Takardar PVC mai kauri 300 Micron HS-014

Takardar PVC mai kauri 300 Micron don Alamomi da Nuni

Kamfanin HSQY Plastic Group yana samar da takardar PVC mai launin micron 300 (0.3mm) mai launin ruwan kasa mai haske don nuna alamun, rabe-raben abubuwa, nunin kaya, bugawa, akwatunan naɗewa, aikace-aikacen blister da sauran samfuran da suka dace.

Bayanin da aka nuna shine micron 300, daidai yake da 0.3mm. Jerin samfuran da aka buga ya ƙunshi 0.10mm zuwa 2mm, tare da girman takardu na yau da kullun waɗanda suka haɗa da 700 × 1000mm, 750 × 1050mm, 915 × 1830mm da 1220 × 2440mm. Hakanan ana samun girma na musamman.

Ga masu kera alamun, masu ƙera nuni, firintoci, masu canza marufi da masu rarrabawa, muhimman abubuwan da suka shafi zaɓi sun haɗa da kauri, girman takardar, bayyanar saman da ya yi sanyi, lanƙwasa, hanyar sarrafawa ta ƙasa, buƙatun marufi da adadin oda.

Bidiyon Takardar PVC Mai Frosted Micron 300

Hotunan Samfurin Takardar PVC Mai Frosted Micron 300

Menene Takardar PVC Mai Frosted 300 Micron?

Takardar PVC mai girman micron 300 tana da kauri 0.3mm. Wannan samfurin yana haɗa wannan kauri da saman da aka yi masa sanyi ko matte, yana samar da kamanni mai haske wanda ke rage haske kai tsaye kuma yana rage ƙarfin haske a saman idan aka kwatanta da PVC mai sheƙi mai santsi.

Tsarin 0.3mm ya dace da aikace-aikacen da ke buƙatar takardar PVC mai siriri yayin da yake riƙe da isasshen tsari don bugawa mai dacewa, alamun, nuni, naɗewa, blister da aikace-aikacen samfuran da aka ƙera.

Bayanin samfurin yana gano ƙarfi da tauri mai kyau, kyakkyawan siffa mai kyau, kauri iri ɗaya da kuma yanayin yashi iri ɗaya. Waɗannan halaye suna da mahimmanci lokacin da ake sarrafa takardar ta hanyar bugawa, yankewa, ƙirƙirawa ko wasu ayyukan canza kaya.

Bayanin Takardar PVC Mai Sanyi Mai Micron 300

Lokacin Gabatarwa da aka Buga

Ya kamata a tabbatar da shirye-shiryen samarwa da isar da kaya na ƙarshe bisa ga kauri, girma, adadin oda da buƙatun marufi.

Takardun Fasaha

Ana samun takardun fasaha ga masu siye waɗanda ke kimanta takamaiman takardar PVC.

Sauke Takardar Bayanan Takardar Bayanin PVCSauke Rahoton Gwajin Takardar PVC

Muhimman Siffofi na Takardar PVC Mai Frosted Micron 300

Ma'aunin Micron 300 / 0.3mm Kauri na Daidaitacce

Kauri da aka nuna shine micron 300, daidai yake da 0.3mm, wanda ke ba da takamaiman takamaiman bayani ga masu siye waɗanda ke neman takardar PVC mai santsi don aikace-aikacen canza abubuwa masu dacewa.

Fuskar da aka yi da launin shuɗi mai haske

Bayanin samfurin yana gano yanayin yashi iri ɗaya da kuma kyakkyawan yanayin saman. Fuskar da aka yi da sanyi tana haifar da laushi fiye da na gargajiya mai santsi mai tsabta na PVC.

Kyakkyawan Faɗin Sama da Kauri Iri ɗaya

Kyakkyawan lanƙwasa da kauri mai daidaito suna da mahimmanci don bugawa, yankewa, naɗewa, canza blister da aikace-aikacen nunin da aka ƙera.

Ƙarfi Mai Kyau da Tauri

Bayanin samfurin da aka buga ya nuna ƙarfi da tauri mai kyau a matsayin halayen wannan takardar PVC.

Girman Takarda Mai Ma'auni Da Yawa

Tsarin da aka saba amfani da shi ya haɗa da 700 × 1000mm, 750 × 1050mm, 915 × 1830mm da 1220 × 2440mm, wanda ke bawa masu juyawa damar zaɓar girma da suka dace da tsarin yanke su.

Kauri da Girman da za a iya gyarawa

Baya ga ƙayyadaddun bayanai na micron 300 da aka nuna, kewayon da aka buga yana ƙaruwa daga 0.10mm zuwa 2mm tare da girma dabam dabam da ake da su.

Takardar PVC mai sanyi ta Micron 300 don Alamomi

Za a iya la'akari da takardar PVC mai sanyi mai tsawon mm 0.3 don amfani da alamun da suka dace inda masu siye ke buƙatar siraran kayan PVC masu kama da siffa mai haske.

