PET SHEET ƝƐNABƆLI & ƝƐNABƆLI
Aw bɛ APET, PETG, GAG, RPET ani PET/PE suganditaw suma ɲɔgɔn na roll walima cut-sheet cogoyaw la—o kɔfɛ, aw bɛ foroko, optiki, sigili, sanfɛla furakɛli ani sɛbɛnniw sinsin kalasi laɲininen kan.
JAABI TELIKAN
PET sɛbɛn ye sɛbɛn gɛlɛn walima fɛn gɛlɛn tilancɛ ye min dilannen don ni poliyetilɛni tereftalati fɛnw denbaya ye. PET jɛlen bɛ jateminɛ kosɛbɛ sanubɔlanw na minnu dilannen don ni funteni ye, blister ni clamshell pakew, kɛsu folilenw, fɛn sɛbɛnnenw ani baara wɛrɛw la, yɔrɔ minnu na fɛn dilannenw yecogo ni u jiginni baarakɛcogo nafa ka bon.
'PET sɛbɛn' tɛ sanniko ɲɛfɔli dafalen ye. Resin denbaya, layɛrɛ jɔcogo, a kɔnɔfɛnw min bɛ segin ka kɛ fɛn wɛrɛ ye, a bonya, a bonya, a sanfɛla furakɛli, a roll geometry, forming conditions ani compliance requirements ka kan ka ɲɛfɔ baarakɛcogo dafalen na.
MATERIAL DENBAYA GUIDE
Aw bɛ baara kɛ ni ninnu ye i n’a fɔ sɔrɔyɔrɔ daminɛyɔrɔw. Fɛnɲɛnɛmafagalan yɛrɛyɛrɛ ni fɛɛrɛko kunnafoniw minnu bɛ di, olu de bɛ baarakɛcogo de jira.
Tuma caman na, u bɛ jate fɛn surunw ye minnu bɛ kɛ ka ɲɛsin pakew ma minnu bɛ kɛ ni funteni ye, ni u gɛlɛyara, u jɛlen don ani u ka roll-processing consistency ye fɔlɔfɔlɔw ye.
A ka c’a la, a bɛ jateminɛ kɛ foroko, bending, folding-box ani display baarakɛcogo la minnu mago bɛ sɛbɛn jɛlen na min ka baarakɛcogo tɛ kelen ye ni APET ye.
A co-extruded construction min ɲɛfɔlen don caman na ni PETG fariw ye ani APET core, min jateminɛna ka ɲɛsin porogaramu jɛlenw dilanni n’u jiginni ma.
PET sugandilen dɔ porozew kama minnu ka laɲiniw ɲɛfɔlen don minnu bɛ fɛnw lasegin u cogo kɔrɔ la. Kɔnɔkow, u bɔyɔrɔ, u nɔfɛtaama ani u baara laban sɛbɛnw mago bɛ poroze siratigɛ la dantigɛli la.
| Desizɔn yɔrɔ | APET | PETG | GAG | RPET |
|---|---|---|---|---|
| Daminɛ surun min bɛ kɛ cogoya la | Termoforming rigide jɛlen | Foroko, kɔrɔta walima foli | Layered jɛlen jɔli | Laɲini min ɲɛfɔra ka segin-ka-bɔ-fɛnw kan |
| Key confirmation (dafalan kunbabaw). | Foromasiyɔn finɛtiri & optiki | Taabolo bɛnkan | Layɛrɛ jɔcogo & surface | Kɔnɔkow, sɔrɔyɔrɔ & yecogo |
| Sannikɛla ka kan ka fɛnw di | Moule ni pakew ɲɛfɔli | Yɛlɛma sira ni ja | Baarakɛcogo dafalen ani sɛgɛsɛgɛli kɛcogo | Politiki, sugu ani sɛbɛnw lisɛli |
SISAN FƐƐRƐW SƆRƆLI
O jɛgɛnsira ninnu bɛ baara kɛ ni fɛnw ye minnu jiralen bɛ HSQY ka baarakɛminɛn kan sisan. Kalanso laban, a cogoya min bɛ sɔrɔ ani poroze sɛbɛnw dafa quotation kɔnɔ.
APET roll sugandicogo jɛlen dɔ ka ɲɛsin kɔrɔbɔliw sigili ma ani pakew dilanni ma.
A ye fɛn dilannen lajɛPETG sɛbɛn jɛlen dɔ min bɛ kɛ ka taabolo bɛnkan ni yecogo sɛgɛsɛgɛli kɛ.
A ye fɛn dilannen lajɛPorozɛ minnu bɛ daminɛ ni tigɛ-sɛbɛn hakɛ ɲɛfɔlen ye.
A ye fɛn dilannen lajɛGAG jɔli dɔ walasa ka jateminɛ kɛ ka ɲɛsin blister transparent ani forming porogaramuw ma.
A ye fɛn dilannen lajɛA lamininen dɔ min bɛ kɛ ka sigilan ni sanubɔlan-sitɛmu jateminɛ.
