Plastik-gbadzɛwo ƒe kuxiwo gbɔ kpɔnu siwo wozãna tẽe le dɔwɔƒe na xexeame katã ƒe B2B nuƒlelawo
Please Choose Your Language
LAMPSHADE BACKING & NU SIWO TSƆ KEKE KAKA

PVC Lampshade Sheet na Akaɖi Dɔwɔƒewo

PVC nu sesẽ kple afã sesẽ na kplɔ̃, anyigba, pendant kple atsyɔ̃ɖoɖo akaɖiwo. Tsɔ notsi ɣi, matte, self-adhesive kple custom finishes sɔ kple wo nɔewo le sheet alo roll nɔnɔme me.

Bia Kpɔɖeŋuwo & Asixɔxɔ Kpɔ Adzɔnuwo ƒe Tiatiawɔblɔɖewo Me

Ma vɔvɔli ƒe didimewo, nusi wotsɔ tsyɔ nu edzi, sesẽme si hiã, akaɖi ƒe ŋusẽkpɔɖeamedzi, akaɖi ƒe ƒomevi, nuzazã ƒe nɔnɔme kple nudɔdɔ ƒe agbɔsɔsɔ hena aɖaŋuɖoɖo si sɔ wu.

Wowu atsyɔ̃ɖoɖo ƒe akaɖi siwo wotsɔ PVC megbenu sesẽwo wɔ
Dɔwɔɖoɖo si le megbe na aɖaŋu PVC megbedede doa alɔ nɔnɔme, kaka kple atsyɔ̃ɖoɖo ƒe nutsyɔnu.
0.3–0.5 mm Ameɖokui-léna ɖe megbe ƒe didime si bɔ
Sheet alo Roll Supply ƒe nɔnɔme si sɔ kple ewɔwɔ
Bare alo Adhesive Na zazã tẽ alo atsyɔ̃ɖoɖo lamination
Dzedzeme si wowɔ ɖe ɖoɖo nu White, translucent, matte kple bubuwo
NYAŊUÐOÐO KABA

Nukae nye PVC akaɖiti ƒe agbalẽ?

PVC akaɖiti ƒe agbalẽ nye polyvinyl chloride si sesẽ alo esi mesẽ o si wozãna abe akaɖi ƒe xɔtuɖoɖo kple kekeli dzi kpɔkpɔ ƒe ƒuƒoƒo ene. Woate ŋu atsɔe ana abe nu ɣi ƒuƒlu alo nusi me kɔ ene, alo kple nusi wotsɔna léa nu ɖe ​​nu ŋu si te ŋu sea nyaƒoɖeamenu kple nusi ɖea asi le eŋu hena avɔ, gli alo atsyɔ̃ɖoɖo ƒe pepa ƒe laminating.

Doa alɔ vɔvɔli ƒe nɔnɔme si wowu enu Tɔtrɔ siwo wotsɔa kekeli yina kple esiwo woɖena fiana Ate ŋu atsɔ atsyɔ̃ɖonu gotagome nutsyɔnu

Nusi do tso eme si wowu enu la nɔ te ɖe kpekpe bliboa dzi: PVC ƒe hatsotso, eƒe titrime, amadede, nutsyɔnu, nusi léna ɖe nu ŋu, xɔtunu, bulb, bulb ƒe didime kple dɔwɔwɔ ƒe nɔnɔmewo.

PVC LAMPSHADE AGBALẼ ƑE ƑOMEDODO

Ŋkɔ kpuiwo to megbedede, nuwuwu kple nana ƒe nɔnɔme nu

Dze egɔme kple nusi woŋlɔ ɖi si te ɖe ŋuwò wu, emegbe nàɖo kpe eƒe titrime mamlɛtɔ, kekeme, eƒe keklẽ, eƒe goglome, eƒe nulénu ƒe wɔwɔme kple eƒe babla dzi to kpɔɖeŋu kple eƒe nɔnɔme si woŋlɔ ɖi dzi.

300 micron notsi ɣi PVC akaɖiti si wotsɔ na le agbalẽ xatsaxatsa me
300 MICRON · NOTSI ƑE ƑOMEDODO

Notsi-Yevu PVC Akaɖi ƒe Agbalẽvi

Gɔmedzedze ɣi si kaka kekeli na vɔvɔli siwo woƒo kple atsyɔ̃ɖoɖo ƒe akaɖi ƒe akpawo.

