Adzɔnuwo Ŋuti Nyatakakawo

Adzɔnuwo ƒe Ŋkɔ	PC Card Material , polycarbonate ƒe nutsyɔnu film
Nu	100% nu yeye si nye polycarbonate
Amadede	porcelain ɣi, notsi ɣi,Transparent
Ŋkume	si le gbadzaa, si me tsikpe le Glossy, Matt
Titrime ƒe didime	0.05/0.06/0.075/0.10/0.125/0.175/0.25mm alo wowɔe ɖe ɖoɖo nu
Nuwᴐna	Ɣletigbalẽ dzi wɔwɔ
Mᴐbibia	plastik kaɖi wɔwɔ, Laser nuŋɔŋlɔ kaɖi,Laser agbalẽtata kaɖi
Agbalẽtata ƒe Tiatiawɔblɔɖe	CMYK Offset Tata, Silk-screen tata, UC dedienɔnɔ tata, Laser tata

1) Kekeli gã ƒe kaka: Va ɖo 88% be eƒe titrime ma ke le glass bliboa me.

2) Tsitretsitsi ɖe nu ŋu nyuie ŋutɔ: ahuhɔ̃e tɔ ƒe teƒe 80.

3) Yame ƒe nɔnɔme kple UV tsitretsitsi-nɔnɔme siwo wolé ɖe asi ƒe geɖe: Dzoxɔxɔ ƒe tsitretsitsi ƒe didime nye 40 ° C ~ + 120 ° C, kple ultraviolet coextruded film le agbalẽa ƒe anyime. Ate ŋu axe mɔ ɖe aŋɔ ƒe ɖeɖiteameŋu alo ɣie si ultraviolet hena vɛ nu.

4) Kpekpeme si le bɔbɔe: Glass si ƒe titrime sɔ ƒe kpekpeme ƒe 1/12 koe. Woate ŋu abɔbɔe bɔbɔe le vuvɔ me eye woatsɔe awɔ dzoxɔxɔ ƒe nɔnɔme hã.

5) Dzo ƒe tsitretsitsi: Dzo ƒe dɔwɔwɔ ƒe dzidzedzekpɔkpɔ kɔkɔe nye hatsotso B1.

6) Gbeɖiɖi kple dzoxɔxɔ xɔxlɔ̃: Superb gbeɖiɖi xɔxlɔ̃ na freeway mɔxenu kple super dzoxɔxɔ xɔxlɔ̃ dzraa ŋusẽ ɖo.

7) Mɔ̃ɖaŋununya ƒe plastik si si ƒoƒo ɖekae ƒe ŋutete nyuitɔ kekeake le. Dzɔdzɔmeŋusẽ, mɔ̃ɖaŋu, elektrikŋusẽ kple dzoxɔxɔ ƒe ŋutete ɖedzesiwo le esi.

PC gbalẽvi ƒe nuzazãwo

1. Elektrɔnikmɔ̃wo: Polycarbonate nye nu nyui aɖe si xea mɔ na ya ƒe dzoxɔxɔ, si wozãna tsɔ wɔa nusiwo xea mɔ na dzoxɔxɔ ƒe plug-ins, coil frames, tube sockets, kple batri ƒe gowo na tomenukulawo ƒe akaɖiwo.

2. Mɔ̃ɖaŋudɔwɔnuwo: wozãna tsɔ wɔa gear vovovowo, racks, bolts, levers, crankshafts, kple mɔ̃ɖaŋudɔwɔnu aɖewo ƒe xɔwo, nutsyɔnuwo, xɔtunuwo kple akpa bubuwo.

3. Atikewɔnuwo: kpluwo, pɔmpiwo, aŋetuwo, aɖudɔwɔnuwo, atikewɔnuwo, kple ŋutinu wɔwɔe siwo woate ŋu azã na atikewɔwɔ gɔ̃ hã.

