HSQY 0.4mm Nsukyenee PP krataa Polypropylene Plastik krataa

0.4mm Frosted PP krataa a wɔde tintim ne nea wɔde kyekyere nneɛma

HSQY yɛ 0.4mm frosted polypropylene krataa so nsɛm s ma nnaka a wɔatintim a wɔde kyekyere nneɛma, fael folda, nhoma a wɔde kyerɛw nsɛm, nkrataa sika kotoku, dawurubɔ panel, nsusuwso, mpaapaemu, placemats ne plastic nneɛma afoforo a wɔasakra.

krataa so nsɛm a wɔakyerɛ no wɔ din mu duru a ɛyɛ 0.4mm ne matte anaa frosted surface a ɛtew glare so, ɛde nsateaa nkyerɛwee sie na ɛma aniwa a ɛho tew.

Kɔla ahorow a ɛwɔ hɔ no bi ne abɔde mu translucent, frosted fitaa, tuntum, transparent kɔla, opaque kɔla ne customized Pantone anaa sample-matched shades.

Standard PP wɔ ahoɔden a ɛba fam koraa wɔ soro. Wobetumi de nkratafa a wɔahyɛ da ayɛ sɛ wɔde tintim offset, UV tintim, screen tintim, coating anaa adhesive bonding bɛma denam ɔfã biako anaa afã abien corona treatment anaasɛ application-specific primer.

0.4mm krataa so nsɛm a wɔada no adi no ma kari pɛ a ɛyɛ mmerɛw, ɛyɛ den ne emu duru a ɛba fam ma folding, creasing, die cutting, punching, stitching ne stationery anaa packaging converting akwan afoforo.

Polypropylene krataa so nsɛm s a wɔayɛ no sɛnea wɔpɛ no wɔ hɔ fi bɛyɛ 0.25mm kosi 5mm. Trɛw, ɔfasu, kɔla, petee ne sɛnea wɔyɛ no a ɛwɔ hɔ no gyina ne kɛse ne sɛnea wɔayɛ no a wɔapaw so.

Nneɛma a wobetumi apaw bi ne PP krataa so nsɛm s.

Saa agyapadeɛ a wɔpaw yi, wɔmfa nka ho wɔ standard frosted PP krataa so nsɛm mu. Ɛsɛ sɛ wosi nnuru a wɔde yɛ no pɛpɛɛpɛ, ɔkwan a wɔfa so sɔ hwɛ, ne kɛse, kɔla ne sɛnea wɔpɛ sɛ wɔde bedi dwuma no so dua ansa na wɔayɛ.

Hwehwɛ nea edi mũ no mu HSQY polypropylene krataa so nsɛm kwan ne nea ɛka ho PP krataa so nsɛm nneɛma a wɔakyerɛw so.

Bisa Frosted PP krataa Boɔ a Wɔbɔ    Bisa Nhwɛsode a Wɔde Ntintim

Frosted Polypropylene Krataa Mfonini ahorow

Frosted PP krataa Video a wɔde ahyɛ mu

Hwɛ video a ɛwɔ aseɛ ha no na hwɛ HSQY polypropylene krataa so nsɛm s, surfaces a ɛwɔ hɔ ne converting applications.

Dɛn Ne 0.4mm Frosted PP krataa ?

0.4mm frosted PP krataa so nsɛm yɛ polypropylene a ɛyɛ tratraa, fã bi a ɛyɛ den krataa so nsɛm a ne kɛse yɛ microns 400 wɔ din mu na ne soro yɛ matte anaa textured.

Nneɛma a ɛwɔ soro no bɔ hann a ɛda adi no pete na ɛma ɛyɛ mmerɛw a wɔde hwɛ ade sen PP soro a ɛhyerɛn kɛse.

Ɛgyina pigment dodow ne krataa so nsɛm adansi so, ade no betumi ayɛ translucent, transparent kɔla anaasɛ opaque koraa.

Wɔ 0.4mm, PP taa yɛ mmerɛw sɛnea ɛsɛ ma creasing ne folding bere a kura stiffness a ɛdɔɔso ma folda, adaka panels, dividers, covers ne templates.

Polypropylene wɔ density a ɛba fam, nsuo a ɛtwetwe sua na ɛko tia dilute acids pii, alkalis ne nnuru a wɔde tew ho. Ɛsɛ sɛ wɔda so ara si nnuru a ɛne ne ho hyia no so dua ma nnuru, dodow, ɔhyew ne bere a wɔde di dwuma pɛpɛɛpɛ.

Thin PP krataa vs. Nnwumayɛbea PP Boayikuw

Adeɛ a wɔada no adi no yɛ PP a ɛyɛ teateaa a ɛyɛ den krataa so nsɛm na ɛnsɛ sɛ wɔde frafra corrugated polypropylene board anaa mfiridwuma PP-H mprɛte a ɛyɛ den.