Kpɔ nusi wowɔ →
PVC gbadzɛ ɣi sesẽ si léna ɖe eɖokui ŋu si le du dzi to akaɖi ƒe nuzazãwo wɔwɔ ƒe mɔnu aɖe me
SELF-ADHESIVE · AKPAÐEKA ƑE NU KPƆKPƆ KPƆKPƆ

Ðokuisi-Adhesive Akaɖi PVC

Nyaƒoɖeamenu-sesẽ megbe na avɔ, gli alo atsyɔ̃ɖoɖo pepa laminating ɖe ɖoɖo nu tsɔla.

Kpɔ nusi wowɔ →
White sesẽ PVC adhesive film le agbalẽ xatsaxatsa nɔnɔme na akaɖiti megbe
WHITE · ADHESIVE FILM ƑE NUÐEÐEŊUTI

Rigid PVC Akaɖiti Adhesive Film

A ɣi adhesive-backed roll tiatia na lamination enuenu kple panel-trɔtrɔ dɔwɔwɔ ƒe ɖoɖowo.

Kpɔ nusi wowɔ →
White sesẽ PVC agbalẽ xatsaxatsawo na akaɖiti wɔwɔ
YEYE · AGBALẼ SI KPƆKPƆ

White PVC Sheet na Akaɖi ƒe Vɔvɔliwo

Tiatia si me mekɔna o ƒe megbedede ɣi na akaɖiti siwo hiã xɔtuɖoɖo kple ememe dzedzeme dzadzɛ.

Kpɔ nusi wowɔ →
PVC gbadzɛ si te ŋu trɔna bɔbɔe matte ɣie na akaɖiti wɔwɔ
MATTE · YEYE ƑE NUÐEÐEŊUTI

Matte PVC Akaɖi ƒe Agbalẽvi

Anyigba si me keklẽ mele o na atsyɔ̃ɖoɖo ƒe vɔvɔliwo, ƒuƒoƒo siwo wota kple akaɖi siwo wotsɔ avɔ tsyɔ.

Kpɔ nusi wowɔ →
White PVC akaɖiti si wotsɔ na abe agbalẽ siwo wotso ene
ROLL SUPPLY · KPEKPEÐEŊU ƑE KPEKPEÐEŊU

PVC Akaɖiti Nuwo ƒe Agbalẽxatsaxatsa

A continuous-format gɔmedzedze na converters lãɖeɖe enuenu vɔvɔli panels kple standard kekeme.

Kpɔ nusi wowɔ →
PVC akaɖiti ɣi siwo woƒo ƒu ɖe wo nɔewo dzi
KPƆKPƆ ƑE AGBALẼ · YEYE

White PVC Akaɖi ƒe Agbalẽvi

A sheet-fed tiatia na sampling, custom panel lãɖeɖe kple lower-volume atsyɔ̃ɖoɖo vɔvɔli wɔwɔ.

Kpɔ nusi wowɔ →
Glossy ɣi adhesive PVC agbalẽ xatsaxatsa na akaɖiti megbe
ADHESIVE · AGBALẼ ALOO AKPAÐEKA

PVC Akaɖi ƒe Kpekpeɖeŋugbalẽvi

Tiatia si ŋu wotsɔa nu léna ɖo hena atsyɔ̃ɖoɖo ƒe nutsyɔnu sisi kple vɔvɔli siwo ƒe megbe sesẽ la ƒoƒo ƒu.

Kpɔ nusi wowɔ →
Èhiã amadede, kekeme alo xɔtunu si wotsɔ léa nu ɖe ​​nu ŋu si wowɔ ɖe ɖoɖo nua? Ðo wò nudidiwo ɖa →
NUWO TIATIA ƑE MƆFIAME

Tsɔ PVC xɔtutua sɔ kple vɔvɔli si wowu enu

Gota gome si woate ŋu akpɔ ate ŋu anye avɔ alo pepa, gake megbea gakpɔtɔ kpɔa ŋusẽ ɖe eƒe sesẽ, ememe dzedzeme, eƒe goglome kple kekeli ƒe ŋusẽkpɔɖeamedzi ƒe akpa aɖe dzi.

