HSQY PVC /PE Laminated Thermoforming Film a Wɔde Yɛ Nneɛma a Ɛyɛ Fɛ

PVC /PE Laminated Thermoforming Film a Wɔde Yɛ Nneɛma a Ɛyɛ Fɛ

HSQY PVC /PE Laminated Thermoforming Film ka rigid PVC structure layer ne polyethylene sealing layer bom ma thermoformed aduane packaging, suppository packaging, unit-dose packaging ne dwumadie foforɔ a ɛhia formability ka ho ne heat-sealing adwumayɛ.

PVC layer no ma rigidity, dimensional stability, impact resistance ne thermoforming tumi, bere a PE layer no ma ɔhyew-seaal contact surface, flexibility ne nsuo a ɛko tia foforɔ.

HSQY de PVC laminate nhyehyeɛ a PVC /PE , PVC /EVOH/PE ne PVC / PVDC /PE ka ho ma . Standard PVC /PE fata ma dwumadie a thermoforming ne sealing ne ahwehwɛdeɛ titire, berɛ a wɔbɛtumi asusu EVOH- anaa PVDC -a ɛwɔ structures mu berɛ a oxygen anaa moisture barrier adwumayɛ a ɛkorɔn kɛseɛ ho hia.

HSQY PVC laminate nsɛm a wɔatintim no kata bɛyɛ 0.1–1.5 mm ne nyinaa mu duru, ne tɛtrɛtɛ a ɛkɔ bɛyɛ 840 mm , ne kɔla a emu da hɔ, tuntum, fitaa anaa nea wɔayɛ no sɛnea wɔpɛ. Ɛsɛ sɛ wɔsi PVC kɛseɛ pɔtee, PE layer, ne tɛtrɛtɛ, core kɛseɛ ne roll nhyehyeɛ so dua ma packaging line a wɔahyɛ da ayɛ no.

Nneɛma a Wɔayɛ no Nsɛntitiriw: PVC /PE Laminated Film | Ɔhyew a wɔde yɛ nneɛma | Ɔhyew-Sealable PE Layer | Peel anaa Weld Nsɔano a Wɔpaw | Aduan a Wɔde Gu Nneɛma Mu | Suppository Nneɛma a Wɔde Gu Nneɛma Mu | Unit-Dose Nneɛma a Wɔde Gu Nneɛma Mu | Amanneɛbɔ Thickness & Width | Clear & Colored Nneɛma a Wobɛpaw | Nneɛma a Ɛwɔ Akwanside a Ɛkorɔn a Ɛwɔ Hɔ

Bisa PVC /PE Nhwɛsode ne Bo a Wɔbɔ

PVC /PE Laminated Sini Video

PVC /PE Laminated Film Nkyerɛkyerɛmu

Nkyerɛkyerɛmu a ɛwɔ aseɛ ha no bɔ HSQY PVC laminate afiri abusua no mua. Ɛsɛ sɛ wɔsi PVC gauge pɔtee, PE kɛseɛ, ne tɛtrɛtɛ, roll weight, roll diameter, core size, winding direction, sealing su ne barrier performance so dua wɔ production specification a wɔapene so no mu.

Nhyehyɛe Hyɛ no nsow: PVC /PE, PVC /EVOH/PE ne PVC / PVDC /PE yɛ laminate nhyehyɛe ahorow a ɛsono akwanside ne dwumadie su. Ɛsɛ sɛ wɔkyerɛ nneɛma din ne ne nhyehyɛe pɔtee no daa wɔ adetɔ ho nsɛm, mfiridwuma ho nsɛm krataa so nsɛm s, nkyerɛwde ne nsɛm a wɔafa aka so.

Bisa Mprempren PVC /PE Nkyerɛkyerɛmu

Dɛn Ne PVC /PE Laminated Film?

PVC /PE laminated film ka thermoformable rigid PVC layer ne polyethylene sealing layer bom. Wɔtaa de ma sɛ rollstock ma nhama a wɔde kyekyere nneɛma a ɛyɛ abura anaa tray ahorow a wɔde di dwuma ansa na wɔahyɛ no ma na wɔde ɔhyew ahyɛ mu.

PVC layer no ma mfiridwuma nhyehyeɛ a ɛhia ma thermoforming, berɛ a PE layer no ma sealing surface na ɛwɔ nkɛntɛnsoɔ wɔ flexibility, opening suban ne resistance to nsuo.

