HSQY Klɔ PETG Agbalẽvi 0.5mm x 297mm x 210mm A4 KPEKPEÐEŊU A3 AKPAÐEKA

0.5mm Klɔ PETG Agbalẽvi le A4 kple A3 ƒe lolomewo me

HSQY wɔa 0.5mm PETG agbalẽ siwo me kɔ le A4 kple A3 ƒe lolomewo me na dzoxɔxɔ ƒe wɔwɔme, vacuum wɔwɔ, kpɔɖeŋuwɔwɔ, babla, agbalẽtata, nutsyɔnu siwo me kɔ, asitsaƒewo ƒe ɖeɖefiawo, agbalẽŋlɔnuwo kple custom fabrication.

Nusi woɖe fia ƒe nɔnɔme nye 0.5mm ƒe titrime. Lãɖeɖe ƒe lolome siwo wozãna ɖaa dometɔ aɖewoe nye A4 le 210 × 297mm kple A3 le 297 × 420mm.

PETG ƒe titrime siwo wowɔ ɖe ɖoɖo nu tso abe 0.15mm va ɖo 7mm ene li. Woate ŋu ana gadzidzenu tsɛwo abe agbalẽ xatsaxatsa alo agbalẽ xatsaxatsawo ene, evɔ zi geɖe la, wotsɔa nusiwo le kpekpem wu vɛ abe agbalẽ gbadzawo ene.

PETG nye copolyester si me kɔ si wotsɔ glycol trɔ asi le si ŋu wode asixɔxɔe le eƒe nukpɔkpɔ me kɔ, eƒe sesẽ, dzoxɔxɔ ƒe dɔwɔwɔ kple tsitretsitsi ɖe lãɖeɖe alo gbagbã ŋu le ewɔwɔ me ta.

Woate ŋu awɔ PETG agbalẽvi siwo me kɔ, siwo ƒe amadede nye blɔ si me kɔ, siwo me tsikpe le, siwo ƒe amadede nye matte, siwo ƒe amadede le vovovo eye wotrɔ asi le wo ŋu le dɔwɔwɔ si wobia, woƒe titrime kple nudɔdɔ ƒe agbɔsɔsɔ suetɔ nu.

Wokafu standard PETG koŋ na xɔme zazã. Dzesi siwo nɔa anyi didi le gota, nukpɔkpɔwo kple xɔtunuwo hiã na UV-stabilized alo UV-coextruded PETG grade si wowɔ na yame ƒe nɔnɔme kple subɔsubɔ ƒe ɣeyiɣi si wokpɔ mɔ na.

Nuɖuɖu-kadodo, atikewɔwɔ, antistatic, dzo-tsitretsitsi, ƒoƒo kple UV-tsitretsitsi PETG atikewo hiã na dzeside kpeɖodzi vovovowo kple dodokpɔgbalẽ siwo sɔ.

Dzro nu bliboa me HSQY PETG agbalẽvi ƒe didime alo ŋkuléle ɖe eŋu kpee PET agbalẽ ƒe nuzazãwo.

Bia PETG Agbalẽvi ƒe Asixɔxɔ    Bia A4 kple A3 ƒe Kpɔɖeŋuwo

Nukae Nye PETG ƒe Agbalẽvi si Me Kɔ?

PETG nye polyethylene terephthalate copolyester si wotsɔ glycol trɔ asi le si wowɔ be wòaɖe kristalowɔwɔ dzi akpɔtɔ le ewɔwɔ kple eŋudɔwɔwɔ me.

Nusi wotsɔ wɔe la ƒoa nu tso nukpɔkpɔ gã kple sesẽme si ŋu viɖe le nu ƒu eye woate ŋu awɔe wòazu nɔnɔme siwo me kɔ to vacuum, nyaƒoɖeamenu alo mɔ̃ɖaŋu-kpekpeɖeŋu thermoforming mɔnuwo zazã me.

Woateŋu atso PETG hã to mɔ̃ dzi, atsoe wòaku, aƒoe, aƒoe, akplɔe, axɔ dzesi, abɔbɔ, ata, aɖo atsyɔ̃ eye woatsɔe ablae to mɔnu siwo sɔ na nusiwo ƒe hatsotso si wotia la zazã me.

Le 0.5mm ƒe titrime me la, PETG gakpɔtɔ te ŋu trɔna bɔbɔe na akpa siwo wowɔ siwo ƒe kpekpeme le bɔbɔe esime wònaa ŋutilã kple didime ƒe liƒo geɖe wu nubablɛ film siwo le tsɛ ŋutɔ.

Woateŋu aɖɔ PETG si me kɔ hã be enye copolyester ƒe agbalẽ si me kɔ, G PET agbalẽ, PETG film, vacuum-forming PETG agbalẽ alo glycol-trɔ asi le PET agbalẽ.

Klɔ PETG Agbalẽvi ƒe Nɔnɔmewo ɖa

Ele be nɔnɔme mamlɛawo nade dzesi titrime ƒe mɔɖeɖe, didime, dzogoe ene me, anyigba ƒe nuwuwu, nukpɔkpɔ ƒe nudidiwo, ametakpɔnu film, amadede, grade, packing kple ɖoɖo si wowɔ be woatsɔ awɔ dɔe.