0.4mm Frosted PP krataa Nkyerɛkyerɛmu

Ɛsɛ sɛ nkyerɛkyerɛmu a etwa to no kyerɛ PP resin anaa aduru pɔtee, nea wɔfrɛ no mu duru, abodwokyɛre, nsusuwii, kɔla, ɔfasu nsusuwso, ayaresa fã, tintim kwan ne nneɛma a wɔawie a wɔhwehwɛ.

0.4mm PP krataa Ne kɛse ne sɛnea wɔde di dwuma

Milimita biako yɛ microns 1000. Enti polypropylene krataa so nsɛm a ne kɛse yɛ 0.4mm no mu duru yɛ microns 400.

Frosted Surface Nneɛma a Wɔpaw

Ɛsɛ sɛ wɔsusu hann-nkɔ ne ahum boɔ berɛ a wɔahyɛ da krataa so nsɛm no ama kanea, kanea nnaka, mfoninitwa akyi anaa optical diffusion.

Corona-Ayareɛ PP krataa ma Ntintim

Polypropylene a wɔansiesie no wɔ ahoɔden a ɛba fam koraa wɔ soro, a ebetumi atew ink, ade a wɔde kata so ne ade a wɔde bata ho no so.

Corona ayaresa sesa PP no ani na ebetumi ama nsuo ne adhesion atu mpɔn ama tintim, akata ne bonding.

Ɛsɛ sɛ adetɔfo kyerɛ sɛ ebia ɔfã biako anaa ɔfã abien no nyinaa hia ayaresa na wɔkyerɛ ɔfã a wotintim wɔ nneɛma a wɔde kyekyere nneɛma ho no so.

Corona ayaresa betumi akɔ fam bere a wɔde sie no. Ɛsɛ sɛ wɔhwɛ ahoɔden a ɛwɔ soro ansa na wɔatintim, titiriw bere a wɔde asie bere tenten anaasɛ wɔde ahyɛ ɔhyew, nsu, mfutuma anaa efĩ ho dwuma akyi.

Folding, Creasing ne Living-Hinge Adwumayɛ

Wobetumi abɔ polypropylene krataa so nsɛm s a ɛyɛ tratraa no mu na wɔabobɔw no mpɛn pii, na ɛma ɛyɛ nea mfaso wɔ so ma folda, nnaka, nhoma a wɔde kyerɛw nsɛm so ne nneɛma a wɔde kyerɛw nsɛm a wɔde hinge ayɛ.

Fold adwumayɛ gyina resin grade, thickness, grain akwankyerɛ, crease bun, crease trɛw, folding radius, ɔhyew ne pigmentation.

• Si afiri no kwankyerɛ ne transverse kwankyerɛ no so dua ansa na woayɛ hinge a wɔayɛ no mpɛn pii.

• Fa controlled creasing di dwuma na woakwati sɛ wobɛtete dodo anaasɛ wobɛtwa krataa so nsɛm no mu.

• Sɔ ink a wɔatintim no hwɛ bere a woabobɔw mpɛn pii akyi de ahwɛ sɛ mpaapaemu ne delamination.

• Di awɔw mu hyew a wɔbobɔw bere a wɔde nneɛma besie anaasɛ wɔde bɛkɔ wɔ awɔw bere mu tebea horow mu no yɛ nokware.

• Sɔ kɔla, mineral-ahyɛ mu ma ne ogya-retardent grades hwɛ wɔ ɔkwan soronko so efisɛ additives betumi asesa hinge adwumayɛ.

Akwan a Wɔfa so Twitwa, Bɔ akuturuku ne Nea Wɔde Bom

• Fa guillotines a ano yɛ nnam, rotary cutters, steel-rule dies, punches anaa nnade di dwuma.

• Hwɛ krataa so nsɛm ɔhyew ne adwinnade a ɛda adi so na ama burrs ne anoano a wɔakyinkyim no so atew.

• Fa nkontabuo nnwinnadeɛ a ɛfata di dwuma ma folding-box ne folda production.

• Ultrasonic nkabom betumi asusuw ho ama PP-to-PP afã horow a ɛne no hyia.

• Ɔhyew a wɔde hyɛ mu ne hot-plate welding hwehwɛ sɛ wɔhwɛ ɔhyew, nhyɛso ne bere a wɔde tra hɔ so.

• Standard PP no taa mfata mma amanne kwan so RF anaasɛ high-frequency dielectric welding.

• Mpɛn pii no, adhesive bonding hwehwɛ sɛ wɔde aduru a ɛwɔ soro, primer anaasɛ adhesive a wɔayɛ ama plastic a ahoɔden kakraa bi na ɛwɔ soro.

• Mfiri akwan bi ne stitching, riveting, eyelets, clips ne snap-fit ​​assembly.

Nneɛma a wɔde di dwuma wɔ 0.4mm Frosted PP krataa mu.

• Fael folda: Ɔfese folda a wɔatintim, fael a wɔatrɛw mu, nkrataa sika kotoku ne project folda.

