Frosted Pvc Thin Plastik agbalẽ

Frosted PVC Tsitsetse Plastik agbalẽ Dɔwɔƒe

HSQY wɔa frosted PVC plastic tsɛ agbalẽ dzi nyawo s kple matte rigid PVC filmwo hena agbalẽtata, aɖaka siwo wobla, blister packaging, agbalẽŋlɔnuwo, kaɖiwo, asitsaƒewo ƒe ɖeɖefiawo, atsyɔ̃ɖonuwo kple dɔwɔƒewo ƒe tɔtrɔ.

Titrime siwo li la tso abe 0.06mm va ɖo 2mm ene. Woateŋu ana nɔnɔme tsɛwo abe agbalẽ xatsaxatsa alo lãɖeɖe agbalẽ dzi nyawo s ene, gake zi geɖe la, wotsɔa nɔnɔme siwo le kpekpem wu abe agbalẽ dzi nyawo s gbadzawo ene le kekeme, didime kple anyigba ƒe nuwuwu si wobia nu.

Anyigba si dzi tsikpe le la ɖea keklẽ si me kɔ tẽ dzi kpɔtɔna, eɖea asibidɛ siwo woate ŋu akpɔ la dzi kpɔtɔna eye wònana wòdzena abe ɖe wòklẽna ene esime wònaa kekeli si va la ƒe akpa aɖe toa eme.

Nusiwo li ƒe anyigbadzinuwo ƒokpli dometɔ aɖewoe nye matte/matte, matte/glossy, fine frosted, coarse frosted, velvet/matte, embossed kple customized textured nuwuwu.

Amadede siwo wozãna ɖaa dometɔ aɖewoe nye amadede siwo me kɔ si me tsikpe le, ɣi si me kɔ kple amadede tiatia siwo me kɔ. Woate ŋu ada amadede ɣi, yibɔ kple esiwo wowɔ ɖe ɖoɖo nu hã kpɔ le woƒe titrime si hiã kple agbɔsɔsɔ si wobia nu.

Agbalẽtata, aɖaka si wobla, dzoxɔxɔ ƒe nɔnɔme, UV-si li ke, antistatic kple flame-retardant PVC agbalẽ dzi nyawo s hiã na atike siwo wozãna koŋ. Ele be woatsɔ nɔnɔme siawo ade nɔnɔme si dzi woda asi ɖo me tsɔ wu be woasusui na tsikpe PVC ƒe dzesi ɖesiaɖe.

Ne èdi nusiwo woate ŋu ata siwo do ƒome kplii la, kpɔ... HSQY PVC tata agbalẽ dzi nyawo ƒe didime.

Bia Frosted PVC ƒe Agbalẽ Asixɔxɔ    Bia Anyigba ƒe Kpɔɖeŋuwo

Nukae Nye Frosted PVC Tsã Plastik agbalẽ ?

Plastik tsɛ si wotsɔ tsikpe wɔe PVC agbalẽ dzi nyawo nye polyvinyl chloride nu sesẽ alo esi sesẽ afã kple afã si ƒe anyigba le matte si ƒe nɔnɔme le abe matte ene si kakaa kekeli si woɖena fiana eye wòtsɔna yina.

To vovo na PVC si me kɔ nyuie la, tsikpe ƒe anyigba naa keklẽ si bɔbɔ ɖe anyi wu eye wòɖea nukpɔkpɔ tẽ dzi kpɔtɔna to agbalẽ dzi nyawo dzi.

Le alesi wowɔa nuawoe nu la, woate ŋu atsɔ tsikpe aƒu gbe ɖe nuawo ƒe akpa ɖeka alo akpa eveawo siaa.

Akpa ɖeka ƒe tsikpe PVC ƒoa matte anyigba kple megbekpa si le gbadzaa alo si le keklẽm wu nu ƒu, gake axa eve ƒe tsikpe PVC naa nɔnɔme si me keklẽ mele o le anyigba eveawo dzi.