Ɛgyina sɛnea wɔyɛ ne nea wɔde kyekyere nneɛma a wɔhwehwɛ so no, wobetumi de PVC /PE adi dwuma ama aduan a wɔde di dwuma, nnuru a wɔde hyɛ mu, nnuru a wɔde yɛ nnuru unit dodow ne nneɛma afoforo a wɔayɛ.

PVC /PE vs. PET/PE Sini a Wɔabɔ no Laminated

Sɛnea PVC /PE Nhyehyɛe no Yɛ Adwuma

Rigid PVC Nkyekyɛmu Layer

PVC layer a ɛyɛ den no ma formability, dimensional stability ne mfiridwuma nhyehyɛe a ɛwɔ cavity a wɔawie anaa apampan . Ɛsɛ sɛ wɔpaw ne kɛse sɛnea draw depth, package dimensions ne rigidity a wɔhwehwɛ.

PE Nsɔano Layer

PE layer no ma sealing surface ne flexibility foforo. Wobetumi ayɛ no sɛnea wɔayɛ no sɛnea wɔyɛ no sɛnea ɛbɛyɛ a ɛbɛhyɛ so anaasɛ ɛbɛma ayɛ nea wɔahyɛ no den.

Laminated Structure a edi mũ

Ɛsɛ sɛ wɔpaw PVC /PE laminate a wɔawie no sɛ ade a wɔde kyekyere nneɛma a edi mũ sen sɛ wɔbɛpaw PVC ne kɛse nkutoo. Forming bun, seal partner, fill temperature, storage tebea ne akwanside ahwehwɛde nyinaa betumi anya laminate a wɔhwehwɛ no so nkɛntɛnso.

Mfiridwuma Fael a Ɛwɔ Hɔ Dedaw

Kratafa a ɛwɔ hɔ mprempren no ka PET data a edidi so yi a ɛfa biribiara ho krataa so nsɛm . Esiane sɛ wɔakyerɛ saa ade yi sɛ PVC /PE nti, ɛnsɛ sɛ wɔde fael yi di dwuma sɛ ade pɔtee PVC /PE mfiridwuma ho nkyerɛkyerɛmu. Ɛsɛ sɛ adetɔfoɔ bisa mprempren PVC /PE data krataa so nsɛm ne sɔhwɛ nkrataa a ɛfata ma wɔfata.

PET Data Krataa.pdf

Nneɛma atitiriw a ɛwɔ PVC /PE Laminated Film mu

Thermoforming Adwumayɛ a Wɔde Yɛ Adwuma

Rigid PVC ma thermoforming tumi pa ma packaging cavities ne tray ahorow a wɔde di dwuma . Ɛsɛ sɛ ɔhyew tebea, ɔhyew a ɛyɛ hyew, twetwe bun ne onwini yɛ nea eye ma laminate a wɔapaw no.

Ɔhyew-Sealable PE Surface

PE layer no ma sealing surface a ɛhwehwɛ denam lidding a ɛfata anaasɛ laminate structures a ɛne no hyia so. Seal adwumayɛ gyina ɔhyew, nhyɛso, bere a ɛtra hɔ, asase ani ahotew ne aware nneɛma so.

Nneɛma a Wɔde Peelable Packaging Ho Nneɛma a Wobɛpaw

PVC /PE nhyehyeɛ a wɔbɛtumi ayɛ ama peelable packaging wɔ baabi a ɛhia sɛ wɔbue a wɔahyɛ so, a suppository ne unit-dose dwumadie a wɔapaw ka ho.

Nsuo Ho Ahobammɔ

PE layer no boa ma nsu a ɛko tia. Baabi a nkwa nna gyina nsuo-nsuo akwansideɛ a wɔakyerɛkyerɛ mu so no, bisa dodoɔ WVTR data ma laminate adansiɛ no pɛpɛɛpɛ.

Nkɛntɛnso ne Flexural Adwumayɛ

PVC ma nhyehyeɛ ahoɔden a wɔde yɛ, hyɛ, nsɔano ne dwumadie. Ɛsɛ sɛ wɔhwɛ sɛnea wɔde nneɛma a wɔawie no yɛ adwuma yiye wɔ nneɛma a wɔde susuw nneɛma ne abura nhyehyɛe a wɔahyɛ da ayɛ no so.

