HSQY 1mm Transparent GAG PET plastic krataa ma Ɔhyew a Wɔde Yɛ Ɔhyew

1mm Transparent GAG PET plastic krataa ma Thermoforming ne Nneɛma a wɔde kyekyere nneɛma

HSQY 1mm transparent GAG PET krataa so nsɛm yɛ polyester a ɛwɔ ntoatoasoɔ mmiɛnsa co-extruded krataa so nsɛm a wɔayɛ ama thermoforming, clear packaging, folding boxes, blister packaging, display components ne dwumadie foforɔ a ɛhwehwɛ sɛ ɛkari pɛ wɔ pefeeyɛ, toughness, rigidity ne processing adwumayɛ mu.

GAG krataa so nsɛm de PETG /A PET/PE TG A/B/A nhyehyeɛ di dwuma . PETG soro layers no ma application-specific forming ne fabrication mfaso, bere a APET core no boa rigidity na ɛboa ma wɔhwɛ nneɛma bo so sɛ wɔde toto PETG adansi a edi mũ ho a.

HSQY mprempren de GAG krataa so nsɛm ma wɔ ne kɛse fi 0.15mm kosi 3mm , a roll trɛw fi 110mm kosi 1280mm ne standard cut- krataa so nsɛm formats a 915×1220mm ne 1000×2000mm ka ho. Wobetumi aka ntrɛwmu a wɔahyɛ da ayɛ, krataa so nsɛm nsusuwii, kɔla ne packing nhyehyɛe ho asɛm ama nnwuma akɛse.

Wɔ thermoforming nnwuma ho no, ɛsɛ sɛ adetɔfo si so dua sɛ forming bun, nkuku geometry, ɔhyew tebea, krataa so nsɛm thickness tolerance, roll configuration ne finished-product ahwehwɛde ansa na wɔayɛ no pii. Wɔkamfo nhwɛsode sɔhwɛ ahorow kyerɛ wɔ nnwinnade ankasa no so ma dwumadie a ɛyɛ den anaasɛ ɛyɛ deep-draw.

       Bisa GAG PET plastic krataa Nsɛm a wɔafa aka    

Dɛn Ne GAG PET plastic krataa ?

GAG PET krataa so nsɛm , a wɔsan frɛ no PETG /A PET/PE TG krataa so nsɛm anaa G- PET -G krataa so nsɛm , yɛ polyester a wɔaka abom krataa so nsɛm a ɛyɛ PETG akyi ntoatoaso ne APET tintiman.

Wɔayɛ saa adansi yi sɛ ɛbɛka PETG no ani ne nwene su a wɔapaw ne APET a ɛyɛ den ne ɛka a wɔbɔ no yiye no abom. Wɔtaa susuw ho bere a gyinapɛn APET mma forming, bending, bonding anaa impact adwumayɛ a ɛdɔɔso, nanso PETG krataa so nsɛm a edi mũ no ho nhia wɔ sikasɛm mu.

GAG ho wɔ mfasoɔ titire ma nnoɔma a wɔde kyekyere nneɛma a ɛda adi pefee a nneɛma a wɔhunu, nhyehyɛɛ a ɛyɛ papa ne adwumayɛ akyi dwumadie ho hia.

Sɛnea PETG /A PET/PE TG Nhyehyɛe no Yɛ Adwuma

1mm Transparent GAG PET plastic krataa Mfonini

GAG PET plastic krataa Nkyerɛkyerɛmu

Nsɛm a edidi so yi gyina HSQY nneɛma ho nsɛm a ɛwɔ hɔ mprempren no so. Ɛsɛ sɛ wɔsi awieɛ thickness tolerance, layer ratio, optical properties, roll dimensions ne application-specific ahwehwɛdeɛ so dua ma production grade a wɔapaw no.

Dɛn Nti na Wopaw 1mm GAG krataa ?

1mm GAG krataa so nsɛm ma ahoɔden kɛse sen nneɛma a wɔde kyekyere nneɛma a ɛyɛ tratraa bere a ɛda so ara fata ma thermoforming, folding, display ne ahobammɔ dwumadie pii.

Wobetumi asusuw ho ama afã akɛse a wɔayɛ no thermoformed, rigid folding-box components, transparent protective panels, display products ne dwumadie a ɛwɔ baabi a packaging a ɛyɛ tratraa paa krataa so nsɛm mma stiffness a ɛdɔɔso.

