Wowɔ ha: Fie » PVC&PET Lamination Film

PLASTIC LAMINATION FILM A WƆYƐ

PVC Rigid Krataa wɔ Roll ne PE Lamination Film

Yɛn PVC lamination film no wɔ vacuum hyehyɛ tumi a ɛkyɛn so a ɛwɔ nkɛntɛnso kɛse ne nnuru a ɛko tia. Ɛwɔ hɔ sɛ laminate wɔ nhyehyɛe ahorow pii mu a nea ɛka ho ne: PVC/PE, PVC/EVOH/PE ne PVC/PVDC/PE ma akwanside ahorow a ɛkorɔn, oxygen ne nsu a ɛko tia kɛse. Yebetumi ayɛ amanne nhyehyɛe ahorow pii a ɛyɛ anti-static ne UV Resistant a ɛkata adetɔfo ahiade ahorow pii so fi aduan a wɔde kyekyere so kosi nnuru a wɔde kyekyere nneɛma so.

Nneɛma a wɔde di dwuma wɔ PVC Lamination Film mu:

Nam a wɔde kyekyere nneɛma foforo, Nam a wɔayɛ no foforo a wɔde kyekyere nneɛma, Nkokoaa a wɔde kyekyere nneɛma, Mpataa a wɔde kyekyere nneɛma, Cheese a wɔde kyekyere nneɛma, Pasta a wɔde kyekyere nneɛma, Aduruyɛ mu nneɛma a wɔde kyekyere nneɛma, MAP ne Vacuum nneɛma a wɔde kyekyere nneɛma.

Nsɛm a ɛfa PVC Lamination Film ho:

Nneɛma: PVC, PVC/PE, PVC/EVOH/PE, PVC/PVDC/PE
Ne kɛse: 0.1-1.5mm
Trɛw a ɛsen biara: 840mm
Kɔla ahorow: Ɛda adi pefee, Tuntum ne Fitaa. (Wɔde kɔla ahorow a wɔahyɛ da ayɛ bere a wɔabisa no).

PET Rigid Film ne PET Laminates a wɔde yɛ nneɛma

Yɛn PET Rigid Film ne PET Laminates wɔ agyapade a eye kyɛn so a wotumi de di dwuma bio, a ɛka ho ne tumi kɛse a ɛma vacuum yɛ ne nkɛntɛnso kɛse ne nnuru a ɛko tia. Ɛwɔ hɔ sɛ laminate wɔ nhyehyɛe ahorow pii mu a nea ɛka ho ne: PET/PE, PET/EVOH/PE ne PET/PVDC/PE ma akwanside ahorow a ɛkorɔn, oxygen ne nsu a ɛko tia kɛse. Yɛn PET sini no nso de ɔhyew a ɛba fam shrinkage, High Tensile Strength, Stable quality, nneɛma a atwa yɛn ho ahyia adamfofa su structures ne High brightness ne Transparency ma excellent shelf appeal.

Nnwuma a Wɔde Di Dwuma:

Nam a wɔde kyekyere nneɛma foforo, Nam a wɔayɛ no foforo a wɔde kyekyere nneɛma, Nkokoaa a wɔde kyekyere nneɛma, Mpataa a wɔde kyekyere nneɛma, Cheese a wɔde kyekyere nneɛma, Pasta a wɔde kyekyere nneɛma, Aduruyɛ mu nneɛma a wɔde kyekyere nneɛma, MAP ne Vacuum nneɛma a wɔde kyekyere nneɛma.

Nsɛm a Wɔakyerɛkyerɛ mu:

Nneɛma: PET, PET/PE, PET/EVOH/PE, PET/PVDC/PE
Ne kɛse: 0.1-1.5mm
Ne tɛtrɛtɛ a ɛsen biara: 840mm
Kɔla ahorow: Ɛda adi pefee, Tuntum ne Fitaa. (Wɔde kɔla ahorow a wɔahyɛ da ayɛ bere a wɔabisa no).

Polypropylene (PP) Film a ɛyɛ den ne PP Laminates.

Yɛn Polypropylene Films no de ano aduru kɛse ma vacuum ne thermoformed packaging. Yɛn PP Film no betumi ayɛ laminated de ama akwanside su akɛse ne oxygen ne nsu a ɛko tia a ɛkɔ soro. PP nhyehyɛe ne kɔla ahorow a wɔahyɛ da ayɛ no wɔ hɔ bere a wɔabisa no.

Nnwuma a Wɔde Di Dwuma:

Nam a wɔde kyekyere nneɛma foforo, Nam a wɔayɛ no foforo a wɔde kyekyere nneɛma, Nkokoaa a wɔde kyekyere nneɛma, Mpataa a wɔde kyekyere nneɛma, Cheese a wɔde kyekyere nneɛma, Pasta a wɔde kyekyere nneɛma, Aduruyɛ mu nneɛma a wɔde kyekyere nneɛma, MAP ne Vacuum nneɛma a wɔde kyekyere nneɛma.