Nusiwo wotsɔ wɔe ƒe tiatia gbãtɔ Dɔa ƒe nɔnɔme si bɔ Ðo Nɔnɔme kpe edzi hafi nàbia
Notsi ɣi Diffusing dzedzeme Enaa nukpɔkpɔ tẽ to megbenyawo dzi fa eye wònaa ememe nɔa ɣie. Kplɔ̃, anyigba, pendant kple atsyɔ̃ɖoɖo ƒe vɔvɔliwo. Opacity, kekeli amadede, titrime kple bulb didime.
Matte PVC Low-klẽ ƒe anyigba Eɖea anyigba ƒe keklẽ dzi kpɔtɔna eye wònaa atsyɔ̃ɖoɖo si le dzadzɛ. Egbegbe vɔvɔliwo, akpa siwo wota kple nusiwo wotsɔ laminated. Ta alo adhesive contact axa kple anyigba ƒe nɔnɔme.
Ðokuisi-klã PVC Backing kpe ɖe asiɖeɖe le liner Doa alɔ avɔ, gli alo atsyɔ̃ɖogbalẽ si sɔ ƒe lamination tẽ. Akaɖi siwo ƒe megbe sesẽ kple panel ƒe kpekpe gbugbɔgawɔ. Kpekpeɖeŋu ƒomevi, gbãtɔ tack, ɣeyiɣi didi ƒe babla kple liner ƒe nɔnɔme.
Bare white PVC Xɔtuɖoɖo ƒe agbatsɔla Enaa wòsẽna ne wometsɔ nusi wotsɔna léa nu ɖe ​​nu ŋu si te ŋu sea nyaƒoɖeamenu le dɔwɔƒea ɖo o. Dɔ siwo zãa aŋenu si woɖe ɖe vovo, agbalẽtata alo ememe ɣi si woɖe ɖe go. Bonding mɔnu, anyigbadzidɔwɔwɔ kple sesẽ si hiã.
Translucent alo clear Kekeli ƒe mɔ si kɔ wu Enaa atsyɔ̃ɖoɖo ƒe akpa si le gota la kpɔa ŋusẽ ɖe akaɖi si wokpɔna ƒe ŋusẽkpɔɖeamedzi dzi. Wota, woɖo ƒuƒoƒo kple atsyɔ̃ɖoɖo ƒe vɔvɔli siwo wɔa dɔ tɔxɛ. Kekeli ƒe kaka, hotspot dzedze kple nutsyɔtsyɔ show-to.

Esiawo nye tiatiawɔblɔɖe ƒe gɔmeɖosewo tsɔ wu be woanye xexeame katã ƒe dɔwɔwɔ ŋuti nya siwo wogblɔna. Da asi ɖe PVC, nusi wotsɔna léa nu kple nutsyɔnu ƒe ƒuƒoƒo si sɔ pɛpɛpɛ kple nusi wotsɔ blaa nu ŋutɔŋutɔ dzi.

AME ÐOKUI ƑE AKPAÐEKA

Nukae le akaɖiti si wotsɔ avɔ tsyɔ la me?

Vɔvɔli ƒe akpa si léna ɖe eɖokui ŋu nye nusi wotsɔ ƒo ƒu ɖe ƒuƒoƒo me. Layer ɖesiaɖe trɔa dzedzeme, asiléle alo kadodo ƒe dɔwɔwɔ.

01 Atsyɔ̃ɖoɖo ƒe nutsyɔnu Avɔ, gli alo pepa si wota si vɔvɔliwɔla tia
02 Nulénu si sea nyaƒoɖeamenu Blɔa atsyɔ̃ɖonu ƒe ƒuƒoƒoa ne wotsɔ nyaƒoɖeamenu si sɔ de eme
03 PVC carrier Enaa sesẽme, nɔnɔme léle ɖe te kple kekeli ƒe mɔzɔzɔ si dzi wokpɔna
04 Ememe ƒe anyigba Ŋusẽkpɔɖeamedziwo kekeli si woɖe fia kple ememe nuwuwu si wokpɔna
05 Release liner Takpɔa adhesive la ta hafi woatsoe ahaɖee
THICKNESS SCREENING ƑE NUÐEÐEŊUTI

Tsɔ 0.3, 0.4 kple 0.5 mm sɔ kple wo nɔewo le nɔnɔme kple sesẽme nu

Gauge nye nyawo tsɔtsɔ de eme ɖeka ko. Vɔvɔli ƒe didime, kɔkɔme, nutsyɔnu ƒe kpekpeme, xɔtunu ƒe dometsotso, wɔwɔme ƒe didime kple eŋudɔwɔwɔ katã kpɔa ŋusẽ ɖe tiatia mamlɛtɔ dzi.