• Nwoma a wɔde kyerɛw nsɛm: Nkatasoɔ a wɔtumi de di dwuma bio, mpaepaemu, index nkratafa ne abɔnten so asiesie krataa so nsɛm s.

• Nnaka a wɔbobɔw: Nneɛma a wɔde kyekyere nneɛma a wɔde yɛ ahosiesie, ntade, agode, akyɛde, mpaboa ne nneɛma a wɔde di dwuma.

• Dawurubɔ krataa so nsɛm s: Nsɛm a wɔde hyɛ nkurɔfo nkuran, kɔkɔbɔ nsɛnkyerɛnne, shelf nsɛnkyerɛnne ne nneɛma a wɔde kyerɛ.

• Nsusuwii: Ntade nsusuwso, mpaboa nsusuwso, mfoninitwa stencil ne akwankyerɛ a wɔde twa nneɛma a wotumi san de di dwuma.

• Nneɛma a wɔde hyɛ mu: Nkyekyɛmu, mpaapaemu, nneɛma a ɛbɔ ho ban ne nneɛma a wɔde boa.

• Mfonini album: Album nkataso, emu mpaapaemu ne nkratafa a ɛbɔ ho ban.

• Placemats: Table mats a wɔatintim, ɛyɛ hann anaa kɔla ahorow a wotumi de di dwuma bio.

• Kanea a Wɔde Siesie: Wɔde ɔhyew ne hann a ɛtrɛw a wɔagye atom a wɔde siesie nneɛma a ɛyɛ hann a ɛyɛ hann.

• Ɛlektrɔnik nneɛma a wɔde kyekyere nneɛma: Wɔde anyinam ahoɔden anaa ESD grade a wɔagye atom a wɔde siw mpaapaemu ne gasket ahorow ano.

Aduan-Nkitahodi PP krataa Ahwehwɛde ahorow

Wobetumi de polypropylene adi dwuma wɔ aduan a wɔde di dwuma mu bere a wɔama ho kwan sɛ wɔmfa resin, nneɛma a wɔde ka ho, nneɛma a wɔde yɛ nneɛma ne nneɛma a wɔde yɛ adwuma pɛpɛɛpɛ no nni dwuma wɔ nea wɔpɛ sɛ wɔde di dwuma no mu.

Ɛnsɛ sɛ wɔka PP krataa so nsɛm a ɛwɔ kɔla a wɔahyɛ da ayɛ, a wɔatintim, ɛde nsu fa mu, ɛmma ogya ntumi nhyew anaasɛ nea wɔasan de adi dwuma wom no ho asɛm ara kwa sɛ ɛne aduan a wɔde di nkitaho no hyia.

Ɛsɛ sɛ adetɔfo kyerɛ aduan ko, ɔhyew a wɔde di nkitaho, bere tenten a wɔde di nkitaho, ɔkwan a wɔfa so hyɛ mu ma, tebea a wɔde sie ne baabi a wɔrekɔ-gua ho mmara.

Aduan a wɔde di nkitaho ho nkrataa betumi ayɛ nsɛm a ɛfa resin a wodi so ho, mpaemuka a ɛkyerɛ sɛ wɔadi mmara so, atutra ho sɔhwɛ nyinaa ne atutra ho sɔhwɛ pɔtee wɔ baabi a ɛfata.

Aduan a wɔde kyekyere nneɛma a wɔatintim nso hwehwɛ sɛ wɔde ink, ade a wɔde kata so ne nneɛma a wɔde nkata so a ɛfata, a wɔayiyi afi aduan ho sɛnea ɛfata wɔ baabi a ɛho hia.

Anti-Static, Conductive ne ESD PP Abasobɔde ahorow

Ogya a Ɛmma Ogya Ntumi Nhyew PP krataa

Polypropylene a wɔtaa de di dwuma no yɛ nea ogya hyew na ɛnsɛ sɛ wɔka ho asɛm sɛ ogya ntumi nhyew.

Wobetumi ayɛ nnuru a ogya ntumi nhyew ama dwumadie a ɛhwehwɛ sɛ wɔkyekyɛ ɔhyew mu nkyekyɛmu a wɔakyerɛkyerɛ mu.

Ɛsɛ sɛ adetɔfoɔ no kyerɛ gyinapɛn a wɔhwehwɛ, nkyekyɛmu, ne kɛseɛ, kɔla, nhwɛsoɔ kwankyerɛ ne tebea a wɔde bedi dwuma awieeɛ.

Ɛnsɛ sɛ wɔde sɔhwɛ mu aba a ɛfa ne kɛse anaa kɔla biako ho no di dwuma ara kwa wɔ aduru foforo mu.

Nea efi ogya a ɛwɔ nneɛma mu ba no nkyerɛ ogya dodow a ɛwɔ sɛnkyerɛnne a edi mũ, ade a wɔde ahyɛ mu, anyinam ahoɔden mfiri, dan mu nneɛma anaa ɔdan nhyehyɛe mu.

