Lock-seal PET / PE Nutsyɔnu Film na Trays

Nukae Nye Lock-Seal PET/PE Lidding Film?

Lock-seal PET/PE lidding film nye laminated tray-sealing film si wowɔ be wòawɔ nu sesẽ, si meɖea nu le bɔbɔe o le nuɖuɖugoe kple nugoe siwo sɔ dzi. PET alo BOPET gotagome ƒuƒoƒoa naa ŋusẽ si woate ŋu ahe, didime ƒe liƒo, eme kɔ, tsitretsitsi ɖe tome, kple anyigba si woate ŋu ata. PE-si wotu ɖe ememe ƒuƒoƒoa naa dzoxɔxɔ nutrenu na PE nutrenu ƒe anyigba si sɔ.

Nutrenu si wotsɔna ƒoa gae, si woyɔna hã be weld seal alo permanent seal, tsɔa nusiwo wotsɔ blaa nu ƒe dedienɔnɔ, nusiwo wotsɔ trɔa asi le nu ŋu ƒe kpeɖodzi, tsi ƒe tsɔtsɔ, kple mama ƒe ŋusẽ ɖoa nɔƒe gbãtɔ. Eto vovo na film si woɖena bɔbɔe, si wowɔ be wòaʋu kple nuƒlelawo ƒe lãɖeɖe ƒe ŋusẽ si bɔbɔ ɖe anyi wu eye wokpɔa ŋusẽ ɖe edzi wu.

HSQY naa ŋkɔ me titrime tso 0.052mm va ɖo 0.09mm , agbalẽ xatsaxatsa kekeme tso 150mm va ɖo 900mm , kple dzidzenu 500m agbalẽ xatsaxatsawo kple tɔtrɔ ɖe ɖoɖo nu li. Dzeside si woɖo ɖe axa sia dzi la menye mɔxenu gã le eɖokui si, si le nufamɔ̃ me, si woate ŋu atsɔ ade microwave me, alo si woate ŋu atsɔ aɖa nu le dzo me o. Dɔ siawo bia be woawɔ ɖoɖo si wogblɔ ɖe vovo kple dodokpɔ si wowɔ le agbalẽvi siwo wowu enu me.

Nukatae Nàzã Lock-Seal Lidding Film?

• Nutrenu sesẽ si nɔa anyi ɖaa: Enaa nutrenu si ŋu ŋusẽ le ŋutɔ na agbalẽvi siwo womeɖo be nuƒlelawo naɖe wo ɖa bɔbɔe o.

• Kpeɖodzi siwo ŋu wotrɔ asi le: Ne woʋui la, ate ŋu avuvu film la alo agblẽ nu le tray la ƒe flange ŋu, si fia be wodo kplamatse nusi wotsɔ blae.

• Tsi ƒe tsɔtsɔ: Weld seal si ŋu woda asi ɖo nyuie ate ŋu ado alɔ nusiwo me sauce, marinades, purge, alo tsi bubuwo le.

• Dedienɔnɔ le mama me: Nutrenu ƒe ŋusẽ si lolo wu ate ŋu akpe ɖe agbawo ŋu be woanɔ te ɖe wo tsɔtsɔ, wo ƒoƒo ƒu ɖekae, wo ʋuʋu, kple wo tsɔtsɔ yi teƒe bubuwo nu.

• Adzɔnuwo ƒe ɖeɖefia si me kɔ: PET/PE ƒe xɔtuɖoɖo siwo me kɔ ate ŋu ana woakpɔ nu eye wòaklẽ.

• Agbalẽtata ɖe ɖoɖo nu: PET ƒe anyigba doa alɔ adzɔnu ƒe dzeside, dzadzraɖo ŋuti mɔfiamewo, barcode, kple traceability.

• Tiatia si tsia afu nu: Atike si sɔ si tsia afu nu ate ŋu ana nuɖuɖu siwo fa miamiamia, siwo me tsi sɔ gbɔ ɖo la nadze nyuie wu.

