HIPS PS fèy Roll for Thermoforming & Dumunifɛnw foroko

HIPS PS fèy Rollo ka ɲɛsin Thermoforming ma

PS fèy Roll Data Sheet telesarse

PS fèy Roll Test Rapport telesarse

Furakɛcogo: HIPS sɛbɛnfura min bɛ kɛ roll bɛ se ka kɛ ka thermoforming ni vacuum blister dilan walasa ka sanubɔlanw , minɛnw ani pakew dilannifɛn wɛrɛw dilan minnu cogoya ye.

Kɔnɔnafili baarakɛcogo : Sisan, sɛgɛn fanga min kofɔlen don, o ye 46–60 MPa ye ni Charpy bɔgɔbɔgɔli jaabi ye 2–5kJ/m².

Jateminɛ kɛcogo jan: A janya bɛ daminɛ milimɛtɛrɛ 0,2 na ka se milimɛtɛrɛ 2,0 ma, o b’a to fɛn caman tigɛlikɛlaw bɛ se ka jateminɛ suguya wɛrɛw sugandi pakew dilanni na minnu dilannen don ni funteni ye ani izini yɔrɔw.

Wide Roll Width: Bonya minnu bɛ sɔrɔ ka bɔ 300mm na ka se 1400mm ma, olu bɛ thermoforming minɛn suguya caman dɛmɛ ani ka fɛn dilannenw labɛn.

Kulɛriw ladamulen: Pantone ni RAL kulɛriw ani ladamucogo misaliw bɛ sɛbɛn i n’a fɔ u bɛ sɔrɔ poroze kɛrɛnkɛrɛnnenw ka ɲininiw kama.

Surface Options: Surface glossy ani matte bɛ sɔrɔ ka kɛɲɛ ni fɛn sugandilenw ka ɲɛfɔli ye.

ESD Sugandiliw : Sugandili minnu bɛ kɛ ka ɲɛsin fɛnw ma minnu bɛ se ka wuli, minnu bɛ se ka fɛnw minɛ ani minnu bɛ se ka fɛnw bɔ ɲɔgɔn na, olu bɛ fɔ baarakɛminɛnw kama i n’a fɔ ɛntɛrinɛti pakew. Kuran-nafolo wajibiyalenw dafa ni i bɛ quotation ɲini.

Dumuni foroko : sanubɔlanw , minɛnw ani foroko gɛlɛn wɛrɛw ka kɛɲɛ ni fɛn suguya sugandilen ye.

Elektɔriki foroko : A dabɔra sanubɔlanw ani pake lakananen, baarakɛcogo minnu bɛ anti-static walima ESD nafa wɛrɛw wajibiya.

Mobili yɔrɔw: HIPS sɛbɛnfura min bɛ kɛ bɛ se ka kɛ thermoformed walima fabricated mobili yɔrɔw baarakɛcogo sugandilenw kama.

Fɛn minnu bɛ kɛ ka mɔgɔw balo: Baarakɛcogo minnu kofɔlen don, olu ye tulonkɛfɛnw, nakɔbaarakɛminɛnw ani du kɔnɔfɛnw ye.

Laboratowari ka fɛnw : HIPS fana bɛ se ka baara kɛ ka kɛ laboratuwari ni izini fɛn sugandilenw ye.

Misali la, a foroko : Kuru misɛnninw bɛ se ka kɛ PP bɔrɔw kɔnɔ walima kɛsu kɔnɔ.

Kurukuruw foroko: Kurukuruw bɛ se ka siri PE filimu walima kraft papier la ka u pake kartɔnw kɔnɔ walima palɛtiw kan.

Palɛti foroko : Nin ɲɛ in bɛ kilo 500–2000 jira plywood palɛti kelen na.

Minɛnw doni : Sisan ɲɛ in bɛ tɔni 20 ɲɔgɔn fɔ i n’a fɔ doni hakɛ dantigɛlen min bɛ kɛ 20ft / 40ft minɛnw na.

Lasecogo sariyaw: EXW, FOB, CNF ani DDU.

Kurunw cicogo: Kɔgɔjida la kurunbokari, awiyɔn bolicogo, teliya la ani dugukolo kan bolifɛnw.

Waati min bɛ taa ɲɛ: A ci waati min sɛbɛnnen don, o ye tile 7–14 ye ka kɛɲɛ ni komandi hakɛ ye.

HSQY ka jogoɲumanya ni seereyaw kunnafoniw

HIPS PS sɛbɛnfura min bɛ kɛ rollo ye mun ye?