Don samar da alamun, masu siye ya kamata su tabbatar da girman allon da aka gama, tsarin tallafi ko tallafi, hanyar yankewa da yanayin shigarwa kafin zaɓar takamaiman takardar ƙarshe.

Takardar PVC mai sanyi don sassa da nuni

Fuskar da aka yi da sanyi tana rage hasken gani kai tsaye yayin da take riƙe da kamanni mai haske, wanda hakan ke sa kayan su dace da abubuwan da suka dace da sassan rabawa, rabawa da kuma nunin kaya.

Don aikace-aikacen da ke buƙatar takamaiman matakin sirri ko watsa haske, ya kamata a kimanta kayan da aka gama a ƙarƙashin ainihin yanayin haskensa da shigarwarsa.

Aikace-aikacen Bugawa, Akwatin Naɗewa da Blister

Bugawa, akwatunan naɗewa da kuma blister sune aikace-aikacen da aka jera don wannan samfurin. Tsarin 300 micron yana ba masu juyawa kauri mai faɗi don kimanta waɗannan hanyoyin samarwa.

Don bugawa, masu siye ya kamata su gwada tawada da tsarin samarwa da aka yi niyya a kan ainihin saman PVC mai sanyi. Don naɗewa da aikace-aikacen blister, ya kamata a kimanta takardar ta amfani da kayan aikin aunawa, naɗewa ko ƙirƙirar da aka yi niyya kafin a sake yin amfani da shi.

Aikace-aikacen Takardar PVC Mai Frosted Micron 300

Alamar

Ya dace da zaɓaɓɓun allunan alamun da kayan haɗin alamar da aka ƙera waɗanda ke buƙatar siraran saman PVC mai sanyi.

Nunin Siyarwa

Ana iya amfani da bayyanar matte mai haske don shigar da nunin faifai masu dacewa, bangarori da kayan haɗin kasuwanci.

Rarrabuwa

Fuskar da aka yi da sanyi za ta iya rage gani kai tsaye a aikace-aikacen rabawa da rabawa da suka dace.

Bugawa

Bugawa aikace-aikace ne da aka jera. Ya kamata a kimanta dacewa ta amfani da tawada da aka yi niyya, kayan aiki da yanayin samarwa.

Akwatunan Naɗewa

Ana iya la'akari da kayan don aikace-aikacen akwatin naɗewa mai haske ko mai sanyi bayan kimanta tsarin naɗewa da maki da aka zaɓa.

Aikace-aikacen Kuraje

An jera blister a matsayin aikace-aikacen wannan samfurin. Ya kamata a tabbatar da dacewa da tsari da kayan aikin blister da aka yi niyya.

Kayan Ado

Haka kuma ana iya amfani da siffar matte translucent don dacewa da allunan ado da kayan da aka ƙera.

Hoton Aikace-aikacen Samfura

Don ƙarin cikakkun bayanai game da takardar PVC mai tauri, duba Jerin samfuran takardar PVC.

Ana lodawa da kuma shirya kwantena

Marufi da Isarwa

Samfurin Marufi

Marufin samfurin da aka buga ya ƙunshi zanen gado da aka kare a cikin jakunkunan PE kuma an saka su a cikin kwali.

Marufin Takarda

Jerin abubuwan da aka lissafa na ɗaukar takardar takarda shine kimanin kilogiram 30 a kowace jaka tare da fim ɗin PE, ko kuma bisa ga buƙatun da aka amince da su.

Marufin Pallet

Marufin pallet da aka buga yana da nauyin kimanin kilogiram 500-2000 a kowace pallet ɗin plywood.

Ana loda kwantena

Nauyin da aka buga ya kai kimanin tan 20 don shirye-shiryen kwantena masu tsawon ƙafa 20 ko ƙafa 40.

Sharuɗɗan Isarwa

An lissafa FOB, CIF da EXW a matsayin sharuɗɗan isarwa da ake da su.

Takaddun shaida

Bayanin samfurin ya lissafa takaddun shaida na SGS da ISO 9001:2008. Masu siye da ke buƙatar takaddun shaida don takamaiman oda ya kamata su tabbatar da takaddun shaida da ƙayyadaddun samfurin da suka dace.

Nunin Ƙasa da Ƙasa na Ƙungiyar Roba ta HSQY

Yadda Ake Zaɓar Takardar PVC Mai Frosted Micron 300

1. Tabbatar Ko 0.3mm Ya Cika Bukatar Aikace-aikacen

Bayanin da aka nuna shine micron 300 ko 0.3mm. Masu siye da ke buƙatar kauri daban-daban za su iya tattauna zaɓuɓɓuka a cikin kewayon 0.10mm zuwa 2mm da aka buga.

2. Zaɓi Girman Takardar da ake buƙata

Zaɓi daga cikin ma'aunin da aka lissafa ko ƙayyade girman da aka keɓance bisa ga tsarin yankewa da girman samfurin da aka gama.