PVC /PE Laminated Film Dwumadie

Suppository Nneɛma a Wɔde Gu Nneɛma Mu

PVC /PE laminate yɛ nea wɔde di dwuma kɛse ma suppository packaging a ɛfata baabi a package no hwehwɛ thermoformability, sealing ne controlled opening. Ɛsɛ sɛ wɔde aduru no hyia, ɔhyew a wɔde hyɛ mu ne bere tenten a wɔde ahyɛ mu no mudi mu kura no tom ne nea wɔayɛ no ankasa.

Nnuruyɛ Unit-Dose Packaging

PVC /PE betumi asusuw ho sɛ ɛyɛ nsu anaa fã-nsu unit-dose packaging a ɛfata wɔ thermoform-fill-seal mfiri so. Sɛnea ɛfata pɛpɛɛpɛ no gyina aduru no mu nnuruyɛ, nsɔano tebea ne akwanside adwumayɛ a wɔhwehwɛ so.

Nam a Wɔayɛ no Foforo na Wɔayɛ no Foforo

PVC /PE grades a wɔapaw no betumi ayɛ thermoformed ama nam ne processed-food packaging baabi a formulation a wɔapene so, PE contact layer, sealing system ne food-contact documentation ne application no hyia.

Nkokoaa, Mpataa ne Cheese a Wɔde Gu Nneɛma Mu

PVC /Wobetumi nso asɔ PE laminates ahwɛ sɛ nkokɔ, mpataa, kyiisi, pasta ne nnuan afoforo a ɛhwehwɛ sɛ wɔde thermoforming ne ɔhyew sealing.

Vacuum ne Modified-Atmosphere Nneɛma a Wɔde Gu Mu

Baabi a ɛho hia sɛ wɔde vacuum anaa modified-atmosphere packaging hyɛ mu no, kyerɛkyerɛ oxygen a wɔde bɛkɔ, nsuo a wɔde bɛkɔ, gas a ɛwɔ mu ne shelf life a wɔde asi wɔn ani so. Akwanside a ɛkorɔn PVC /EVOH/PE anaa PVC / PVDC /PE nhyehyɛe ahorow betumi afata sen gyinapɛn PVC /PE.

Hwehwɛ mu HSQY PVC laminate film range ma PVC /PE foforo ne akwanside a ɛkorɔn nhyehyɛe.

PVC /PE Sini Dwumadi Mfonini

PVC /PE ne PVC /EVOH/PE ne PVC / PVDC /PE

Sɛnea Wɔpaw PVC /PE Laminated Film

Nneɛma a wɔde kyekyere nneɛma: Kyerɛ sɛ wɔde laminate no bɛyɛ suppositories, pharmaceutical unit doses, nam, nkokɔ, mpataa, cheese anaa ade foforo.

Total thickness: Fa laminate thickness a wɔhwehwɛ ne tolerance ma sɛnea cavity bun, rigidity ne mfiri ahwehwɛde.

PVC ne PE layers: Kyerɛ ankorankoro layer ahwehwɛdeɛ wɔ baabi a wonim sen sɛ wode wo ho bɛto ne nyinaa kɛseɛ nko ara so.

Roll trɛw: Ma wɛb trɛw pɛpɛɛpɛ ne slitting tolerance a thermoforming anaa packaging line no hwehwɛ.

Core ne roll size: Ma core diameter, roll mu duru a wɔpɛ ne maximum outside diameter.

Winding configuration: Si so dua sɛ ɔfasu bɛn na ɛsɛ sɛ ɛhwɛ mu anaa akyi sɛnea afiri no nhyehyɛe te.

Forming ahwehwɛde: Ma cavity nsusuwii, twetwe bun, nkuku nhyehyɛe, mfiri nhwɛso ne line ahoɔhare.

Nsɔano ahwehwɛde: Kyerɛ nsɔano adwumayɛ a ɛtumi yiyi anaasɛ ɛyɛ den na kyerɛ awareɛ nneɛma anaa nkatasoɔ nhyehyɛɛ.

Akwanside ahwehwɛde: Fa OTR ne WVTR a wɔde asi wɔn ani so ma sɛ oxygen anaa nsuo a ɛkɔ nipadua no mu no ka nneɛma a ɛyɛ den anaa ne nkwa nna a wɔde sie.

Tebea horow a wɔde hyɛ mu ma: Sɛ wopɛ nnuru a wɔde yɛ nsu anaa nea wɔde hyɛ mu a, fa aduru no hyew ne nnuru anaa nea ɛne ne ho hyia ho nsɛm a ɛfata ma.

Destination market: Ka ɔman anaa ɔmantam a wɔde package no bedi dwuma sɛnea ɛbɛyɛ a wobetumi ahwɛ nkrataa a ɛfata mu.