Nufiame PETG Mɔ̃ɖaŋununya ƒe Nɔnɔmewo

Asixɔxɔ siawo nye nyatakaka siwo ŋu woƒo nu tsoe le mɔ gbadza nu tso mɔ̃ɖaŋununya ƒe agbalẽvi si li me eye womeɖo kpe edzi be woagblɔ woƒe titrime, amadede alo nuwɔwɔ ƒe hatsotso ɖesiaɖe o.

A4 kple A3 PETG Agbalẽvi ƒe Agbɔsɔsɔme Mɔfiame

PETG ƒe Agbalẽvi Siwo Me Kɔ ƒe Nɔnɔme Veviwo

Nukpɔkpɔ ƒe Kɔkɔe ƒe Kɔkɔe

Clear PETG naa nukpɔkpɔ gã aɖe na nubablɛwo, nukpɔkpɔwo, nutsyɔnuwo kple dɔwɔwɔ siwo me adzɔnuwo ƒe dzedzeme le vevie le.

Dzoxɔxɔ ƒe Dɔwɔwɔ

PETG ateŋu agbugbɔ aŋe siwo me kɔ tsitotsito eye wòsɔ na vacuum wɔwɔ, nyaƒoɖeamenu wɔwɔ kple deep-draw dɔwɔwɔwo ne wozã grade nyuitɔ kple dzoxɔxɔ ƒe nɔnɔmewo.

Ŋusẽkpɔɖeamedzi ƒe Tsitretsitsi si Ŋu Viɖe le

PETG zi geɖe la, enaa tsitretsitsi ɖe lãɖeɖe kple gbagbã ŋu nyuie wu acrylic si wozãna ɖaa le dɔwɔwɔ geɖe siwo wowɔ kple esiwo wotsɔ dzoxɔxɔ wɔe me.

Fabrication Blɔɖe

Woateŋu atso agbalẽa, aƒoe, aƒoe, akplɔe, abɔbɔe, ablae eye woawɔe to dɔwɔnu kple dɔwɔwɔ ƒe nɔnɔme siwo sɔ na PETG zazã me.

Woate ŋu atae eye woate ŋu aɖo atsyɔ̃ nɛ

Woateŋu ata PETG ƒe dzesi tiatia aɖewo ɖe screen dzi, ata wo, atre dzoxɔxɔ nu alo ata wo to dijitaal dzi le ink, adhesion kple curing dodokpɔwo megbe.

Agbalẽvi kple Agbalẽxatsaxatsa ƒe Nɔnɔme Siwo Wotrɔ Asi Le

HSQY ate ŋu ana A4, A3, custom cut sheets, large sheets kple roll stock le titrime si wotia nu.

Dzoxɔxɔ ƒe wɔwɔme 0.5mm PETG Agbalẽvi

0.5mm PETG gbadzɛ sɔ na nubablɛ siwo wotsɔ vacuum wɔe siwo ƒe kpekpeme le bɔbɔe, kpɔɖeŋu ƒe akpawo, nutsyɔnuwo, kpɔɖeŋu ƒe akpawo kple nɔnɔme siwo wowɔ siwo me goglo alo esiwo me goglo le titina.

Ele be woado dzo na agbalẽa ɖekae be wòaƒo asa na teƒea ƒe ƒuƒu, flitete, webbing alo nukpɔkpɔ ƒe nyonyome ƒe bu.

Nuwɔwɔ ƒe goglome, aŋɔ ƒe nɔnɔme, ya ƒe dzogoe, dzogoe ƒe didime, plug ƒe kpekpeɖeŋu, dzoxɔxɔnamɔ̃ ƒe ƒomevi kple tsatsam ƒe ɣeyiɣie ɖoa gli-titrime mama mamlɛtɔ.

Woateŋu awɔ PETG agbalẽ ƒe hatsotso geɖe le dzoxɔxɔ me evɔ womaƒu wo do ŋgɔ o ne wodzra wo ɖo nyuie, gake ele be woawɔ ɖe nudzrala ƒe dɔwɔwɔ ŋuti mɔfiamewo kple agbalẽ-tsi ƒe nɔnɔme ŋutɔŋutɔ dzi.

Ele be woaɖe ametakpɔnu ƒe nutsyɔnu ɖa le teƒe siwo dzoxɔxɔ si le wɔwɔm le negbe ɖe nutsyɔnu dzrala ɖo kpe edzi be esɔ na dɔa wɔwɔ hafi.

Ele be dodokpɔ siwo wowɔ do ŋgɔ na ewɔwɔ nada eme kɔ, web sag, formed-wall ƒe titrime, aŋɔ ƒe dodo, shrinkage kple trimming quality.

Lãɖeɖe, Babla kple Fabrication

• Zã hɛ ɖaɖɛwo, guillotines, punches alo steel-rule dies na PETG agbalẽ tsɛwo.

• Zã saw blades, routers alo milling dɔwɔnu siwo sɔ na PETG agbalẽ siwo le kpekpem wu.

• Do alɔ agbalẽa le etsotso me be wòaɖe ʋuʋudedi kple eƒe nugbɔ ƒe gbegblẽ dzi akpɔtɔ.