• Agbalẽxatsaxatsa ƒe tɔtrɔ si wowɔ ɖe ɖoɖo nu: Woate ŋu atsɔ kekeme, didime, nu vevi, afisi woƒoe ɖo, agbalẽ xatsaxatsa ƒe kpekpeme, kple eƒe gota gome ƒe didime asɔ kple agbaa ƒe nutrenu.

Lock Seal vs. Blewu Peel

Woɖo atike si wozãna ɖaa le axa sia dzi abe gaƒoɖokui ƒe nutrenu ƒe dzesi ene. Mele be woaɖɔe be enye lãgbalẽ dzadzɛ alo ʋuʋu bɔbɔe o negbe ɖe wotsɔ nutrenu ƒe xɔtunu si woɖe ɖe vovo si woate ŋu aŋe la na eye woda asi ɖe edzi hafi.

Alesi BOPET/PE Laminate la wɔa dɔe

Lock-Seal PET / PE Nutsyɔnu Film ƒe Nɔnɔmewo

Nɔnɔme siwo le ete la léa asitsatsa ƒe asixɔxɔ siwo li fifia me ɖe asi esime wole dɔwɔwɔ ƒe dzidzenuwo mam tso dɔwɔwɔ ƒe dzesi siwo woate ŋu atia gbɔ. Ele be woaŋlɔ nunɔamesi mamlɛtɔ siwo ŋu kakaɖedzi le la ɖe mɔ̃ɖaŋu ŋuti nyatakaka gbalẽvi si dzi woda asi ɖo, kpɔɖeŋu ƒe mɔɖeɖe, kple nuƒle ƒe sedede me.

Tray Kawoe Ate Ŋu Ate Ŋu PET/PE Lock-Seal Film Nutrenu?

PET/PE si wozãna ɖaa tsɔ wu PET/EVOH/PE si ƒe mɔxenu gã

Mele be woado BOPET/PE laminate si wozãna ɖaa ɖe ŋgɔ abe mɔxenu kɔkɔ ene le esi PET le eme ta ko o. Mɔxenu gã ƒe nyagbɔgblɔwo bia be woawɔ dɔwɔwɔ ƒe ƒuƒoƒo si woɖe fia kple OTR kple WVTR ƒe asixɔxɔ siwo wodzidze.

Nutrenu ƒe Fɔmaɖimaɖi Kple Mɔxexe Ðe Tsitretsitsi Nu

Film sesẽ mewɔa nusi me tsi aɖeke mele o le eɖokui si o. Nutrenu ƒe blibonyenye nɔ te ɖe tray ƒe flange, film ƒe nutrenu, dɔwɔnu ƒe gbadzaƒe, dzoxɔxɔ, nyaƒoɖeamenu, ɣeyiɣi si wònɔa anyi, web ƒe tete, yɔyɔ ƒe ɖoɖo, kple ɖiƒoƒo le nutrenua ƒe anyigba dzi.

Ðiƒoƒo ƒe Mɔɖeɖe ɖe Nu Ŋu

Nuɖuɖu ƒe nugbagbevi siwo le tray ƒe flange dzi ate ŋu aɖe nutrenu ƒe ŋusẽ dzi akpɔtɔ eye wòana mɔ siwo dzi tsi sina tona la nado. Ele be dɔ siwo ku ɖe mɔli, ami, tsidzadza, aŋe, lãɖeɖe, alo lãmenugbagbevi suesuesuewo ŋu nalɔ nutrenu si me ɖi le dodokpɔ le le asitsatsa ƒe mɔ si ŋu wowɔ ɖoɖo ɖo ƒe duƒuƒu nu.

• Do tray flanges siwo le dzadzɛ eye woɖoe koŋ ƒo ɖi wo kpɔ.

• Dzidze nutrenu ƒe ŋusẽ le tray ƒe axawo katã, dzogoewo, kple xɔwo katã dzi.

