Polycarbonate Film a Ɛda Hɔ

Clear Polycarbonate Film Ɔyɛfo & Ɔde Ma

HSQY Plastic yɛ na ɛde polycarbonate film a emu da hɔ ma mfonini a wɔde kata so, membrane switches, instrument panels, nameplates, labels, electronic displays, in-mold decoration, printing, die cutting, thermoforming ne mfiridwuma mu nneɛma afoforo a ɛyɛ pɛpɛɛpɛ.

Wɔsan frɛ no pefee PC film, transparent polycarbonate film anaa polycarbonate film roll, saa engineering thermoplastic yi bom high transparency, impact resistance, dimensional stability, ɔhyew a ɛko tia ne papa secondary-processing adwumayɛ.

HSQY de polycarbonate film a ɛda adi pefee ma wɔ pii thicknesses, trɛw ne soro wie a polished, glossy, fine matte, matte, velvet / textured ne paw hard-coated options. Mprempren nneɛma a wɔde sini a emu da hɔ yɛ no bi ne ne kɛse fi bɛyɛ mm 0.125 kosi mm 1.0 , a ne tɛtrɛtɛ bɛyɛ mm 1220 ma grade ahorow a wɔapaw.

Standard pefee PC sini, optical-grade film, UV-resistant film, ogya-retardent film ne hard-coated film wɔ adwumayɛ ho nkyerɛkyerɛmu soronko. Ka wo application, thickness, optical requirements, printing method, surface finish ne functional requirements kyerɛ HSQY sɛnea ɛbɛyɛ a wobetumi apaw grade a ɛfata.

Dɛn Ne Polycarbonate Film a Ɛda Hɔ?

Polycarbonate film a emu da hɔ yɛ film a ɛyɛ tratraa a ɛyɛ mmerɛw a wɔde polycarbonate, mfiridwuma mu thermoplastic a ɛyɛ adwuma yiye a wonim no sɛ ɛyɛ den, ɛyɛ hyew na ɛyɛ den wɔ ne kɛse mu.

Nea ɛnte sɛ polycarbonate panels a ɛyɛ den a ɛyɛ den a wɔde yɛ ɔdan atifi ne glazing no, wɔtaa de PC film ma wɔ gauges a ɛyɛ tratraa kakra mu de tintim, yɛ, die cutting, lamination, insulation ne precision component production.

PC sini a emu da hɔ betumi ama hann a ɛkɔ soro akɔ bere a ɛkura nkɛntɛnso a ɛko tia kɛse kɛse sen plastic pii a ɛyɛ mmerɛw a wɔtaa de di dwuma no. Ɛgyina grade ne soro, ɛsan nso tumi ma tintim dinkyerɛw a ɛkyɛn so, ɔhyew a ɛko tia ne dimensional stability.

Saa nneɛma yi ma polycarbonate sini no yɛ nea mfaso wɔ so titiriw ma ɛlɛtrɔnik mfiri, kar mu nneɛma, mfiridwuma mu mfonini, membrane switches, mfiri a wɔde di dwuma, nneɛma a wɔde hu ne nneɛma a wɔde siesie nneɛma a wɔayɛ.

Polycarbonate Film Nkyerɛkyerɛmu a Ɛda Hɔ

HSQY de PC sini abasobɔde ahorow pii a emu da hɔ ma. Nsonsonoe a etwa to gyina ne kɛse, resin, ɔfasu awie ne dwumadi ho nkyerɛkyerɛmu so. Table a edidi so yi bɔ mprempren akwan horow a wɔtaa paw no mua.

Ɛsɛ sɛ wɔsi optical su, thickness tolerance, surface roughness, flame rating, UV resistance, hard-coat adwumayɛ ne anyinam ahoɔden su so dua bere nyinaa de gyina PC film grade pɔtee no so sen sɛ wɔbɛfa no afi ade no din a ɛwɔ hɔ nyinaa mu.

Nneɛma Titiriw a Ɛwɔ Polycarbonate Film a Ɛda Adi Mu

Nhumu a Ɛkorɔn

PC sini a ɛfata a ɛda adi pefee betumi ama hann a ɛkɔ so bɛyɛ 89%–92%, na ɛma ɛyɛ nea mfaso wɔ so ma mfonini a wɔde kata so, nneɛma a wɔde kyerɛ, mfɛnsere a ɛda adi ne nneɛma a ɛwɔ akyi.