Wogaɖɔ PVC si wotsɔ tsikpe wɔe be matte PVC agbalẽ dzi nyawo , film si me kɔ PVC , sanded PVC agbalẽ dzi nyawo , matte vinyl si me kɔ, vinyl si me tsikpe le sesẽ kple textured transparent PVC film.

Frosted PVC ƒe Agbalẽ Nɔnɔmetatawo

Frosted PVC ƒe Agbalẽ Nusiwo wogblɔ

Ele be woaɖo kpe titrime mamlɛtɔ ƒe mɔɖeɖe, didime, anyigba ƒe nɔnɔme, keklẽ, afu, kekeli ƒe kaka, amadede, sesẽ, agbalẽtata ƒe dɔwɔwɔ kple nɔnɔme tɔxɛwo dzi le nuŋlɔɖi si dzi woda asi ɖo me.

PVC Film vs. PVC Agbalẽvi Tsɛ aɖe

Titrime ƒe didime siawo nye tiatia ƒe mɔfiame siwo bɔ. Sesẽme si hiã, asitɔtrɔ le nɔnɔmewo ŋu kple wɔwɔme ƒe dɔwɔwɔ nɔ te ɖe PVC ƒe wɔwɔme kple nusiwo wowɔ vɔ ƒe nɔnɔme dzi.

Akpa Ðeka Kple Axa Eve Frosted PVC

Kekeli ƒe Gbeƒãɖeɖe, Haze kple Adzamenyawo

Frosted PVC na kekeli to eme esime wòle nusiwo le megbe na agbalẽ dzi nyawo ƒe dzedzeme dzi ɖem kpɔtɔ.

Nukpɔkpɔ ƒe emetsonu ŋutɔŋutɔ nɔ te ɖe agbalẽ dzi nyawo ƒe titrime, anyigba ƒe ƒuƒuiƒe, amadede, didime tso nusi gbɔ, kekeli ƒe mɔfiame kple keklẽ le akpa ɖesiaɖe dzi.

Ele be nuƒlela siwo hiã be woakpɔ nukpɔkpɔ ƒe dɔwɔwɔ dzi la nagblɔ kekeli si wokpɔna ƒe kaka, afu, eme kɔ, keklẽ kple amadede ƒe tɔtrɔ si dzi woda asi ɖo.

A general frosted finish menaa adzame blibo, calibrated LED kaka alo kakaɖedzi hotspot ɖeɖeɖa le eɖokui si o.

Le ameŋunyatakakawo ŋuti nyatakakawo gome la, ele be asisi la nada kpɔɖeŋuwo kpɔ le didiƒe si woɖo be woakpɔe kple akaɖi ƒe nɔnɔmewo nu.

Agbalẽtata le Frosted PVC ƒe Agbalẽ dzi.

Wozãa frosted rigid PVC geɖe na agbalẽvi siwo wota, boblododo ɖeɖefiawo, nubablɛwo, nuɖuɖuwo, agbalẽdzraɖoƒe ƒe dzesiwo kple atsyɔ̃ɖoɖo ƒe nɔnɔmetatawo.

Ele be asisiwo nado nuŋlɔtsi ƒe ɖoɖo ŋutɔŋutɔ kpɔ elabena agbalẽtata ƒe dɔwɔwɔ ate ŋu ato vovo le akpa si wotsɔ tsikpe wɔe kple akpa si wowɔ nyuie dome.

Frosted PVC na Aɖaka Siwo Woate Ŋu Abla

Woateŋu atso PVC si wotsɔ tsikpe wɔe, axɔ dzesi eye woaƒoe ɖe aɖaka siwo me kɔ nyuie me hena atsyɔ̃ɖonuwo, nunanawo, agbalẽŋlɔnuwo, elektrɔniknuwo kple boblododonuwo.

Matte-wua ate ŋu aɖe asibidɛwo ƒe dzesiwo dzi akpɔtɔ eye wòana wòadze fa wu nusiwo wotsɔ blaa nu siwo me kɔ bliboe.