• Zã dɔwɔnu ƒe ʋuʋu si sɔ be nàɖe ɣie, burrs kple gbagbã dzi akpɔtɔ.

• PETG ateŋu anye line bent alo cold bent ne grade, titrime kple bend radius sɔ.

• Ele be woado akɔtaɖonu sesẽwo kpɔ be nuteɖeamedzi ƒe ɣie kple spring-back hã.

• Ele be do siwo woɖe la nazã teƒe ƒe nɔnɔme si sɔ kple nugbɔ ƒe didime si sɔ.

• Ele be woado atike siwo wotsɔna léa nu ɖe ​​nu ŋu, atike siwo wotsɔna ƒoa ƒui kple esiwo wotsɔa ga ƒoa nui kpɔ be ŋusẽ le wo ŋu, wo me kɔ eye wosɔ ɖe atikewo nu hã.

• Ele be woawɔ laser lãɖeɖe kple dɔwɔnuwo, yaƒoƒo kple ɖoɖo siwo dzi woda asi ɖo na PETG ƒe dzesi si wotia ko.

Agbalẽtata Kple Atsyɔ̃ɖoɖo

PETG wozãna na nutata siwo wota, nusiwo wotsɔ tsyɔa nu dzi, dzesiwo, nubablɛ ƒe fesrewo, kaɖiwo kple atsyɔ̃ɖonuwo.

UV-dɔdamɔnu si ŋu ŋusẽ geɖe le kple atike siwo me wowɔa nu dzikutɔe ate ŋu akpɔ ŋusẽ ɖe PETG ƒe dzesi aɖewo dzi. Ele be woado agbalẽtata ƒe mɔnu bliboa kpɔ hafi woawɔe le agbɔsɔsɔ gã me.

Xɔme kple Gbedoxɔ PETG Dzesidewo

Mele be woagblɔ tso dzidzenu PETG ŋu le eɖokui si be Ete ŋu nɔa te ɖe UV nu tegbee alo wòsɔ na gotagome nɔnɔme ɖesiaɖe o.

Nuɖuɖu-Kadodo kple Atikewɔwɔ PETG Dzesidewo

Mele be woaɖɔ PETG agbalẽvi si me kɔ si wozãna na nusianu le eɖokui si be woda asi ɖe edzi be woatsɔe aƒo ka na nuɖuɖu tẽ alo azãe le atikewɔwɔ me o.

Nuɖuɖu-kadodo ƒe nyonyo nɔ te ɖe PETG aŋɔ, nusiwo wotsɔ kpe ɖe eŋu, amadedewo, nusiwo wotsɔ blaa nu, ametakpɔnu ƒe nutsyɔnu, nuɖuɖu ƒomevi, kadodo ƒe ɣeyiɣi, dzoxɔxɔ kple asi si me woayi dzi.

Atikewɔwɔ ƒe dɔwɔwɔ ate ŋu abia be woatsɔ nu xoxo siwo dzi wokpɔ ŋusẽ ɖo, wo yometiti, dzadzɛnyenye, nugbagbewo ƒe dɔwɔwɔ ŋuti nyatakakawo, dɔlékuiwutike dodokpɔ kple nubablɛwo ƒe kpeɖodzi.

Ele be nuƒlelawo nagblɔ sedede kple dodokpɔ ƒe nudidi siwo sɔ hafi atia nuɖuɖu-kadodo alo atikewɔwɔ PETG ƒe dzeside.

0.5mm A4 kple A3 PETG Agbalẽviwo ƒe dɔwɔwɔ

• Vacuum-wɔwɔdɔwo: Kpɔɖeŋu trays, nubablɛwo ƒe kpɔɖeŋuwo, nutsyɔnu suewo kple kpɔɖeŋu akpa siwo wowɔ.

• Kpɔɖeŋuwɔwɔ: Xɔtuɖaŋu ƒe kpɔɖeŋuwo, asinudɔwɔwɔ ƒe akpawo, sukudɔwo kple adzɔnuwo ƒe kpɔɖeŋuwo.

• Blister packaging: Nubablɛ siwo wowɔ si le bɔbɔe kple kpɔɖeŋu packaging le wɔwɔ dodokpɔwo megbe.

• Asitsaƒewo ƒe ɖeɖefiawo: Nusiwo wotsɔ dea eme siwo me kɔ, nusiwo wotsɔ léa nu, nusiwo woɖena fiana le agbalẽdzraɖoƒe kple boblododo ƒe akpawo.

• Agbalẽtata: Dzesi siwo me kɔ, nɔnɔmetatawo, nusiwo wotsɔ blaa nu, kaɖiwo kple atsyɔ̃ɖonuwo.

• Nuŋlɔtiwo: Nutsyɔnu, mamanuwo, nuŋlɔɖiwo ƒe fesrewo kple ametakpɔnu siwo wotsɔ dea eme.

• Kpekpeɖeŋugbalẽviwo wɔwɔ: Nusiwo wotsɔ tsyɔa nu dzi, nu vevi alo lamination na dzesidegbalẽvi kple etɔxɛ gbalẽviwo.

• Ametakpɔnu nutsyɔnu: Dɔwɔnuwo ƒe nutsyɔnu tsɛ siwo me kɔ kple mɔxenu siwo xea mɔ na tsidzadza siwo ŋu woate ŋu alé wo ɖo nyuie.