Nsɛm a Wɔakyerɛkyerɛ mu:

Nneɛma: PP, PP/PE, PP/EVOH/PE, PP/PVDC/PE
Ne kɛse: 0.2-1.5mm
Ne tɛtrɛtɛ a ɛsen biara: 840mm
Kɔla ahorow: Ɛda adi pefee, Tuntum ne Fitaa. (Wɔde kɔla ahorow a wɔahyɛ da ayɛ bere a wɔabisa no).

Polystyrene a Ɛwɔ Nkɛntɛnso Kɛse (HIPS) Rigid Film ne HIPS Lamination Film

Yɛn High Impact Polystyrene Films no de ano aduru kɛse ma ma vacuum ne thermoformed packaging. Yɛn PP Film no betumi ayɛ laminated de ama akwanside su akɛse ne oxygen a ɛkɔ soro, nsu ɔhyew a ɛko tia. PP nhyehyɛe ne kɔla ahorow a wɔahyɛ da ayɛ no wɔ hɔ bere a wɔabisa no. Wɔde di dwuma kɛse de kyekyere nnuan ne anonne a ɛyɛ hyew ne ɛlɛtrɔnik nneɛma nso.

Nnwuma a Wɔde Di Dwuma:

Aduan a ɛyɛ hyew ne anonne a wɔde kyekyere nneɛma, Nam a wɔayɛ no foforo a wɔde kyekyere nneɛma, Nam a wɔayɛ no foforo a wɔde kyekyere nneɛma, Nkokoaa a wɔde kyekyere nneɛma, Mpataa a wɔde kyekyere nneɛma, Cheese a wɔde kyekyere nneɛma, Pasta a wɔde kyekyere nneɛma, Aduruyɛ mu nneɛma a wɔde kyekyere nneɛma, Ɛlektrɔnik nneɛma a wɔde kyekyere nneɛma, MAP ne Vacuum nneɛma a wɔde kyekyere nneɛma.

Nsɛm a Wɔakyerɛkyerɛ mu:

Nneɛma: HIPS, HIPS/PE, HIPS/EVOH/PE, HIPS/PVDC/PE
Ne kɛse: 0.25-1.5mm
Ne tɛtrɛtɛ a ɛsen biara: 840mm
Kɔla ahorow: Ɛda adi pefee, Tuntum ne Fitaa. (Wɔde kɔla ahorow a wɔahyɛ da ayɛ bere a wɔabisa no).

PVC/PET Lamination Nneɛma a Wɔde Yɛ Adwuma

FAQ

s

1.Dɛn ne laminated PVC sini?

PVC laminated film yɛ ɔkwan soronko bi a PVC film,yɛ laminate PE sini ne PVC den film denam laminating afiri. Sɛnea PVC rigid film ntumi nnya aduane tẽẽ, ɛnam PE ne PVC film a wɔaka abom so no,ɛtumi kura aduane tẽẽ.

2.Dɛn ne laminated PET sini?

PET laminated film yɛ ɔkwan soronko PET sini,yɛ laminate PE sini ne PET katee film denam laminating afiri,esiane sɛ PET sini akyi thereforming ntumi nkɔ tẽẽ wrapped ne shrink film, bere a ɛyɛ compounded ne PE film, wobetumi abɔ ne automatic wrapping afiri, a ebetumi kɛse akora adwuma bere ne efficiency.

3.Dɛn ne PVC krataa?

PVC krataa a ɛyɛ den no din nyinaa ne Polyvinyl Chloride Rigid Sheet. Ɔde amorphous nneɛma di dwuma sɛ raw nneɛma, ɛwɔ super adwumayɛ a ɛkorɔn wɔ anti-oxidation, anti-strong acid ne anti-reduction. PVC rigid sheet nso wɔ ahoɔden a ɛkorɔn na ɛyɛ den yiye, na ɛnyɛ nea ogya ntumi nhyew, na ebetumi ako atia nsɛe a wim nsakrae de ba. Common PVC rigid krataa no bi ne transparent PVC krataa, fitaa PVC krataa, tuntum PVC krataa, grey PVC krataa, grey PVC board, ne nea ɛkeka ho.

4.Dɛn ne mfaso a ɛwɔ PVC krataa so?

PVC krataa nneɛma no nyɛ sɛ ɛwɔ mfaso pii te sɛ nea ɛko tia nsɛe, nea ɛnyɛ hyew, nea ɛko tia nneɛma a ɛbɔ ho ban, ne nea ɛko tia oxidation nko, na mmom esiane sɛ wotumi san yɛ adwuma bio na ɛho ka sua nso nti, ma enti PVC krataa no akura adetɔn dodow a ɛkɔ soro mu bere nyinaa wɔ plastic krataa gua so. Eyi nso fi sɛnea wɔde di dwuma ahorow pii ne ne bo a ɛyɛ den. Dwumadi ahorow pii a PVC krataa yɛ no amma ne bo ankɔ soro, nanso akɔ so agye plastic krataa gua bi a ne bo nyɛ den. Mprempren, yɛn man no nkɔso a aba wɔ PVC nkrataa ne mfiridwuma a wɔde yɛ nneɛma mu no adu amanaman ntam nkɔso.