Nkɛntɛnso a Ɛkorɔn a Ɛko Tia

Wɔbu polycarbonate sɛ ɛsom bo esiane sɛ ɛyɛ den na ɛko tia nsunsuansoɔ nti. Eyi betumi ama ayɛ den kɛse sen nneɛma a ɛyɛ mmerɛw a ɛyɛ mmerɛw kɛse wɔ mfiridwuma mu control panels, overlays, electronic products ne formed components mu.

Nsusuwii mu Gyinabea

Nsusuwii pa a ɛgyina pintinn ho hia titiriw wɔ multi-layer tintim, die-cut components, membrane switches ne in-mold decoration a ɛsɛ sɛ mfonini a wɔatintim ne mfiridwuma mu nneɛma kɔ so kyerɛw no pɛpɛɛpɛ.

Ɔhyew a Ɛko Tia

Polycarbonate ma ɔhyew adwumayɛ a ɛkorɔn sen plastic pii a wɔtaa de kyekyere nneɛma, na ɛma ɛfata ma kar, mfiri, ɛlɛtrɔnik ne mfiridwuma mu mfonini ahorow a wɔapaw a ɛwɔ ɔhyew a ɛkɔ soro mu.

Nneɛma a Wotumi tintim no Yiye

Wɔayɛ PC sini ahorow a emu da hɔ a wɔapaw ama mfonini tintim na ebetumi aboa nhyehyɛe ahorow a ɛne solvent, nsu, UV-curing ne ink nhyehyɛe afoforo a ɛne no hyia. Ɛsɛ sɛ wɔde sini no ani pɛpɛɛpɛ ne ɔkwan a wɔfa so yɛ no si tintim adwumayɛ so dua.

Electrical Insulation a Wɔde Yɛ Adwuma

Polycarbonate betumi ama anyinam ahoɔden a ɛbɔ ho ban a mfaso wɔ so, na ɛma grade ahorow a wɔapaw no fata ma nneɛma a ɛbɔ ho ban, batere dwumadie, ɛlɛtrɔnik ne mfiri nhyiamu wɔ baabi a ɛhia sɛ anyinam ahoɔden adwumayɛ.

Polycarbonate Film a Ɛda Adi a Wɔde Di Dwuma

Mfonini a Wɔde Kata So

Wɔde polycarbonate film a emu da hɔ di dwuma kɛse sɛ ade a wɔde gyina so ma mfonini a wɔatintim a wɔde kata so wɔ mfiridwuma mfiri, mfiri, mfiri a wɔde di dwuma ne ɛlɛtrɔnik nneɛma so. Wobetumi atintim mfonini ahorow no akyi de aboa ma wɔabɔ ink a ɛwɔ sini a ɛyɛ mmerɛw no ase ho ban.

Membrane Switches a Wɔde Sesa Nneɛma

Polycarbonate film ma tintim a ɛne ne ho hyia, dimensional stability, toughness ne embossing tumi a wɔaka abom ma membrane-switch overlays, keypads ne onipa-mfiri ntam nkitahodi.

Nnwinnade Panel ne Control Panels

Wobetumi de PC sini ahorow a ɛda adi anaasɛ wɔakyerɛw so adi dwuma ama kar dashboards, mfiri panels, mfiridwuma control panels ne electronic display interfaces a ɛho hia sɛ wɔde mfonini a wɔatintim ne nea ɛtra hɔ kyɛ.

Edin Krataa ne Nnwumayɛbea Nkyerɛwde

Wobetumi atintim PC sini na wɔatwa no awu ayɛ no din nkrataa a ɛyɛ den, kɔkɔbɔ nkyerɛwde, nnwinnade nkyerɛwde ne mfiridwuma mu mfonini ahorow a wɔakyerɛw so.