A ye fɛn dilannen lajɛA jɛlen don ka roll-stock sugandi; sɛbɛnw ɲini minnu wajibiyalen don sugu laɲininen na.
A ye fɛn dilannen lajɛSɛbɛn gɛlɛn sugandilen dɔ min bɛ kɛ ka surface-treatment ani scratch-test seginnkanni kɛ.
A ye fɛn dilannen lajɛBaarakɛ-yɔrɔ sugandilen dɔ ka sɛgɛsɛgɛli kɛ funteni ni nɛnɛ sɛrɛkili yɛrɛ kɔrɔ.
A ye fɛn dilannen lajɛƝƐNABƆLI MIN BƐ SƆRƆ APPLICATION-BASE
O PET tɔgɔla janya kelen bɛ se ka kɛ cogo wɛrɛ la ni layɛrɛ jɔcogo, a sanfɛla furakɛli, a wulicogo ani a dilanni jateminɛ bɛ Changé.
Dumuni suguya, a facogo ani a maracogo, a foroko juguya, a sigicogo ani a taayɔrɔ-sɔgɔli wajibiyalenw fɔ.
Aw bɛ a sɛmɛntiya: dumuniko sɛbɛnw dilanni, u dacogo, u sigicogo ani u sigicogo ani u bɛ se ka baara kɛ ni u ye.Aw bɛ cavity layout, draw ratio, product weight, closure design, optical target ani pakew tali cogoyaw tila ɲɔgɔn na.
Tiɲɛni: kogo tilatilali, jɛya, tigɛcogo ani dadon baarakɛcogo.Aw bɛ sɛbɛnni kɛcogo ɲɛfɔ, korona walima finimugu magow, foli sira, jatebɔcogo, siricogo ani a cogoya dafalen.
Aw bɛ a tiɲɛ: tintin nɔrɔli, foli finman, sirili ani a sanfɛla nafama.Aw bɛ yɔrɔ jateminɛcogo di, a minɛcogo sigida ani fɛn o fɛn bɛ kɛ ka ɲɛsin fɛn o fɛn ma min bɛ se ka kɛ fɛn ye min bɛ se ka wuli, min bɛ se ka fɛnw ta walima minnu bɛ se ka kɛ yɔrɔ saniyalen ye.
Tiɲɛni : kuran yɔrɔ kofɔlenw, a dilanni ani nɔgɔko kɔlɔsili.CONVERTER RISK SƐBƐN
Janya caman ɲɔgɔnna bɛ se ka funteni, ja ani kogo dafalen tilatilali Changer. Aw bɛ bɛn sumanikɛcogo ni muɲuli ma.
A bonya, a kɔnɔna, a kɛnɛma cɛmancɛ, a kuru girinya, a wulicogo ani a dakun cogoya ka kan ka bɛn layini ni a minɛminɛnw ma.
Aw bɛ sisi, jɛya, kɛnɛya, kulɛri, jeli, sɔgɔsɔgɔninjɛ, lakanani filimu ani ɲɛda min bɛ furakɛli sɔrɔ, o ɲɛfɔ.
Aw bɛ tugu kalata kunnafonisɛbɛn kɔ ani ka sumaya, foroko, tigɛ, sɛbɛnni, sirili walima sirili tiɲɛ fɛn jiralenw kan.
ƝƐFƆLI-FƆLƆ RFQ
Ni kalasi ma sugandi fɔlɔ, aw bɛ pake dafalen, masin ani sɔnni sɛgɛsɛgɛli di. Fɛɛrɛko ladilikan nafa ka bon kosɛbɛ ni baarakɛminɛn in ɲɛfɔlen don ka jɛya.
| RFQ foro | Kunnafoni ka kan ka di |
|---|---|
| Baarakɛcogo laban | Fɛn dilannen, fɛn min bɛ pake kɔnɔ ani baarakɛcogo/maracogo |
| Minɛ | APET, PETG, GAG, RPET, PET/PE walima dɛmɛ sugandili |
| Gauge & bonya | Tɔgɔla janya, muɲuli, web bonya walima sɛbɛnfura hakɛw |
| Roli labɛncogo | Core ID, kɛnɛma cɛmancɛ, roll girinya/janya, winding ani edge wajibiyalenw |
| Termoforming (sɛnɛfɛnw sɛnɛcogo). | Masina, mɔli, kɔnɔna juguya, ja hakɛ, tigɛcogo ani laɲini cycle |
| Optique & surface (yɔrɔ ɲɛnama). | Kulɛri, haze/clarity laɲini, gloss, coating, corona, masking walima texture |
| Baarakɛcogo magow | Anti-fog, anti-static, sealing layer, sɛbɛnni walima sirili wajibiyalen |
| Ka bɛn a ma | Laɲini sugu, baarakɛcogo laban sariya ani sɛbɛnw lisɛli tigitigi |
| Jago | Misali hakɛ, komandi hakɛ, pakew, taayɔrɔ port ani laɲini don |
SAMPLE-TO-ORDER BAARAKƐCOGO
Aw bɛ fɛɛrɛko ni jago basigilenw to ɲɔgɔn na, taabolo bɛɛ kɔnɔ.