Ka Wo PVC /PE Packaging Dwumadie no ho nkɔmmɔ

Sɛnea Wobɛma PVC /PE Film no ayɛ nokware Ansa na Wɔayɛ no pii

Thermoforming Sɔhwɛ a Wɔde Yɛ Adwuma

Fa nneɛma no tu mmirika wɔ afiri ankasa no so na fa nkuku no. Hwɛ ɔhyew biakoyɛ, cavity nkyerɛase, ntwea so kɛse, shrinkage, flange flatness ne trimming adwumayɛ.

Nsɔano-Mfɛnsere Sɔhwɛ

Sɔ ɔhokafo a wɔpɛ sɛ wɔde nsɔano no hwɛ wɔ ɔhyew, nhyɛso ne bere a ɛfata mu na ama woanya mfɛnsere a ɛyɛ den a wɔde yɛ nneɛma.

Peel ne Seal Ahoɔden

Sɛ wopɛ nneɛma a wɔde kyekyere nneɛma a wotumi yi ho a, susuw tumi a ɛbue ne sɛnea ɛyɛ pɛpɛɛpɛ no ho. Sɛ wopɛ nsɔano a ɛyɛ den a, si nsɔano ahoɔden ne nneɛma a wɔde ahyɛ mu no mudi mu kura so dua wɔ tebea horow a wɔhwɛ kwan sɛ wɔde besie ne nea wɔde fa so mu.

Akwanside Ho Nhwehwɛmu

Sɛ nneɛma a ɛyɛ den gyina oxygen anaa nsuo ho banbɔ so a, hwɛ sɛ OTR ne WVTR yɛ nokware ma laminate no pɛpɛɛpɛ wɔ ɔhyew ne nsuo a ɛfata mu.

Nneɛma a Wɔde Yɛ Adwuma

Sɛ wopɛ nnuru anaa aduruyɛ ho nneɛma a wɔde kyekyere nneɛma a, sɔ laminate no hwɛ sɛnea wɔyɛ no ankasa na wɔde hyɛ mu ma. Hwɛ sɛnea package no te, seal integrity, migration anaa compatability ahwehwɛde ne storage stability sɛnea ahwehwɛde nhyehyɛe a ɛwɔ hɔ no te.

PVC /PE Krataa ne Roll Packing ho nsɛm

Nhwɛsoɔ a Wɔde Gu Mu: Wobetumi abɔ nhwɛsoɔ krataa so nsɛm s ho ban wɔ nkotokuo ne nnaka a ɛfata mu sɛdeɛ mprempren nhwɛsoɔ nsɛm teɛ.

Krataa a Wɔde Gu Mu: Nsɛm dedaw a wɔatintim no kyerɛ bɛyɛ kilogram 30 wɔ kotoku biara mu ma nneɛma bi a ɛyɛ den- krataa so nsɛm . Ɛsɛ sɛ wosi nneɛma a wɔde ahyɛ mu ankasa so dua sɛnea ne kɛse ne ne kɛse te.

Roll Packing: Si roll trɛw, core kɛse, roll mu duru, abɔnten diameter, winding akwankyerɛ ne ahobammɔ wrapping ma paw specification.

Pallet Packing: Nsɛm dedaw a wɔatintim no kyerɛ bɛyɛ 500–2000 kg wɔ plywood pallet biara mu. Ɛsɛ sɛ wɔsi mprempren pallet loading so dua sɛnea roll size, shipment anohyeto ne destination ahwehwɛde ahorow te.

Container Loading: Nsɛm dedaw a wɔatintim no twe adwene si bɛyɛ tɔn 20 so ma nneɛma bi a wɔde mena. Nneɛma a wɔde bɛkɔ ankasa no gyina pallet nhyehyɛe, ade a wɔde gu mu no su, ɔkwan a wɔfa so ne anohyeto ahorow a ɛfata a wɔde bɛkɔ-mu duru so.

Production Lead Time: Nsɛm a wɔatintim dedaw a wɔde gyina hɔ ma bɛyɛ adwuma nnafua 10–14. Si mprempren adeyɛ nhyehyɛe no so dua bere a wɔawie nneɛma nhyehyɛe, dodow, nhwɛsode a wɔpene so ne nneɛma a wɔde kyekyere nneɛma a wɔhwehwɛ no awie no.

Delivery Terms: Nneɛma a wɔatintim no bi ne EXW, FOB, CNF ne DDU. Fa mprempren quotation no si bere a ɛfata a wɔde bɛmena no so dua.