• Akaɖi kple atsyɔ̃ɖoɖo: Akaɖi ƒe akpa siwo wowɔ, atsyɔ̃ɖoɖo ƒe nusiwo wotsɔ de eme kple akpa siwo ƒe amadede le keklẽm.

Zi geɖe la, 0.5mm ƒe agbalẽ mesɔ abe agbatsɔƒe, xɔtuɖaŋu ƒe xɔmenuwo ƒe akpa, mɔ̃dzikpɔla gã si wometsɔ kpe ɖo o alo dedienɔnɔ ƒe ahuhɔ̃e si ŋu woɖo kpee ene o.

PETG tsɔ wu APET , Akrilik kple Polycarbonate

Scratch kple Atikewo ƒe Tsitretsitsi

Standard PETG ƒe atikewo ƒe tsitretsitsi ɖea vi na ɖeɖefia, babla kple ewɔwɔ ƒe dɔ geɖe, gake eƒe sɔsɔ nɔ te ɖe atike, eƒe ʋeʋẽ, ɣeyiɣi si woatsɔ ado goe, dzoxɔxɔ kple nuteɖeamedzi le agbalẽa me dzi.

Atike sesẽwo kple dzadzɛnyenyetike siwo mewɔ ɖeka o ate ŋu ana wòazu ɣie, wòazu ʋuʋudedi, avuvu alo nuteɖeamedzi ƒe gbagbã.

Standard PETG menye nusi wofa sesĩe o eye ateŋu avuvu le eŋudɔwɔwɔ me. Ele be ametakpɔnu ƒe nutsyɔnu nanɔ teƒea vaseɖe esime wowu ewɔwɔ alo eɖoɖo nu.

Ele be woazã dɔ siwo hiã be woatrɔ asi le aŋɔ ŋu nyuie wu la be woazã atike si woɖo ɖi si ŋu wofa nu sesẽ alo esi mete ŋu ƒoa nu le o.

PETG Nusiwo Woabu le Gbugbɔgazã Ŋu

Woate ŋu aƒo PETG wɔwɔ ƒe kakɛ siwo le dzadzɛ nu ƒu le mɔ̃ɖaŋununya nu eye woagbugbɔ awɔ dɔ tso wo ŋu le nuwo wɔwɔ ƒe nɔnɔme siwo dzi wokpɔ ŋusẽ ɖo me.

Mele be woaɖɔ PETG le eɖokui si be esɔ bliboe kple PET aŋetu alo PET tray gbugbɔgazã ƒe tɔsisi ɖesiaɖe si sɔ bliboe o.

Gbugbɔgazã ŋutɔŋutɔ nɔ te ɖe nutoa me ƒe nuƒoƒoƒu ƒe ɖoɖo, vovototodedeameme mɔ̃ɖaŋununya, PETG dzesidede, amadedewo, nusiwo wotsɔ blaa nu, ametakpɔnu filmwo, ŋkɔwo, nusiwo wotsɔna léa nu ɖe ​​nu ŋu kple alesi wowɔ nusi wowɔ vɔ la dzi.

Ele be woazã nusi wowɔ vɔ bliboa kple asi si woɖo tae ƒe nusiwo wogbugbɔ zãna ƒe xɔtuɖoɖowo atsɔ ada nusiwo wogbugbɔ zãna ƒe nyawo kpɔ.

Dodokpɔ Siwo Wokafu be Woatsɔ Akpɔ Dzedzeme Dzi

• PETG resin kple grade ƒe kpeɖodzi.

• Titrime kple titrime ƒe mɔɖeɖe ɖe nu ŋu.

• A4, A3 kple didime ƒe mɔɖeɖe ɖe nu ŋu si wowɔ ɖe ɖoɖo nu.

• Squareness, flatness, curl kple nugbɔ ƒe nyonyome.

• Kekeli ƒe kaka, haze, tint kple gloss.

• Teƒe yibɔwo, gel, kuɖɔ, sisi ƒe fliwo kple anyigba ƒe ʋuʋudedi.

• Ametakpɔnu-film ƒe adhesion kple eɖeɖe dzadzɛ.

• Tensile ŋusẽ, elongation kple impact dɔwɔwɔ.

• Vicat ƒe fafa kple dzoxɔxɔ-ʋuʋu ƒe dɔwɔwɔ le afisi wòhiã le.

• Thermoforming fesre, web sag kple dzoxɔxɔ ɖekawɔwɔ.

• Ta goglome, gli-titrime mama kple aŋɔ-titrime gbugbɔgawɔ.

• Formed-part eme kɔ, shrinkage kple didime li ke.

• Ku lãɖeɖe, punching, drilling kple edge-cracking dodokpɔwo.

• Vuvɔ-bɔbɔ, fli-bɔbɔ kple spring-back dodokpɔwo.

• Agbalẽtata ƒe adhesion kple curing ƒe ɖekawɔwɔ.

• Bonding, welding kple atike-tsitretsitsi dodokpɔwo.

• UV-yame ƒe nɔnɔme dodokpɔwo hena gota gome dzesiwo.

• Nuɖuɖu-kadodo alo atikewɔwɔ ŋuti nuŋlɔɖiwo me toto le afisi wòhiã le.