 4. Akpa bubuwo: wozãnɛ le xɔtutu me abe hollow rib double arm panels, greenhouse glass, kple bubuawo ene.

Nyabiasewo ƒe Nyabiasewo

Q: Nukae nye dzo ƒe dzidzedzekpɔkpɔ le Polycarbonate –
A:Klass B1 dzo dzidzedze si nye dzo dzidzedzekpɔkpɔ nyuitɔ kekeake.

Q:Ðe Polycarbonate mate ŋu agbã o –
A:Nu la nye nusi womate ŋu agbã o kloe eye wòatsi tre ɖe nɔnɔme siwo te ŋu nɔa te ɖe ŋusẽkpɔɖeamedzi nu ƒe akpa gãtɔ nu, ke hã, womaka ɖe edzi 100% be nu la mate ŋu agbã o, le kpɔɖeŋu me, nenye be nusi wotsɔ wɔe la anɔ nɔnɔme si me wowó le me alo woazãe le nɔnɔme si me woate ŋu agbã nu le me o.

Q: Ðe mate ŋu atso Polycarbonate le aƒeme eye mehiã dɔwɔnu tɔxɛ aɖeke -
A:Àte ŋu azã míaƒe lãɖeɖe ɖe lolome subɔsubɔdɔa atsɔ aɖe lãɖeɖe ƒe fuɖename, ke hã, ne ehiã be nàtso ʋuƒoawo le aƒeme la, àte ŋu azã jigsaw, Band Saw kple fret saws.

Q:Aleke mawɔ akɔ nye polycarbonate gbadzɛ -
A:Mègazã abrasive nusiwo akpɔ ŋusẽ ɖe nuawo dzi o, aɖaŋuɖoɖo nyuitɔ kekeakee nye be nàzã adzalẽtsi dzodzoe kple avɔ falɛfalɛ.

Q: Nukae nye vovototo si le Polycarbonate kple Acrylic dome -
A:Vovototo vevitɔ si le wo ame evea domee nye be Polycarbonate nye nusi womate ŋu agbã o kloe, acrylic sesẽ wu glass sã, gake agbã/agbã ne wotsɔ ŋusẽ de eme. Polycarbonate nye dzo ƒe hatsotso 1 ƒe dzeside afisi Acrylic nye dzoxɔxɔ ƒe hatsotso 3 / 4 ƒe dzeside.

Q: Ðe agbalẽawo ƒe amadede trɔna le ɣeyiɣi si sɔ gbɔ wu ɣeyiɣia mea?
A: Le UV ametakpɔnu si me kɔ la,PC agbalẽwo metrɔa amadede o eye ate ŋu anɔ anyi didi wu ƒe 10 gɔ̃ hã.

Q: Ðe polycarbonate xɔtaxɔwo nana nuwo xɔa dzo ŋutɔa?
A: Polycarbonate xɔtaxɔwo menaa nuwo xɔa dzo ŋutɔ kple ŋusẽ si klẽna ƒe nutsyɔnu kple nusiwo xea mɔ na ya ƒe nɔnɔme nyuiwo o.

Q: Ðe agbalẽawo gbãna bɔbɔe ŋutɔa?
A: Polycarbonate agbalẽwo nye nusi gbɔ eme impact-resistant.Thanks woƒe dzoxɔxɔ kple yame ƒe nɔnɔme tsitretsitsi,wo le didi wu
subɔsubɔ agbenɔƒe.

Nuwo babla 

Dɔwɔƒea ƒe ŋgɔdonya

   Changzhou Huisu Qinye Plastic Group Co., Ltd. bi ɖe wɔwɔ kple edzadzra me PC board, PC dzidodo board, PC kaka board kple PC board dɔwɔwɔ, nuŋɔŋlɔ, bending, pɛpɛpɛ lãɖeɖe, punching, polishing, banding, thermoforming, le 2.5 * 6 mita Blister, abs titri agbalẽvi blister, UV flatbed tata, screen tata, nutatawo kple kpɔɖeŋuwo woate ŋu awɔ dɔ tso eŋu. Míekpɔ nuteƒekpɔkpɔ si wu ƒe 16 le nusiwo wotsɔ ɖoa ​​duta, si naa nusiwo le nyonyome deŋgɔ PC-gbalẽviwo na asisiwo le xexeame katã, eye woxɔ kafukafu kple susu ɖeka tso asisiwo gbɔ le xexeame katã.