0.3 mm

Gɔmedzedze si te ŋu trɔna bɔbɔe wu

Zi geɖe la, wodaa akɔ na gaƒoƒo sue kple titina, kplɔ̃ alo pendant vɔvɔli siwo hiã be woaƒo wo bɔbɔe.

0.4 mm

Alesi woawɔ nu ɖe ​​eŋu le mɔ si da sɔ nu

Nusi woate ŋu atsɔ asɔ kple wo nɔewo ne sesẽme si sɔ kple panel wɔwɔ enuenu siaa le vevie.

0.5 mm

Xɔtuɖaŋu ƒe kpekpeɖeŋu si sesẽ wu

Edze be woadoe kpɔ na xɔtunu siwo kɔkɔ wu, siwo keke wu alo esiwo bia nu geɖe wu le afisiwo wodi be yewoawɔ nu sesẽ bubuwo le.

Dekᴐnu

Design-led specification

Zã vɔvɔli ƒe geometry si wowɔ vɔ kple ewɔwɔ ƒe mɔnu nàtsɔ aɖe titrime gɔme tsɔ wu be nàwɔ dɔ bubu ƒe kɔpi.

Kplɔ̃dzikaɖi si ƒe vɔvɔli si wotsɔ avɔ tsyɔ si ŋu PVC-kpe ɖo
KEKLE & DEDIENƆNƆ ƑE ƉOÐO

Nusi do tso eme si me kekeli le la nye akaɖi ƒe ƒuƒoƒo bliboa tɔ

Mègada asi ɖe akaɖi ƒe PVC dzi le xɔme ƒe keklẽ te ko o. Da kpɔɖeŋua kpɔ le vɔvɔli ƒe xɔtutu ŋutɔŋutɔ kple nusi woɖo be woatsɔ aɖoe me.

Kekeli dzɔtsoƒe Bulb ƒomevi, wattage kple dzoxɔxɔ ƒe dodo
Fixture geometry Bulb ƒe didime, ya ƒe sisi kple frame dome didime
Optical target Opacity, amadede, kaka kple hotspot dziɖuɖu
Nuwo ƒe ƒuƒoƒo PVC, adhesive, avɔ, pepa, ink kple trim

Vevietɔ: Nusiwo wotsɔ wɔe ƒe nuŋlɔɖi ɖeɖe meɖo kpe edzi be wowɔ ɖe akaɖi, dzoxɔxɔ alo dzo ƒe dzidzenu si wowɔ vɔ dzi o. Ðo kpe dodokpɔ kple nuŋlɔɖi siwo hiã dzi na xɔtutu kple asi si tututu woɖo tae.

DƆWƆWƆWO

Wotue na atsyɔ̃ɖoɖo ƒe vɔvɔli wɔwɔ

PVC megbedede ateŋu ado alɔ nɔnɔme geɖewo kple gotagome dɔdamɔnu ne eƒe sesẽ, kekeli ƒe dzedzeme kple lamination nuwɔna sɔ kple aɖaŋu.

Kplɔ̃ kple anyigba akaɖi ƒe vɔvɔliwo Drum, fiaɖuƒe, tapered kple custom profiles
Pendant kple ceiling shades Aƒemenɔƒewo, amedzrodzeƒewo kple asitsaƒewo ƒe akaɖiwo
Avɔ-tsyɔ vɔvɔliwo Backing na avɔ, gli kple atsyɔ̃ɖoɖo pepa
Akaɖi si wota kple esi woŋlɔ ŋkɔ na Atsyɔ̃ɖoɖo ƒe nɔnɔmewo, nɔnɔmetatawo kple dɔa koŋ ƒe nuwuwu
Drum kple pendant akaɖi siwo ŋu wotsɔ atsyɔ̃ɖonuwo tsyɔ la nuƒoƒoƒu
White translucent PVC megbe agbalẽ si le zɔzɔm to ewɔwɔ dɔwɔnuwo me
White lampshade PVC roll si wole slit le ewɔwɔ dɔwɔnuwo dzi
NUWO ƑE NUWO ƑE TSƆTSRƆ̃

Ðe PVC akaɖiti ƒe megbedede sɔ kple styrene?