UV-Stabilized PP krataa a wɔde di dwuma wɔ abɔnten

Standard polypropylene krataa so nsɛm na wɔkamfo kyerɛ titiriw ma dan mu tintim, nneɛma a wɔde kyekyere nneɛma ne nkrataa a wɔde kyerɛw nneɛma.

Owia hann a ɛbɛkyɛ no betumi ama ayɛ mmerɛw, ayɛ chalk, ayɛ mmerɛw, ahwere sɛnea ɛko tia nsunsuanso ne ne kɛse nsakrae.

Abɔnten nsɛnkyerɛnne, panels ne decorative krataa so nsɛm s hwehwɛ sɛ wɔde UV-stabilized formulation a ɛfa dwumadie pɔtee bi ho.

Ɛsɛ sɛ abɔnten so ahwehwɛde ahorow kyerɛ kɔla, wim tebea, akwankyerɛ a wɔde da no adi, ɔsom bere, kɔla-sesa anohyeto, mfiri-agyapade a wɔkora so ne wim tebea-sɔhwɛ kwan.

Nneɛma a Wɔsan De Di Dwuma ne Nneɛma a Ɛkɔ So Daa

Polypropylene yɛ ade a wɔde yɛ thermoplastic a wobetumi de mfiri asan de adi dwuma wɔ baabi a nhyehyɛe a ɛfata a wɔde boaboa nneɛma ano, hyehyɛ ne nea wɔde yɛ adwuma wɔ hɔ.

Ɛnsɛ sɛ wɔka ade a wɔawie ho asɛm sɛ wotumi san de di dwuma wɔ amansan nyinaa mu a egyina ne PP nnyinaso ade nkutoo so.

Pigments, printing ink, labels, adhesives, coatings, dade a wɔde kyekyere, ogyaframa a ɛmma ogya ntumi nhyew ne conductive fillers betumi aka sɛnea wɔhyehyɛ ne nea wɔsan de di dwuma bio.

Wobetumi asusuw PP a wɔasan de adi dwuma a wɔpaw no ho sɛnea kɔla, hua, efĩ, mfiri ahorow ne mmara mu ahwehwɛde ahorow te.

PP a wɔasan de adi dwuma a wɔde di dwuma wɔ aduane mu no hwehwɛ sɛ wɔde aduane a wɔde ma a wɔagye atom wɔ ɔkwan soronko so, akwan a wɔfa so de di dwuma bio ne nkrataa a ɛfata.

Sɔhwɛ ahorow a Wɔkamfo kyerɛ sɛ Wɔde Hwɛ Nneɛma a Ɛyɛ Paara So

• PP resin anaasɛ aduru a wɔde yɛ nhwehwɛmu.

• Virgin anaa recycled-content ɔha biara mu nkyem.

• Thickness ne thickness a wotumi gyina ano.

• Krataa no tenten, ne tɛtrɛtɛ, ne diagonal ne ne square.

• Sheet flatness, bow, curl ne ano tebea.

• Density anaa krataa so nsɛm -mu duru ho adansedie.

• Kɔla ne batch-to-batch kɔla nsonsonoe.

• Gloss, haze, hann a ɛkɔ ne soro texture.

• Nsonsonoe tuntum, gel, ahurututu, nsensanee, nsu a ɛsen ne efĩ.

• Tensile ahoɔden, elongation ne modulus.

• Nkɛntɛnso adwumayɛ wɔ ɔhyew a wɔhwehwɛ no mu.

• Ɔhyew a ɛtwetwe ne dimensional stability.

• Creasing, folding ne mpɛn pii-hinge adwumayɛ.

• Die-cutting, punching ne edge-quality sɔhwɛ ahorow.

• Corona-ayaresa dodow ne ayaresa a wɔkora so.

• Printing adhesion, ayaresa, abrasion ne scratch a ɛko tia.

• Adhesive-bonding ne peel-ahoɔden ho sɔhwɛ ahorow.

• Heat-seal anaa ultrasonic-joint ahoɔden wɔ baabi a ɛho hia.

• Surface ne volume resistance ma ESD grades.

• Ogya a ɛtumi hyew ho sɔhwɛ a wɔde hwehwɛ ogya a ɛmma ogya ntumi nhyew.

• UV-weathering sɔhwɛ ahorow a wɔde hwehwɛ abɔnten so abasobɔde ahorow.

• Aduan a ɛne wɔn ho wɔn ho di nkitaho ho sɔhwɛ ahorow wɔ baabi a ɛfata.

• Packing, pallet ne po so hyɛn nhwehwɛmu.

Amanneɛbɔ Frosted PP krataa Nneɛma a Wɔpaw

• Wɔada no adi sɛ 0.4mm frosted polypropylene krataa so nsɛm .

• Customized thicknesses fi bɛyɛ 0.25mm kosi 5mm.

• Ntrɛwmu fi bɛyɛ 300mm kosi 1700mm.

• 915 × 1830mm, 1220 × 2440mm ne 1560 × 3050mm krataa so nsɛm s.

• A4, A3, 3 × 6ft, 4 × 8ft ne amanne kwan so twa asinasin.