Folding ƒe dɔwɔwɔ nɔ te ɖe titrime, resin ƒe wɔwɔme, agbalẽ dzi nyawo ƒe nɔnɔme, crease-rule ƒe didime kple dɔwɔwɔ ƒe dzoxɔxɔ dzi.

Ele be woada ewɔwɔ ƒe kpɔɖeŋua kpɔ hena folding whitening, cracking, spring-back, glue adhesion kple ultrasonic alo high-frequency welding compatibility.

Frosted PVC na Blister Packaging kple Thermoforming

Woate ŋu awɔ thermoforming-grade frosted PVC wòazu blister packs, nusiwo wotsɔ dea nuawo me, nutsyɔnuwo, traywo dzi kple atsyɔ̃ɖonuwo.

Ele be dzoxɔxɔ ƒe dzoxɔxɔ, wɔwɔɣi, aŋɔ ƒe dzoxɔxɔ, nutata ƒe goglome, fafa kple agbalẽ dzi nyawo ƒe nɔnɔme nanyo ɖe edzi na titrime si wotia.

Nutata goglo ate ŋu atrɔ tsikpe ƒe nɔnɔme kple eƒe kpekpeme, vevietɔ le teƒe siwo keke ŋutɔ.

Ele be nuƒlelawo nado akpa si wowɔ la akpɔ hena gli-titrime mama, eme kɔ ƒe tɔtrɔ, nɔnɔme ƒe léle ɖe te kple didime ƒe liƒo.

Frosted PVC Agbalẽvi Tsɛwo ƒe Dɔwɔwɔwo

• Agbalẽtata: Dodoɖeŋgɔ ƒe nɔnɔmetatawo, kaɖiwo, nuɖuɖuwo, ŋkɔwo, nusiwo wotsɔ tsyɔ wo dzi kple nusiwo woɖena fiana le teƒe si woƒlee.

• Aɖaka siwo woate ŋu abla: Atsyɔ̃ɖonu siwo me kɔ, nunana, agbalẽŋlɔnuwo kple asitsaƒewo ƒe agbawo.

• Blister packaging: Thermoformed packaging na nuzazãwo, dɔwɔnuwo, elektrɔnikmɔ̃wo kple kpeɖeŋutɔwo.

• Nuŋlɔɖiwo: Nuŋlɔɖigbalẽwo ƒe akpawo, agbalẽdzraɖoƒewo, mamawo, nyatakakawo ƒe akpawo kple nuŋlɔɖiwo ƒe gakotokuwo.

• Asitsaƒewo ƒe ɖeɖefiawo: Dzesi siwo le agbalẽdzraɖoƒe, nusiwo wotsɔ dea nu nu me, boblododo ƒe akpawo kple nusiwo woama.

• Atsyɔ̃ɖoɖo ƒe akpawo: Xɔmenuwo ƒe nusiwo wotsɔ dea eme, akaɖi ƒe akpa aɖewo kple xɔmenuwo ƒe atsyɔ̃ɖoɖo siwo me kɔ nyuie.

• Ame ŋutɔ ƒe nyawo tsɔtsɔ de eme: Akpa siwo wotsɔ xɔtunu wɔ alo esiwo ŋu wodo alɔe siwo ɖea mɔ na kekeli ƒe kaka esime woɖea nukpɔkpɔ tẽ dzi kpɔtɔna.

• Dɔwɔƒewo ƒe tɔtrɔ: Die-cut akpawo, ametakpɔnu overlays, liners kple custom formed akpawo.

Frosted PVC tsɔ wu PET , PP kple Acrylic

Xɔme, Gbedoxɔ Kple Etɔxɛ PVC Dzesidewo

Mele be woaɖɔ standard frosted PVC le eɖokui si be etsi tre ɖe gota tegbee, antistatic, dzo mate ŋu age o alo esɔ na dɔwɔwɔ ɖesiaɖe si ŋu wowɔ ɖoɖo ɖo o.

