛ kɛ ni nɛrɛ ye, minnu bɛ kɛ ni nɛrɛ ye, minnu bɛ kɛ ni nɛrɛ ye, minnu bɛ ye, kulɛri minnu tɛ ye ani Pantone walima sample-matched shades minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

Standard PP ka surface fanga ka dɔgɔn kosɛbɛ. Sɛbɛn minnu dabɔra offset sɛbɛnni kama, UV sɛbɛnni kama, ɛkran sɛbɛnni kama, finimugu walima nɔrɔli sirili kama, olu bɛ se ka dilan ni koronawirisi furakɛli ye fan kelen walima fan fila fɛ walima ni primer ye min bɛ kɛ ka kɛɲɛ ni a kɛcogo kɛrɛnkɛrɛnnen ye.

0,4mm sɛbɛn min jiralen don, o bɛ balansi di fɛn caman sɛgɛsɛgɛli, gɛlɛya ani girinya dɔgɔyali ma, ka ɲɛsin foli, kuruli, die tigɛ, punching, stitching ani sɛbɛnnikɛlan walima pakew jiginni taabolo wɛrɛw ma.

Poliporopilini sɛbɛn minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu bɛ sɔrɔ ka bɔ milimɛtɛrɛ 0,25 ɲɔgɔn na ka se milimɛtɛrɛ 5 ma. A bonya, a ɲɛda, a kulɛri, a flakɛli ani a dilanni cogoya min bɛ sɔrɔ, o bɛ bɔ a janya ni a kɛcogo sugandilen na.

Kɔrɔsili suguya minnu bɛ se ka kɛ, olu ye PP sɛbɛnw ye minnu furakɛra ni korona ye, minnu datugulen don ni primer ye, minnu bɛ antistatique, static-dissipative, conductive, UV-stabilisé, tasuma-fagalan ani application-specific food-contact PP sɛbɛnw.

Nin fɛn sugandilenw tɛ don u yɛrɛma PP sɛbɛnfura kɔnɔ min bɛ wele ko standard frosted PP. A furakɛcogo tigitigi, a sɛgɛsɛgɛli kɛcogo, a janya, a kulɛri ani a kɛcogo laɲininen ka kan ka dafa sani a ka dilan.

A dafalen sɛgɛsɛgɛ HSQY poliporopilini sɛbɛn suguya ani farankan PP sɛbɛnfura minnu bɛ kɛ ni sɛbɛnni ye.

Frosted PP sɛbɛn sɔngɔ ɲini    Sɛbɛnni kɛcogo misaliw ɲini

Polipropylène Frosted Jaw

Frosted PP Sheet Wideyo

Aw ye wideyo lajɛ min bɛ duguma walasa ka HSQY poliporopilini sɛbɛnw lajɛ, yɔrɔ minnu bɛ sɔrɔ ani fɛnw jiginni baarakɛcogo.

0,4mm Frosted PP Sheet ye mun ye?

PP sɛbɛn min bɛ kɛ ni nɛnɛ ye milimɛtɛrɛ 0,4 ye, o ye poliporopilini sɛbɛn finman ye, a tilancɛ gɛlɛn don, a janya tɔgɔlama ye mikron 400 ye ani a ɲɛda bɛ kɛ fɛn ye min bɛ wele ko matte walima textured.

Surface texture bɛ yeelen jiralen jɛnsɛn ani ka yecogo nɔgɔlen dɔ dilan ka tɛmɛ PP surface kan min bɛ manamana kosɛbɛ.

Ka kɛɲɛ ni ɲɛgɛnw hakɛ ni sɛbɛnfura jɔcogo ye, a fɛn bɛ se ka kɛ fɛn ye min bɛ yeelen bɔ, a ɲɛ ye jɛlen ye walima min tɛ ye pewu.

Ni 0,4mm ye, a ka c’a la, PP bɛ se ka wuli ka se ka kurukuru ani ka foli kɛ k’a sɔrɔ a bɛ gɛlɛya bɛrɛ mara foli, kɛsu panɛriw, tilayɔrɔw, datugulanw ani jatebɔlanw kama.

Poliporopilini ka density ka dɔgɔn, a tɛ ji minɛ kosɛbɛ ani a bɛ se ka asidi dilu caman, alkali ani saniya furaw kɛlɛ. Furakɛcogo bɛnkan ka kan ka dafa hali bi kemikoro tigitigi, a hakɛ, a funteni ani a tali waati la.

PP sɛbɛn finman ni PP Industrie ka tɔnba

Fɛn min jiralen don, o ye PP sɛbɛn finman gɛlɛn ye, wa a man kan ka ɲagami ni poliporopilini pankurun kurulen ye walima ni izini PP-H plati belebeleba ye.

0.4mm Frosted PP sɛbɛn ɲɛnamaw

Ɲɛfɔli labanw ka kan ka PP resin walima fɛnɲɛnamafagalan tigitigi jira, a janya tɔgɔlama, a muɲuni, a bonya, a kulɛri, a ɲɛda cogoya, a furakɛcogo, a sɛbɛnni kɛcogo ani a fɛn dilannenw wajibiyalenw.