• Abɔde mu translucent, frosted fitaa, tuntum ne amanne kɔla ahorow.

• Pantone ne honam fam-nhwɛsode kɔla a ɛne ne ho hyia.

• Afã biako anaa ɔfã abien frosted surfaces.

• Fine matte, coarse frosted ne amanne embossed nsusuwii.

• Ɔfã biako anaa ɔfã abien corona ayaresa.

• Nneɛma a wɔde tintim nhoma a wɔde primer adura ho.

• UV offset, screen, UV inkjet ne dijitaal-tintim nkyerɛwde ahorow.

• Folding, die-twitwa ne mpɛn pii-hinge grades.

• Anti-static, static-dissipative ne conductive nkyerɛwde.

• UV-stabilized ne ogya-retardent grades a wobetumi asɔ ahwɛ.

• Aduan a wɔde di nkitaho ho abasobɔde ahorow a ɛfa dwumadie pɔtee bi ho.

• Customized labels, cartons, pallets ne nneɛma a wɔde mena agyiraehyɛde.

Nsɛm a Ɛho Hia ma Frosted PP krataa Quote

• Nea ɛhwehwɛ sɛ ɛyɛ kɛse na ɛyɛ nea wotumi gyina ano.

• krataa so nsɛm nsusuwii anaa roll trɛw a wɔhwehwɛ.

• krataa so nsɛm kan, roll tenten anaa order mu duru a ɛhwehwɛ.

• Abɔde, fitaa, tuntum, kɔla a ɛda adi anaasɛ kɔla a ɛnyɛ hann a ɛte sɛ nea ɛte.

• Pantone nɔma anaa honam fam kɔla nhwɛsode.

• Frosted surface a ɛwɔ ɔfã biako anaa abien.

• Fine matte, coarse frost anaasɛ embossing a wɔayɛ no sɛnea wɔpɛ.

• Ɔkwan a wɔfa so tintim nhoma ne ink nhyehyɛe.

• Ahwehwɛde korona-ayaresa afã ne soro-ahoɔden botae.

• Folding, creasing, die twa, punching anaa stitching nhyehyɛe.

• Ɔhyew nsɔano, ultrasonic nkabom anaasɛ adhesive-bonding ahwehwɛde.

• Wɔde di dwuma wɔ dan mu anaa abɔnten.

• Anti-static, conductive, UV anaa ogya-retartant ahwehwɛde ahorow.

• Aduan a wɔde di dwuma anaa aduruyɛ mu a wɔde di dwuma tebea horow.

• Mfiridwuma ne mmara sodi ho nkrataa a wɔhwehwɛ.

• Mfiase no dodow a wɔkra ne afe afe ahwehwɛde a wɔasusuw ho.

• Packing, destination port ne da a wɔhwehwɛ sɛ wɔde bɛkɔ.

Send Wo Frosted PP krataa Ahwehwɛdeɛ

Nneɛma a Wɔde Gu Mu ne Nea Wɔde Kɔma

Nhwɛsoɔ a wɔde gu mu: Wobetumi de PE nkotokuo abɔ krataa so nsɛm s ne A4 nhwɛsoɔ nketewa ho ban na wɔde ahyɛ nnaka a ɛyɛ den mu.

Standard krataa so nsɛm packing: Wobetumi de PE film anaa kraft krataa abɔ nkratafa na wɔde ntwea a ɛyɛ den abɔ ho ban.

Pallet packing: Wobetumi de straps ne stretch film abɔ nnua, plywood anaa fumigation-free export pallets so.

Fam ahobammɔ: Wobetumi aka ahobammɔ interleaving anaa surface film ho asɛm ama nneɛma a wɔatintim, a ɛhyerɛn kɛse anaasɛ ɛyɛ mmerɛw sɛ wɔbɛtwetwe.

Nneɛma a wɔde kyekyere nneɛma a wɔahyɛ da ayɛ: Wɔde ankorankoro nkyerɛwde, ahyɛnsode ahorow, barcode ahorow, kartɔn tintim ne agyiraehyɛde ahorow a wɔayɛ ama nneɛma a wɔde mena no wɔ hɔ.

Nhwɛsode a wɔde mena: Wobetumi de nhwɛsode ahorow afa DHL, FedEx, U PS , TNT, Aramex anaa obi foforo a wɔapene so de amena.

Lead time: Standard production mpɛn pii no hwehwɛ bɛyɛ nnafua 7-10 akyi specification, nhwɛsode, akatua ne packing no si so dua.

Adansedi nkrataa ne Nwoma a Wɔde Di Dwuma

Nwoma a ɛwɔ hɔ no betumi ayɛ mfiridwuma ho nsɛm krataa so nsɛm s, ahobanbɔ ho nsɛm krataa so nsɛm s, nneɛma a wɔabara ho amanneɛbɔ, resin mpaemuka, aduane ho nkrataa, honam fam agyapadeɛ ho amanneɛbɔ ne adansedie a ɛfa nneɛma pa ho.