In-Mold Decoration ne In-Mold Ɛlektrɔnik Nneɛma

Wobetumi atintim PC sini a emu da hɔ a ɛfata, ayɛ na wɔde ahyɛ nneɛma a wɔanwene mu ama mfiri panels, kar mu nneɛma, consumer electronics ne decorative components. Dimensional stability pɛpɛɛpɛ ho hia titiriw ma print-to-form registration.

Ɛlektrɔnik Nneɛma a Wɔde Kyerɛkyerɛ

Wobetumi de PC sini a emu da hɔ adi dwuma wɔ display windows a wɔapaw, ahobammɔ a wɔde kata so, nkitahodi mfiri ne ɛlɛtrɔnik interfaces mu. Ɛsɛ sɛ nnwuma a ɛhwehwɛ sɛ haze a ɛba fam koraa anaasɛ wɔhwɛ so denneennen wɔ optical performance so no de PC film a wɔatu ho ama a ɛyɛ optical-grade di dwuma.

ID Kaad ne Ahobammɔ Kaad

Wobetumi de polycarbonate films a ɛyɛ tratraa adi dwuma sɛ card layers, overlays ne printable substrates wɔ identification ne security-card adansi a wɔapaw mu.

Nneɛma a Wɔde Siw Electrical Insulation

Wobetumi atwa PC film grades a wɔapaw no akum mu ayɛ no insulating barriers, spacers ne ahobammɔ nneɛma a wɔde yɛ battery, anyinam ahoɔden mfiri ne ɛlɛtrɔnik nhyiam ahorow.

PC Film a emu da hɔ vs Polycarbonate krataa a ɛyɛ den

Polycarbonate film a emu da hɔ ne polycarbonate krataa a ɛyɛ den de polymer abusua koro na edi dwuma nanso mpɛn pii no ɛsom dwumadie ahodoɔ.

Wɔ ɔdan atifi, wim ahwehwɛ, glazing panels akɛse ne structural safety guards ho no, ɛsɛ sɛ adetɔfo taa hwɛ HSQY solid polycarbonate sheet range no mu sen sɛ wɔbɛhwɛ saa thin-film category yi.

Standard Clear Film vs Optical-Grade PC Sini a Ɛyɛ Fɛ

Sɛ wo dwumadie no wɔ haze a wɔakyerɛkyerɛ mu, optical distortion, birefringence, light-transmission anaa display requirement a, kyerɛ saa values ​​no wɔ wo RFQ mu na bisa optical-grade material mmom sen sɛ wode wo ho bɛto asɛmfua 'clear.' nkutoo so.

PC Film Surface Finishes a ɛda adi pefee

Nsɛm a Wɔtintim wɔ Polycarbonate Film a Ɛda Mu So

Ntintim adwumayɛ yɛ ade titiriw biako nti a wɔde polycarbonate sini di dwuma kɛse ma nneɛma a wɔde kata so ne mfiridwuma mu mfonini ahorow.

Ɛdenam sini no grade ne ne soro so no, akwan a wɔfa so tintim a ɛne ne ho hyia no bi ne:

• Screen print a wɔde tintim nhoma

• UV a wɔde tintim nhoma

• Offset tintim wɔ abasobɔde a ɛfata so

• Ink nhyehyɛe ahorow a egyina solvent so

• Ink nhyehyɛe a wɔde nsu yɛ wɔ nneɛma a ɛne ne ho hyia so

• Nhoma tintim a wɔde akyi anaa nea ɛto so abien

• Mfonini a wɔde tintim nneɛma a ɛwɔ ntoatoaso pii

• Digitals-printing nhyehyɛe ahorow a wɔapaw

Reverse printing taa yɛ nea mfaso wɔ so ma mfonini a wɔde kata so efisɛ wɔde ink a wɔatintim no si PC layer a ɛyɛ mmerɛw no akyi, na ɛboa ma wɔbɔ mfonini ahorow ho ban fi abrasion tẽẽ ho bere a wɔde redi dwuma no.

Bere nyinaa sɔ ink adhesion, drying anaa curing, kɔla a wɔsan yɛ, layer registration ne post-forming adwumayɛ hwɛ ne PC film grade ankasa ansa na woapene aguadi mu.