Ɛsɛ sɛ wɔda so ara kyerɛ ne kɛse a ɛfata fi ɔfã a wɔawie no kɛse, abura no mu dɔ, adesoa, stiffness ahwehwɛde ne ɔkwan a wɔfa so dannan no mu sen sɛ wɔbɛpaw 1mm esiane sɛ ɛyɛ ade a wɔahyɛ da ayɛ nkutoo nti.

Nneɛma Titiriw a Ɛwɔ GAG PET plastic krataa

Nsɛm a Wɔka Kyerɛ a Ɛkorɔn

Transparent GAG PET krataa so nsɛm ma wotumi hu nneɛma a ɛkorɔn ma nneɛma a wɔde kyekyere nneɛma a emu da hɔ, nnaka a wɔbobɔw, akisikuru, nneɛma a wɔde kyerɛ ne ahobammɔ dwumadie. Baabi a optical adwumayɛ ho hia no, ɛsɛ sɛ adetɔfo kyerɛ hann a wɔhwehwɛ sɛ wɔde fa, ahum ne sɛnea ɛte.

Thermoforming Adwumayɛ a Ɛtu mpɔn

PETG surface layers no betumi ama GAG ayɛ mmerɛw sɛ wobedi ho dwuma sen standard APET wɔ application ahorow a ɛfa draws a emu dɔ, sharp corners anaa forming geometry a ɛhwehwɛ pii ho.

Toughness ne Rigidity a Ɛkari pɛ

GAG ka PETG abɔnten layers ne APET core bom de kari pɛ wɔ impact adwumayɛ, surface processability ne structure stiffness.

Asiane a Ɛwɔ Adwennwen Ho Fitaa a Ɛtew So

Wɔ dwumadie a ɛfa bends a ɛyɛ den anaa geometry a ɛyɛ den sɛ wɔbɛhyehyɛ mu no, PETG sorosoro no bɛtumi aboa ama mpaapaemu anaa nhyɛsoɔ fitaa so ate sɛ wɔde toto adeɛ a ɛnyɛ bɔne fafiri ho a. Ɛsɛ sɛ wɔde nhyehyɛe a wɔawie no di dwuma de si adwumayɛ ankasa so dua.

Fabrication Adwumayɛ Pa

Wobetumi atwitwa GAG grade ahorow a ɛfata, atwa no awu, atutu, abɔ mu, ayɛ no thermoformed na wɔayɛ no ayɛ no nneɛma a wɔde kyekyere nneɛma anaa mfiridwuma mu nneɛma. Tebea ahorow a wɔde yɛ adwuma no gyina ne kɛse ne geometry a wɔawie so.

Ntintim ne Nneɛma a Wɔde Siesie

GAG betumi asusuw ho ama tintim ne ahosiesie dwumadie. Ɛsɛ sɛ wɔsɔ ink adhesion, surface treatment ne printing kwan no hwɛ wɔ ankasa production krataa so nsɛm ansa na wɔadan no kɛse.

Bonding ne Folding Nnwuma a Wɔde Di Dwuma

PETG akyi layers no betumi ama mfasoɔ a ɛwɔ soro su ama folding-box fabrication ne bonding akwan a wɔapaw. Ɛsɛ sɛ wɔde adhesive anaa sealing compatibility hwɛ denam adhesive ankasa, nnwinnade ne package design no so.

Nnuru a Ɛko Tia

Polyester krataa so nsɛm ma mfasoɔ a ɛko tia nneɛma pii a wɔhyia wɔ berɛ a wɔde nneɛma gu mu ne nea wɔde kyerɛ no daa. Ɛsɛ sɛ wɔsɔ nnuru a ɛne ne ho hyia hwɛ bere a krataa so nsɛm no bɛka nneɛma a wɔde tew nneɛma ho a wɔahyɛ no den, nnuru a wɔde siw ano anaa nnuru a ano yɛ den ho.

PET -Gyina Multilayer Adansi

PETG ne APET ka polyester nneɛma abusua no ho. Eyi betumi ama nneɛma a ɛne ne ho hyia no ayɛ mmerɛw sɛ wɔde toto nhyehyɛe ahorow a ɛka polymer mmusua a enni abusuabɔ bom ho a, nanso sɛnea wobetumi asan de adi dwuma ankasa no da so ara gyina mpɔtam hɔ nneɛma a wɔboaboa ano, hyehyɛ, nneɛma a wɔde ka ho, nkyerɛwde, ink ne nneɛma a wɔde di dwuma bio so.

