Biodegradable Thermoforming PLA Plastiki sɛbɛn min bɛ kɛ dumuniw foroko kɔnɔ

Nafolo	kunnafoni
Fɛn dilannen Tɔgɔ	Dumunifɛnw foroko minnu bɛ se ka tiɲɛ ni fɛnɲɛnamaw ye PLA Plastiki sɛbɛnw
Minɛ	PLA Plastiki ye
Jayan	Max 1300mm ye
A ka bon kosɛbɛ	0,15mm fo 3mm
Hakɛ	1,27 g/cm⊃3 ye;
Aplikasi minnu bɛ kɛ	Dumunifɛnw foroko

1. Biodegradable & Compostable

PLA plastiki sɛbɛnw dilannen don walasa ka fɛnɲɛnamaw tiɲɛ iziniw ka kɔmposi cogoyaw la. U bɛ tiɲɛ ka kɛ fɛnɲɛnamaw ye i n’a fɔ ji ni gazi ɲuman, o bɛ kɛ sababu ye ka plastiki tiɲɛni kuntaalajan dɔgɔya.

2. Kɛnɛyako ɲumanba

PLA sɛbɛnw bɛ jɛyaba di i n’a fɔ PET laadalafɛnw, o b’a to feerekɛlaw bɛ se ka dumuni pakew ye ka jɛya ani ka fɛnw jiracogo ɲɛ feerekɛyɔrɔw la.

3. Thermoforming baarakɛcogo ɲumanba

PLA plastiki sɛbɛnw bɛ se ka kɛ ni funteni ye nɔgɔya la ka kɛ cogoya suguya caman ye ani u foroko dilanni cogoya caman. U bɛnnen don ka sanubɔlanw, minɛnw ani shɔ foroko dilan dumuni kuraw kama.

4. Dumuni hakɛ lakanani walasa ka ɲɔgɔn sɔrɔ tilennen na

A bɛnnen don dumuniw foroko kɔnɔ minnu sumana, jisuma tasaw, ani cakɛda nɛnɛmaw la, ni sariya labatoli suganditaw bɛ bɛn FDA/EU ka dumuniko wajibiyalenw ma.

5. Dumuni-Grade & Safe

PLA sɛbɛnw minnu bɛ kɛ dumunifɛnw foroko kɔnɔ, olu tɛ baga ye, kasa tɛ u la, wa u farati tɛ ka maga dumuni na tigitigi, ka kɛɲɛ ni dumuni lakanani sariyaw ye minnu bɛ kɛ ka kɛɲɛ ni sariya ye.

6. A dilannen don ni Nafolo kura ye

PLA tɛ i n’a fɔ laadala plastiki, a dilannen don ni jiriw ye i n’a fɔ ɲɔmugu, o b’a to a bɛ kɛ pakew sugandili ye min bɛ sabati ani min tɛ sigida lakana.

Dumunifɛnw foroko

- Minfɛn nɛnɛmanw foroko : jisuma tasaw, minfɛn nɛnɛmanw, ani minfɛn nɛnɛma buteliw.

- Ɲɛjirali foroko minnu bɛ kɛ nɛnɛ na : patisri minnu bɛ kɛ nɛnɛ na, jiriden tigɛlenw, ani dumuni nɛnɛma minnu labɛnnen don ka dun.

Furakɛcogo Pakew

- Fura minnu bɛ kɛ ni cakɛda nɛnɛ ye : boloci bilayɔrɔw, nɛnɛ cakɛda dontaw, ani fura minnu bɛ kɛ ka funteni sɛgɛsɛgɛ, olu lakanani pakew. 

 

1. PLA bɛ kɛ cogo jumɛn na dumunifɛnw foroko kɔnɔ?

PLA (Acide polylactic) ye plastiki ye min bɛ se ka tiɲɛ, a bɛ bɔ nafolo kura la i n’a fɔ ɲɔmugu walima kɔɔri. A bɛ kɛ tuma caman na dumunikɛminɛnw dilanni na i n’a fɔ filimuw, sanubɔlanw, kalali minɛnw, tasaw ani dawolo.

---

2. Yala PLA foroko bɛ se ka tiɲɛ wa?

Awɔ. PLA bɛ fɛnɲɛnamaw tiɲɛ iziniw ka kɔmposi sigidaw la, funteni, nɔgɔ ani fɛnɲɛnama misɛnninw b’a tiɲɛni nɔgɔya yɔrɔ minnu na. O kɛcogo in b’a to PLA bɛ kɛ fɛɛrɛ ye min tɛ sigida lakana ni i y’a suma ni petoroli plastiki kɔrɔlenw ye.

---

3. Yala PLA bɛnnen don ka maga dumuni na tigitigi wa?

Awɔ. PLA fɛn minnu bɛ kɛ dumunifɛnw foroko kɔnɔ, olu ye dumuni suguya ye, u tɛ baga ye, wa kasa tɛ u la. U bɛ dumuni lakanani sariyaw labato, wa u bɛnnen don fɛn kuraw pakew ma i n’a fɔ jiridenw, nakɔfɛnw, salatiw ani tobilikɛminɛnw.

---

4. Yala PLA dumunikɛminɛnw bɛ se ka kɛ mikro walima foro kɔnɔ wa?

PLA foroko jɔnjɔnw bɛ funteni kunbɛncogo danmadɔ sɔrɔ, wa a ka c’a la, a man ɲi ka kɛ mikro walima foro kɔnɔ. A dabɔra kosɛbɛ dumuni nɛnɛ walima so funteni na.

---

5. PLA nafa ye mun ye ni i y’a suma ni laadala plastiki foroko ye?

PLA pakew dilannen don ni nafolo kura ye, a bɛ kɛnɛyako ɲuman di, wa a bɛ dɔ bɔ a jigi da plastiki kan min sinsinnen bɛ fɛnɲɛnamafagalanw kan. A bɛ dɛmɛ fana don pakew dilanni cɛsiriw la minnu bɛ sabati ani ka tɔnw dɛmɛ u ka sigida sariyaw labato.