Aw bɛ sɛbɛn ci, a jɔli, a hakɛ, a masin ani sɛbɛn wajibiyalenw.
Kandidati ka kalasi, roll format ani sample plan sugandi ka ɲɛsin taabolo laɲininen ma.
Aw bɛ sɛbɛnfura dilan, k’a sɛbɛn, k’a siri, k’a da walima k’a lajɛ ni a jiracogo ye.
Sɛbɛn min bɛ sɔn a ma, muɲuli, a ɲɛda, a cogoya, a pakew ani a sɛbɛnw.
Quote ani produce ka kɛɲɛ ni bɛnkan sɛbɛnnen ɲɛfɔli ni sɔnni ɲɛfɔli ye.
SANNI ƝƐNABƆLI ƝƐNABƆLI
Jaabi tilennenw ka ɲɛsin thermoformerw ma, pakew tigɛlikɛlaw ma, marka ekipuw ani feerekɛlaw ma.
Aw ye ɲininkali kɛ aw ka PET sɛbɛn porozɛ laPET ye polimɛri denbayaba ye. APET ye PET amorphe ye min bɛ kɛ ka caya ka ɲɛsin thermoforming rigide jɛlen ma; PETG ye PET ye min sɛgɛsɛgɛra ni glycol ye, a dilanni ni a kɔrɔtacogo tɛ kelen ye; GAG ye caman na PETG/APET/PETG layɛrɛ sɛbɛn ye; PET min bɛ segin ka kɛ fɛn wɛrɛ ye, o bɛ sɔrɔ RPET kɔnɔ. A furakɛcogo tigitigi ni a sɛbɛnni ka kan ka dafa kalanso kelen-kelen bɛɛ la.
Duniya bɛɛ ka kalasi ɲuman tɛ yen. Sugandili bɛ bɔ mɔni na, ja juguya, masin, funteni fɛɛrɛ, tigɛcogo, gɛlɛya dafalen, optiki, sigili ani sariyaw magow. Aw bɛ APET, PETG, GAG, RPET walima lamini sɛgɛsɛgɛli kɛlenw suma ɲɔgɔn na ni taabolo yɛrɛ ye.
Aw bɛ baara kɛ ni kalati dɔrɔn de ye min dɛmɛna dumuni ni ɲɔgɔn cɛ baarakɛcogo laɲininen na ani taayɔrɔ sugu la. Dumuni suguya, a funteni ani a maracogo fɔ, o kɔ, i ka fɔta walima sɛgɛsɛgɛli sɛbɛnw ɲini minnu bɛ tali kɛ o jɔli yamaruyalen na.
Aw bɛ a bonya ni a muɲuli, a bonya ni a muɲuli, a kɔnɔna ID, a kɛnɛma cɛmancɛ hakɛ, a kuru girinya walima a janya, a jiginni sira, a dakun cogoya, a pake, a masin dan ani a jigincogo ɲɛfɔ.
Aw bɛ laɲini kɛcogo ɲɛfɔ, sɛgɛsɛgɛli kɛcogo, sumani hakɛ, a tali cogoya, a kuntaala ani ni furakɛli ka kan ka kɛ fan kelen fɛ walima fan fila bɛɛ fɛ. Aw bɛ sɔn jaabiw ma yɔrɔ dabɔlen yɛrɛ kan ni a bɛ se ka kɛ.
Ayi, fɛn minnu bɛ segin ka kɛ fɛn wɛrɛw ye ani minnu bɛ se ka segin ka kɛ fɛn wɛrɛw ye, olu ye ɲininkaliw ye minnu tɛ kelen ye. Layɛrɛ jɔcogo, faralifɛnw, finiw, labeliw, kulɛri ani sigida lajɛ/segin kɛcogo bɛɛ nafa ka bon. Kɛmɛsarada la min bɛ segin ka kɛ fɛn wɛrɛ ye ani sugu kɛrɛnkɛrɛnnenw ka dilancogo wajibiyalenw dafa danfara la.
Misali dɔ b’a to fɛn caman tigɛli bɛ se ka layini balocogo, sumaya, foroko, kogo tilatilali, optiki, tigɛcogo, sɛbɛnni, sigicogo ani yɔrɔ dafalen kɛcogo lajɛ. Misali min dabɔra ani ɲɛfɔli sɛbɛnnen bɛ sɔnni basigilen dɔ da.
A DAMINƐ NI I KA ƝƐNABƆLI TAABƆLI YE
Aw ye aw ka baarakɛcogo dafalen kunnafoniw ci, aw ka fɛnw diyabɔ, u bonya, u ka minɛnw dan, san o san ɲinini ani sɛbɛnw wajibiyalenw.