0,4mm PP sɛbɛnfura janya ni a minɛcogo

Milimɛtɛrɛ kelen bɛ bɛn mikron 1000 ma. O la, poliporopilini sɛbɛn min janya ye milimɛtɛrɛ 0,4 ye, o janya ye mikron 400 ye.

Frosted Surface Sugandiliw

Yeelen-ci ni sisi hakɛw ka kan ka suman ni sɛbɛn in dabɔra lanpanw, yeelenbɔlanw, fotota kɔkanfɛnw walima ɲɛnayeli jɛnsɛnni kama.

Korona furakɛli PP sɛbɛn min bɛ kɛ ka sɛbɛnni kɛ

Poliporopilini min ma furakɛ, a sanfɛla fanga ka dɔgɔn kosɛbɛ, o bɛ se ka dɔ bɔ tintin, finimugu ani nɔrɔli nɔrɔli la.

Korona furakɛli bɛ PP sanfɛla sɛmɛntiya, wa a bɛ se ka ji ni nɔrɔli ɲɛ ka ɲɛsin sɛbɛnni, dacogo ani sirili ma.

Kunnafonidila ka kan k’a jira ni fan kelen walima fan fila bɛɛ mago bɛ furakɛli la ani ka sɛbɛnni fan jira min bɛ foroko sɛbɛn kan.

Corona furakɛli bɛ se ka dɔgɔya a marali waati. Surface fanga ka kan ka lajɛ sani a ka sɛbɛnni kɛ, kɛrɛnkɛrɛnnenya la, a maralen kɔfɛ walima a bilalen kɔfɛ funteni, nɔgɔ, buguri walima a minɛcogo nɔgɔ la.

Foli, Creasing ani Living-Hinge baarakɛcogo

Poliporopilini sɛbɛn finmanw bɛ se ka kurukuru ani ka segin-ka-bɔ, o b’a to u nafa ka bon foli, kɛsu, kaye datugulanw ani sɛbɛnnikɛlanw na minnu bɛ siri.

Foli kɛcogo bɛ bɔ resin hakɛ la, a bonya la, a suman sira fɛ, a kurulen jugumanba la, a dacogo la, a dacogo la, a funteni ani a ɲɛda cogoya.

• Aw bɛ masin sira ni a ɲɛfɛla sira sɛgɛsɛgɛ sani aw ka fɛn dɔ dilan min bɛ segin-ka-bɔ.

• Aw bɛ kurukuruni kɔlɔsilen kɛ walasa aw kana finimugu finman kojugu walima ka a tigɛ.

• Aw bɛ enki sɛbɛnnen kɔrɔbɔ a dacogo segin-segin kɔfɛ walasa ka a karilenw ni u bɔli lajɛ.

• Aw bɛ nɛnɛ-funteni foli dafa ni fɛnw bɛna mara walima ka taa ni u ye nɛnɛ waatiw la.

• Aw bɛ kulɛriw, minnu falen bɛ fɛnɲɛnamafagalanw na ani minnu tɛ tasuma bɔ, olu sɛgɛsɛgɛ danfara la barisa faralifɛnw bɛ se ka charnière baarakɛcogo Changer.

Tigɛ, Punching ani Joining Fɛɛrɛw

• Aw bɛ baara kɛ ni gilotini nɔgɔlenw ye, tigɛlan wulilenw, nɛgɛ-sariya-disi, punch walima muru.

• Aw bɛ sɛbɛnfura funteni ni baarakɛminɛnw bɔli kɔlɔsi walasa ka dɔ bɔ buruburuw ni dakun nɔgɔlenw na.

• Baara kɛ ni jatebɔminɛn bɛnnenw ye walasa ka foli-kɛsu ni foli dilan.

• Ultrasonic joining bɛ se ka jateminɛ ka ɲɛsin PP-to-PP yɔrɔw ma minnu bɛ bɛn ɲɔgɔn ma.

• Funteni datuguli ni funteni-plate welding bɛ funteni, tansiyɔn ani sigi waati kɔlɔsili de wajibiya.

• A ka c’a la, PP standard tɛ bɛn RF kɔrɔlen walima dielectrique soudure haute fréquence ma.

• A ka c’a la, nɔrɔli sirili bɛ kɛ ni surface treatment ye, primer walima nɔrɔlan min dilannen don plastikiw kama minnu fanga ka dɔgɔn.

• Masina fɛɛrɛw ye sɔgɔli, riveting, eyelets, clips ani snap-fit ​​assembly ye.

0,4mm Frosted PP Sheet ka baarakɛcogo

• Dosiyɛri foli: Biro foli sɛbɛnnenw, dosiyew bonyalen, sɛbɛnw portefeuille ani poroze foli.