Ɛsɛ sɛ wɔkyerɛkyerɛ SGS mu sɛnea sɔhwɛ pɔtee a wɔayɛ no te na ɛnsɛ sɛ wɔde ma sɛ amansan nyinaa aduru ho adansedi krataa.

RoHS fa nneɛma a wɔabara wɔ anyinam ahoɔden ne ɛlɛtrɔnik mfiri mu ho na ɛnyɛ nea ɛde ne ho nhyɛ aduan a wɔde di nkitaho, aduruyɛ, UV, tintim anaa ogya a ɛtumi hyew ho adwumayɛ.

Ɛsɛ sɛ REACH nkrataa kyerɛ nneɛma a wɔabara a ɛfa ho, da a wɔakyerɛw wɔn a wɔpɛ sɛ wɔpaw wɔn ne sɛnea wɔyɛɛ aduru no pɛpɛɛpɛ.

Ɛsɛ sɛ wɔhwɛ amanneɛbɔ biara mu hwɛ sɛnea resin, nneɛma a wɔde ka ho, nneɛma a wɔde yɛ aduru, ne kɛse, beae a wɔyɛ ne nea wɔpɛ sɛ wɔde bedi dwuma pɛpɛɛpɛ.

Dɛn Nti na Wopaw HSQY sɛ Wo Frosted PP krataa Supplier?

• 0.4mm frosted PP krataa so nsɛm s a wɔde tintim, wɔde kyekyere ne nneɛma a wɔde kyerɛw nsɛm.

• Customized thicknesses fi bɛyɛ 0.25mm kosi 5mm.

• Abɔde, fitaa, tuntum, kɔla a ɛyɛ mmerɛw ne kɔla a ɛnyɛ hann.

• Afã biako ne ɔfã abien frosted surfaces.

• Fine matte, coarse frost ne embossing a wɔayɛ no sɛnea wɔpɛ.

• Ɔfã biako ne ɔfã abien a wɔde corona ayɛ nhoma tintim mu abasobɔde ahorow.

• Offset, UV, screen ne dijitaal-tintim akwan horow.

• Folding, die-cutting, punching ne nkyerɛwee grades.

• Anti-static, conductive, UV-gyinabea ne ogya-retardent nnuru.

• Nhwɛsode a wɔde tintim, folding, welding ne finished-product sɔhwɛ.

• krataa so nsɛm akɛseɛ, packing ne shipping agyiraeɛhyɛdeɛ a wɔahyɛ da ayɛ.

• Amanaman ntam B2B a wɔyɛ ne nea wɔde ma ho mmoa.

Ansa na wɔbɛyɛ nneɛma pii no, HSQY kamfo kyerɛ sɛ wɔmfa adetɔfo no ink ankasa, afiri a wɔde tintim nhoma, nnwinnade a wɔde twa die, nnwinnade a wɔbobɔw, nneɛma a wɔde nkata so ne adansi a wɔawie no nsɔ krataa so nsɛm hwɛ.

Di HSQY nkitaho na woanya Nhwɛsode ne Bo

Nsɛmmisa a Wɔtaa Bisa Fa 0.4mm Frosted PP krataa

Dɛn ne 0.4mm frosted PP krataa so nsɛm ?

Ɛyɛ polypropylene krataa so nsɛm a ɛyɛ tratraa a ɛyɛ den fã a ne kɛse yɛ 0.4mm wɔ din mu na ne soro yɛ matte anaa textured.

So 0.4mm ne microns 400 yɛ pɛ?

Aane. Polypropylene krataa so nsɛm a ne kɛse yɛ 0.4mm no ne microns 400 yɛ pɛ.

So 0.4mm PP krataa so nsɛm yɛ nea ɛyɛ mmerɛw anaasɛ ɛyɛ den?

Mpɛn pii no, ɛyɛ nea ɛyɛ katee fã bi. Etumi kotow na ɛbobɔw bere a ɛkura nipadua a ɛdɔɔso ma folda, nkataso, nnaka ne mpaapaemu.

Nsonsonoe bɛn na ɛda frosted ne glossy PP krataa so nsɛm ntam ?

Frosted PP wɔ textured, lower-glare surface, bere a glossy PP wɔ glossy surface a ɛyɛ den a ɛdannan ne soro a ɛda adi sɛ ɛhyerɛn.

So frosted PP krataa so nsɛm yɛ nea ɛda adi?

Abɔde mu frosted PP taa yɛ translucent mmom sen sɛ ɛbɛyɛ optically transparent. Transparency gyina resin, thickness, pigment ne surface texture so.

So frosted PP ma hann trɛw?

Textured surface no betumi ama diffuse visual effect, nanso applications a ɛhwehwɛ defined optical performance ɛsɛ sɛ ɛkyerɛ hann a ɛkɔ ne haze.

So wobetumi atintim frosted PP krataa so nsɛm ?

Aane. Ɛsɛ sɛ printing-grade PP taa nya corona ayaresa, ogya ayaresa anaasɛ primer a ɛne no hyia na ama ink adhesion atu mpɔn.