• Zã vacuum, pressure-decay, dye, alo bubble leak-test mɔnu si dzi wolɔ̃ ɖo.

• Kpɔe ɖa be nutrenua gakpɔtɔ nye nusi dzi woda asi ɖo le nudzraɖoƒe fafɛ kple ʋuɖoɖo ƒe nɔnɔmetata megbe.

• Ðe tsi si le dodom ƒe agbɔsɔsɔ si dzi woda asi ɖo kple nutrenu si wokpɔna ƒe dzidzenuwo gɔme hafi nàwɔe.

Anti-Fog kple Agbalẽtata ƒe Tiatiawɔblɔɖe

Woate ŋu atsɔ atike si tsia afu nu akpe ɖe nusiwo wofa ŋu le afisi tsi ƒe ƒoƒo ate ŋu atsyɔ nuɖuɖua dzi le. Tsɔ akpa si tsi tre ɖe afu ŋu, nutrenu ƒe akpa, mɔ si dzi woaƒoe ɖo, dzoxɔxɔ si wodzra ɖo, nuɖuɖu ƒe tsidzadza, kple taɖodzinu ƒe ɖeɖefia ƒe agbenɔƒe gblɔ.

Agbalẽtata si wowɔ ɖe ɖoɖo nu ate ŋu anye dzesideŋkɔ, nusiwo wotsɔ wɔe, mɔfiamewo, barcode, QR code, batch-code teƒewo, kple adzɔnuwo ƒe fesre siwo me kɔ. Ðo kpe agbalẽtata ƒe mɔnu, amadede ƒe dzidzenu, tata gbugbɔgata, ŋku-dzesi ƒe nɔƒe, ŋkɔ ŋɔŋlɔ ƒe mɔɖeɖe ɖe nu ŋu, kple nenye be wota agbalẽa ɖe anyigba alo megbe.

Nusiwo Ŋu Woabu le Nusiwo Woate Ŋu Azã Agbugbɔ Azã Ŋu

Polymer ƒome si wu ɖeka le PET/PE laminate me eye mele be woagblɔ le eɖokui si be woate ŋu azãe ake le asi ɖesiaɖe me o. Gbugbɔgazã nɔ te ɖe xɔtuɖoɖo bliboa, ƒuƒoƒo ƒe alafa memamã, nusi léna ɖe nu ŋu, nuŋlɔtsi, nusiwo wotsɔ blaa nu, nusiwo wotsɔ ƒoa agbae, nutoa me nuƒoƒoƒu ƒe sewo, kple nusiwo wogbugbɔ zãna ƒe xɔtuɖoɖowo dzi.

Le afisiwo gbugbɔgazã nye nudidi vevitɔ le la, tsɔ PET/PE laminate si wozãna ɖaa sɔ kple nutsyɔnu si sɔ si me PE xɔ aƒe ɖo eye nàkpɔe ɖa be esɔ kple agba si nètia kple mɔfiame si le nutoa me ƒe ɖoɖowɔwɔ-na-gbugbɔgazã.

Tray-Sealer kple Roll ƒe Ðekawɔwɔ

Na tray-sealer ƒe dzesi kple kpɔɖeŋu, film ƒe kekeme, nuto si le eme ƒe didime, gotagome didime si sɔ gbɔ wu, agbalẽ xatsaxatsa ƒe kpekpeme, ʋuʋudedi ƒe mɔfiame, nutrenu-axadzi ƒe nɔnɔme, ŋku-dzesi sensor, dɔwɔnuwo ƒe ɖoɖo, dɔwɔwɔ ƒe duƒuƒu, dzoxɔxɔ, nyaƒoɖeamenu, kple ɣeyiɣi si woanɔ anyi.