Die Twitwa, Embossing ne Forming

Polycarbonate sini a emu da hɔ boa nsakrae a ɛto so abien pii a mfiridwuma mu mfonini ne ɛlɛtrɔnik mfiri ayɛfo de di dwuma.

• Die Cutting: Wɔde yɛ overlay profiles, mfɛnsere, labels, ntokuru ne precision components.

• Punching: Ɛfata ma mounting ntokuru ne component features.

• Embossing: Wɔde yɛ tactile keys, domes, raised symbols ne decorative effects.

• Thermoforming: Wobetumi ama grade ahorow a wɔapaw no ayɛ hyew na wɔayɛ no afã abiɛsa.

• Hydroforming: Wobetumi de adi dwuma ne grades a ɛfata ama nsɛm a wɔahyehyɛ graphic components.

• Bending: Wobetumi ayɛ film a ɛyɛ tratraa sɛnea nneɛma no kɛse ne sɛnea wɔayɛ no radius te.

• Lamination: Wobetumi de PC film ahyɛ multi-layer nhyehyɛe ahorow mu ama dwumadie a wɔapaw.

Polycarbonate Film a Wɔde Yɛ Membrane Switches

Ɛsɛ sɛ membrane switch overlay ka mfonini ahorow a wotumi hu ne mfiridwuma a wotumi yɛ no mpɛn pii bom. Wɔtaa paw polycarbonate film efisɛ ebetumi aboa tintim, embossing, die cutting ne nkitahodi a wɔde di dwuma mpɛn pii.

Ɛsɛ sɛ adetɔfo kyerɛkyerɛ mu sɛ:

• Film no mu duru

• Gloss, matte anaasɛ textured soro

• Mfɛnsere a wɔhwehwɛ sɛ ɛda adi pefee anaasɛ wɔde kyerɛ

• Nhyehyɛe a wɔde tintim nhoma

• Geometry a wɔde embossed-key ayɛ

• Die-cut abodwokyɛre

• Ɔhyew a wɔde yɛ adwuma

• Nnuru a wɔde tew nneɛma ho a wɔde da wɔn ho adi

• Ɛho hia sɛ ɛko tia abrasion anaasɛ scratch

• Ogyaframa a wɔhwehwɛ sɛ wɔde hyɛ mu sɛ ɛfata a

Standard, UV, Ogya-Retardant ne Hard-Coated PC Film

Ɛnyɛ polycarbonate sini biara a ɛda adi pefee na ɛwɔ dwumadi koro. Abasobɔde a ɛfata a wobɛpaw no ho hia titiriw ma abɔnten, anyinam ahoɔden ne nneɛma a wɔde ka ade kɛse.

Polycarbonate Film a emu da hɔ vs PET Film

Nneɛma pa a Wɔhwɛ so ma Polycarbonate Film a ɛda adi pefee

Ɛsɛ sɛ B2B adetɔfo kyerɛkyerɛ gye a wotumi susuw mu, titiriw bere a wɔde PC sini di dwuma de tintim, kata so anaasɛ precision die-cut components.

Sɛnea Wobɛpaw Polycarbonate Film a Ɛda Hɔ a Ɛfata

1. Kyerɛkyerɛ dwumadie no mu: Graphic overlay, membrane switch, instrument panel, display, label, insulation anaa IMD fã.

2. Paw thickness: Kyerɛ mprempren gauge anaasɛ stiffness ne forming suban a wɔhwehwɛ.

3. Kyerɛkyerɛ ahwehwɛde a ɛfa aniwa ho mu: Hann a wɔde fa, ahum ne aniwa a wɔkyinkyim wɔ baabi a ɛfata.

4. Paw ɔfasu awie: Polished, gloss, fine matte, matte anaa textured.

5. Si ɔkwan a wɔfa so tintim no so dua: Fa ink nhyehyɛe ne ɔkwan a wɔfa so sa yare no ma.

6. Si so dua sɛ wɔyɛ adwuma a ɛto so abien: Die twa, embossing, thermoforming, bending anaa lamination.

7. Kyerɛ baabi a wɔyɛ adwuma: Ɔhyew, ɔhyew, nnuru, nneɛma a wɔde tew nneɛma ho ne abɔnten so a wɔde wɔn ho hyɛ mu.

8. Kyerɛkyerɛ adwumayɛ mu ahwehwɛde ahorow mu: UV a ɛko tia, ogyaframa dodow, ade a wɔde kata so denneennen, anyinam ahoɔden a wɔde siw ano anaasɛ optical grade.