Lãɖeɖe, Fabrication kple Dedienɔnɔ

• Woate ŋu atsɔ lãgbalẽŋudɔwɔnu siwo sɔ, hɛwo, lãgbalẽŋudɔwɔnuwo kple guillotine dɔwɔnuwo atso PVC tsɛwo.

• Woate ŋu atso agbalẽawo le ku me, aƒo wo, aku wo eye woatsɔ mɔ̃ akplɔ wo to dɔwɔnu siwo sɔ zazã me.

• Ele be dɔwɔnu si wotsɔ lãa nu la naɖa be wòaɖe ʋuʋudedi, gbagbã kple nuteɖeamedzi ƒe ɣie dzi akpɔtɔ.

• Ele be woado dzesi ƒe fliwo kple afisi woblaa nu ɖo hafi awɔ folding-box.

• Ele be woazã dzoxɔxɔ si dzi wokpɔna kple ya si sɔ na dzoxɔxɔ wɔwɔ.

• Ele be woatia kadodo kple welding mɔnuwo le PVC ƒe wɔwɔme kple dɔwɔwɔ si wowu enu nu.

• PVC mele be woatsɔ laser lãɖeɖe alo laser nuŋɔŋlɔ dɔwɔnu dzrowo awɔ dɔe o.

Dodokpɔ Siwo Wokafu be Woatsɔ Akpɔ Dzedzeme Dzi

• PVC resin kple additive ƒe kpeɖodzi.

• Titrime kple titrime ƒe mɔɖeɖe ɖe nu ŋu.

• Kekeme, didime kple diagonal tolerance.

• Sheet flatness, roll curl kple winding ƒe nyonyome.

• Frosted texture ƒe ɖekawɔwɔ.

• Anyigba ƒe keklẽ kple eƒe ƒuƒuiƒe.

• Kekeli ƒe kaka, ahomya kple eme kɔ le afisi wogblɔe le.

• Amadede kple amadede ƒe ɖekawɔwɔ tso hatsotso ɖeka me.

• Kristmas ƒe teƒewo, kuɖɔwo, sisi ƒe fliwo, teƒe yibɔwo kple ɖiƒoƒowo.

• Tensile, ŋusẽkpɔɖeamedzi kple folding dɔwɔwɔ.

• Agbalẽtata ƒe adhesion kple scratch tsitretsitsi.

• Die-cutting, scoring kple fold-whitening dodokpɔwo.

• Dzoxɔxɔ ƒe wɔwɔme kple didime-li ke dodokpɔwo.

• Antistatic dodokpɔ le afisi wòhiã le.

• UV-yame ƒe nɔnɔme dodokpɔ hena gotagome dzesiwo.

• Dzoxɔxɔ ƒe dodokpɔ hena dzotsitsi ƒe dzesi siwo woɖo ɖi.

• Ametakpɔnu-film ƒe adhesion kple eɖeɖe dodokpɔwo.

• Packing, pallet kple nugoe-agbawo me dzodzro.

Trɔ asi le Frosted PVC ƒe Agbalẽ Tiatiawɔblɔɖewo

• Eƒe titrime tso abe 0.06mm va ɖo 2mm ene.

• Master rolls, slit agbalẽ xatsaxatsawo kple gbadzaa agbalẽ dzi nyawo s.

• agbalẽ dzi nyawo didime siwo woɖo ɖi kple esiwo wowɔ ɖe ɖoɖo nu.

• Amadede ɣi siwo me kɔ, siwo me kɔ, siwo me kɔ eye wotrɔ asi le wo ŋu.

• Axa ɖeka ƒe tsikpe kple axa eve ƒe anyigba siwo dzi tsikpe le.

• Matte/matte, matte/glossy kple velvet/matte ƒe ƒuƒoƒo.

• Frosted textures nyui, titina kple coarse.

• Agbalẽtata, folding-box kple thermoforming ƒe dzesiwo.

• UV-si li ke, antistatic kple dzo-xe mɔ na atikewo.

• Axa ɖeka alo axa eve ƒe ametakpɔnu film.