Bisa Packing ne Container Loading Data

Nsɛmmisa a Wɔtaa Bisa Fa PVC /PE Laminated Film ho

Dɛn ne PVC /PE laminated sini?

PVC /PE laminated film ka thermoformable rigid PVC layer ne polyethylene sealing layer bom. Wɔde di dwuma ma nneɛma a wɔde kyekyere nneɛma a wɔayɛ a ɛhwehwɛ sɛ ɛyɛ den wɔ ɔdan no mu ne tumi a wɔde hyɛ ɔhyew mu.

Dɛn na wɔde PE layer no di dwuma?

PE layer no ma ɔhyew-sealable soro, flexibility ne nsuo a ɛko tia. Ne nhyehyɛe nso betumi anya peelability ne opening adwumayɛ so nkɛntɛnso.

So wobetumi ayɛ PVC /PE sini no thermoformed?

Aane. PVC /PE laminated film no yɛ nea wɔayɛ ama thermoforming dwumadie a ɛfata. Ɛsɛ sɛ wɔyɛ tebea a wɔde yɛ adwuma no yiye ma ne kɛseyɛ nyinaa, PVC nsusuwii, abura no mu dɔ ne mfiri nhyehyɛe.

So wobetumi de PVC /PE adi dwuma ama suppository packaging?

Aane. PVC /PE yɛ nea wɔde di dwuma kɛse ma suppository packaging a ɛfata wɔ baabi a ɛho hia sɛ wɔyɛ thermoforming, sealing ne controlled opening. Ɛsɛ sɛ wɔde suppository formulation ankasa ne tebea horow a wɔde hyɛ mu no di ade a wɔawie no ho adanse.

So wobetumi de PVC /PE adi dwuma ama nnuru a wɔde yɛ unit doses?

PVC /PE betumi asusuw ho sɛ ebia nnuru a wɔde ahyɛ mu a ɛfata, a nsu ne nsu fã a wɔapaw ka ho. Ɛsɛ sɛ wɔsi nea ɛne ne ho hyia, nsɔano no mudi mu kura, akwansideɛ ahwehwɛdeɛ ne nkrataa a ɛfa ho no so dua ma dwumadie no pɛpɛɛpɛ.

Nneɛma a ɛyɛ den bɛn na ɛwɔ hɔ?

HSQY a wɔatintim PVC laminate abusua no kata bɛyɛ 0.1–1.5 mm. Ɛsɛ sɛ wɔsi PVC /PE nhyehyeɛ pɔtee, ne nyinaa mu duru ne ne tolerance so dua sɛdeɛ packaging project no teɛ.

Ntrɛwmu bɛn na ɛwɔ hɔ?

HSQY mprempren PVC laminate nsɛm tintim ntrɛwmu a ɛkɔ bɛyɛ 840 mm. Si ntrɛwmu pɔtee ne slitting tolerance a ɛho hia ma production line no so dua.

So PVC /PE wɔ kɔla ahorow mu?

Aane. HSQY tintim akwan a emu da hɔ, tuntum ne fitaa a wɔpaw wɔ ne PVC laminate nhyehyɛe no mu, a kɔla afoforo a wɔahyɛ da ayɛ no gyina nhyehyɛe ne dodow a wɔkra so.

So PVC /PE tumi yiyi?

PVC /PE nhyehyeɛ no bɛtumi ayɛ ama peelable opening wɔ baabi a ɛhia. Ɛsɛ sɛ wɔde peel ahoɔden ne consistency di ho adanse ne ankasa package design ne sealing tebea horow.

So PVC /PE betumi ama oxygen akwanside a ɛkorɔn?

Ɛnsɛ sɛ wɔde Standard PVC /PE di dwuma ankasa sɛ akwanside a ɛkorɔn sen biara. Sɛ ɛho hia sɛ oxygen a ɛba fam a wɔakyerɛkyerɛ mu no, PVC /EVOH/PE, PVC / PVDC /PE anaa akwanside nhyehyɛe foforo a wɔagye atom no betumi afata kɛse.

Nsonsonoe bɛn na ɛwɔ PVC /PE ne PVC /EVOH/PE ntam?

PVC /PE titiriw de thermoformable PVC ne PE sealing layer bom. PVC /EVOH/PE de EVOH layer ka ho ma ɛma oxygen-akwanside adwumayɛ kɛseɛ kɛseɛ berɛ a wɔakyerɛ no yie.