Ao, wo ame evea siaa ate ŋu anye akaɖi ƒe megbekpa sesẽ, gake PVC kple polystyrene nye polymer vovovowo. Woate ŋu ato vovo le woƒe sesẽme, woƒe bɔbɔ ƒe nɔnɔme, woƒe anyigba, woƒe aŋenu ƒe ɖekawɔwɔ, kekeli ƒe dzedzeme kple asi ƒe nudidiwo me.

Ne èle nuwo trɔm la, tsɔ vɔvɔli si wowɔ vɔ la sɔ kple wo nɔewo tsɔ wu be nàtsɔ eƒe titrime ko aɖɔli agbalẽ ɖeka.

  • 01
    De dzesi nya siwo li fifia la sɔ kple wo nɔewo

    Ma kpɔɖeŋu alo nɔnɔme aɖe na sesẽ, amadede, anyigba kple kekeli ƒe dzedzeme.

  • 02
    Do atsyɔ̃ɖoɖo ƒe nutsyɔnu la kpɔ

    Avɔ ƒe nuwuwu, gliɖoɖo kple pepa siwo wota ate ŋu atrɔ aŋɔ ƒe dɔwɔwɔ.

  • 03
    Gbugbɔ lé ŋku ɖe fixture ƒe nɔnɔmewo ŋu

    Kpɔ bulb, dzoxɔxɔ, dometsotso, frame kple destination-market ƒe nudidiwo dzi le eɖɔliɖɔli megbe.

TSO KPEKPEÐEŊU VASEÐE NUWO WƆWƆ

Afɔɖeɖe ene ƒe akaɖi ƒe nuzazã ƒe mɔ si dzi woda asi ɖo

Tu specification la ƒo xlã vɔvɔli ŋutɔŋutɔ kple ewɔwɔ ƒe mɔnu.

01

Ðe vɔvɔli la gɔme

Ma didime, nɔnɔme, xɔtunu, nutsyɔnu kple ememe dzedzeme si wobia.

02

Tia ame siwo di be yewoaxɔ ɖoƒea

Tsɔ eƒe titrime, amadede, anyigba, nusi léna ɖe nu ŋu, agbalẽ alo agbalẽ xatsaxatsa ƒe nɔnɔme sɔ kple wo nɔewo.

03

Tu eye nàna kekeli naklẽ

Lã, ƒo laminate eye nàƒo kpɔɖeŋuwo nu ƒu, emegbe nàdo wo kpɔ kple nusi nèdi be yeatsɔ aɖo wo ŋu.

04

Tsɔ nyatakaka si woɖo ɖi la ƒu gbe ɖe tsikpe me

Ŋlɔ mɔɖeɖe siwo dzi woda asi ɖo, adhesive, liner, dzedzeme kple nubablɛwo ɖi.

NUSI TAE NYA TSƆTSƆ TSO HSQY

Kpekpeɖeŋunana tɔxɛwo na akaɖi ƒe ʋuƒo trɔlawo

Gɔmedzedze si ŋu viɖe le enye wò fixture kple fabrication ƒe mɔnu—menye PVC ɣi ƒe biabiawo ɖeɖeko o.

01

Xɔtutu geɖewo

Tsɔ PVC ƒe tiatia siwo le ƒuƒlu, matte, notsi ɣi kple esiwo léna ɖe wo ɖokui ŋu sɔ kple wo nɔewo.

02

Agbawo kple agbalẽ xatsaxatsawo

Dzro nusiwo woatsɔ ana ƒe kekeme kple eƒe nɔnɔme me le wò lãɖeɖe ƒe ɖoɖo kple ewɔwɔ ƒe agbɔsɔsɔme nu.

03

Dzedzeme si wowɔ ɖe ɖoɖo nu

Dzro amadede, nusiwo me mekɔ o, anyigba kple ememe nukpɔkpɔ ƒe taɖodzinuwo me na dɔa.

04

Dadaɖeanyi si wotsɔ kpɔɖeŋu kplɔ

Do megbenya si nètia la kpɔ kple nutsyɔnu ŋutɔŋutɔ, xɔmenuwo kple kekelitsoƒe.

NUƒlela ƒe Nyabiasewo

PVC akaɖi ƒe agbalẽvi ƒe nyabiasewo

Ŋuɖoɖo kpuiwo na akaɖiwɔlawo, akaɖidɔwɔƒewo, aɖaŋuwɔlawo kple nuƒlelawo ƒe ƒuƒoƒowo.