GAG PET plastic krataa Nnwuma a wɔde di dwuma

Thermoforming ne Vacuum a Wɔde Yɛ Adwuma

GAG krataa so nsɛm wobetumi de adi dwuma ama vacuum-formed ne thermoformed afã horow a ɛho hia sɛ ɛda adi pefee, ahotoso forming ne impact adwumayɛ.

Blister ne Clamshell Nneɛma a Wɔde Gu Nneɛma Mu

Wobetumi asusuw GAG a ɛda adi pefee ho ama adetɔnbea akisikuru ne clamshells, titiriw baabi a ɛho hia sɛ wɔyɛ no mu dɔ, wɔtew mpaapaemu so anaasɛ wɔma ɛyɛ adwuma yiye wɔ soro bere a wɔde toto gyinapɛn APET ho no.

Nnaka a Wɔbobɔw a Popa

GAG krataa so nsɛm fata ma nnaka a wɔbobɔw a emu da hɔ a wɔde yɛ ahosiesie, akyɛde, nneɛma a wɔde di dwuma, nneɛma a wɔde kyerɛw ne nneɛma a wɔtɔn wɔ sotɔɔ mu bere a nea ɛda adi pefee ne adwumayɛ a ɛho tew a wɔbobɔw ho hia.

Ɛlektrɔnik ne Nneɛma a Wɔde Bɔ Nneɛma Ho Ban

Wobetumi de nneɛma no ayɛ ahobammɔ packs a ɛda adi pefee ne inserts a wɔayɛ ama ɛlɛtrɔnik ne nneɛma a wɔde di dwuma wɔ baabi a ɛho hia sɛ ɛko tia nkɛntɛnso ne nneɛma a wotumi hu.

Nsɛnkyerɛnne ne Nneɛma a Wɔde Kyerɛkyerɛ

GAG wobetumi de adi dwuma ama dan mu nsɛnkyerɛnne, ɔyɛkyerɛ panels, nneɛma a wɔatintim, POP nkyerɛkyerɛmu ne aguadi nneɛma a ɛda adi pefee.

Kaad ne Plastik Nneɛma a Wɔatintim

Wobetumi asusuw GAG krataa so nsɛm adansi a wɔapaw no ho ama kaad ne printed-plastic dwumadie a ɛhia sɛ ɔfasuo no yɛ papa, ɛyɛ den ne dwumadie a ɛyɛ den.

Furniture ne Fabricated Panels a Wɔde Yɛ Nneɛma

Wobetumi asusuw GAG krataa so nsɛm s a ɛyɛ den ho ama dan mu nneɛma a emu da hɔ, mpaapaemu, mfiri a wɔde siw ano ne afã afoforo a wɔayɛ a ɛyɛ mmerɛw bere a nneɛma no su di nneɛma a wɔawie a wɔhwehwɛ no ho dwuma.

GAG PET plastic krataa Dwumadie Mfonini

GAG PET plastic krataa ne APET ne PETG ntam.

Ɛnsɛ sɛ wobu GAG sɛ ɛyɛ APET anaa PETG aplikeshɔn biara ananmu kɛkɛ. Nneɛma a ɛfata sen biara no gyina forming complexity, rigidity, impact requirement, surface processing ne project cost so.

Bere bɛn na Ɛsɛ sɛ Wopaw GAG Sen sɛ APET ?

GAG fata sɛ wɔsɔ hwɛ bere a APET package a ɛyɛ gyinapɛn no nya mpaapaemu, adwennwen a ɛyɛ fitaa, ɛyɛ den sɛ ɛbɛbobɔ, ɛnyɛ nea ɛkyekyere yiye anaasɛ ɛnyɛ pɛpɛɛpɛ a ɛyɛ wɔ abura a emu dɔ anaa ɛyɛ den mu.

Sɛ amanne kwan so APET de forming adwumayɛ a wogye tom, pefeeyɛ ne finished-package ahoɔden ma dedaw a, APET betumi akɔ so ayɛ nea sikasɛm mu mfaso wɔ so kɛse.

Bere Bɛn na Ɛsɛ sɛ Wopaw GAG Sen sɛ Wobɛpaw PETG ?