• Lãɖeɖe ɖe lolome nu, agbalẽ dzi nyawo ing, slitting kple die-cutting subɔsubɔdɔwo.

• Wotrɔ asi le ŋkɔwo, kakɛwo, palletwo kple agbalẽɖoɖoɖa ƒe dzesiwo ŋu.

Nyatakaka Siwo Hiã Na Frosted PVC ƒe Agbalẽ Nyayɔyɔ

• Wobia be wòanye titrime kple mɔɖeɖe ɖe nu ŋu.

• Roll ƒe kekeme alo agbalẽ dzi nyawo ƒe didimewo.

• Roll, agbalẽ dzi nyawo alo lãɖeɖe-nuzazã ƒe nɔnɔme.

• Amadede si me kɔ, ɣi, yevu alo esi wowɔ ɖe ɖoɖo nu.

• Axa ɖeka alo axa eve ƒe anyigba si dzi tsikpe le.

• Frosted texture nyui, titina alo coarse.

• Kekeli ƒe kaka si hiã, haze alo gloss.

• Agbalẽtata dɔwɔnuwo, ink kple curing mɔnu.

• Folding, die-cutting alo thermoforming ƒe mɔnu.

• Xɔme alo gota zazã.

• Antistatic, dzotsitsi alo UV ƒe nudidiwo.

• Ametakpɔnu-film ƒe nudidi.

• Dodokpɔ ŋuti nyatakaka siwo hiã kple asi si me woayi.

• Nudɔdɔ ƒe agbɔsɔsɔ gbãtɔ kple ƒe sia ƒe ƒe agbɔsɔsɔme si wobu.

• Nubablɛ, melidzeƒe si woɖo tae kple ŋkeke si dzi woatsɔe vɛ.

Ðo Wò Frosted PVC ƒe Agbalẽ Nudidiwo ɖa

Ɣeyiɣi si Woatsɔ Akplɔ Frosted PVC ƒe Agbalẽ s

Ɣeyiɣi si woatsɔ awɔ dɔe dzea egɔme ne woɖo kpe eƒe titrime, eƒe didime, eƒe goglome, eƒe amadede, eƒe babla, fexexe kple kpɔɖeŋu si dzi woda asi ɖo dzi vɔ.

Nubablɛwo Kple Wo Ðoɖoɖa

Kpɔɖeŋuwo ƒe babla: Woate ŋu abla A4 agbalẽ dzi nyawo s kple kpɔɖeŋu sue siwo wotso ɖe ametakpɔnu kotokuwo kple kakɛwo me.

Roll packing: Woate ŋu atsɔ PE film, kraft paper alo ametakpɔnu si wowɔ ɖe ɖoɖo nu abla film rolls tsɛwo.

Sheet packing: Woateŋu akpɔ agbalẽ dzi nyawo s gbadzawo ta kple PE kotokuwo, kraft paper, ametakpɔnu dzogoewo kple pallet sesẽwo.

Takpɔkpɔ le anyigba dzi: Woate ŋu atsɔ ametakpɔnu awɔ akpa ɖeka alo evea siaa na atike tiatia aɖewo.

Pallet packing: Woate ŋu atrɔ asi le plywood alo pallet siwo me fumigation mele o ŋu le agbalẽ dzi nyawo ƒe lolome kple wo ŋudɔwɔwɔ ƒe nudidiwo nu.

Agbatsɔtsɔ: Agbatsɔtsɔ ƒe agbɔsɔsɔme nɔ te ɖe nusi wowɔ ƒe titrime, agbalẽ dzi nyawo ƒe lolome, agbalẽ xatsaxatsa ƒe didime, pallet ƒe ɖoɖo kple kpekpeme ƒe seɖoƒe siwo le se nu dzi.

Mɔ̃ɖaŋu Ŋuti Nyatakakawo Kple Dodokpɔ Ŋuti Nyatakakawo

Dzro PVC nyatakaka siwo me kɔ agbalẽ dzi nyawo agbalẽ dzi nyawo siwo li me hena nyatakaka bliboa kple dɔwɔwɔ ŋuti nyatakakawo.

