FOIL ALU MIN BƐ SƆRƆ Nɛnɛ na PVC FILM

O yɔrɔ in bɛ Se ka Labɛn walasa ka sɛbɛnni Fàra ɲɔgɔn kan, sɛbɛnni janya bɛ Labɛn, o tɛ nɔ Blà yɔrɔ bɛɛ baara la.

O yɔrɔ in bɛ Se ka Labɛn walasa ka sɛbɛnni Fàra ɲɔgɔn kan, sɛbɛnni janya bɛ Labɛn, o tɛ nɔ Blà yɔrɔ bɛɛ baara la.

O yɔrɔ in bɛ Se ka Labɛn walasa ka sɛbɛnni Fàra ɲɔgɔn kan, sɛbɛnni janya bɛ Labɛn, o tɛ nɔ Blà yɔrɔ bɛɛ baara la.

O yɔrɔ in bɛ Se ka Labɛn walasa ka sɛbɛnni Fàra ɲɔgɔn kan, sɛbɛnni janya bɛ Labɛn, o tɛ nɔ Blà yɔrɔ bɛɛ baara la.

 

1. PVC sɛbɛn gɛlɛn ye mun ye furakɛli grade kama?

 

Aluminiyɔmu ye fɛn ɲumanba ye min bɛ kɛ ni fɛn caman ye, min dabɔra Fura ni fura suguya caman na minnu bɛ se ka fɛnw sɛgɛsɛgɛ kosɛbɛ, minnu bɛ ji sɔrɔ kosɛbɛ walima minnu bɛ yeelen bɔ kosɛbɛ, wa u tɛ se ka pake ka ɲɛ ni barikalan plastiki filimuw ye. O jɔli ye aliminiyɔmu papiye ni polimɛri filimuw faralen ɲɔgɔn kan cogo ɲuman na ni aliminiyɔmu layini ye min bɛ sanwiye polimɛri filimu kɔnɔna funteni datugulen ni kɛnɛma dɛmɛnan filimu malɛlen cɛ.

 

Aluminiyɔmu min dilannen don ni nɛnɛ ye, o bɛ alu alu OPA/Al/ PVC sanwiye papiyew dusukun na minnu bɛ kɛ furakɛli kurukuruw kɛli la k’a sababu kɛ u nafa ka bon kosɛbɛ u danma. Aluminiyɔmu, hali ni a janya ye mikron ye, o ye lafiɲɛbɔ ni yeelen balilan ɲuman ye ka fara furakɛli kurukuruw ɲɛnajɛcogo kan.

2.Alu-alu papiye nafa jɔnjɔn jumɛnw bɛ blister packs la?

 

• Jogoɲumanya sɛgɛsɛgɛli gɛlɛnw bɛɛ la walasa ka hakili lafiya sɔrɔ ani ka baara kɛ ni farati tɛ min na
• Lakanali caman ani a marali waati janya
• A bɛ kɛ cogo kelen na, a bɛ se ka da a kan, ani a sɔngɔ ka nɔgɔn
• High Malleability for deep drawing blister cavities (Kurukuruw ja jugumanw) kama
• A bɛ se ka siri ni Vmch basigilen aluminiyɔmu Foil ye
• Foroko minnu bɛ se ka kɛ ka nkalontigɛ kɛlɛ

 

 

3.Nɛnɛ cogoya alu-alu foyi PVC sɛbɛnfura cogoya ye mun ye?

 

HSQY alu alu papiyew bɛ ni danfaralanw ye minnu b’u bila kalasi dɔ kɔnɔ min bɛ danfara don u ni ɲɔgɔn cɛ:
(1) 100% barika bɛ ji, fiɲɛ, gaziw, yeelen na
(2) Foromazi seko camanba minnu tɛ kari, olu bɛ 'zero defect' sabati
(3) Taabolo ɲuman bɛ na ni de-lamination resistance kuntaalajan ye
(4) Kulɛri ni sɛbɛnni sugandicogo caman
(5) Forming characteristics superior
(6) Sumaya sabatili ɲumanba

 

4.Aluminiyɔmu PVC sɛbɛn min dilannen don ni nɛnɛ ye, o janya ka ca ni mun ye?

 

200um(200micron, 0,2mm)
220um(220micron, 0,22mm)
250um(250micron, 0,25mm)------A ka ca a la
300um(300micron, 0,3mm)

 

 

5.Ni an bɛ nin fura in kofɔ, ɲɛfɔli daɲɛ wɛrɛ jumɛn bɛ yen?

 

Alu Alu base Foil spécification
Alu Alu base Foil Épaisseur
alu alu blister papier spécification
Alu Alu blister packaging Alu
Alu blister packing
Alu alu blister structure
alu alu froid forming foil
Alu Alu Foil for pharmaceutical packaging
Alu Alu Foil prix
Alu Alu papier spécification
Alu Alu papier épaisseur
Alu Alu emballage nafa
ALU ALU foroko SlideShare
Alu Alu pake vs blister pake
alu alu pvc
alu baie provence menuiserie alu et pvc salon-de-provence
alu pvc alu papier
alu pvc blister
alu-alu papier for pharmaceutique emballage
Alu-alu kɔrɔ ye
alu-alu emballage ɲɛfɔli
alu-m - alumínios e pvc lda
Aluminiyɔmu Blister papier
aluminium blister foroko
Aluminiyɔmu sɔngɔ
alu-pvdc blister
blister alu-alu pvc
fenetre alu ou alu pvc
opa/alu/pvc/alu blister
pa/alu/pvc/alu
Alu PVC blister foroko