Wɔtaa paw PETG a edi mũ bere a ɛho hia sɛ wɔyɛ thermoforming a ɛyɛ mmerɛw kɛse, tumi a ɛtwetwe kɔ akyiri, nkɛntɛnso a ɛyɛ den anaasɛ ɛyɛ adwuma a wɔyɛ no.

GAG betumi ayɛ ɔkwan foforo a mfaso wɔ so bere a PETG soro su no yɛ mfaso nanso dwumadie no nhia PETG wɔ krataa so nsɛm kɛseɛ no nyinaa mu. APET core no betumi ama rigidity foforo na ama ɛka a wɔbɔ no atu mpɔn.

Ɔhyew a wɔde yɛ nneɛma GAG PET plastic krataa

GAG krataa so nsɛm wobetumi de mfiri a wɔde yɛ thermoforming a wɔtaa de di dwuma adi dwuma, nanso nea edi mu no gyina ɔfã a wɔawie no geometry, krataa so nsɛm kɛse, ɔhyew ho nsɛm, ɔkwan a wɔfa so yɛ ne nkuku nhyehyɛe so.

Roll vs Cut Krataa a Wɔde Ma

GAG krataa Nwoma mmobɔwee

Roll a wɔde ma no fata ma thermoforming a ɛkɔ so, blister production ne high-volume automatic converting lines. Ɛsɛ sɛ adetɔfo kyerɛ ne tɛtrɛtɛ, core diameter, roll diameter a ɛsen biara, roll mu duru a ɛsen biara ne winding ahwehwɛde ahorow.

Twitwa GAG krataa s

Cut krataa so nsɛm s fata ma nnaka a wɔbobɔw, tintim, ɔyɛkyerɛ, nhwɛsode, krataa so nsɛm -fed thermoforming ne fabricated components. Mprempren gyinapɛn formats no bi ne 915×1220mm ne 1000×2000mm, a customized dimensions wɔ hɔ.

Sɛnea Wobɛpaw Nea Ɛfata GAG PET plastic krataa

1. Si Ade a Wɔawie no so dua

Ka kyerɛ HSQY sɛ ebia wɔbɛdan ade no ayɛ no blister, clamshell, folding box, apampan , display panel, protective cover anaa ade foforo a wɔayɛ.

2. Paw Krataa a Ɛyɛ Den

Mprempren nea ɛwɔ hɔ no yɛ 0.15–3mm. Fa stiffness a wɔhwehwɛ, ɔfã dimensions ne forming bun ma bere a worepaw gauge.

3. Paw Roll anaa Sheet Format

Mfiri a wɔde yɛ thermoforming a ɛkɔ so no taa de nhoma mmobɔwee di dwuma, bere a tintim, mpopaho ne fabrication adwuma taa de cut krataa so nsɛm s di dwuma.

4. Si Forming Depth ne Geometry so dua

Fa mfonini anaa nhwɛsode a wɔawie ma bere biara a adwuma no fa abura a emu dɔ, ntwea teateaa anaa nneɛma a ɛho hia a wɔtrɛw ho.

5. Kyerɛkyerɛ Optical Ahwehwɛde ahorow mu

Sɛ nea ɛda adi pefee ho hia a, kyerɛ ahum a wogye tom, hann a ɛkɔ, ɔfasu no so sintɔ ne kɔla a ɛyɛ pɛpɛɛpɛ sen sɛ wode wo ho bɛto asɛmfua 'pete.' nkutoo so.

6. Si Printing anaa Bonding no so dua

Fa ink nhyehyɛe, adhesive, folding anaa bonding kwan no ma sɛnea ɛbɛyɛ a wobetumi asusuw krataa so nsɛm soro ankasa ho ansa na wɔayɛ.

7. Si Mmarahyɛ Ahwehwɛde ahorow so dua

Sɛ wɔde krataa so nsɛm no bedi dwuma ama aduane, aduruyɛ anaa dwumadie foforɔ a wɔahyɛ ho mmara a, bisa mprempren adeɛ pɔtee ho nkrataa ma grade pɔtee no sene sɛ wobɛfa no sɛ GAG krataa so nsɛm biara wɔ mmara sodiɛ a ɛyɛ pɛ.

