Tray siamna tur PET/PE Lidding Film lock-seal hmanga siam a ni

Lock-Seal PET/PE Lidding Film hi eng nge ni?

Lock-seal PET/PE lidding film hi laminated tray-sealing film a ni a, ei tur tray leh container inmil takah chuan a khar theih loh, a peel awlsam lo thei tura siam a ni. PET emaw BOPET pawn lam layer hian tensile strength, dimensional stability, clarity, puncture resistance, leh printable surface a pe a ni. PE-based inner layer hian PE sealing surface inmil takah heat sealing a pe a ni.

Lock seal, weld seal emaw permanent seal tia sawi bawk hian package security, tamper evidence, liquid containment, leh distribution strength te a dah pawimawh ber a ni. Easy-peel film nen a danglam a, consumer peel force hniam zawk leh control theih zawka hawn tura siam a ni.

HSQY hian nominal thickness 0.052mm atanga 0.09mm , roll width 150mm atanga 900mm , leh standard 500m rolls custom conversion awm thei te a supply thin. He page-a standard grade hi automatic-in high barrier, freezer safe, microwaveable, ovenable a ni lo. Heng function te hian structure hranpa tarlan leh completed-package testing a mamawh a ni.

Engvangin Nge Lock-Seal Lidding Film hi kan hman?

• Strong permanent closure: Consumer peeling awlsam tak atana ruahman ni lo package-te tan high-strength seal a pe.

• Tamper evidence: A hawn chuan hmuh theihin film chu a tikehsawm thei a, tray flange pawh a tichhia thei a, hei hian package a tibuai tih a tilang a ni.

• Liquid containment: Weld seal dik taka validated chuan sauce, marinade, purge, emaw liquid dang emaw awmna product a support thei.

• Distribution security: Seal chakna sang zawk hian package te chu handling, stacking, vibration, leh transport te tuar thei turin a pui thei a ni.

• Product presentation chiang tak: PET/PE structure langtlang tak hian hmuh theihna leh gloss a pe thei.

• Custom printing: PET surface hian branding, buatsaih dan tur, barcode leh traceability te a support a ni.

• Anti-fog option: Anti-fog grade tha tak chuan chilled, moisture-rich foods te tan hmuh theihna a ti tha thei a ni.

• Custom roll conversion: A zau zawng, a sei zawng, a core, a winding direction, a roll weight, leh a pawn lam diameter te chu tray sealer nen a inmil thei.

Lock Seal vs. Peel awlsam tak a ni

He page-a standard product hi lock-seal grade anga dah a ni. Peel theih sealant structure hran pek leh validate a nih loh chuan peel thianghlim emaw, hawn awlsam emaw anga sawi tur a ni lo.

BOPET/PE Laminate hnathawh dan

Lock-Seal PET/PE Lidding Film chungchang sawifiahna

A hnuaia specification te hian standard performance leh optional functional grade te a thliar hrang laiin tuna commercial value te chu a vawng reng bawk. Final guaranteed property te chu technical data sheet pawm tawh, sample approval, leh purchase order-ah te ziah luh tur a ni.

Eng Tray Nge PET/PE Lock-Seal Film Seal theih?

Standard PET/PE leh High-Barrier PET/EVOH/PE te nen an inhmachhawn dawn a ni

Standard BOPET/PE laminate chu PET a awm vang chauhvin high barrier anga promote tur a ni lo. High-barrier claim-ah chuan functional layer chiang tak leh OTR leh WVTR value tehna a ngai a ni.

Seal Integrity leh Leak laka invenna

Film chak tak chuan automatic-in leak-free package a siam lo. Seal integrity hi tray flange, film sealant, tooling flatness, temperature, pressure, dwell time, web tension, filling process, leh sealing surface-a contamination-ah a innghat a ni.

Contamination tuar theihna

Tray flange-a ei tur awmte hian seal chakna a tihtlem bakah leak path a siam thei bawk. Sauce, oil, moisture, powder, sa purge, emaw particles hmanga project-ah chuan contaminated-seal testing chu commercial line speed ruahman angin a tel tur a ni.

• Tray flanges fai leh tumruh taka tihbawlhhlawh test.

• Tray sir zawng zawng, a sir zawng zawng leh compartment zawng zawngah seal chakna teh rawh.

• Vacuum, pressure-decay, dye, emaw bubble leak-test method inrem tak hmang rawh.

• Chilled storage leh transport simulation hnuah pawh seal chu pawm theih a ni reng tih finfiah rawh.

• Leak rate pawm theih leh visual seal criteria siam hmain sawifiah rawh.

Anti-Fog leh Custom Printing tih theih a ni

Condensation-in ei tur a tihbuai theihna hmunah chilled products-ah anti-fog treatment dah theih a ni. Anti-fog side, sealing side, winding direction, storage temperature, food moisture, leh target display life te chu tarlang rawh.

Custom printing-ah hian branding, thil tel, instruction, barcode, QR code, batch-code area, leh product window langtlang tak tak te a tel thei a ni. Print dan, color standard, print repeat, eye-mark position, registration tolerance, leh print chu surface emaw reverse emaw print a nih leh nih loh confirm rawh.