9. Kyerɛ roll dimensions: Trɛw, core, roll diameter ne roll weight wɔ baabi a wɔde roll-fed processing di dwuma.

10. Run a production trial: Sɔ tintim, forming, die cutting ne finished-part adwumayɛ hwɛ ansa na wɔapene so kɛse.

Custom Clear Polycarbonate Film Nneɛma a Wɔpaw

Nneɛma a Wɔde Gu Nneɛma Mu ne Nneɛma a Wɔde Kɔ Amannɔne

PC film a emu da hɔ hwehwɛ sɛ wɔde di dwuma yiye efisɛ nsensanee, mfutuma ne nhoma mmobɔwee a ɛsɛe betumi aka tintim ne sɛnea ɛbɛyɛ a etwa to.

• Film a ɛbɔ ho ban ma nneɛma a wɔapaw

• PE a wɔde kyekyere nneɛma ho

• Kraft-krataa ahobammɔ

• Roll anaa krataa a wɔde kyekyere nneɛma

• Wɔayɛ slit rolls a wɔayɛ no sɛnea wɔpɛ

• Edge ne corner ahobammɔ

• Palletized export nneɛma a wɔde kyekyere nneɛma

• Customized roll mu duru

• Batch ne roll ho nkyerɛkyerɛmu

Dɛn Nti na Wopaw HSQY sɛ Wo Polycarbonate Film a Ɛda Hɔ Daa a Wɔde Ma?

• PC Film Grades pii: Nea ɛda adi pefee, aniwa, ɛnyɛ ogyaframa, UV-resistant, hard-coated, hann-trɛw ne tinted options.

• Custom Thickness: Multiple thin-film gauges a wɔde tintim ne mfiridwuma mu nsakrae.

• Custom Width: Wobetumi de rolls trɛw ne slit rolls atoto adetɔfo nnwinnade ho.

• Nneɛma pii a wɔde wie wɔ soro: Gloss, polished, matte, fine matte ne textured options.

• Printing Applications: Nkɔsoɔ a ɛfata ma graphic overlays, labels, cards ne industrial panels.

• Secondary Processing: Wobetumi asusuw die cutting, embossing, forming, bending ne lamination ho.

• Mfiridwuma mu Data Mmoa: HSQY de polycarbonate film data nkrataa pii ma ma application-specific grades.

• B2B Export Supply: Mmoa ma ɛlɛtrɔnik mfiri ayɛfo, tintimfo, converters, kar a wɔde ma ne wɔn a wɔkyekyɛ.

Nsɛm Bɛn na Ɛsɛ sɛ Wɔde Ka Wo RFQ Ho?

1. Wɔawie application no

2. PC film kɛse ne abodwokyɛre

3. Roll trɛw anaa krataa no nsusuwii

4. Tinted ahwehwɛde a emu da hɔ anaasɛ ɛda adi pefee

5. Gloss, polished, fine matte, matte anaasɛ textured soro

6. Hann-a wɔde fa nneɛma mu ahwehwɛde

7. Maximum haze sɛ ɛfata a

8. Ɔkwan a wɔfa so tintim nhoma ne ink nhyehyɛe

9. Die twa, embossing anaasɛ forming nhyehyɛe

10. Ɔhyew a wɔde yɛ adwuma

11. Nnuru anaa ade a wɔde tew nneɛma ho a wɔde hyɛ mu

12. UV a ɛko tia sɛ ɛho hia a

13. Flame rating sɛ ɛho hia a

14. Hard-coat anaasɛ scratch-resistance ahwehwɛde

15. Sɔhwɛ dodow

16. Ɔsram biara anaa afe afe ahwehwɛde

17. Ɔman anaa hyɛn gyinabea a wɔrekɔ

18. Nneɛma a wɔhwehwɛ wɔ nneɛma a wɔde kyekyere nneɛma ho

Nsɛm a Wɔtaa Bisa Fa Polycarbonate Film a Ɛda Mu Ho

Dɛn na wɔde polycarbonate film a emu da hɔ di dwuma?