   Wɔ PVC ƒe agbalẽ si me kɔ Nyatakakagbalẽvi ƒe kɔpi

Dzro PVC agbalẽ dzi nyawo dodokpɔ ƒe nyatakaka si li me hena dodokpɔwo kple adzɔnuwo ŋuti nyatakaka siwo le nyatakaka tɔxɛ ma me.

   Wɔ PVC ƒe Agbalẽ Dodokpɔ Ŋuti Nyatakaka ƒe kɔpi

Ele be nuƒlelawo naɖo kpe edzi be nyatakaka ɖesiaɖe agbalẽ dzi nyawo alo nyatakaka ɖesiaɖe ku ɖe PVC ƒe dzeside, titrime, amadede, anyigba ƒe nuwuwu, teƒe si wowɔe kple dɔwɔwɔ si woɖo be woawɔ ŋu.

Nukatae Nàtia HSQY abe Wò Frosted PVC ƒe Agbalẽ Nudzrala ene?

• Eƒe titrime tso abe 0.06mm va ɖo 2mm ene.

• Master rolls, slit agbalẽ xatsaxatsawo kple gbadzaa agbalẽ dzi nyawo s.

• Axa ɖeka kple axa eve ƒe anyigba siwo dzi tsikpe le.

• Nu nyui, ƒuƒui, matte, velvet kple embossed textures.

• Amadede siwo me kɔ, siwo me kɔ eye wotrɔ asi le wo ŋu.

• Agbalẽtata, folding-box kple thermoforming ƒe dzesiwo.

• Kpɔɖeŋuwo na agbalẽtata, babla kple nukpɔkpɔ ƒe dodokpɔ.

• Lãɖeɖe ɖe lolome nu, slitting kple agbalẽ dzi nyawo ing support.

• Dekɔnu ametakpɔnu film kple export packaging.

• Dzodzro le nɔnɔme tɔxɛ siwo dzi woda asi ɖo ŋu.

Hafi woawɔe le agbɔsɔsɔ gã me la, HSQY ɖo aɖaŋu be woado frosted PVC agbalẽ dzi nyawo si wotia la kpɔ to asisi la ƒe agbalẽtamɔ̃ ŋutɔŋutɔ, ink, die-cutting tool, folding process, thermoforming machine kple finished-product design zazã me.

Te ɖe HSQY ŋu hena Kpɔɖeŋuwo kple Asixɔxɔ

Nya Siwo Wobia Enuenu Tso Frosted PVC ƒe Agbalẽ s

Nukae nye aŋe tsɛ si wotsɔ tsikpe wɔe PVC agbalẽ dzi nyawo ?

Enye PVC film alo agbalẽ dzi nyawo si sesẽ alo esi sesẽ afã kple afã si ƒe anyigba si me kɔ si me woŋlɔ nu ɖo si me kɔ si ɖea keklẽ kple nukpɔkpɔ tẽ dzi kpɔtɔna.

Vovototo kae le frosted kple matte dome PVC ?

Zi geɖe la, wozãa nyaawo ɖe wo nɔewo yome. Ele be woaɖe dzedzeme tututu gɔme to anyigba ƒe kpɔɖeŋu, keklẽ, ƒuƒuiƒe, afu kple kekeli ƒe kaka ƒe nudidiwo dzi.

Titrime kawoe li?

HSQY naa frosted PVC tso abe 0.06mm va ɖo 2mm ene.

Ðe nusiwo le 0.25mm te nye agbalẽ dzi nyawo alo filma?

Wogblɔna zi geɖe be nu tsɛ siwo nɔa anyi ɖaa si le anyime abe 0.25mm ene be film, togbɔ be asitsatsa ƒe ŋkɔwo toa vovo le asi nu hã.

Ðe akpa ɖeka ƒe tsikpe PVC lia?