Susu le asiwò be nàtia Polycarbonate board si le Huisu Qinye Plastic Group me!

Adzɔnuwo Ŋuti Nyatakakawo

Adzɔnuwo ƒe Ŋkɔ	Kɔkɔ glossy transparent polycarbonate plastic agbalẽ
Eƒe titrime	1mm-50mm ƒe didime
Max. Kekeme	1220cm ƒe didime
Didime	Woate ŋu atrɔ asi le eŋu
Agbɔsɔsɔme si Woɖo Ðe Ðoɖo Nu	1220 * 2440MM ƒe xexlẽme
Amadedewo	Eme kɔ, blɔ, amadede dzẽ, opal, blɔ, ɣi, kple bubuawo Woate ŋu atrɔ asi le eŋu
Ðaseɖigbalẽ nana	ISO, ROHS, SGS, C. E., kple ame bubuwo

Viɖe vevi siwo le PC-nuawo ŋue nye: ŋusẽ gã kple elastic coefficient, ŋusẽ gã si wotsɔ ƒoa nuwoe, dzoxɔxɔ ƒe didime si wozãna; nusiwo me kɔ ŋutɔ kple amadede si woate ŋu ade amae femaxee; low forming shrinkage, didime ƒe liƒo nyui; yame ƒe nɔnɔme ƒe tsitretsitsi nyuie; vivi mele eme o eye meʋẽna o Afɔkuwo wɔ ɖeka kple lãmesẽ kple dedienɔnɔ.

PC gbalẽvi ƒe nuzazãwo zazã

  1. Elektrɔnikmɔ̃wo: Polycarbonate nye nu nyui aɖe si xea mɔ na ya ƒe dzoxɔxɔ, si wozãna tsɔ wɔa nusiwo xea mɔ na dzoxɔxɔ ƒe plug-ins, coil frames, tube sockets, kple batri ƒe gowo na tomenukulawo ƒe akaɖiwo.

2. Mɔ̃ɖaŋudɔwɔnuwo: wozãna tsɔ wɔa gear vovovowo, racks, bolts, levers, crankshafts, kple mɔ̃ɖaŋudɔwɔnu aɖewo ƒe xɔwo, nutsyɔnuwo, xɔtunuwo kple akpa bubuwo.

3. Atikewɔnuwo: kpluwo, pɔmpiwo, aŋetuwo, aɖudɔwɔnuwo, atikewɔnuwo, kple ŋutinu wɔwɔe siwo woate ŋu azã na atikewɔwɔ gɔ̃ hã.

4. Akpa bubuwo: wozãnɛ le xɔtutu me abe hollow rib double arm panels, greenhouse glass, kple bubuawo ene.

Dɔwɔƒea ƒe ŋgɔdonya

Huisu Qinye Plastic Group Co., Ltd. bi ɖe wɔwɔ kple edzadzra me PC board, PC dzidodo board, PC kaka board kple PC board dɔwɔwɔ, nuŋɔŋlɔ, bɔbɔ, pɛpɛpɛ lãɖeɖe, punching, polishing, bonding, thermoforming, le 2.5 * 6 mita Blister, abs titri agbalẽvi blister, UV flatbed tata, screen tata, nutatawo kple kpɔɖeŋuwo ate ŋu awɔ dɔ. Ƒe 10 kple edzivɔ ƒe nuteƒekpɔkpɔ le mía si le nusiwo míetsɔna ɖoa duta me, míetsɔa PC-gbalẽvi deŋgɔwo naa asisiwo le xexeame katã, eye míexɔ kafukafu kple susu ɖeka tso asisiwo gbɔ le xexeame katã.

Susu le asiwò be nàtia Polycarbonate board si le Huisu Qinye Plastic Group me