• Kaye ɲɛw: Dakun minnu bɛ se ka baara kɛ kokura, tilayɔrɔw, index ɲɛw ani kɛnɛma sɛbɛnw masirilenw.

• Box minnu bɛ da ɲɔgɔn kan: Fɛn minnu bɛ kɛ ka ɲɛgɛnw, finiw, tulonkɛfɛnw, kadow, sanbaraw ani mɔgɔw ka fɛnw foroko.

• Piblisite sɛbɛnw: Laseli pannew, lasɔmini taamasiyɛnw, etajɛri taamasiyɛnw ani jiralan yɔrɔw.

• Jateblaw: Fini cogoyaw, sanbaraw ja, ja stencilw ani tigɛcogo gafe minnu bɛ se ka baara kɛ kokura.

• Foroko dontaw: Tilayɔrɔw, danfaralanw, lakanani fɛnw ani fɛn dilannenw dɛmɛnanw.

• Fotow: Albamu dakunw, kɔnɔna tilayɔrɔw ani lakanani ɲɛw.

• Yɔrɔw: Tabaliw minnu bɛ se ka baara kɛ kokura, minnu sɛbɛnnen don, minnu bɛ yeelen bɔ walima minnu ɲɛw ye ɲɛgɛn ye.

• Lanpanw: Panneau translucentes decoratives ni funteni ni yeelen jɛnsɛnni hakɛ sɛgɛsɛgɛlen ye.

• Ɛntɛrinɛti foroko : Aw bɛ tilayɔrɔw ni gaziw lamini ni kuran walima ESD hakɛ ye min sɛgɛsɛgɛra.

Dumuni-Kunnafoni PP sɛbɛn wajibiyalenw

Poliporopilini bɛ se ka kɛ dumuniw na ni resin tigitigiw, faralifɛnw, ɲɛgɛnw ani baarakɛminɛnw yamaruyara baara laɲininen na.

PP sɛbɛn min ɲɛ ye kulɛri ye, min sɛbɛnnen don, min bɛ taa ni a ye, min tɛ tasuma bɔ walima min kɔnɔfɛnw bɛ segin ka kɛ fɛn wɛrɛ ye, o man kan ka fɔ a yɛrɛma ko a bɛ dumuni ni ɲɔgɔn cɛ sariya sirataama.

Sannikɛlaw ka kan ka dumuni suguya, a sɔrɔcogo funteni, a ɲɔgɔn sɔrɔ waati, a facogo, a maracogo ani a taayɔrɔ-sɔgɔsɔgɔninjɛ sariyaw fɔ.

Dumuni ni ɲɔgɔn cɛ sɛbɛnw bɛ se ka kɛ resin sariya labatoli kunnafoniw ye, sariya labatoli jirali, jiginni sɛgɛsɛgɛli bɛɛ lajɛlen ani jiginni sɛgɛsɛgɛli kɛrɛnkɛrɛnnenw yɔrɔ minnu na a bɛ se ka kɛ.

Dumuni foroko sɛbɛnnenw fana bɛ enki, finimugu ani nɔrɔlan bɛnnenw de wajibiya, ni u ni dumuniw faralen don ɲɔgɔn kan cogo bɛnnen na yɔrɔ minnu na a mago bɛ u la.

Anti-Static, Conductive ani ESD PP Kalansow

Tasuma-fagalan PP sɛbɛn

Poliporopilini standard bɛ jeni, wa a man kan ka fɔ ko tasuma tɛ se ka don a la.

Tasuma-fagalan minnu bɛ se ka kɛ, olu bɛ se ka dilan baara kama minnu bɛ jeninida danfara ɲɛfɔlen de wajibiya.

Kunnafonidila ka kan ka sariya wajibiyalen, danfara, janya, kulɛri, misali ɲɛsincogo ani baara laban sigida ɲɛfɔ.

Sɛgɛsɛgɛli jaabi min bɛ sɔrɔ a janya walima a kulɛri kelen na, o man kan ka kɛ a yɛrɛma fura wɛrɛ la.

Fɛn minnu bɛ se ka tasuma sɔrɔ, olu tɛ tasuma hakɛ sigi taamasiyɛn dafalen, pake, kuran minɛn, mebɛri fɛn walima boon sigicogo.

UV-Stabilized PP Sheet min bɛ kɛ kɛnɛma

Poliporopilini sɛbɛn min bɛ kɛ ka kɛɲɛ ni sariya ye, o bɛ fɔ kosɛbɛ so kɔnɔ sɛbɛnni, pakew ani sɛbɛnnikɛlanw baara kama.

Ni tile yeelen bɛ mɛn sen na, o bɛ se ka kɛ sababu ye ka a fari faga, ka a kɛ kretiɛn ye, ka a sɔgɔsɔgɔ, ka a to a ka se ka a gosi ani ka a hakɛ caman Changer.

Kɛnɛma taamasiyɛnw, panɛriw ani finiw masirilenw bɛ furakɛlicogo kɛrɛnkɛrɛnnen dɔ de wajibiya min bɛ kɛ ni UV sabatili ye.