Akwan a wɔfa so tintim nhoma bɛn na wobetumi de adi dwuma?

krataa so nsɛm s a ɛfata betumi ayɛ UV offset tintim, screen print, UV inkjet tintim, flexographically anaa dijitaal tintim wɔ sɔhwɛ akyi.

Dɛn ne PP a wɔde corona sa yare krataa so nsɛm ?

Ɛyɛ polypropylene a wɔde anyinam ahoɔden ayɛ ne soro de ama ahoɔden a ɛwɔ soro no akɔ soro na ama ink, coating anaa adhesive wetting atu mpɔn.

So corona ayaresa no tra hɔ daa?

Dabi, ayaresa dodow no betumi akɔ fam bere a bere kɔ so no, enti ɛsɛ sɛ wɔsɔ ɔfasu no hwɛ ansa na wɔatintim bere a wɔde asie bere tenten awie no.

So wobetumi abɔ PP krataa so nsɛm no mpɛn pii?

PP grade a ɛfata betumi ama adwumayɛ a wɔabɔ no mpɛn pii, nanso ɛsɛ sɛ wɔsɔ resin, krataa so nsɛm akwankyerɛ, crease geometry ne additives hwɛ.

So wobetumi atwa 0.4mm PP krataa so nsɛm ?

Aane. Wobetumi atwa no die, abɔ no akuturuku, abɔ mu na wɔatwa no guillotine denam nnwinnade ne clearance a ɛfata so.

So wobetumi ayɛ PP krataa so nsɛm RF welded?

Standard PP no taa mfata mma RF welding a wɔtaa de di dwuma efisɛ ɛnyɛ nea etu mpɔn wɔ dielectric ɔhyew ho. Ɛsɛ sɛ wɔhwehwɛ ɔhyew a wɔde siw ano anaasɛ ultrasonic a wɔde ka bom ho mmom.

So wobetumi de polypropylene krataa so nsɛm ayɛ no ultrasonically welded?

Wobetumi de ultrasonically abɔ PP-to-PP afã horow a ɛne no hyia, nanso semi-crystalline PP hwehwɛ sɛ wɔyɛ nkabom nhyehyɛe a ɛfata ne mfiri nhyehyɛe.

So 0.4mm PP krataa so nsɛm fata ma fael folda ahorow?

Aane. Ne kari pɛ a ɛyɛ mmerɛw, ɛyɛ den, nsu a ɛko tia ne nea wotumi tintim no ma ɛfata ma ɔfese ne sukuu folda pii.

So wobetumi de ayɛ nnaka a wɔde kyekyere nneɛma?

Aane. Wobetumi atintim, atwa no die, abɔ mu na wɔabobɔw mu ayɛ no nnaka a emu yɛ hare a wɔde kyekyere nneɛma bere a wɔagye nhyehyɛe ne ɔkwan a wɔfa so to mu no atom akyi.

So frosted PP krataa so nsɛm yɛ nea nsu ntumi nkɔ mu?

PP wɔ nsuo a ɛtwetwe no sua koraa na ɛko tia nsuo a ɛtumi kɔ mu daa, nanso adaka anaa folda a ɛdi mũ no ntumi nkɔ nsuo mu ara kwa ɛfiri sɛ ebia nhama ne nnoɔma a wɔbue mu no bɛma nsuo akɔ mu.

So polypropylene tumi gyina nnuru ano?

PP gyina acid a ɛyɛ mmerɛw, alkalis ne nneɛma a wɔde tew nneɛma ho pii ano, nanso sɛnea ɛne ne ho hyia no gyina nnuru pɔtee, ne dodow, ɔhyew ne bere a wɔde hyɛ mu so.

So PP krataa so nsɛm aduan biara yɛ nea asiane biara nni ho?

Dabi, sɛnea ɛfata sɛ wɔde di dwuma wɔ aduan mu no gyina resin, nneɛma a wɔde yɛ nneɛma, nneɛma a wɔde ka ho, nneɛma a wɔde kata so, ink ne tebea horow a wɔahyɛ da ayɛ sɛ wɔde bedi dwuma no so.

So SGS anaa RoHS amanneɛbɔ bi kyerɛ sɛ wodi aduan a wɔde di nkitaho no so?

Amanneɛbɔ a ɛfa aduane a wɔde di nkitaho ho mmara a ɛfa ho, nnuru a wɔde yɛ, aduane a wɔde yɛ nsɛsoɔ ne tebea a wɔde di dwuma ho nko ara na ɛbɛtumi afoa asɛm a ɛfa ho no so.

So aduruyɛ-grade PP wɔ hɔ?

Wobetumi asusuw aduruyɛ mu abasobɔde titiriw ho bere a wɔakyerɛ resin, nneɛma a wɔde ka ho, ahotew, nea wotumi hwehwɛ, sterilization ne mmara mu ahwehwɛde ahorow akyi.