Recyclability ngaihtuah tur

PET/PE laminate hian polymer chhungkaw pakhat aia tam a pai a, market tinah automatic-in recyclable anga sawi tur a ni lo. Recyclability hi a structure kimchang, layer percentage, adhesive, ink, coatings, tray material, local collection rules, leh recycling infrastructure-ah a innghat a ni.

Recyclability chu thil tul ber a nihna hmunah chuan PET/PE laminate pangngai chu PE-dominant lidding structure thiam tak nen khaikhin la, tray thlan leh local design-for-recycling guidance nena inmil leh inmil loh enfiah rawh.

Tray-Sealer leh Roll nena inmil

Tray-sealer brand leh model, film zau zawng, core chhunga diameter, pawn lam diameter sang ber, roll weight, winding direction, seal-side orientation, eye-mark sensor, tooling layout, operating speed, temperature, pressure, leh dwell time te pe rawh.

Line trial-ah hian web tracking, tension, cutting, seal continuity, weld strength, burst performance, leakage, contamination tolerance, print registration, anti-fog performance, tray distortion, leh storage hun bituk hnua performance te endik tur a ni.

Quality-Control atana thil tulte

• Thickness profile: Stiffness, roll build, tracking, sealing response, leh puncture performance te a nghawng a ni.

• Lamination bond chakna: PET leh PE layer te chu him taka inzawm tlat a nih thu a nemnghet.

• Seal chakna: Inrem dan leh tray tak tak hmanga teh tur a ni.

• Seal initiation temperature: Operating window hnuai lam limit a siam.

• Coefficient of friction: Unwinding, web transport leh high-speed machinability te a nghawng a ni.

• Optical quality: Haze, gloss, gels, scratches, black spots, leh contamination te a awm.

• Roll quality: Edge alignment, telescoping, wrinkles, joint, core condition, leh winding direction te a huam a ni.

• Barrier data: Shelf-life emaw MAP performance emaw claim a nih chuan OTR leh WVTR pek tur a ni.

A hman dan tlangpui

• PET/PE ready-meal leh prepared-food tray-ah te dah a ni

• Sa thar, vawk, leh tuifinriat thil chi hrang hrang pack-ah barrier structure dik tak hmanga siam a ni

• Cheese, dairy, deli, leh processed-food tray te a awm bawk

• Product thar leh salad pack hrang hrangah anti-fog optional a awm bawk

• Liquid awmna ei tur, permanent seal nghet tak mamawh

• Tamper-evident food-service leh contract-packing dilna te

• Custom printed retail food packaging hmanga siam a ni

• PET/EVOH/PE MAP tray-ah hian high-barrier lid inmil tak hmanga siam a ni

HSQY's te chu chhui rawh PET/PE tray range leh PET/PE tray sealing film category ah hian a kaihhnawih packaging solutions te a awm a.

Quotation dik tak siamna atana Information mamawh

1. Tray material, layer structure, supplier, product code, drawing, emaw physical sample emaw a ni thei

2. Tray dimension, flange zau zawng, compartment, leh fill weight te

3. Lock-seal chakna mamawh leh film emaw tray failure mode pawm theih

4. Chaw chi, oil, moisture, sauce, powder, leh flange-a tihbawlhhlawh theihna a awm

5. Filling temperature, dahna temperature, distribution condition, leh target shelf life te a ni

6. Standard barrier, high barrier, MAP, anti-fog, printing, emaw peel awlsam tak mamawh

7. Tray-sealing machine brand, model, tooling layout, leh commercial line speed te a ni

8. Film thickness, a zau zawng, a sei zawng, core ID, maximum outer diameter, roll weight, leh winding direction te

9. OTR, WVTR, gas mixture, residual-oxygen, leak-rate, emaw burst mamawh a nih chuan

10. Artwork, rawng awm zat, print repeat, eye-mark position, leh registration tolerance te

11. Food-contact, migration, quality, leh destination-market documentation mamawh a ni

12. Trial quantity, kum khata volume, delivery destination, leh launch date dil te

Lock-Seal Film Sample leh Pricing dil rawh

Customization Services te pawh a awm bawk

• Custom 0.052–0.09mm a thuk leh tolerance a ni

• Custom 150–900mm roll zau zawng a ni

• Custom roll sei zawng, core, roll weight, pawn lam diameter sang ber, leh winding lam hawi zawng zawng

• Lock-seal, hard-peel, leh a hrana siam chhuah awlsam tak tak structure te

• Anti-fog, high-barrier, MAP, temperature hniam, leh thermal-grade hmanga siam chhuah a ni

• Branding leh traceability atan flexographic emaw gravure emaw printing hmanga ziah a ni

• Custom eye mark, print repeat, transparent window, coding area, perforation, leh venting te a awm bawk

• Tray inmil dan enfiah te, seal-window trial te, contamination test te, leh leak test te a ni

• Custom carton, roll label, pallet mark, leh international delivery te a awm bawk

Quality leh Compliance Documentation te chu a hnuaia mi ang hian a ni

HSQY hian grade pawm tawh tan quality-management, inspection, leh material documentation awmsa a pe thei a ni. Buyers te chuan technical data sheet, certificate of analysis, food-contact declaration, migration emaw compliance report, seal-strength method, a tul hunah barrier data, leh roll inspection criteria te dil tur a ni.