HIPS sɛbɛnfura min bɛ kɛ roll ye rollstock ye min dilannen don ni High Impact Polistyrene ye. A bɛ polisitiri ka gɛlɛya ni a baaracogo fara ɲɔgɔn kan ni a ka baarakɛcogo ɲuman ye, wa a ka teli ka baara kɛ ni thermoforming ni vacuum forming ye.

Fɛnɲɛnɛma jumɛnw bɛ sɔrɔ?

A janya min bɛ fɔ sisan, o ye 0,2mm fo 2,0mm ye. Aw bɛ jateminɛ wajibiyalen di ka fara aw ka foroko kɛcogo kan ani fɛn laban kan ni aw bɛ quotation ɲini.

Bonya jumɛnw bɛ sɔrɔ PS sɛbɛnfura min bɛ kɛ rollow la?

Rollo bonya hakɛ min kofɔlen don, o ye milimɛtɛrɛ 300 fo milimɛtɛrɛ 1400 ye. Aw bɛ bonya wajibiyalen dafa ka kɛɲɛ ni aw ka thermoforming minɛnw ni fɛn dilannenw labɛncogo ye.

Yala HIPS sɛbɛnfura min bɛ kɛ bɛnnen don thermoforming ma wa?

Awɔ. Baarakɛcogo minnu kofɔlen don sisan, olu ye thermoforming, vacuum blister forming ani die cutting ye.

Yala PS sɛbɛnfura min bɛ kɛ roll bɛ se ka kɛ dumuni foroko ye wa?

Dumuni foroko ye nin fura in kɛcogo sɛbɛnnen dɔ ye. Ni aw b’a fɛ ka dumunifɛnw foroko tilennenw kɛ, aw bɛ dumuniko sɛbɛnw ɲini minnu bɛ tali kɛ u la, ka ɲɛsin fɛnw hakɛ tigitigi ma ani u taayɔrɔ suguya ma sani u ka dilan.

Kulɛri jumɛnw bɛ sɔrɔ?

Fɛn dilannen kunnafoniw bɛ Pantone ni RAL kulɛriw ni ladamucogo jira. Kulɛri nɛrɛma, fin ani kulɛri wɛrɛw minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu bɛ se ka baro kɛ ni u bɛ komandi kɛ.

Yala glossy ni matte PS sɛbɛnfura min bɛ kɛ s bɛ sɔrɔ wa?

Awɔ. Yɔrɔ minnu bɛ manamana ani minnu ma ɲɛ, olu jatera i n’a fɔ sugandiliw minnu bɛ se ka sɔrɔ.

Yala aw bɛ anti-static walima conductive HIPS sɛbɛnfura min bɛ kɛ di wa ?

Sisan fɛn dilannenw bɛ anti-static, conductive ani static-dissipative suganditaw jira. Aw bɛ kuran walima dugukolo-yɔrɔ-ko-baarakɛcogo wajibiyalen fɔ ni aw bɛ jatebɔ ɲini ɛntɛrinɛti pakew la.

Rollo girinya ye mun ye?

Rollo-weight hakɛ min kofɔlen don, o ye kilo 50–200 ye, ni rollo girinya min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, o fana bɛ sɔrɔ.

Koman hakɛ fitinin ye mun ye?

Sisan, komandi hakɛ fitinin min bɛ sɛbɛn, o ye kilo 1000 ye.

Yala ne bɛ se ka misali dɔ ɲini wa?

Sisan fɛn dilannenw kunnafoniw bɛ misali fuw fɔ i n’a fɔ u bɛ sɔrɔ cogo min na, ni doni teliyalen bɛ sara sannikɛla fɛ. Aw bɛ se ka kuma HSQY fɛ walasa ka misali hakɛ n’a sɔrɔli dafa HIPS kalasi wajibiyalen na.

Jiginni waati min sɛbɛnnen don, o ye mun ye?

Lase waati min sɛbɛnnen don, o ye tile 7–14 ye ka kɛɲɛ ni komandi hakɛ ni a ɲɛfɔcogo ye.

Ne ka kan ka kunnafoni jumɛnw di walasa ka quotation sɔrɔ?

Aw bɛ HIPS hakɛ wajibiyalenw di, a janya, a bonya, a kurulen girinya, a kulɛri, a sanfɛla fini, a dilanni taabolo, a laban kɛcogo, a komandi hakɛ ani a wajibiyalen don sariya walima fɛɛrɛko sɛbɛn.