Wɔtaa de polycarbonate film a emu da hɔ di dwuma de yɛ mfonini a wɔde kata so, membrane switches, mfiridwuma mu nkyerɛwde, din nkrataa, nnwinnade panels, mfiri a wɔde di dwuma, ɛlɛtrɔnik nneɛma a wɔde kyerɛ, adansedi nkrataa, nneɛma a wɔde siesie wɔ nkuku mu ne nneɛma a wɔde siw anyinam ahoɔden ano.

PC film a emu da hɔ a ɛyɛ den bɛn na ɛwɔ hɔ?

Mprempren HSQY pefee PC sini nneɛma no bi ne bɛyɛ 0.125, 0.20, 0.25, 0.375, 0.50, 0.80 ne 1.00 mm. Wobetumi aka nsɛm afoforo a wɔakyerɛkyerɛ mu ho asɛm a egyina abasobɔde ne nea wɔkra ho ahwehwɛde ahorow so.

Polycarbonate film a emu da hɔ no yɛ nea ɛda adi dɛn?

Polycarbonate films a ɛfata a ɛyɛ mmerɛw betumi ama hann a ɛkɔ nipadua no mu bɛyɛ 89%–92%. Botae ankasa gyina ne kɛse, resin grade ne ne soro texture so. Ɛsɛ sɛ optical applications nso kyerɛ haze ne optical criteria afoforo.

So PC sini a emu da hɔ ne PC sini a wɔde optical-grade yɛ no yɛ pɛ?

Ɛnyɛ nea ɛho hia ankasa. Standard clear film ma general transparency, bere a optical-grade film no yɛ nea wɔayɛ ama applications a ɛhwehwɛ sɛ wɔhwɛ so denneennen kɛse haze, hann transmission, surface quality ne optical distortion.

So wobetumi atintim polycarbonate sini?

Aane. Grades a ɛfata boa screen printing ne solvent-based, nsu-based, UV anaa IR-cured printing nhyehyɛe afoforo a ɛne no hyia. Ɛsɛ sɛ wɔsɔ ink a ɛbata ho hwɛ wɔ sini a wɔapaw no ne ne soro ansa na wɔayɛ no pii.

So wobetumi atintim PC sini no wɔ akyi?

Aane. Wɔtaa de reverse anaa second-surface printing di dwuma ma graphic overlays efisɛ PC layer a ɛda adi pefee no betumi abɔ mfonini a wɔatintim no ho ban afi contact tẽẽ ne abrasion ho.

So wobetumi atwa PC sini a emu da hɔ?

Aane. Polycarbonate film no dannan kɛse denam die twitwa ne punching ma overlays, labels, switches ne precision afã horow. Ɛsɛ sɛ wɔyɛ adwinnade nhyehyɛe no yiye ma sini no mu duru a wɔapaw no.

So wobetumi akyerɛw polycarbonate sini no?

Aane. Wobetumi ayɛ PC film a ɛfata embossed de ayɛ tactile keys, switch domes, raised symbols ne decorative features ama membrane switches ne control-panel applications.

So wobetumi ayɛ polycarbonate sini a emu da hɔ no thermoformed?

Aane. Wobetumi ayɛ grades a ɛfata thermoformed ama IMD, kar, mfiri ne ɛlɛtrɔnik nneɛma. Ɛsɛ sɛ wɔde ɔfã nhyehyɛe ankasa ne sini grade di dwuma de si Forming temperature ne dimensional compensation so dua.

So polycarbonate film a emu da hɔ nyinaa tumi gyina UV ano?

Dabi UV adwumayɛ gyina resin a wɔayɛ, stabilizers anaa ahobammɔ coating so. Ɛsɛ sɛ abɔnten anaa bere tenten UV dwumadie kyerɛ PC sini grade a wɔatu ho ama a ɛko tia UV.

So polycarbonate film nyinaa ntumi nhyew?