Ele be fli dodokpɔwo nada web kplɔkplɔ, tete, lãɖeɖe, nutrenu ƒe yiyi, weld ƒe ŋusẽ, gbagbã ƒe dɔwɔwɔ, tsi si le dodom, ɖiƒoƒo ƒe mɔɖeɖe, agbalẽtata ƒe ŋkɔ ŋɔŋlɔ, tsitretsitsi ɖe afu ŋu ƒe dɔwɔwɔ, tray ƒe tɔtɔ, kple dɔwɔwɔ le nudzraɖoƒe ƒe ɣeyiɣi si woɖo be woatsɔ adzrae ɖo megbe.

Nudidi Siwo Ku Ðe Dzɔdzɔmeŋutete Ŋu

• Titrime ƒe nɔnɔme: Ekpɔa ŋusẽ ɖe sesẽme, agbalẽ xatsaxatsa tutu, kplɔkplɔ, nutrenu ƒe ŋuɖoɖo, kple puncture ƒe dɔwɔwɔ dzi.

• Lamination bond strength: Eɖo kpe edzi be PET kple PE ƒuƒoƒoawo gakpɔtɔ le kadodo me dedie.

• Nutrenu ƒe ŋusẽ: Ele be woazã mɔnu si dzi wolɔ̃ ɖo kple agba ŋutɔŋutɔ atsɔ adzidzee.

• Seal gɔmedzedze dzoxɔxɔ: Ðo seɖoƒe si le anyime na dɔwɔwɔ fesre.

• Coefficient of friction: Ekpɔa ŋusẽ ɖe unwinding, web transport, kple mɔ̃ si zɔna kabakaba dzi.

• Nukpɔkpɔ ƒe nyonyome: Afu, keklẽ, gel, ʋuʋudedi, teƒe yibɔ, kple ɖiƒoƒo hã le eme.

• Roll quality: Elɔ nugbɔ ƒe ɖoɖowɔwɔ, didiƒekpɔmɔ̃, flitete, ƒunukpeƒewo, nu vevi ƒe nɔnɔme, kple mɔfiame si woatsɔ aƒoe ɖe eme.

• Mɔxenu ŋuti nyatakakawo: Ele be woatsɔ OTR kple WVTR ana ne wogblɔ be eƒe agbenɔƒe alo MAP ƒe dɔwɔwɔ.

Dɔwɔwɔ Siwo Wozãna Zi geɖe

• PET/PE nuɖuɖu siwo woɖa xoxo kple nuɖuɖu siwo wodzra ɖo ƒe agbawo

• Lã yeye, koklolã, kple ƒumelãwo ƒe babla siwo zãa mɔxenu si sɔ

• Cheese, nyinotsi, deli, kple nuɖuɖu siwo ŋu wotrɔ asi le ƒe agbawo

• Nu yeyewo kple salad-babla siwo me woate ŋu atia anti-fog

• Nuɖuɖu siwo me tsi le siwo hiã be woatsɔ nutrenu sesẽ si anɔ anyi ɖaa

• Nuɖuɖu-subɔsubɔ kple nubabla-babla ƒe dɔbiagbalẽvi siwo ŋu wotrɔ asi le

• Nuɖuɖu siwo wota ɖe asitsaƒewo ƒe nuɖuɖu siwo wota ɖe ɖoɖo nu

• PET/EVOH/PE MAP-gbadzɛwo zãa nutsyɔnu gã si sɔ

Dzro HSQY ƒe nyawo me PET/PE tray ƒe didime kple PET / PE tray nutrenu film hatsotso na nusiwo do ƒome kplii babla egbɔkpɔnuwo.