• Nubabla, kakɛ kple pallet me dzodzro.

PETG Agbalẽvi ƒe Tiatiawɔblɔɖe

• Woɖee fia be eƒe titrime nye 0.5mm.

• A4 gbadzɛ siwo ƒe didime nye 210 × 297mm.

• A3 gbadzɛ siwo ƒe didime nye 297 × 420mm.

• Wotrɔ asi le woƒe titrime ŋu tso abe 0.15mm va ɖo 7mm ene.

• Agbalẽvi siwo wotso ɖe woƒe lolome nu kple agbalẽ siwo ƒe nɔnɔme lolo.

• Master rolls kple slit rolls na gauges tsɛ siwo sɔ.

• Amadede siwo me kɔ, siwo me kɔ, siwo me kɔ, siwo me kɔ kple amadede siwo me mekɔ o.

• Glossy, matte, frosted kple embossed anyigbawo.

• Axa ɖeka alo akpa eve ƒe ametakpɔnu ƒe nutsyɔnu.

• Thermoforming, agbalẽtata kple fabrication ƒe dzesiwo.

• UV-si li ke kple UV-coextruded gota grades.

• Nuɖuɖu ƒe kadodo, atikewɔwɔ kple atike siwo ŋu seɖoƒe le ƒe dzesi siwo dzi wokpɔna.

• Antistatic, dzo-tsitretsitsi kple scratch-tsitretsitsi ƒe dzesiwo.

• Nuŋlɔɖi siwo wowɔ ɖe ɖoɖo nu, kakɛwo, palletwo kple agbalẽɖoɖoɖa ƒe dzesiwo.

Nyatakaka Siwo Hiã na PETG Agbalẽvi ƒe Nyayɔyɔ

• Wobia be wòanye titrime kple mɔɖeɖe ɖe nu ŋu.

• A4, A3 alo didime siwo wowɔ ɖe ɖoɖo nu.

• Sheet, roll alo cut-piece nana ƒe nɔnɔme.

• Wobia tso agbalẽ xatsaxatsa ƒe kekeme, agbalẽ xatsaxatsa ƒe didime, nu vevi kple agbalẽ xatsaxatsa ƒe kpekpeme le afisi wòsɔ le.

• Amadede si me kɔ, si ƒe amadede le vovovo, si me kɔ alo esi me mekɔ o.

• Glossy, matte, frosted alo embossed anyigba.

• Axa ɖeka alo akpa eve ƒe ametakpɔnu ƒe nutsyɔnu.

• Kekeli ƒe kaka, afu, amadede alo nukpɔkpɔ ƒe gbɔdzɔgbɔdzɔ ƒe seɖoƒe siwo hiã.

• Thermoforming goglome, aŋɔ ƒe didime kple dɔwɔwɔ dɔwɔnuwo.

• Agbalẽtata, lãɖeɖe, ƒoƒo, tomekuku alo babla ƒe ɖoɖo.

• Xɔme alo gota zazã.

• UV, dzo, antistatic alo scratch-resistant ƒe nɔnɔme siwo hiã.

• Nuɖuɖu-kadodo, atikewɔwɔ alo sedziwɔwɔ ƒe nudidi bubuwo.

• Dodokpɔ ŋuti nyatakaka siwo hiã kple asi si me woayi.

• Gbãtɔ ƒe nudɔdɔ ƒe agbɔsɔsɔme kple ƒe sia ƒe ƒe didi si wobu.

• Packaging, destination port kple ŋkeke si wobia be woatsɔe ayi.

Ðo Wò PETG Agbalẽvi ƒe Nudidiwo ɖa

PETG Mɔ̃ɖaŋu Ŋuti Nyatakakagbalẽvi

To PETG mɔ̃ɖaŋu ŋuti nyatakaka gbalẽvi si li me hena dzɔdzɔmeŋusẽ, nukpɔkpɔ, mɔ̃ɖaŋu, dzoxɔxɔ kple elektrikŋusẽ ƒe nɔnɔme siwo ŋu woƒo nu tsoe.

Hafi nàzã nuŋlɔɖia hena aɖaŋuwɔwɔ, nuƒle alo ɖoɖowɔwɔ ƒe taɖodzinuwo la, ɖo kpe edzi be resin ƒe grade, eƒe titrime, amadede, eƒe anyigba kple teƒe si wowɔe le sɔ kple nusi tututu wotsɔ na wò.

Wɔ PETG Agbalẽvi ƒe Nyatakakagbalẽvi ƒe kɔpi

Nubablɛwo Kple Wo Ðoɖoɖa

A4 kpɔɖeŋu babla: Woate ŋu atsɔ film alo pepa akpɔ A4 agbalẽwo ta eye woabla wo ɖe PP kotokuwo, agbalẽkotokuwo alo kakɛwo me.

A3 agbalẽ babla: Woate ŋu atsɔ ametakpɔnu interleaving aƒo A3 agbalẽwo nu ƒu eye woabla wo ɖe aɖaka sesẽ siwo wotsɔ ɖoa ​​duta me.

Roll packing: Woate ŋu atsɔ PE film, kraft paper kple edge protection abla PETG rolls tsɛwo.