Kɛnɛyako wajibiyalenw ka kan ka kulɛri, waati cogoya, fɛnw jiracogo, baara waati, kulɛri caman cili dan, masinw-nafolo maracogo ani waati-sɛgɛsɛgɛli fɛɛrɛ jira.

Segin-ka-bɔnye ni sabatili

Poliporopilini ye fɛn ye min bɛ kɛ ni funteni ye, min bɛ se ka segin ka kɛ ni masin ye yɔrɔ la, yɔrɔ minnu na, fɛnw lajɛcogo, u tilacogo ani u baaracogo bɛnnenw bɛ sɔrɔ.

Fɛn dilannen man kan ka fɔ ko a bɛ se ka segin ka kɛ fɛn wɛrɛ ye diɲɛ bɛɛ kɔnɔ ka da a PP basigilen dɔrɔn kan.

Pigmentw, sɛbɛnnikɛlanw, labeliw, nɔrɔlanw, finiw, nɛgɛ sirilanw, tasumafagalanw ani fɛnw falenfalen minnu bɛ taa ni fɛnw ye, olu bɛ se ka nɔ bila fɛnw bɔli la ani u lasegincogo la.

PP sugandili minnu bɛ kɛ ni fɛn wɛrɛw ye, olu bɛ se ka jateminɛ ka kɛɲɛ ni kulɛri, kasa, nɔgɔ, masinw cogoya ani sariyaw ye.

PP min bɛ segin ka kɛ fɛn wɛrɛ ye, o baara kɛli ni dumuni ye, o bɛ balofɛnw de wajibiya minnu sɛgɛsɛgɛra u danma, fɛnw lasegincogo ani sɛbɛnw minnu bɛ tali kɛ o la.

Sɛgɛsɛgɛli minnu bɛ kɛ ka ɲɛsin jogoɲumanya kɔlɔsili ma

• PP resin walima fɛnɲɛnamafagalanw sɛgɛsɛgɛli.

• Kɛmɛsarada la, npogotiginin walima fɛn minnu bɛ segin ka kɛ fɛn wɛrɛw ye.

• A bonya ni a bonya muɲuni.

• Sɛbɛn janya, a bonya, a cɛmancɛ ani a kɛrɛ.

• Sheet flatness, bow, curl ani edge cogoya.

• Density walima sheet-weight sɛgɛsɛgɛli.

• Kulɛri ni kulu ni kuluw danfara.

• Gloss, haze, yeelen bɔli ani surface texture.

• Nɔgɔ nɛrɛma, jeli, bugun, sɔgɔsɔgɔninjɛ, jibɔ taamasiɲɛw ani nɔgɔ.

• Tensile fanga, janya ani modulu.

• A bɛ nɔ bila baarakɛcogo la funteni hakɛ wajibiyalen na.

• Funteni dɔgɔyali ani a hakɛ sabatili.

• Creasing, folding ani segin-ka-bɔn baarakɛcogo.

• Die-cutting, punching ani edge-quality sɛgɛsɛgɛliw.

• Corona-furakɛli hakɛ ani furakɛli marali.

• Printing adhesion, curing, abrasion ani scratch resistance.

• Adhesive-bonding ani peel-strength sɛgɛsɛgɛliw.

• Funteni-sigi walima ultrasonic-joint fanga yɔrɔ minnu na a mago bɛ a la.

• Surface ni volume resistance ka ɲɛsin ESD grades ma.

• Tasuma-fanga-sɛgɛsɛgɛli tasuma-fagalan hakɛw kan.

• UV-weathering sɛgɛsɛgɛliw kɛnɛma kalataw kama.

• Dumuni ni ɲɔgɔn cɛ jiginni sɛgɛsɛgɛliw yɔrɔ minnu na a bɛ se ka kɛ.

• Packing, pallet ani shipping sɛgɛsɛgɛli.

Custom Frosted PP Sheet Sugandiliw

• Poliporopilini sɛbɛn min bɛ kɛ ni 0,4mm ye min bɛ kɛ ni nɛnɛ ye.

• A janya bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye ka bɔ 0,25mm ɲɔgɔn na ka se 5mm ma.

• A bonya bɛ daminɛ milimɛtɛrɛ 300 ɲɔgɔn na ka se milimɛtɛrɛ 1700 ma.

• 915 × 1830mm, 1220 × 2440mm ani 1560 × 3050mm sɛbɛnw.

• A4, A3, 3 × 6ft, 4 × 8ft ani ladamu tigɛlenw.

• Natural translucent, frosted white, black ani custom kulɛriw.

• Pantone ni farikolo-sample kulɛri bɛnkan.

• Fɛn minnu bɛ kɛ fan kelen walima fan fila ye minnu bɛ kɛ ni nɛnɛ ye.

• Fine matte, coarse frosted ani custom embossed patterns.

• Korona furakɛli fan kelen walima fan fila.