Nyatakaka Siwo Hiã Be Woagblɔ Nya Siwo Woyɔ De Eteƒe

1. Tray ƒe nu, layer ƒe wɔwɔme, nudzrala, nusi wowɔ ƒe kɔpi, nutata, alo kpɔɖeŋu ŋutɔŋutɔ

2. Tray ƒe didime, flange ƒe kekeme, xɔwo, kple nusi wotsɔ yɔe ƒe kpekpeme

3. Wobia tso lock-seal ƒe ŋusẽ kple film alo tray ƒe kpododonu ƒe nɔnɔme si dzi woda asi ɖo

4. Nuɖuɖu ƒomevi, ami, tsidzadza, mɔli, atikekui, kple flange ƒe ɖiƒoƒo ƒe afɔkuwo

5. Dzoxɔxɔ si wotsɔ yɔa nu me, dzoxɔxɔ si wodzrana ɖo, nɔnɔme siwo me woamae, kple agbenɔƒe si woɖo be woatsɔ adzrae ɖo

6. Hiahiã na mɔxenu si wozãna ɖaa, mɔxenu kɔkɔ, MAP, anti-fog, agbalẽtata, alo eɖeɖe bɔbɔe

7. Tray-sealing machine ƒe dzesi, eƒe nɔnɔme, dɔwɔnuwo ƒe ɖoɖo, kple asitsatsa ƒe ka ƒe duƒuƒu

8. Film ƒe titrime, kekeme, didime, core ID, gotagome didime si sɔ gbɔ wu, agbalẽ xatsaxatsa ƒe kpekpeme, kple mɔfiame si dzi woaƒoe ɖo

9. OTR, WVTR, gas tsakatsaka, residual-oxygen, leak-rate, alo burst ƒe nudidiwo ne esɔ

10. Nutatawo, amadedewo ƒe xexlẽme, agbalẽtata gbugbɔgagblɔ, ŋku-dzesi ƒe nɔƒe, kple mɔɖeɖe ɖe ŋkɔ ŋɔŋlɔ ŋu

11. Nuɖuɖu-kadodo, ʋuʋu, eƒe nyonyome, kple afisi woayi-asi ŋuti nuŋlɔɖi siwo hiã

12. Dodokpɔ ƒe agbɔsɔsɔ, ƒe sia ƒe ƒe agbɔsɔsɔme, afisi woatsɔe ayi, kple ŋkeke si wobia be woadze egɔme

Bia Lock-Seal Film ƒe Kpɔɖeŋuwo Kple Asixɔxɔ

Trɔ Asi Le Nu Ŋu ƒe Dɔwɔƒewo

• Dekɔnu 0.052-0.09mm titrime kple mɔɖeɖe ɖe nu ŋu

• Dekɔnu 150-900mm agbalẽ xatsaxatsa kekeme

• Agbalẽxatsaxatsa ƒe didime si wowɔ ɖe ɖoɖo nu, nu vevi, agbalẽ xatsaxatsa ƒe kpekpeme, gotagome didime si sɔ gbɔ wu, kple mɔfiame si wotsɔ ƒo xlãe

• Lock-seal, hard-peel, kple xɔtunu siwo wowɔ ɖe vovo siwo woɖena bɔbɔe

• Anti-fog, high-barrier, MAP, dzoxɔxɔ si bɔbɔ, kple dzoxɔxɔ-grade ƒe ŋgɔyiyi

• Flexographic alo gravure tata hena dzeside kple traceability

• Ŋku ƒe dzesi siwo wowɔ ɖe ɖoɖo nu, agbalẽtata gbugbɔgagblɔ, fesre siwo me kɔ, teƒe siwo woŋlɔa nu ɖo, do si me do le, kple yaƒoƒo

• Tray ƒe ɖekawɔwɔ me toto, seal-window dodokpɔwo, ɖiƒoƒo dodokpɔwo, kple tsi si le dodom dodokpɔ

• Kakɛ siwo wowɔ ɖe ɖoɖo nu, agbalẽ xatsaxatsa ƒe dzesidewo, pallet dzesiwo, kple dukɔwo dome nudɔdɔwo

Dzedzeme Kple Sedziwɔwɔ Ŋuti Nuŋlɔɖiwo

HSQY ateŋu ana nyonyome-dzikpɔkpɔ, ŋkuléle ɖe nu ŋu, kple nuwo ŋuti nuŋlɔɖi siwo li na dzeside si dzi woda asi ɖo. Ele be nuƒlelawo nabia mɔ̃ɖaŋununya ŋuti nyatakaka gbalẽvi, numekuku ƒe ɖaseɖigbalẽ, nuɖuɖu ƒe kadodo ŋuti gbeƒãɖeɖe, ʋuʋu alo sedziwɔwɔ ŋuti nyatakakawo, nutrenu ƒe ŋusẽ ƒe mɔnu, mɔxenu ŋuti nyatakakawo ne esɔ, kple agbalẽ xatsaxatsa me dzodzro ƒe dzidzenuwo.