Nsonsonoe bɛn na ɛwɔ PVC /PE ne PVC / PVDC /PE ntam?

PVC / PVDC /PE de PVDC ka ho sɛ akwanside fã foforo na wobetumi asusuw ho ama dwumadie a ɛhia nsuo anaa mframa ahobanbɔ a ɛkorɔn sene gyinapɛn PVC /PE.

So wobetumi de PVC /PE adi dwuma de ayɛ aduan a wɔde kyekyere nneɛma?

Wobetumi asusuw PVC /PE nhyehyeɛ a wɔapaw no ho ama aduane a wɔde kyekyere nneɛma wɔ baabi a PE nkitahodiɛ no ani, ne nhyehyɛɛ a ɛdi mũ ne aduane a ɛka ho nkrataa a ɛwɔ hɔ no fata ma aduane, ɔhyeɛ ne baabi a wɔrekɔ gua a wɔahyɛ da ayɛ.

Akwanside data bɛn na ɛsɛ sɛ mebisa?

Sɛ shelf nkwa gyina akwanside adwumayɛ so a, bisa OTR ne WVTR gyinapɛn a wɔasusuw ma laminate no pɛpɛɛpɛ wɔ ɔhyew ne ɔhyew sɔhwɛ tebea horow a ɛfata mu.

Dɛn ne dodow a ɛba fam koraa a wɔkra?

Mprempren HSQY PVC /PE nneɛma abusua no tintim dodow a wɔkra a ɛba fam koraa a ɛbɛyɛ kilogram 1,000. Amanneɛbɔ nhyehyɛe, kɔla anaa nsusuwii betumi ahwehwɛ sɛ ɛsono dodow a ɛba fam koraa.

So metumi abisa nhwɛsode ahorow?

Aane. Wobetumi asusuw nhwɛsode ahorow ho ama wɔadi kan ayɛ su, thermoforming ne sealing nhwehwɛmu. Wɔkamfo kyerɛ sɛ wɔnsɔ nneɛma a wɔyɛ no hwɛ ansa na wɔapene laminate nhyehyɛe foforo so.

Dɛn na ɛsɛ sɛ mesɔ hwɛ ansa na mapene PVC /PE sini no so?

Hwɛ thermoforming suban, cavity nkyerɛase, ɔfasu-thickness kyekyɛ, dimensional stability, seal window, peel anaa seal ahoɔden, package mudi mu kura, akwanside adwumayɛ wɔ baabi a ɛho hia ne nea ɛne ade a wɔakyekyere no hyia.

Nsɛm bɛn na ɛsɛ sɛ mede ma na ama wɔafa asɛm bi aka?

Fa nhyehyeɛ a wɔhwehwɛ, ne nyinaa mu duru, PVC ne PE layer ahwehwɛdeɛ, ne tɛtrɛtɛ, roll dimensions, core size, kɔla, forming depth, sealing requirement, packaged product, barrier target, dodoɔ, destination market ne documentation a wɔhwehwɛ ma.

Ɛfa HSQY Plastic Kuw ho

HSQY Plastic Kuo no de plastic a ɛyɛ den krataa so nsɛm , thermoforming film ne laminated packaging materials ma aguadifoɔ a wɔtɔ, packaging converters, nnuan a wɔyɛ, nnuru a wɔde kyekyere nnwuma, wɔn a wɔkyekyɛ ne amanaman ntam nneɛma a wɔde ba amannɔne.

HSQY laminate range no bi ne PVC /PE, PVC /EVOH/PE, PVC / PVDC /PE, PET/PE ne nhyehyeɛ foforɔ a wɔayɛ ama aduane, nnuru ne mfiridwuma mu nneɛma a wɔde kyekyere nneɛma.

HSQY wɔ Amanaman Ntam Nnwumayɛbea Ɔyɛkyerɛ ahorow ase

Nneɛma a Ɛyɛ Pa ne Nneɛma a Wɔyɛ ho Nwoma

Bisa sɛ wɔmfa ne bo nkyerɛ ma PVC /PE Laminated Film

Worehwehwɛ PVC /PE laminated film ma suppositories, nnuru unit doses, thermoformed aduan packaging anaasɛ application foforo a ɛfata? Send HSQY wo hwehwɛ nhyehyɛe, thickness, trɛw, roll specification, forming bun, sealing ahwehwɛde, akwanside botae, dodow ne destination gua.

Di HSQY nkitaho na woanya Nhwɛsode ne Nneɛma Bo a Wɔbɔ