• Sɛbɛnni yɔrɔw minnu dilannen don ni primer ye.

• UV offset, ekran, UV inkjet ani numérique-printing grades.

• Foli, die-cutting ani repetition-hinge grades.

• Anti-static, static-dissipative ani conductive grades (daɲɛ kɔrɔma-dafalen-falen-falen-falen-falen-falen-falen-falen-falen-falen-falen-falen-falen-falen-falen).

• UV-stabilized ani flame-retardant grades minnu bɛ sɛgɛsɛgɛli kɛ.

• Dumuni-sɔgɔsɔgɔninjɛ hakɛ minnu bɛ kɛ ka kɛɲɛ ni baarakɛcogo kɛrɛnkɛrɛnnenw ye.

• Labeliw, kartɔnw, palɛtiw ani cikan taamasiyɛnw minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

Kunnafoni minnu ka kan ka kɛ ka ɲɛsin Frosted PP Sheet Quote ma

• A ka kan ka kɛ a janya ni a muɲuni ye.

• Sɛbɛn hakɛ wajibiyalenw walima rollo bonya.

• Sɛbɛn jate wajibiyalen, roll janya walima komandi girinya.

• A ɲɛda cogoya, a ɲɛ jɛman, a nɛrɛma, a ɲɛ jɛlen don walima a ɲɛ tɛ ye.

• Pantone nimɔrɔ walima farikolo kulɛri misali.

• Fɛn kelen walima fan fila frosted surface.

• Matte fin, frost gros walima embossing customized.

• Sɛbɛnni kɛcogo ani enki kɛcogo.

• A wajibiyalen don koronawirisi-furakɛli fan fɛ ani surface-energie laɲini.

• Foli, creasing, die tigɛcogo, punching walima stitching kɛcogo.

• Funteni datuguli, ultrasonic joining walima adhesive-bonding wajibiyalen.

• So kɔnɔ walima kɛnɛma baarakɛcogo.

• Anti-static, conductive, UV walima tasuma-fagalan wajibiyalenw.

• Dumuni-sɔrɔ-cogo walima furakɛli-baarakɛcogo.

• Fɛɛrɛko ni sariya labatoli sɛbɛnw wajibiyalenw.

• Koman fɔlɔ hakɛ ani san ɲinini jateminɛlen.

• Packing, destination port ani delivery don wajibiyalen.

Aw ye aw ka Frosted PP sɛbɛn wajibiyalenw ci

Packing ani Delivery

Misaliw foroko : Sɛbɛn misɛnninw ni A4 misaliw bɛ se ka lakana ni PE bɔrɔw ye ani ka u pake cidenw ka kartɔn gɛlɛnw kɔnɔ.

Sɛbɛn minnu bɛ kɛ ka kɛɲɛ ni sariya ye: Sɛbɛnw bɛ se ka siri ni PE filimu walima kraft papier ye ani ka u lakana ni nɔngɔn gɛlɛnw ye.

Palɛtiw pakew : Palɛtiw bɛ se ka siri jiri, plywood walima fɛnɲɛnamafagalanw kan minnu tɛ sisi bɔ jamana wɛrɛw la ni sirilanw ni filimu ye min bɛ se ka wuli.

Surface protection: Lakanali interleaving walima surface film bɛ se ka baro kɛ fɛnw kan minnu sɛbɛnnen don, minnu bɛ kɛnɛya kosɛbɛ walima minnu bɛ se ka sɔgɔsɔgɔ.

Foroko minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye: Mɔgɔ kelen-kelen ka sɛbɛnw, logow, barɔdiw, kartɔn sɛbɛnni ani cikan taamasiyɛn minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu bɛ sɔrɔ.

Misaliw cicogo: Misaliw bɛ se ka ci DHL, FedEx, UPS, TNT, Aramex walima ciden wɛrɛ fɛ min bɛnna a kan.

Waati min bɛ kɛ : A ka c’a la, a dilanni bɛ kɛ tile 7-10 ɲɔgɔn na, a ɲɛfɔcogo, a misali, a sarali ani a pakew dafalen kɔfɛ.

Sɛbɛnw ni sariya labatoli sɛbɛnw

Sɛbɛn minnu bɛ sɔrɔ, olu bɛ se ka kɛ fɛɛrɛko kunnafoniw ye, lakana kunnafoniw sɛbɛnw, fɛnw dantigɛlenw kunnafoniw, resin jirali sɛbɛnw, dumuniko sɛbɛnw, farikolo-nafolo kunnafoniw ani jogoɲumanya seereyaw.

SGS ka kan ka ɲɛfɔ ka kɛɲɛ ni sɛgɛsɛgɛli tigitigi ye min kɛra, wa a man kan ka jira iko diɲɛ bɛɛ ka fɛn dilannenw seereyali.

RoHS bɛ tali kɛ fɛnw dantigɛlenw na kuran ni ɛntɛrinɛti minɛnw kɔnɔ, wa a tɛ dumuniko, furakɛli, UV, sɛbɛnni walima tasuma-fanga baarakɛcogo sigi sen kan a yɛrɛ ma.