Quality Parameters Ɛsɛ sɛ Adetɔfo Kyerɛ

Nsɛm a Ɛho Hia ma GAG PET plastic krataa Nsɛm a Wɔafa Ka

Sɛ wopɛ sɛ wunya nsɛm a wɔafa aka ntɛmntɛm na ɛyɛ nokware a, fa nsɛm a edidi so yi ma:

• Finished product ne dwumadie

• Ɛho hia sɛ GAG krataa so nsɛm ne kɛse

• Roll trɛw anaa cut- krataa so nsɛm nsusuwii

• Ahwehwɛde a ɛyɛ transparent anaa kɔla

• Roll core diameter ne maximum roll diameter

• Maximum roll mu duru

• Thermoforming afiri a wɔde yɛ adwuma no su

• Forming kwan ne forming depth

• Product drawing anaa nhwɛsode

• Printing, folding anaa bonding ahwehwɛde ahorow

• Nneɛma a wɔde hwɛ ade a wɔhwehwɛ

• Mmara anaa nea ɛyɛ papa ho nkrataa a wɔhwehwɛ

• Order dodow ne afe afe a wɔde di dwuma

• Packing ahwehwɛde

• Ɔman a wɔrekɔ ne hyɛn gyinabea

       Nya GAG PET plastic krataa Bo & Nhwɛsode    

Nneɛma a Wɔde Gu Mu ne Nea Wɔde Kɔma

Nhwɛsoɔ a wɔde kyekyere nneɛma: Wobetumi de A4-size krataa so nsɛm s ahyɛ nkotokuo a ɛbɔ ho ban anaa nnaka mu de ayɛ nneɛma ne dwumadie ho nhwehwɛmu.

Sheet Packing: Mprempren fibea ho nsɛm no kyerɛ bɛyɛ 30kg wɔ package biara mu, a customized packing wɔ hɔ sɛnea ne kɛse, ne kɛse ne order ahwehwɛde ahorow te.

Pallet Packing: Mprempren nsɛm kyerɛ bɛyɛ 500–2000kg wɔ plywood pallet biara mu sɛnea nneɛma a wɔde yɛ ne akwantuo ahwehwɛdeɛ teɛ.

Container Loading: Wɔka bɛyɛ tɔn 20 wɔ container biara mu sɛ adesoa dodoɔ a ɛwɔ hɔ nyinaa, nanso loading a ɛtwa toɔ no gyina roll dimensions, krataa so nsɛm format, pallets ne container weight anohyeto so.

Reference Lead Time: Bɛyɛ adwuma nnafua 10–14 sɛnea mprempren fibea ho nsɛm kyerɛ, a egyina dodow, kɔla, nsusuwii ne nhyehyɛe a wɔde yɛ nneɛma so.

Nneɛma a Ɛyɛ Pa ne Adansedi Ho Nwoma

Mprempren afiri ho nsɛm no kyerɛ SGS ne ISO 9001:2008 nkrataa. Ɛsɛ sɛ adetɔfo bisa mprempren adansedi nkrataa a ɛfa su pa ho, mfiridwuma ho nsɛm krataa so nsɛm s ne sɔhwɛ amanneɛbɔ a ɛfa nneɛma pɔtee bi ho ansa na wɔde wɔn ho ato adansedi krataa biara so.

Sɛ wopɛ dwumadie a wɔahyɛ ho mmara te sɛ aduane anaa aduruyɛ mu nneɛma a wɔde kyekyere nneɛma ho a, bisa nkrataa a ɛfa nneɛma no grade pɔtee, layer nhyehyeɛ, sɛdeɛ wɔpɛ sɛ wɔde bedi dwuma ne baabi a wobɛkɔ gua.

HSQY Amanaman Ntam Ɔyɛkyerɛ

HSQY de ne ho hyɛ amanaman ntam plastic ne nneɛma a wɔde kyekyere nneɛma ho ɔyɛkyerɛ mu de hyia nnwumakuw a wɔyɛ thermoforming, nneɛma a wɔde kyekyere nneɛma mu nsakrae, plastic krataa so nsɛm a wɔkyekyɛ ne wiase nyinaa B2B adetɔfo afoforo.

FAQ Ɛfa GAG PET plastic krataa

Dɛn ne GAG PET krataa so nsɛm ?

GAG PET krataa so nsɛm yɛ polyester a ɛwɔ ntoatoasoɔ mmiɛnsa a wɔabom ayɛ krataa so nsɛm a wɔtaa hyehyɛ no sɛ PETG /A PET/PE TG. PETG akyi ntoatoasoɔ no ma mfasoɔ a ɛwɔ soro ne nea ɛyɛ, berɛ a APET core no ma ɛyɛ den na ɛho ka yɛ yie.