Agbalẽ gãwo ƒe babla: Woate ŋu atsɔ ametakpɔnu film, PE kotokuwo, kraft pepa, dzogoe takpɔnu kple pallet sesẽwo abla agbalẽ gbadzawo.

Pallet packing: Nufiame pallet ƒe kpekpemewo tso abe 500kg va ɖo 2000kg le agbalẽa ƒe didime kple alesi woawɔe nu.

Agbatsɔtsɔ: Agbatsɔtsɔ ƒe agbɔsɔsɔme nɔ te ɖe eƒe titrime, agbalẽa ƒe lolome, agbalẽ xatsaxatsa ƒe didime, pallet ƒe ɖoɖo kple kpekpeme ƒe seɖoƒe siwo le se nu dzi.

Ɣeyiɣi si woatsɔ awɔe: Zi geɖe la, ewɔwɔ si sɔ la bia abe ŋkeke 7-15 ene le esi woɖo kpe adzɔnu ƒe nɔnɔme, kpɔɖeŋu, babla kple fexexe dzi vɔ megbe.

Ðaseɖigbalẽwo Kple Dodokpɔ Ŋuti Nuŋlɔɖiwo

Nuŋlɔɖi siwo li ate ŋu anye atikewo ƒe nɔnɔmewo, mɔ̃ɖaŋu ŋuti nyatakakawo, dedienɔnɔ ŋuti nyatakakawo, atike siwo ŋu seɖoƒe le ŋuti nyatakakawo, nuɖuɖu ƒe kadodo ŋuti nyatakakawo kple nyonyome dzikpɔkpɔ ŋuti ɖaseɖigbalẽwo.

Ele be woaɖo kpe nuŋlɔɖi ɖesiaɖe dzi le PETG ƒe dzeside tututu, eƒe titrime, amadede, eƒe anyigba ƒe nuwuwu, teƒe si wowɔe le kple alesi woɖoe be wòazãe.

Ele be woaɖɔ SGS le dodokpɔ ŋutɔŋutɔ si wowu enu nu eye mele be woatsɔe afia abe xexeame katã ƒe adzɔnuwo ƒe ɖaseɖigbalẽ ene o.

Ele be woalé ŋku ɖe nyonyomedzikpɔkpɔ ƒe ɖaseɖigbalẽ ɖesiaɖe ƒe tata si sɔ, ɖaseɖigbalẽa tɔ, afisi wòakeke ɖo kple eƒe dɔwɔwɔ ƒe ɣeyiɣi ŋu hafi woatae.

HSQY Xexeame Katã ƒe Nukpɔkpɔwo

Nukatae Nàtia HSQY abe Wò PETG Agbalẽvi Dɔwɔƒe?

• Featured 0.5mm me kɔ PETG agbalẽ.

• Standard A4 kple A3 cut-sheet ƒe lolomewo.

• Trɔ asi le titrime, agbalẽwo kple agbalẽ xatsaxatsa ƒe nɔnɔmewo ŋu.

• Nusiwo me kɔ, siwo ƒe amadede le vovovo, siwo me tsikpe le, esiwo me matte kple amadede le.

• Thermoforming, agbalẽtata kple fabrication ƒe dzesiwo.

• Kpɔɖeŋu siwo woatsɔ awɔ dodokpɔ, tata kple lãɖeɖe.

• Ametakpɔnu ƒe ametakpɔnu si wowɔ ɖe ɖoɖo nu kple subɔsubɔdɔ siwo wotso ɖe woƒe lolome nu.

• UV, nuɖuɖu-kadodo kple etɔxɛ ƒe dzesiwo nenye be woda asi ɖe edzi.

• Dzɔdzɔmeŋutete me dzodzro le nɔnɔme tɔxɛ siwo dzi woda asi ɖo nu.

• Kakɛ siwo wowɔ ɖe ɖoɖo nu, pallets kple export packing.

• Dukɔwo dome nyawo ɖoɖoɖa kple nuŋlɔɖiwo wɔwɔ ƒe kpekpeɖeŋu.

Hafi woawɔ nu geɖe la, HSQY ɖo aɖaŋu be woado PETG agbalẽvi si wotia la kpɔ le asisi la ƒe dzoxɔxɔ ƒe nɔnɔme, agbalẽtata, lãɖeɖe, ƒoƒo alo babla dɔwɔnu ŋutɔŋutɔ dzi.

Te ɖe HSQY ŋu hena Kpɔɖeŋuwo kple Asixɔxɔ

Nya Siwo Wobiaa Enuenu Ku Ðe PETG Agbalẽvi Siwo Me Kɔ Ŋu

Nukae nye PETG agbalẽ?

PETG nye copolyester gbadzɛ si me kɔ si wotsɔ glycol trɔ asi le si wozãna na dzoxɔxɔ ƒe wɔwɔme, ɖeɖefiawo, babla, agbalẽtata kple akpa siwo wowɔ.

Nukae nye A4 PETG ƒe agbalẽ ƒe lolome?

A4 PETG ƒe agbalẽ si wozãna ɖaa ƒe didime nye 210 × 297mm.

Nukae nye A3 PETG ƒe agbalẽ ƒe lolome?

A3 PETG ƒe agbalẽ si wozãna ɖaa ƒe didime nye 297 × 420mm.