5.Dɛn ne PVC krataa/Film a wɔde di dwuma?

PVC krataa yɛ pii versatile, ɛwɔ hɔ ahorow ahorow PVC krataa,te sɛ thick PVC krataa / tratraa PVC krataa / pefee PVC krataa / tuntum PVC krataa / fitaa PVC krataa / glossy PVC krataa / Matt PVC krataa.

Esiane sɛ ɛwɔ nneɛma pa a wɔde yɛ adwuma, ɛho ka a ɛba fam wɔ adwumayɛ ho, ɛko tia nsɛe, ne nea ɛbɔ ho ban. PVC nneɛma wɔ dwumadie ahodoɔ pii, wɔde di dwuma titire de yɛ:PVC amanneɛbɔ kata so; PVC din nkrataa;PVC ntama; PVC foam board,PVC ceiling, PVC agodie kaad nneɛma ne PVC katee krataa ma blister.

Wɔde PVC soft film nso yɛ aboa nhoma ahorow nyinaa a wɔde yɛ nneɛma, agumadi nneɛma, te sɛ basketball, bɔɔlbɔ ne rugby. Wobetumi nso de ayɛ abɔso ama uniforms ne titiriw ahobammɔ equipment.There nso soft film a wɔde yɛ PVC pon so kataso,PVC ntama,PVC bags,PVC packing film.

6.Dɛn ne ɔhaw ahorow a ɛwɔ PVC krataa so?

PVC krataa nso yɛ plastic bi a wɔtaa de di dwuma. Ɛyɛ resin a wɔde polyvinyl chloride resin, plasticizer ne antioxidant ayɛ, na ɛnyɛ awuduru. Nanso, nneɛma atitiriw a ɛboa te sɛ plasticizers ne antioxidants no yɛ awuduru. Plasticizers a ɛwɔ da biara da PVC krataa plastic mu no de dibutyl terephthalate ne dioctyl phthalate di dwuma titiriw. Saa nnuru yi yɛ awuduru, na lead stearate, ade a ɛko tia ɔyare mmoawa ma PVC no nso yɛ awuduru. Kɔbere tɔ bere a PVC nkratafa a kɔbere nkyene antioxidants wom no ne ethanol, ether ne nnuru afoforo a wɔde siw yare ano di nkitaho no. Wɔde PVC krataa a kɔbere wom yɛ aduan a wɔde kyekyere nneɛma bere a ehyia mmɔre nnua a wɔayam, keeki a wɔayam, mpataa a wɔayam, nam a wɔanoa, keeki ne nnuan nketenkete, ɛbɛma kɔbere molecules atrɛw akɔ srade no mu, enti wontumi mfa PVC krataa plastic bags nni dwuma Aduan wom, titiriw aduan a ngo wom. Afei nso, polyvinyl chloride plastic nneɛma bɛporɔw hydrogen chloride mframa nkakrankakra wɔ ɔhyew a ɛkorɔn te sɛ bɛyɛ 50°C mu, a epira onipa nipadua no. Enti, nneɛma a wɔde polyvinyl chloride ayɛ no mfata sɛ wɔde kyekyere nnuan.

7.Dɛn ne top 5 akɛse PVC rigid krataa manufacturers wɔ China?

Jiangsu Jincai Polymer Nneɛma Nyansahu Ne Mfiridwuma Co., Ltd.

Changzhou Huisu Qinye Plastik Kuw no

Jiangsu Jiujiu Nneɛma a Wɔde Yɛ Mfiridwuma Co., Ltd.

Jiangsu Jumai Nneɛma Foforo Mfiridwuma Co., Ltd.

Yiwu Haida Plastic Nnwumayɛkuw, Ltd.

8.Dɛn ne dwumadie a PVC rigid krataa?

Esiane sɛ PVC krataa no yɛ adwuma yiye, nneɛma a ɛho ka sua nti, PVC nkrataa no wɔ nneɛma ahorow pii a wɔde di dwuma, titiriw de yɛ PVC Buronya Dua Film;PVC Green film a wɔde yɛ ban;PVC amanneɛbɔ kata so; PVC din nkrataa;PVC nnaka; PVC foam board,PVC ceiling, PVC agodie kaad nneɛma ne PVC katee krataa ma blister.

9.Dɛn ne PVC krataa no mu duru a ɛtaa ba?

Eyi gyina w'ahiade so,yebetumi ayɛ no fi 0.12mm kosi 10mm.

10.Dɛn ne nsɛmfua a wɔtaa de hwehwɛ adetɔfo?

Nea adetɔfo taa de di dwuma ne

1/2 inch pvc krataa

2mm pvc krataa

4mm pvc krataa

6mm pvc krataa

3mm tuntum pvc krataa

tuntum pvc krataa

pvc krataa fitaa