3. Tabbatar da Bukatar Fuskar Da Aka Yi Sanyi

Kimanta daidaiton da ake buƙata tsakanin gani, watsa haske da kuma bayyanar matte ta amfani da samfurin da aka yi niyya don gamawa.

4. Bayyana Hanyar Sarrafawa

A nuna ko za a buga kayan, a yanke, a haƙa su, a naɗe su, a yi musu tsari ko kuma a canza su ta yadda za a iya kimanta takamaiman bayanin da aka zaɓa yadda ya kamata.

5. Tabbatar da Bukatun Shiryawa da Isarwa

Samar da adadin da ake buƙata, tsarin shirya kaya da wurin da za a kai kayan yayin neman farashi.

Tambayoyin da Ake Yawan Yi Game da Takardar PVC Mai Frosted Micron 300

Menene takardar PVC mai frosted 300 micron?

Takardar PVC ce mai kauri 0.3mm tare da saman da aka yi da frosted ko matte wanda aka tsara don dacewa da bugu, alamun shafi, nuni, rabawa, akwatin naɗewa da aikace-aikacen blister.

Shin micron 300 daidai yake da 0.3mm?

Eh. Microns 300 daidai yake da 0.3mm.

Waɗanne girman takardar da ake da su?

Girman da aka saba amfani da su sun haɗa da 700 × 1000mm, 750 × 1050mm, 915 × 1830mm da 1220 × 2440mm.

Za a iya samar da wasu kauri da girma dabam dabam?

Eh. Kauri da aka buga shine daga 0.10mm zuwa 2mm, kuma ana samun girman takardar da aka keɓance.

Za a iya amfani da takardar PVC mai girman micron 300 don nuna alama?

Eh. Alamar alama tana ɗaya daga cikin aikace-aikacen da aka jera don wannan samfurin.

Za a iya amfani da takardar PVC mai sanyi don sassauta shinge?

Eh. An lissafa aikace-aikacen rabawa inda saman da aka yi masa fenti mai haske da kuma ganuwa kai tsaye suka dace.

Shin PVC mai kauri 0.3mm ya dace da nunin dillalai?

An haɗa nunin dillalai cikin aikace-aikacen da aka buga don wannan samfurin.

Za a iya buga wannan takardar PVC?

An jera bugawa a matsayin aikace-aikace. Masu siye ya kamata su kimanta tsarin tawada da bugawa da aka yi niyya ta amfani da ainihin saman PVC mai sanyi.

Za a iya amfani da shi don akwatunan naɗewa da samfuran blister?

Eh. Akwatunan naɗewa da blister sune aikace-aikacen da aka jera. Ya kamata a kimanta kayan da aka zaɓa ta hanyar naɗewa ko tsarin ƙirƙirar da aka yi niyya.

Za a iya yanke takardar, haƙa rami ko kuma a samar da ita?

Bayanin samfurin ya nuna cewa ana iya yanke takardar PVC mai sanyi, a haƙa ta sannan a samar da ita. Ya kamata yanayin sarrafawa ya dace da kauri da aka zaɓa.

Za a iya amfani da wannan samfurin a waje?

Ana nuna alamun waje a cikin bayanin samfurin. Ga ayyukan da ke da ƙayyadadden buƙatun rayuwa a waje, UV ko tsufa, masu siye ya kamata su tabbatar da ƙayyadaddun kayan da suka dace kafin yin oda.

Menene yawan wannan takardar PVC?

Matsakaicin yawan da aka buga shine 1.28–1.40 g/cm³.

Waɗanne takaddun shaida ne aka lissafa don wannan samfurin?

Bayanin samfurin ya lissafa SGS da ISO 9001: 2008.

Menene sharuɗɗan MOQ, biyan kuɗi da isarwa?

MOQ ɗin da aka buga shine 1000kg. Sharuɗɗan biyan kuɗi da aka lissafa sune ajiya 30% da kuma kashi 70% na sauran kafin jigilar kaya, tare da sharuɗɗan isar da FOB, CIF da EXW.

Menene lokacin gabatarwar da aka buga?

Bayanin da aka buga shine kwanaki 7 don nauyin kilogiram 1–3000, kwanaki 10 don nauyin kilogiram 3001–10000, kwanaki 15 don nauyin kilogiram 10001–20000 da kuma shawarwari kan adadin da ya wuce kilogiram 20000.

Wane bayani ya kamata in bayar don yin ƙiyasin farashi?

Da fatan za a samar da kauri da ake buƙata, girman takardar, aikace-aikacen, hanyar sarrafawa, adadi, buƙatun marufi da wurin isar da kaya.

Game da Ƙungiyar Roba ta HSQY

HSQY Plastic Group tana da fiye da shekaru 20 na gwaninta wajen samar da takardar filastik da kayayyakin da suka shafi marufi, bugawa, sanya alama, gini da sauran aikace-aikacen canza kaya.

Ga ayyukan takardar PVC mai frosted micron 300, masu siye za su iya tattauna kauri, girma, bayyanar saman, sarrafawa, tattarawa da buƙatun isarwa bisa ga aikace-aikacen da aka gama.