REACH sɛbɛnw ka kan ka fɛn dantigɛlenw jira minnu bɛ tali kɛ o ko la, kandidaw tɔgɔ sɛbɛn don ani fura dilanni tigitigi.

Raporo bɛɛ ka kan ka lajɛ ka kɛɲɛ ni resin tigitigi ye, faralifɛnw, ɲɛgɛnw, u bonya, a dilanni yɔrɔ ani a kɛcogo laɲininen.

Mun na i bɛ HSQY sugandi ka kɛ i ka Frosted PP Sheet feerela ye?

• PP sɛbɛnw 0,4mm frosted ye sɛbɛnni, pakew ani sɛbɛnnikɛlanw ye.

• A janya bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye ka bɔ 0,25mm ɲɔgɔn na ka se 5mm ma.

• Fɛn minnu bɛ kɛ ni fɛnɲɛnamaw ye, nɛrɛmuguma, nɛrɛma, kulɛri jɛlen ani kulɛri opaque.

• Fɛn minnu bɛ kɛ ni nɛnɛ ye, olu bɛ kɛ fan kelen fɛ ani fan fila fɛ.

• Matte fin, frost gros ani embossing personnalisé.

• Faan kelen ni fan fila minnu furakɛra ni sɛbɛnnikɛlan ye.

• Offset, UV, écran ani numérique-printing sugandiliw.

• Foli, die-cutting, punch ani sɛbɛnnikɛlan hakɛw.

• Fura minnu bɛ kɛ ka fɛnw kɛlɛ, minnu bɛ se ka fɛnw ta, minnu bɛ UV sabati ani minnu tɛ tasuma bɔ.

• Misaliw minnu bɛ kɛ ka sɛbɛnni, foli, solda ani fɛn dilannenw sɛgɛsɛgɛli.

• Sɛbɛn hakɛ minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, u pakew ani u cicogo taamasiyɛnw.

• Duniya B2B dilanni ni a lase dɛmɛni.

Sani u ka fɛn caman dilan, HSQY b’a ɲini ka sɛbɛn sugandilen kɔrɔbɔ ni kiliyan ka tintin yɛrɛ ye, ni sɛbɛnnikɛlan ye, ni die tigɛminɛnw ye, ni folikɛminɛnw ye, ni nɛgɛw ye ani ni fɛn dilannenw jɔli ye.

Aw ye HSQY lajɛ walasa ka misaliw ni sɔngɔko dɔn

Ɲininkali minnu bɛ kɛ tuma caman na 0,4mm Frosted PP Sheet ko la

PP sɛbɛn min bɛ kɛ ni 0,4mm ye, o ye mun ye?

O ye poliporopilini sɛbɛn finman ye min ka gɛlɛn, a tilalen don, a janya tɔgɔ ye milimɛtɛrɛ 0,4 ye, a ɲɛda bɛ kɛ fɛn ye min bɛ wele ko matte walima texture.

Yala milimɛtɛrɛ 0,4 bɛ bɛn mikron 400 ma wa?

Awɔ. Poliporopilini sɛbɛn min janya ye milimɛtɛrɛ 0,4 ye, o bɛ bɛn mikron 400 ma.

Yala 0,4mm PP sɛbɛn bɛ se ka wuli walima ka gɛlɛn wa?

A ka c’a la, a bɛ Kɛ ‘yɔrɔ-yɔrɔ-ko ye. A bɛ se ka kuru ka foli kɛ k’a sɔrɔ a farikolo bɛrɛ bɛ foli, datugulanw, kɛsu ani tilayɔrɔw la.

Danfara jumɛn bɛ PP sɛbɛnfura frosted ni glossy cɛ?

Frosted PP bɛ ni textured, lower-glare surface ye, ka sɔrɔ glossy PP bɛ ni glossy surface ye ni reflection barikama ye ani ka yele yelen sanfɛ.

Yala PP sɛbɛnfura frosted bɛ kɛnɛya wa?

Natural frosted PP bɛ kɛ cogoya la min bɛ yeelen bɔ sanni a ka kɛ ɲɛ ye. Kɛnɛya bɛ bɔ resin, a janya, a ɲɛkisɛ ani a sanfɛla cogoya la.

Yala PP frosted bɛ yeelen jɛnsɛn wa?

O yɔrɔ min bɛ kɛ ni sɛbɛnni ye, o bɛ se ka yecogo jɛnsɛnnen dɔ dilan, nka baarakɛminɛn minnu bɛ ɲɛnayeli kɛcogo ɲɛfɔlen wajibiya, olu ka kan ka yeelen bɔli ni sisi ɲɛfɔ.

Yala PP sɛbɛn frosted bɛ se ka sɛbɛn wa?