Ɛ̃. Akpa ɖeka ate ŋu anye esi me tsikpe le esime akpa si le megbe la le gbadzaa alo le keklẽm wu.

Ðe axa eve ƒe tsikpe PVC lia?

Ɛ̃. Woate ŋu awɔ amadede siwo nye matte alo frosted textures le go eveawo siaa dzi.

Ðe woate ŋu atrɔ asi le tsikpe si wotsɔ ƒo ƒui ƒe nɔnɔme ŋua?

Woate ŋu ada eƒe anyigba ƒe ŋusẽkpɔɖeamedzi nyui, titina, ƒuƒui, velvet kple embossed ƒe ŋusẽkpɔɖeamedziwo kpɔ le kpɔɖeŋu si dzi woda asi ɖo nu.

Ðe woate ŋu ata frosted PVC a?

Ɛ̃. Ate ŋu ado alɔ screen, offset, UV inkjet kple tiatia dijitaal tata le ink kple adhesion dodokpɔ megbe.

Akpa kae wòle be woata?

Akpa si wobia la nɔ te ɖe dzedzeme kple nuŋlɔtsi ƒe ɖoɖo si wodi dzi. Ele be woado axa siwo ƒe amadede nye matte kple esiwo wowɔ nyuie la akpɔ ɖe vovo.

Ðe woate ŋu azã frosted PVC na aɖaka siwo woblaa?

Ɛ̃. Woate ŋu atso dzesi siwo sɔ, axɔ dzesi, aƒo wo nu ƒu, atsɔ aŋe abla wo alo atsɔ ga aƒo wo ɖe aɖaka siwo me woblaa nu le siwo me kɔ me.

Ðe woate ŋu awɔ frosted PVC thermoformed?

Woate ŋu awɔ dzoxɔxɔ ƒe nɔnɔme si sɔ wòazu blister packs, inserts, covers kple custom components.

Ðe tsikpe ƒe nɔnɔme gakpɔtɔ nɔa anyi le dzoxɔxɔ ƒe nɔnɔme wɔwɔ vɔ megbea?

Anyigba ate ŋu atrɔ le teƒe siwo keke ŋutɔ, eyata ele be woazã aŋɔ ŋutɔŋutɔ atsɔ ado alesi wòléa nu ɖe ​​te la akpɔ.

Ðe frosted PVC naa adzamenyawo bliboea?

Menye nenema kokoko o. Adzamenyawo nɔ te ɖe nɔnɔme, titrime, kekeli kple didime si le agbalẽ dzi nyawo kple nusi le megbe nɛ dome dzi.

Ðe woate ŋu azã frosted PVC abe LED diffuser enea?

Ate ŋu akaka kekeli, gake akaɖidɔ siwo ŋu dɔnyala bibiwo zãna la bia be woawɔ dodokpɔ siwo dzi wokpɔna le eƒe kaka, aŋɔ, teƒe dzodzoe ɣla kple dzoxɔxɔ ƒe tsitsi dodokpɔ.

Ðe woateŋu azã thin PVC abe mama si doa alɔ eɖokui enea?

Le dzɔdzɔme nu la PVC tsɛ hiã xɔtunu, megbe alo xɔtunu si léa nu ɖe ​​te eye mele be woabui abe xɔtuɖaŋu alo dedienɔnɔ ƒe ahuhɔ̃e ene o.

Ðe woate ŋu azã frosted PVC agbalẽ dzi nyawo s le gotaa?

Gbedoxɔ me zazã ɣeyiɣi didi bia be woawɔ UV-si li ke ƒe dzesi si woto vɛ eye wodoe kpɔ le yame ƒe nɔnɔme kple ɣeyiɣi si woɖo be woatsɔ akpɔe ta.

Ðe standard frosted PVC nye dzo si xea mɔ na dzoxɔxɔa?

Mele be woasusui be dzo ƒe dɔwɔwɔ o. Ele be woawɔ atike si me dzo megena ɖo o kple dodokpɔ ŋuti nyatakaka hena eƒe titrime tututu.