ISO 9001 hi quality-management-system certification a ni a, ei leh in nena inzawmna a him tih finfiahna product-specific anga tarlan tur a ni lo. SGS emaw food-contact claim-ah chuan report dik tak, laminate structure, ei tur chi, temperature, hun chhung leh hman tum dan te a tarlang tur a ni.

HSQY International Exhibition hrang hrangah neih a ni

Production leh Packing te pawh a awm bawk

Packaging leh Delivery te pawh a awm bawk

Zawhna Zawh fo thin

Lock-seal PET/PE lidding film chu eng nge ni?

BOPET/PE laminate a ni a, tray emaw container emaw-a PE sealing surface inmil takah permanent seal nghet tak siam tura siam a ni.

Lock seal tih awmzia chu eng nge ni?

Lock seal tih hian weld-type seal, awlsam taka peel open tura ruahman a ni lo tihna a ni. A hawn chuan film chu a tikehsawm thei a, tray flange chu hmuh theihin a tichhia thei bawk.

Eng tray nge PET/PE lock-seal film seal theih?

Standard PE sealant hi a bul berah chuan PET/PE, PET/EVOH/PE, PE, emaw PE-coated tray, PE sealing surface inmil nei tan a ni.

Plain APET, CPET, emaw PP tray te chu a seal thei em?

Automatic takin a ni lo. Plain PET, CPET, leh PP surface-ah te hian sealant chemistry hrang hrang a mamawh fo thin. Order hmain tray tak tak chu test hmasa phawt ang che.

Lock-seal PET/PE film hi a peel awlsam em?

No. Lock-seal grade chuan permanent closure a dah pawimawh ber. Easy peel atan hian sealant layer hranpa siam a ngai a ni.

Standard BOPET/PE film hi high barrier a ni em?

A ni hauh lo. High-barrier structure chiang tak, PET/EVOH/PE ang chi, leh OTR leh WVTR value tehna te chu high-barrier claim atan chuan a ngai a ni.

Film hian leak zawng zawng a veng thei ang em?

Film engmah hian a mah chauhin zero leakage a guarantee thei lo. Seal integrity hi tray quality, flange contamination, tooling, temperature, pressure, dwell time, leh handling ah te a innghat bawk.

Anti-fog a awm em?

Awle. Condensation hian hmuh theihna a tihtlem theihna tur chilled foods tan anti-fog grade siam theih a ni.

Standard grade freezer, microwave emaw oven emaw hi a him em?

No. Tuna standard grade hman mek hi non-freezer, non-microwave, leh non-ovenable tiin tarlan a ni. Special grade tan chuan test hran neih a ngai a ni.

Film hi custom print theih a ni em?

Awle. Printing-ah hian logo, thil tel, thupek, barcode, QR code, date-code area, leh product window langtlang tak tak te a tel thei a ni.

PET/PE lidding film hi recycle theih a ni em?

Polymer chhungkaw hrang hrang a inzawmkhawm avangin hmun tinah recycle theih anga ngaih tur a ni lo. Recyclability hi structure kimchang leh local collection system-ah a innghat a ni.

Eng size nge awm?

Page-ah hian standard width 180mm, 320mm, 400mm, leh 640mm, custom range 150–900mm, thickness 0.052–0.09mm, leh standard roll length 500m te tarlan a ni.

Eng thilin nge weld seal chak lo chhan?

A chhan tlangpui chu tray surface inmil lo, flange contamination, temperature tling lo, pressure emaw dwell time emaw, tooling inang lo emaw, film tension tha lo emaw a ni.

Order zat tlem ber chu engzat nge ni?

Tuna MOQ tarlan chu 1000kg a ni. Sample leh trial quantities hi stock, width, printing, barrier, leh seal mamawh danah a innghat a ni.

Bulk production hmain sample ka dil thei ang em?

Ni e, material awm leh awm loh leh specification a zirin. Tray sample, machine details, ei tur hman dan, film dimension, leh seal chakna mamawh te thawn rawh.

HSQY Plastic Group chungchang

HSQY Plastic Group hian international B2B customer te tan lock-seal PET/PE lidding film, PET/PE tray, PET/EVOH/PE high-barrier tray leh film, anti-fog film, easy-peel film, plastic sheet, leh a kaihhnawih packaging product te a supply thin a ni.

He team hian tray compatibility, seal-strength development, film-structure thlan, roll conversion, printing, anti-fog leh barrier thlan, sample, production-line trial, quality documentation, export packing, leh international delivery te a support thei a ni.

Lock-Seal PET/PE Film duh tan HSQY zawhfiah theih a ni