So GAG ne PETG yɛ pɛ ?

Dabi PETG krataa so nsɛm no, wɔtaa yɛ fi PETG mu wɔ krataa so nsɛm kɛseɛ no nyinaa mu, berɛ a GAG de PETG abɔnten so ntoatoasoɔ a APET a ɛwɔ mu di dwuma.

Nsonsonoe bɛn na ɛwɔ GAG ne APET ntam ?

APET no, wɔtaa paw no ma sikasɛm mu nnoɔma a ɛda adi pefee a wɔde kyekyere nneɛma ne standard thermoforming. GAG de PETG surface layers ka ho na ebetumi ama forming, folding, bonding ne impact adwumayɛ a ɛkɔ anim ama applications a ɛhwehwɛ pii.

Dɛn na wɔde 1mm GAG PET krataa so nsɛm di dwuma?

Wobetumi de 1mm GAG krataa so nsɛm adi dwuma ama afã horow a wɔayɛ no hyew, nnaka a wɔbobɔw a emu da hɔ, nneɛma a wɔde bɔ nneɛma ho ban, nneɛma a wɔde kyerɛ, nnua a ɛyɛ mmerɛw ne nneɛma a wɔayɛ wɔ baabi a ɛho hia sɛ ɛyɛ den kɛse sen nneɛma a wɔde kyekyere nneɛma a ɛyɛ tratraa.

So GAG PET krataa so nsɛm fata ma thermoforming?

Aane. GAG na wɔtaa de yɛ thermoforming ne vacuum forming. Adwumayɛ ankasa gyina ne kɛse, sɛnea wɔyɛ no bun, ɔhyew nhyehyɛe, nkuku geometry ne mfiri a wɔde yɛ nneɛma so.

So GAG ye sen APET ma deep-draw thermoforming?

GAG betumi ayɛ ɔkwan pa bere a APET nya mpaapaemu, adwennwen fitaa anaasɛ forming adwumayɛ a ɛnnɔɔso wɔ afã horow a emu dɔ anaa ɛyɛ den kɛse mu. Ɛsɛ sɛ wɔde nhwɛsode sɔhwɛ di dwuma de si nneɛma a eye sen biara no so dua.

So GAG bo yɛ mmerɛw sen PETG ?

GAG , wɔtaa de si hɔ sɛ ɔkwan foforo a wɔhwɛ so sɛ wɔbɛfa so ayɛ PETG a edi mũ efisɛ mfinimfini fã no yɛ APET . Bo ankasa bo gyina layer ratio, thickness, resin bo, kɔla, dimensions ne order volume.

So wobetumi de GAG krataa so nsɛm adi dwuma ama nnaka a wɔbobɔw?

Aane. Wobetumi asusuw GAG krataa so nsɛm a ɛda adi pefee ho ama folding-box packaging a emu da hɔ, folding adwumayɛ ne bonding ho hia. Ɛsɛ sɛ wɔsɔ crease ankasa, folding radius ne adhesive nhyehyɛe no hwɛ.

So wobetumi atintim GAG PET krataa so nsɛm ?

GAG wobetumi de tintim nhyehyɛe a ɛne no hyia atintim. Ɛsɛ sɛ wɔde krataa so nsɛm ankasa ne tintim kwan no sɔ ink a ɛbata ho ne biribiara a ɛho hia a wɔde yɛ ɔfasu no hwɛ.

So GAG hia sɛ wodi kan dry ansa na wɔayɛ thermoforming?

Pre-drying ahwehwɛde gyina nneɛma no nsu, storage tebea, thickness ne thermoforming kwan. Mfa no sɛ GAG grade biara betumi ayɛ bere nyinaa a ɛnyow; si akwankyerɛ a ɛfa dwumadie ho ma grade a wɔde ama no so dua.

So wobetumi de GAG PET krataa so nsɛm adi dwuma wɔ abɔnten?

Ɛnsɛ sɛ wobu gyinapɛn GAG no ara kwa sɛ ɛyɛ abɔnten so UV-resistant a ɛtra hɔ kyɛ krataa so nsɛm . Sɛ ɛho hia sɛ wɔde di dwuma wɔ abɔnten a, kyerɛ ɔsom nkwa nna, UV a ɛda adi ne wim tebea a ɛhwehwɛ sɛnea ɛbɛyɛ a wobetumi asusuw abasobɔde a ɛfata ho.