Dabi, ogyaframa no adwumayɛ gu ahorow wɔ ne grade ne ne kɛse mu. Ɛsɛ sɛ nnwuma a ɛhwehwɛ sɛ wɔde UL94 V-0, V-2 anaa nkyekyɛmu foforo a wɔakyerɛkyerɛ mu di dwuma de PC film a wɔatu ho ama a ɛmma ogya ntumi nhyew di dwuma na wɔsi dodow no so dua wɔ ne kɛse a wɔakyerɛ no so.

So standard clear PC film scratch gyina ano?

Polycarbonate ma ɛyɛ den yiye nanso nea wɔankata so no da so ara tumi twetwe. Ɛsɛ sɛ wɔde polycarbonate film a wɔakata so denneennen a ɛfata di dwuma a ɛhwehwɛ sɛ wɔde abrasion, scratch anaa nnuru a ɛko tia kɛse di dwuma.

Nneɛma bɛn na wɔde wie wɔ soro?

Nneɛma a wubetumi apaw bi ne nea wɔayɛ no fɛfɛɛfɛ, ɛhyerɛn kɛse, ɛyɛ fɛ matte, matte, velvet/textured ne nea wɔapaw a wɔde akata so denneennen. Wobetumi de nneɛma ahorow a wɔaka abom ama wɔ afã abien no so a egyina ade no su so.

So PC film fata ma membrane switch ahorow?

Aane. Polycarbonate film no yɛ nea wɔde di dwuma kɛse ma membrane-switch overlays efisɛ ɛka tintim tumi, toughness, dimensional stability, embossing adwumayɛ ne pii surface finishes bom.

So polycarbonate film fata sɛ wɔde di dwuma wɔ abɔnten?

Abɔnten a wɔde di dwuma no hwehwɛ sɛ wonya UV ne wim tebea a ɛfata. Ɛnsɛ sɛ wɔka standard clear PC film ho asɛm ara kwa sɛ ɛyɛ nea ɛtra hɔ kyɛ wim tebea a enni UV stabilization nhyehyɛe a wɔakyerɛkyerɛ mu ne wim tebea ho ahwehwɛde.

So HSQY betumi de PC film a ɛwɔ nhoma mmobɔwee mu ama?

Aane. HSQY de PC film a ɛwɔ rolls mu ne saa ara nso na sheets ne customized slit rolls ma. Roll trɛw, thickness, core ne packing nhyehyɛe betumi asusuw sɛnea adetɔfo no nsakrae mfiri.

So HSQY betumi de nhwɛsode ahorow ama ansa na wɔayɛ no kɛse?

Wobetumi aka nhwɛsode nhwehwɛmu ho asɛm. Ɛsɛ sɛ adetɔfo sɔ optical hwɛbea, tintim, die cutting, embossing, forming ne finished-part adwumayɛ hwɛ ansa na wɔapene aguadi mu.

Nsɛm bɛn na ɛsɛ sɛ mede ma na ama wɔafa asɛm bi aka?

Yɛsrɛ sɛ fa application, thickness, roll trɛw anaa krataa kɛse, optical ahwehwɛde, soro wie, tintim nhyehyɛe, forming anaa die-twitwa kwan, adwumayɛ ɔhyew, UV anaa ogya-rating ahwehwɛde, hard-coat ahwehwɛde, dodow ne destination ɔman.

Bisa Polycarbonate Film Nhwɛsode ne Bo a Ɛda Hɔ

HSQY de PC film a emu da hɔ ma membrane-switch adwumayɛfo, graphic-overlay converters, printers, electronics adwumayɛfo, kar a wɔde ma, mfiri ayɛfo, label converters ne mfiridwuma mu kyekyɛfo.

Sɛ́ ebia wopɛ PC sini a emu da hɔ a wɔayɛ no fɛfɛɛfɛ ma tintim, matte film ma control panels, textured film ma graphic overlays anaasɛ application-specific UV, FR, optical anaa hard-coated grade, HSQY betumi ahwɛ wo mfiridwuma ahwehwɛde ahorow mu.

Fa wo mfonini, sini ho nkyerɛkyerɛmu a ɛwɔ hɔ dedaw anaa application ahwehwɛde ahorow mena na woabisa mfiridwuma ho nsɛm, nhwɛso ho nsɛm ne adwumayɛbea bo.