Ðe antistatic frosted PVC lia?

Woate ŋu ada antistatic ƒe dzesiwo kpɔ le anyigba ƒe tsitretsitsi ƒe didime si hiã kple dɔwɔwɔ ƒe nɔnɔmewo nu.

Ðe woate ŋu atso frosted PVC laser?

Mele be woatsɔ laser-dɔwɔnu dzrowo atsoe alo aŋlɔ PVC o elabena ya siwo me afɔku le kple ke ate ŋu ado tso eme. Wokafui be woatsɔ mɔ̃ atsoe.

Aleke wòle be woakɔ frosted PVC ŋui?

Zã avɔ falɛfalɛ, adzalẽ fafɛ kple tsi. Ƒo asa na abrasive pads kple aggressive solvents siwo ate ŋu agblẽ nu le anyigba ƒe nɔnɔme ŋu.

Ðe woate ŋu agbugbɔ awɔ frosted PVC ?

Woateŋu agbugbɔ atrɔ asi le PVC nuwɔwɔ ƒe kakɛ siwo le dzadzɛ ŋu le mɔ̃ɖaŋununya nu, gake wo nuƒoƒoƒu ŋutɔŋutɔ kple wo gbugbɔgazã nɔ te ɖe nutoa me dɔwɔƒewo kple nusiwo wowɔ ƒe ɖiƒoƒo dzi.

Nukae nye nudɔdɔ ƒe agbɔsɔsɔ suetɔ kekeake?

MOQ si wozãna ɖaa la ade 1000kg. Amadede siwo wowɔ ɖe ɖoɖo nu, woƒe nɔnɔmewo kple atike tɔxɛ siwo wowɔ ate ŋu abia be woazã agbɔsɔsɔ bubu.

Ðe kpɔɖeŋuwo lia?

A4 agbalẽ dzi nyawo s, kakɛ siwo wotso alo agbalẽ xatsaxatsa ƒe kpɔɖeŋu siwo seɖoƒe li na ate ŋu anɔ anyi hena ŋkuléle ɖe nɔnɔme, nukpɔkpɔ ƒe dzedzeme, agbalẽtata, babla kple wɔwɔme ŋu.

Nukae nye ɣeyiɣi si woatsɔ awɔe?

Zi geɖe la, ewɔwɔ si wozãna ɖaa xɔa abe ŋkeke 7-15 ene le esi woɖo kpe eƒe nɔnɔme, kpɔɖeŋu, babla kple fexexe dzi vɔ megbe.

Nyatakaka kawoe hiã hafi woate ŋu ayɔ nyayɔyɔ?

Na eƒe titrime, didime, nuzazã ƒe nɔnɔme, amadede, tsikpe ƒe anyigba, agbalẽtata alo wɔwɔme ƒe ɖoɖo, agbɔsɔsɔme, dzesi tɔxɛ kple teƒe si woayi.

Na Trɔ asi le Frosted PVC ƒe Agbalẽ Nyayɔyɔ

Ku ɖe HSQY Plastic Group ŋu

HSQY Plastic Group naa tsikpe PVC agbalẽ dzi nyawo s, PVC film siwo woate ŋu ata, PVC agbalẽ dzi nyawo s siwo me kɔ, amadede PVC agbalẽ dzi nyawo s, PET agbalẽ dzi nyawo s, PP agbalẽ dzi nyawo s kple esiwo wowɔ ɖe ɖoɖo nu plastic-nuwo na dukɔwo dome B2B asisiwo.

HSQY doa alɔ agbalẽtamɔ̃wo, folding-box wɔlawo, blister-packaging dɔwɔƒewo, agbalẽŋlɔmɔ̃ dɔwɔƒewo, dzesi wɔlawo, plastic converters, importers kple mamalawo kple kpɔɖeŋu dodokpɔ, customized ewɔwɔ, nyonyome me toto kple export packaging.

Bia be woagblɔ asixɔxɔ si woaxe na ye kple Kpɔɖeŋu