Ðe agbalẽ si woɖe fia la ƒe titrime nye 0.5mm pɛpɛpɛa?

Ɛ̃. Nusi woɖe fia la ƒe titrime le ŋkɔ me nye 0.5mm alo 500 microns.

PETG ƒe titrime bubu kawoe li?

PETG ƒe titrime siwo wowɔ ɖe ɖoɖo nu tso abe 0.15mm va ɖo 7mm ene li, le nusiwo woatsɔ ana ƒe ɖoɖo kple dɔwɔwɔ nu.

Ðe woate ŋu awɔ 0.5mm PETG le vacuum mea?

Ɛ̃. Woate ŋu awɔe le vacuum me wòazu nubablɛ siwo le bɔbɔe, kpɔɖeŋuwo, nutsyɔnuwo kple kpɔɖeŋu ƒe akpawo le dzoxɔxɔ kple aŋɔ ƒe nɔnɔmewo nyonyo vɔ megbe.

Ðe PETG hiã be woaƒui do ŋgɔ hafi awɔ dzoxɔxɔ ƒe nɔnɔmea?

Woateŋu awɔ PETG agbalẽ ƒe hatsotso geɖe evɔ womaƒu wo do ŋgɔ o ne wodzra wo ɖo nyuie, gake ele be woawɔ ɖe nudzrala ƒe mɔfiame siwo ku ɖe dɔwɔwɔ ŋu kple tsi ƒe nɔnɔme ŋutɔŋutɔ dzi.

Dzoxɔxɔ ƒe dzoxɔxɔ kae wòle be woazã?

Dzoxɔxɔ si sɔ si woatsɔ awɔe la nɔ te ɖe PETG ƒe dzeside, eƒe titrime, dzoxɔxɔnamɔ̃, aŋɔ, nuwɔwɔ ƒe goglome kple ɣeyiɣi si wotsɔ ƒoa xlãe dzi. Ele be dodokpɔ siwo woawɔ le ewɔwɔ me naɖo fesre si woate ŋu azã le wɔwɔme la anyi.

Ðe woate ŋu atsɔ lãgbalẽŋudɔwɔnu alo hɛ atso PETG agbalẽa?

Woate ŋu atso PETG tsɛwo to lãgbalẽŋudɔwɔnu siwo sɔ, hɛwo alo guillotines zazã me. Ele be woazã dɔwɔnu siwo dzi wokpɔna le nuwɔwɔ ƒe lãɖeɖe me be woalé didime kple goawo dzadzɛ.

Ðe woate ŋu atso PETG ahaƒoea?

Ɛ̃. PETG ateŋu atso ku eye woaƒoe to dɔwɔnu ƒe ʋuʋu si sɔ, nugbɔ ƒe didime kple agbalẽ ƒe kpeɖeŋutɔ zazã me.

Ðe woate ŋu abɔbɔ PETG dzoxɔxɔ manɔmeea?

PETG ateŋu abɔbɔ vuvɔ ne eƒe titrime, nu ƒe grade kple bend radius sɔ. Ele be woado afisiwo wobɔbɔ sesĩe la kpɔ be wole ɣie eye wole spring-back hã.

Ðe woate ŋu aku PETG agbalẽa?

Ɛ̃. Zã dɔwɔnu ɖaɖɛwo, nuɖuɖu ƒe agbɔsɔsɔme si dzi wokpɔna, kpekpeɖeŋu si sɔ kple didime si sɔ le dowo kple agbalẽa ƒe gowo dome.

Ðe woate ŋu ata PETG agbalẽvia?

Woateŋu ata PETG ƒe dzesi tiatia aɖewo ɖe screen dzi, ata wo, atre dzoxɔxɔ nu alo ata wo to dijitaal dzi le ink, adhesion kple curing dodokpɔwo megbe.

Ðe PETG sɔ na UV tata?

Woateŋu ata PETG ƒe dzesi aɖewo to dijitaal dzi UV, gake ŋusẽ si daa gbe le ame ŋu kple ink ƒe atikewɔwɔ ateŋu akpɔ ŋusẽ ɖe nusi wotsɔ wɔe dzi. Ele be woadoe kpɔ hafi awɔe.

Ðe PETG te ŋu nɔa te ɖe ŋusẽkpɔɖeamedzi nu wu acrylica?

PETG zi geɖe naa tsitretsitsi ɖe ŋusẽkpɔɖeamedzi ŋu si lolo wu kple tsitretsitsi ɖe ʋuʋudedi ŋu geɖe wu acrylic si wozãna ɖaa, togbɔ be dɔwɔwɔ tututu nɔ te ɖe grade, titrime kple dodokpɔ mɔnu dzi hã.

Ðe PETG sesẽ wu polycarbonate?

Zi geɖe la, polycarbonate naa ŋusẽkpɔɖeamedzi kple dzoxɔxɔ ƒe dɔwɔwɔ si lolo wu, gake zi geɖe la PETG ƒe dzoxɔxɔ kple ewɔwɔ nɔa bɔbɔe wu le dɔwɔwɔ ƒe dzoxɔxɔ si bɔbɔ wu me.

Ðe PETG agbalẽa ƒe ʋuʋu te ŋu nɔa te ɖe enua?