So GAG PET krataa so nsɛm wobetumi asan de adi dwuma?

GAG de PET -based polyester layers di dwuma, nanso sɛnea wɔsan de di dwuma ankasa no gyina mpɔtam hɔ nneɛma a wɔboaboa ano, hyehyɛ ne nea wɔsan de di dwuma nhyehyɛe ne ink, nkyerɛwde, ntama ne nneɛma afoforo a ɛwɔ ade a wɔawie no mu so.

So wobetumi GAG PET krataa so nsɛm adi dwuma de ayɛ aduan a wɔde kyekyere nneɛma?

GAG wobetumi ayɛ ama nneɛma a wɔde kyekyere nneɛma, nanso ɛsɛ sɛ wosi aduan-nkitahodi fata so dua ma resin pɔtee, nneɛma a wɔde ka ho, layer adansi, aduan ko a wɔpɛ sɛ wɔyɛ, ɔhyew ne baabi a wɔrekɔ gua. Bisa mprempren nneɛma pɔtee ho nkrataa ansa na wode adi dwuma.

Nneɛma a ɛyɛ den bɛn na HSQY betumi de ama?

Mprempren HSQY nneɛma ahorow no kyerɛ GAG krataa so nsɛm ne kɛse fi 0.15mm kosi 3mm.

Dɛn ne nhoma mmobɔwee no trɛw a ɛsen biara?

Mprempren nneɛma ho nsɛm kyerɛ roll trɛw fi 110mm kosi 1280mm. Ɛsɛ sɛ wɔkyerɛ ntrɛwmu tolerance pɛpɛɛpɛ ma automatic forming lines.

Cut- krataa so nsɛm akɛseɛ bɛn na ɛwɔ hɔ?

Mprempren gyinapɛn krataa so nsɛm akɛseɛ no bi ne 915×1220mm ne 1000×2000mm, a nsusuiɛ a wɔahyɛ da ayɛ no wɔ hɔ sɛdeɛ adwuma no teɛ.

Dɛn ne MOQ ma GAG PET krataa so nsɛm ?

Mprempren ade krataafa no kyerɛ MOQ a ɛyɛ 1000kg. Kɔla soronko, ne kɛse anaa nea wɔahyɛ da ayɛ no betumi anya ahwehwɛde ahorow a ɛsono sɛnea wɔyɛ.

So metumi abisa nhwɛsode ahorow ansa na wɔayɛ no kɛse?

Aane. Wɔkamfo nhwɛsode sɔhwɛ kyerɛ sɛnea ɛbɛyɛ a wɔbɛsɔ nea ɛda adi pefee, sɛnea wɔyɛ adwuma, nkɛntɛnso suban, mpopaho, tintim ne nneɛma a wɔawie no hwɛbea ansa na wɔakra aguadi.

Nsɛm bɛn na wɔhwehwɛ na wɔafa aka asɛm?

Fa thickness, roll width anaa krataa so nsɛm kɛseɛ, kɔla, dwumadie, forming depth, machine type, roll nhyehyeɛ, afe afe dodoɔ, packing ahwehwɛdeɛ, nkrataa a wɔhwehwɛ ne destination market ma.

Ɛfa HSQY Plastic Kuw ho

HSQY Plastic Group de APET , PETG , GAG ne plastic a ɛyɛ den krataa so nsɛm nneɛma afoforo ma nnwumakuw a wɔyɛ thermoforming, wɔn a wɔdannan nneɛma a wɔde kyekyere nneɛma, nnwumakuw a wɔtintim nhoma, wɔn a wɔkyekyɛ ne wɔn a wɔyɛ mfiridwuma.

HSQY boa GAG krataa so nsɛm nnwuma a wɔayɛ no sɛnea wɔpɛ, ne trɛw, krataa so nsɛm kɛse, kɔla, roll nhyehyɛe, nhwɛsode, packing ne bulk export supply.

Fa wo mfonini a woawie, forming depth, krataa so nsɛm thickness, roll width, afe afe ahwehwɛde ne application ahwehwɛde ahorow mena na woasusuw ho sɛ ebia APET , GAG anaa PETG ne ade a ɛfata sen biara ma wo project.

       Nya GAG PET plastic krataa Nsɛm a Wɔafa Ka & Nhwɛsode