ISO 9001 nye nyonyome-dzikpɔkpɔ-ɖoɖo ƒe ɖaseɖigbalẽ eye mele be woatsɔe afia be enye adzɔnu tɔxɛ ƒe kpeɖodzi be nuɖuɖu ƒe kadodo le dedie o. Ele be SGS alo nuɖuɖu ƒe kadodo ŋuti nyatakakawo nade dzesi nyatakaka si tututu, laminate ƒe wɔwɔme, nuɖuɖu ƒomevi, dzoxɔxɔ, ɣeyiɣi didi, kple nɔnɔme siwo woɖo be woazã.

HSQY Dukɔwo Dome Nukpɔkpɔwo

Ewɔwɔ Kple Wo Babla

Nubablɛwo Kple Wo Ðoɖoɖa

Nya Siwo Wobia Enuenu

Nukae nye lock-seal PET/PE lidding film?

Enye BOPET/PE laminate si wowɔ be wòawɔ nutrenu sesẽ si nɔa anyi ɖaa ɖe PE nutrenu si sɔ ŋu le agba alo nugoe dzi.

Nukae lock seal fia?

Lock seal fia nutrenu si le abe weld ene si womeɖo be wòaɖe ʋuʋu bɔbɔe o. Ne woʋui la, ate ŋu avuvu film la alo agblẽ nu le tray la ƒe flange ŋu wòadze ƒã.

Tray kawoe woate ŋu atsɔ PET/PE axe mɔ na film la?

Wotrɔ asi le PE ƒe nutrenu si wozãna ɖaa ŋu koŋ na PET/PE, PET/EVOH/PE, PE, alo PE-si wofa agba siwo ŋu PE ƒe nutrenu ƒe anyigba si sɔ.

Ðe wòate ŋu atre APET, CPET, alo PP-gbadzɛ siwo le gbadzaa nua?

Menye le eɖokui si o. Zi geɖe la, PET, CPET, kple PP ƒe anyigba gbadzawo hiãa nutrenu ƒe atike vovovowo. Do tray ŋutɔŋutɔ la kpɔ hafi nàbia.

Ðe lock-seal PET/PE film la ɖeɖe le bɔbɔea?

Ao, lock-seal grade tsɔa nutsotso tegbee ɖoa nɔƒe gbãtɔ. Easy peel bia be woatsɔ nutrenu si wowɔ ɖe vovo.

Ðe BOPET/PE film si wozãna ɖaa nye mɔxenu gã aɖea?

Menye nenema kokoko o. Wohiã na mɔxenu gã ƒe wɔwɔme si woɖe fia, abe PET/EVOH/PE ene, kple OTR kple WVTR ƒe asixɔxɔ siwo wodzidze na mɔxenu gã ƒe nyawo.

Ðe sinima la ate ŋu axe mɔ ɖe tsi si le dodom ɖesiaɖe nua?

Film aɖeke mate ŋu aka ɖe edzi be tsi aɖeke mado le eme le eɖokui si o. Nutrenu ƒe blibonyenye hã nɔ te ɖe tray ƒe nyonyome, flange ƒe ɖiƒoƒo, dɔwɔnuwo, dzoxɔxɔ, nyaƒoɖeamenu, ɣeyiɣi si wòanɔ anyi, kple eŋudɔwɔwɔ dzi.

Ðe atike si tsia afu nu lia?

Ɛ̃. Woate ŋu ato atike si tsia afu nu vɛ na nuɖuɖu siwo fa miamiamia le afisi tsi ƒe ƒoƒo ate ŋu aɖe nukpɔkpɔ dzi akpɔtɔ le.