Standard PETG ateŋu aƒo nu le eŋudɔwɔwɔ me. Ele be woazã ametakpɔnu si wotsɔ tsyɔa nu ame dzi alo nusi wotsɔ tsyɔ nu sesẽ aɖe koŋ dzi ne tsitretsitsi ɖe abrasion ŋu le vevie.

Ðe woate ŋu azã PETG le gotaa?

Wokafu standard PETG koŋ na xɔme zazã. Gota zazã ɣeyiɣi didi bia be woatsɔ UV-si li ke alo UV-coextruded grade.

Ðe PETG sɔ na dzoxɔxɔ gã ƒe dɔwɔwɔwoa?

PETG ƒe dzoxɔxɔ ƒe tsitretsitsi le titina eye mele be woatiae le eɖokui si na dzoxɔxɔ gã ƒe dɔwɔwɔ ɣeyiɣi didi o. Ele be woato fafa kple dzoxɔxɔ ƒe ʋuʋu ƒe asixɔxɔ siwo sɔ me.

Ðe PETG nuɖuɖu si wotsɔ agbalẽ wɔe le dediea?

Woateŋu ana nuɖuɖu-kadodo PETG ƒe dzesi tɔxɛ aɖe ne eƒe aŋɔ, nusiwo wotsɔ kpe ɖe eŋu kple nuŋlɔɖiwo sɔ na asi si me woayi kple nɔnɔme siwo me woazãe le.

Ðe woate ŋu azã PETG na atikewɔnuwoa?

Atikewɔwɔ me dɔdasiwo bia be woatsɔ dzeside si sɔ eye woaɖo kpe dzadzɛnyenye, wo yometiti, dɔlékuiwutikewo zazã, nugbagbewo ƒe dɔwɔwɔ ɖekae kple nusiwo wowɔ vɔ ƒe dɔwɔwɔ dzi.

Ðe woate ŋu agbugbɔ PETG awɔ dɔa?

PETG ateŋu agbugbɔ awɔ dɔ le mɔ̃ɖaŋununya me, gake sɔsɔ kple nutoa me PET gbugbɔgazã ƒe ɖoɖowo to vovo. Ele be woada adzɔnu bliboa kple afisi woayi-asi ƒe xɔtuɖoɖowo kpɔ.

Ðe ametakpɔnu ƒe film le agbalẽa mea?

Woate ŋu ana ametakpɔnu si le axa ɖeka alo akpa eve na titrime tiatia kple dɔwɔwɔ.

Ðe HSQY ate ŋu atso PETG agbalẽwo ɖe lolome si wowɔ ɖe ɖoɖo nu nua?

Ɛ̃. A4, A3, agbalẽ siwo wotso ɖe ɖoɖo nu, agbalẽ gbadza gã siwo le gbadzaa kple agbalẽ xatsaxatsa ƒe kekeme tiatia aɖewo li.

Nukae nye nudɔdɔ ƒe agbɔsɔsɔ suetɔ kekeake?

MOQ si wozãna le agbɔsɔsɔ gã me si wozãna ɖaa la ade 1000kg. Ele be woaƒo nu tso nudzraɖoƒe ƒe kpɔɖeŋuwo kple dodokpɔ ƒe agbɔsɔsɔme ŋu ɖe vovo.

Ðe PETG kpɔɖeŋuwo li femaxeea?

A4 alo esiwo wotso ƒe kpɔɖeŋu siwo li fifia ate ŋu anɔ anyi nuwo ƒe fe aɖeke maxɔmaxɔe, evɔ zi geɖe la, asisi lae xea dukɔwo dome agbatsɔʋuwo ƒe agbawo.

Nukae nye ɣeyiɣi si woatsɔ awɔe?

Zi geɖe la, ewɔwɔ si wozãna ɖaa xɔa abe ŋkeke 7-15 ene le esi woɖo kpe eƒe nɔnɔme, kpɔɖeŋu, babla kple fexexe dzi vɔ megbe.

Nyatakaka kawoe hiã hafi woate ŋu ayɔ nyayɔyɔ?

Na titrime, A4, A3 alo custom lolome, nana ƒe nɔnɔme, amadede, anyigba, ametakpɔ film, dɔwɔwɔ, dɔwɔwɔ mɔnu, agbɔsɔsɔme, packing kple yiyi.

Na PETG Agbalẽvi ƒe Nyayɔyɔ si Wotrɔ Asi Le

Ku ɖe HSQY Plastic Group ŋu

HSQY Plastic Group naa PETG agbalẽ siwo me kɔ, PETG agbalẽ xatsaxatsa, APET agbalẽwo, GAG agbalẽwo, PET thermoforming agbalẽwo, PVC agbalẽwo, PP agbalẽwo kple plastic nusiwo wowɔ ɖe ɖoɖo nu na dukɔwo dome B2B asisiwo.

HSQY doa alɔ thermoforming dɔwɔƒewo, nubablɛwo trɔlawo, kpɔɖeŋu nudzralawo, dzesiwo wɔlawo, agbalẽtalawo, plastic fabricators, sukuwo, importers kple mamalawo kple kpɔɖeŋu ƒe dodokpɔ, customized wɔwɔ, nyonyome me toto kple export packaging.

Bia Nya Siwo Woagblɔ Kple Kpɔɖeŋu