So anti-static PP krataa so nsɛm wɔ hɔ?

Aane. Wobetumi ayɛ bere tiaa mu anaa daa anti-static grades sɛnea wɔhwehwɛ sɛ wɔko tia ne bere tenten a etu mpɔn.

So conductive PP krataa so nsɛm wɔ hɔ?

Conductive PP grades wɔ hɔ ma ESD ne mfiridwuma mu dwumadie a wɔapaw, a ɛgyina resistance, grounding, kɔla ne mfiridwuma ahwehwɛdeɛ so.

So polypropylene krataa so nsɛm yɛ nea ogya ntumi nkɔ mu?

Dabi, Standard PP yɛ nea ɛyɛ hyew. Ogya a ɛmma ogya ntumi nhyew no hwehwɛ sɛ wɔyɛ nnuru pɔtee bi ne sɔhwɛ amanneɛbɔ ma ne kɛse ne ne gyinapɛn a ɛfata.

So standard frosted PP fata wɔ abɔnten?

Standard PP yɛ nea wɔayɛ titiriw sɛ wɔde bedi dwuma wɔ dan mu. Bere tenten abɔnten so dwumadie hwehwɛ sɛ wɔde UV-stabilized grade ne wim tebea ho adansedie.

So frosted PP krataa so nsɛm betumi asan de adi dwuma bio?

PP betumi ayɛ nea wotumi san de di dwuma bio wɔ baabi a nhyehyɛe a ɛfata a wɔde boaboa nneɛma ano na wɔyɛ ho adwuma wɔ hɔ. Inks, labels, coatings, fillers ne nneɛma a wɔde abata ho no betumi aka sɛnea ɛne ne ho hyia.

Kɔla ahorow bɛn na wobetumi ayɛ no sɛnea wɔpɛ?

Wobetumi de Pantone nkyerɛkyerɛmu anaa honam fam nhwɛsode a wɔapene so de abɔde, fitaa, tuntum, kɔla a ɛda adi ne kɔla a ɛnyɛ hann ahyia.

krataa so nsɛm akɛseɛ bɛn na ɛwɔ hɔ?

Nneɛma a wɔtaa yɛ no bi ne 915 × 1830mm, 1220 × 2440mm ne 1560 × 3050mm, a A4, A3 ne akɛseɛ a wɔatwa a wɔahyɛ da ayɛ nso wɔ hɔ.

So 2050 × 3050mm wɔ hɔ?

Ɛsɛ sɛ wɔsi saa kɛseɛ a ɛtrɛ kɛseɛ yi so dua ɛfiri sɛ ɛwɔ hɔ no gyina afiri a wɔde yɛ, ne kɛseɛ, ne soro ne ne tɛtrɛtɛ a ɛtu mpɔn ankasa so.

So metumi anya nhwɛsode bi?

A4 nhwɛsoɔ a ɛwɔ hɔ dada, kɔla nhwɛsoɔ ne tintim nhwɛsoɔ bɛtumi aba. Ebia kɔla ahorow a wɔayɛ no sɛnea wɔpɛ ne abasobɔde ahorow a ɛyɛ adwuma behia sɛ wɔsɔ hwɛ.

Dɛn ne bere a wɔde yɛ adwuma no?

Standard production mpɛn pii no hwehwɛ bɛyɛ nnafua 7-10 akyi specification, nhwɛsode, akatua ne packing a wɔahyɛ no den.

Nsɛm bɛn na wɔhwehwɛ na wɔafa aka asɛm?

Fa thickness, dimensions, kɔla, soro, tintim ayaresa, nsakrae nhyehyɛe, dwumadi grade, dodow, packing ne destination ma.

Nya Frosted PP krataa Nsɛm a Wɔafa Ka

Ɛfa HSQY Plastic Kuw ho

HSQY Plastic Group de frosted PP krataa so nsɛm s, polypropylene a ɛwɔ kɔla krataa so nsɛm s, PP a emu da hɔ krataa so nsɛm s, PP a ɛko tia ɔhyew krataa so nsɛm s, PET krataa so nsɛm s, PVC krataa so nsɛm s ne plastic nneɛma a wɔayɛ no sɛnea wɔpɛ ma amanaman ntam B2B adetɔfo.

HSQY boa nnwumakuw a wotintim nhoma, wɔn a wɔyɛ nneɛma a wɔde kyerɛw nneɛma, wɔn a wɔdannan nneɛma a wɔde kyekyere nneɛma, wɔn a wɔyɛ nsɛnkyerɛnne, nnwumakuw a wɔyɛ thermoforming, wɔn a wɔde nneɛma ba amannɔne ne wɔn a wɔkyekyɛ no denam nneɛma a wɔpaw, kɔla a ɛne ne ho hyia, nhwɛsode, nneɛma a wɔyɛ no sɛnea wɔpɛ, nhwehwɛmu ne nneɛma a wɔde kɔ amannɔne so.

Bisa sɛ wɔmfa ne bo nkyerɛ ne Nhwɛsode