Ðe nufamɔ̃, microwave, alo dzodoƒe si wozãna ɖaa la le dediea?

Ao, woŋlɔ dzeside si wozãna fifia be menye nufamɔ̃ o, esi menye microwave o, eye womate ŋu atɔ dzoe o. Dzeside tɔxɛwo hiã dodokpɔ vovovowo.

Ðe woate ŋu ata sinima la ɖe ɖoɖo nua?

Ɛ̃. Agbalẽtata ate ŋu anye dzesidenuwo, nusiwo woatsɔ awɔe, mɔfiamewo, barcodewo, QR-kɔdawo, ŋkeke-kɔdawo ƒe teƒewo, kple adzɔnuwo ƒe fesre siwo me kɔ.

Ðe woate ŋu agbugbɔ PET/PE ƒe nutsyɔnu film la awɔ dɔa?

Mele be woasusui be woate ŋu agbugbɔ awɔe le afisiafi o elabena eƒoa polymer ƒome vovovowo nu ƒu. Gbugbɔgazã nɔ te ɖe xɔtuɖoɖo bliboa kple nutoa me nuƒoƒoƒu ƒe ɖoɖowo dzi.

Agbɔsɔsɔ kawoe li?

Axaa yɔ kekeme siwo woɖo ɖi si nye 180mm, 320mm, 400mm, kple 640mm, 150–900mm ƒe didime si wowɔ ɖe ɖoɖo nu, titrime 0.052–0.09mm, kple agbalẽ xatsaxatsa ƒe didime si woɖo ɖi si nye 500m.

Nukae hea weld seal si gbɔdzɔ vɛ?

Nusiwo gbɔ wòtsona zi geɖee nye tray ƒe anyigba si mesɔ o, flange ƒe ɖiƒoƒo, dzoxɔxɔ si mesɔ o, nyaƒoɖeamenu alo ɣeyiɣi si wònɔa anyi, dɔwɔnu siwo mesɔ o, alo film ƒe tete nyuie o.

Nukae nye nudɔdɔ ƒe agbɔsɔsɔ suetɔ kekeake?

MOQ si wogblɔ fifia nye 1000kg. Kpɔɖeŋu kple dodokpɔ ƒe agbɔsɔsɔme nɔ te ɖe nudzraɖoƒe, kekeme, agbalẽtata, mɔxenu, kple nutrenu ƒe nudidiwo dzi.

Ðe mate ŋu abia be woatsɔ kpɔɖeŋuwo awɔe hafi awɔe le agbɔsɔsɔ gã mea?

Ẽ, le nusiwo li kple alesi wogblɔe tẽ nu. Ðo tray ƒe kpɔɖeŋu, mɔ̃a ŋuti nyatakakawo, nuɖuɖu si woatsɔ awɔ dɔe, film ƒe didime, kple nutrenu ƒe ŋusẽ si hiã la ɖa.

Ku ɖe HSQY Plastic Group ŋu

HSQY Plastic Group naa lock-seal PET / PE lidding films, PET / PE trays, PET / EVOH / PE high-mɔxenu trays kple films, anti-fog films, bɔbɔe-ɖea films, plastic agbalẽwo, kple nusiwo do ƒome kplii babla nu na dukɔwo dome B2B asisiwo.

Agbalẽtaƒea ate ŋu ado alɔ tray ƒe ɖekawɔwɔ, nutrenu-ŋusẽ ƒe ŋgɔyiyi, film-xɔtuɖoɖo tiatia, agbalẽ xatsaxatsa ƒe tɔtrɔ, agbalẽtata, anti-fog kple mɔxenu tiatia, kpɔɖeŋuwo, ewɔwɔ-mɔ dodokpɔwo, nyonyome nuŋlɔɖiwo, duta babla, kple dukɔwo dome dɔdɔ.

Te ɖe HSQY ŋu hena Lock-Seal PET/PE Film