Awɔ. A ka c’a la, PP min bɛ se ka sɛbɛnni kɛ, o ka kan ka korona furakɛli, tasuma furakɛli walima primer min bɛ bɛn o ma walasa ka tintiri nɔrɔli ɲɛ.

Baara bɛ se ka kɛ ni sɛbɛnni kɛcogo jumɛnw ye?

Sɛbɛn minnu bɛnnen don, olu bɛ se ka sɛbɛn ni UV offset ye, ka sɛbɛn ekran kan, ka sɛbɛn UV inkjet fɛ, ka sɛbɛn flexographie fɛ walima ka sɛbɛn nizɛrikan na kɔrɔbɔli kɔfɛ.

Korona furakɛli PP sɛbɛn ye mun ye?

O ye poliporopilini ye min sanfɛla furakɛra ni kuran ye walasa ka dɔ fara a sanfɛla fanga kan ani ka tintin, finimugu walima nɔrɔlen jisigicogo ɲɛ.

Yala corona furakɛli bɛ mɛn kudayi wa?

Ayi, furakɛli hakɛ bɛ se ka dɔgɔya waati tɛmɛnen kɔfɛ, o la, a ɲɛda ka kan ka sɛgɛsɛgɛ sani a ka sɛbɛn, a maralen kɔfɛ.

Yala PP sɛbɛn bɛ se ka da siɲɛ caman wa?

PP hakɛ bɛnnen bɛ se ka segin-ka-bɔnye baara di, nka resin, sheet direction, crease geometry ani additives ka kan ka sɛgɛsɛgɛ.

Yala 0,4mm PP sɛbɛn bɛ se ka die tigɛ wa?

Awɔ. A bɛ se ka tigɛ die, ka punch, ka slit ani ka giillotine tigɛ ni baarakɛminɛn bɛnnenw ni clearance ye.

Yala PP sɛbɛn bɛ se ka RF welded wa?

A ka c’a la, PP standard man ɲi RF welding kɔrɔlen na bawo a tɛ jaabi ɲuman di dielektriki funteni ma. Funteni sirili walima ultrasonic joining ka kan ka jateminɛ o nɔ na.

Yala poliporopilini sɛbɛn bɛ se ka welda ni ultrasonic ye wa?

PP ni PP yɔrɔ minnu bɛ bɛn ɲɔgɔn ma, olu bɛ se ka fara ɲɔgɔn kan ni ultrasonic ye, nka PP semi-crystalline bɛ jɛɲɔgɔnya kɛcogo bɛnnen ni masin sigicogo bɛnnen de wajibiya.

Yala 0,4mm PP sɛbɛn bɛnnen don dosiye foli ma wa?

Awɔ. A ka balansi bɛ se ka sɛgɛsɛgɛ, a ka gɛlɛn, a ka ji minɛ ani a ka se ka sɛbɛnni kɛ, o b’a to a bɛnnen don biro ni lakɔli foli caman ma.

Yala a bɛ se ka kɛ pakew kɛsu ye wa?

Awɔ. A bɛ se ka sɛbɛn, ka die tigɛ, ka kurukuru ani ka da ka kɛ foroko kɛsu nɔgɔmanw ye, a jɔcogo ni a datugucogo tiɲɛnen kɔfɛ.

Yala PP sɛbɛnfura frosted ji tɛ se ka don wa?

PP ji minɛni ka dɔgɔn kosɛbɛ wa a bɛ se ka ji minɛ cogo bɛnnen na, nka kɛsu walima foli dafalen tɛ ji bɔ a yɛrɛma barisa a dawolo ni a da bɛ se ka kɛ sababu ye ka ji don.

Yala poliporopilini bɛ se ka banakisɛw kɛlɛ wa?

PP bɛ asidi dilu caman, alkali ani saniyafɛn caman kɛlɛ, nka a bɛnkan bɛ bɔ furakisɛ tigitigi la, a hakɛ, a funteni ani a tali waati la.

Yala PP sɛbɛnfura dumuni bɛɛ farati tɛ wa?

Ayi, dumuni ni ɲɔgɔn cɛ bɛnnen bɛ bɔ resin tigitigi la, ɲɛgɛnw, faralifɛnw, finiw, tintiriw ani baara kɛcogo laɲininenw.

Yala SGS walima RoHS ka kunnafoni dɔ bɛ dumuni ni ɲɔgɔn cɛ sariya labatoli jira wa?

Raporo min bɛ dumuni ni ɲɔgɔn cɛ sariya, a dilanni, dumuni simulatiw ani baarakɛcogo cogoyaw ɲɛfɔ, o dɔrɔn de bɛ se ka o fɔlen in sinsin.

Yala PP min bɛ se ka kɛ dɔgɔtɔrɔso la, o bɛ sɔrɔ wa?

Furakɛcogo kɛrɛnkɛrɛnnenw hakɛ bɛ se ka jateminɛ ni resin, faralifɛnw, saniya, tugucogo, sterilize ani sariyaw wajibiyalenw fɔlen kɔfɛ.

Yala anti-statique PP sɛbɛn bɛ sɔrɔ wa?

Awɔ. Waati dɔɔnin walima banbali anti-static grades bɛ se ka labɛn ka kɛɲɛ ni resistance hakɛ wajibiyalen ye ani a kɛcogo ɲuman kuntaala.

Yala PP sɛbɛn min bɛ se ka ɲɛminɛ, o bɛ sɔrɔ wa?

PP grade conductive bɛ sɔrɔ ESD ni izini baarakɛcogo sugandilenw na, ka kɛɲɛ ni resistance, grounding, color ani masinko wajibiyalenw ye.

Yala poliporopilini sɛbɛnfura tɛ tasuma sɔrɔ wa?

Ayi, PP standard ye fɛn ye min bɛ se ka jeni. Tasuma-fagalan hakɛw bɛ furakɛlicogo kɛrɛnkɛrɛnnen ni sɛgɛsɛgɛli rapɔɔri de wajibiya ka kɛɲɛ ni u bonya ni u hakɛ ye min bɛ se ka kɛ.

Yala PP frosted standard bɛnnen don kɛnɛma wa?

Standard PP dabɔra kosɛbɛ so kɔnɔ baara kama. Kɛnɛyako kuntaalajanw bɛ UV-stabilized grade ani waati cogoya tiɲɛni de wajibiya.

Yala PP sɛbɛnfura frosted bɛ se ka segin ka kɛ fɛn wɛrɛ ye wa?

PP bɛ se ka kɛ fɛn ye min bɛ se ka segin ka kɛ yɔrɔ min na, yɔrɔ minnu na, fɛnw lajɛcogo ni u labɛncogo bɛnnenw bɛ yen. Enkiw, labeliw, finiw, fasaw ani fɛnw nɔrɔlen bɛ se ka nɔ bila bɛnkan na.

Kulɛri jumɛnw bɛ se ka kɛ ka kɛɲɛ ni mɔgɔw sago ye?

Kulɛri nafamaw, finmanw, nɛrɛmaw, minnu bɛ ye ani kulɛri minnu tɛ ye, olu bɛ se ka bɛn ni Pantone ka ɲɛfɔli ye walima ni farikolo taasibila ye min dabɔra.

Sɛbɛn hakɛ jumɛnw bɛ sɔrɔ?

Hakɛ minnu bɛ sɔrɔ tuma caman na, olu ye 915 × 1830mm, 1220 × 2440mm ani 1560 × 3050mm ye, ni A4, A3 ani tigɛ hakɛ minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu fana bɛ sɔrɔ.

Yala 2050 × 3050mm bɛ sɔrɔ wa?

O bonya min ka bon kosɛbɛ, o ka kan ka dafa bawo a sɔrɔli bɛ bɔ fɛn dilanni sira la, a bonya la, a sanfɛla la ani a bonya nafama yɛrɛ la.

Yala ne bɛ se ka misali dɔ sɔrɔ wa?

A4 misali minnu bɛ yen, kulɛriw misaliw ani sɛbɛnni misaliw bɛ se ka sɔrɔ. Kulɛri minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye ani baarakɛcogo kalataw bɛ se ka kɛ sababu ye ka u kɛcogo kɔrɔbɔ.

A dilanni ɲɛminɛ waati ye mun ye?

A ka c’a la, sɛnɛcogo jɔnjɔn bɛ tile 7-10 ɲɔgɔn de wajibiya, a ɲɛfɔcogo, a misali, a sarali ani a pakew dafalen kɔfɛ.

Kunnafoni jumɛnw de ka kan ka kɛ walasa ka quotation sɔrɔ?

Aw bɛ a janya, a bonya, a kulɛri, a sanfɛla, a sɛbɛnni furakɛli, a jiginni kɛcogo, a baarakɛcogo hakɛ, a hakɛ, a pakew ani a taayɔrɔ di.

Aw ye Frosted PP Sheet Quote sɔrɔ

HSQY Plastic Group ko la

HSQY Plastic Group bɛ PP sɛbɛnw di minnu bɛ kɛ ni nɛnɛ ye, poliporopilini sɛbɛn kulɛrilenw, PP sɛbɛn jɛlenw, PP sɛbɛnw minnu bɛ se ka funteni kɛlɛ, PET sɛbɛnw, PVC sɛbɛnw ani plastiki fɛnw minnu dilannen don ka kɛɲɛ ni mɔgɔw sago ye diɲɛ B2B kuntigiw ma.

HSQY bɛ sɛbɛnnikɛlaw dɛmɛ, sɛbɛnnikɛlanw dilannikɛlaw, pakew tigɛbagaw, taamasiyɛn dilannikɛlaw, thermoforming sosiyetew, fɛnw donbagaw ani u feerelaw ni fɛnw sugandili ye, kulɛriw bɛnni, misaliw, fɛn dilanni min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, sɛgɛsɛgɛli ani fɛnw bɔli jamana wɛrɛw la.

Quote ni Sample ɲini