Nukae wozãna na PVC akaɖiti? +

Wozãnɛ abe xɔtuɖaŋu alo kekeli dzi ɖuɖu ƒe megbenya ene le kplɔ̃, anyigba, akaɖiti siwo wotsɔ ƒo xlãe kple atsyɔ̃ɖoɖo ƒe akaɖiwo me. Woate ŋu azãe ƒuƒlu alo woatsɔ avɔ, gli alo atsyɔ̃ɖogbalẽ ablae.

Nukae nye akaɖi ƒe PVC si léna ɖe eɖokui ŋu? +

Enye PVC si sesẽ alo esi sesẽ afã kple afã si wotsɔ aŋe si te ŋu nɔa te ɖe nyaƒoɖeamenu nu la tsyɔ edzi eye wotsɔa nusi ɖea asi le eŋu kpɔa eta. Wotsɔa atsyɔ̃ɖoɖo ƒe nutsyɔnu si sɔ ɖe akpa si wotsɔa nu lénae la ƒoa xlãe be wòawɔ vɔvɔli ƒe akpa si ƒe megbe sesẽ.

Titrime kae wozãna zi geɖe? +

HSQY ƒe tiatia siwo bɔ be woatsɔ alé wo ɖokui ɖe wo ɖokui ŋu la anɔ abe milimeta 0.3 va ɖo 0.5 ene. Titrime nyuitɔ nɔ te ɖe vɔvɔli ƒe didime, kɔkɔme, nutsyɔnu ƒe kpekpeme, xɔtunu ƒe kpeɖeŋutɔ, eƒe goglome kple sesẽ si hiã dzi.

Ðe woate ŋu atsɔ akaɖi ƒe PVC ana le agbalẽ xatsaxatsawo mea? +

Ɛ̃. Woate ŋu aƒo nu tso agbalẽ gbadzawo, agbalẽ xatsaxatsa siwo yia edzi, agbalẽ xatsaxatsa siwo woɖe ɖe vovo kple akpa siwo wotso ɖe ɖoɖo nu ŋu le dzeside si wotia, kekeme kple nudɔdɔ ƒe nɔnɔme nu.

Ðe woate ŋu atsɔ avɔ alo gliɖoɖo abla ɖe agbalẽa ŋua? +

Wotrɔ asi le wo ɖokui ŋu be woatsɔ atsyɔ lamination dzi, gake ele be woado avɔ, gli kple atsyɔ̃ɖogbalẽ ɖesiaɖe kpɔ elabena nusiwo wotsɔ blae, eƒe nɔnɔme, tsidzadza kple eƒe gowo ƒe nuwuwu ate ŋu atrɔ kadodo ƒe dɔwɔwɔ.

Ðe PVC sɔ na bulb kple fixture ɖesiaɖea? +

Mele be woatsɔ xexeame katã ƒe susu aɖeke o. Do nusi tututu wotsɔ wɔe kple vɔvɔli si wowu enu la kpɔ kple akaɖi ƒomevi si woɖo, wattage, dometsotso, ya ƒe sisi, dɔwɔwɔ ƒe dzoxɔxɔ kple akaɖi ƒe nudidi siwo sɔ.

Nukae wòle be maɖo ɖa be woaxɔ ga home si woaxe? +

Na vɔvɔli ƒe didime kple nɔnɔme, PVC ƒe titrime, amadede alo opacity, nuwuwu, adhesive ƒe nudidi, agbalẽ alo agbalẽ xatsaxatsa ƒe didime, nutsyɔnuwo, bulb ƒomevi, agbɔsɔsɔ, dukɔ si me woayi kple dodokpɔ nuŋlɔɖi siwo hiã.

ÈDZƆ BE YEATU NUWO ƑE KPEKPE SI NYENYE YE?

Ðo vɔvɔli xɔtutua ɖa, menye 'Yevu PVC' ɖeɖeko o.

HSQY ate ŋu azã wò vɔvɔli geometry, nutsyɔtsyɔ nu, optical taɖodzinu, adhesive hiahiãwo kple ewɔwɔ ƒe nɔnɔme atsɔ adzra kpɔɖeŋu kple nyayɔyɔ si sɔ wu ɖo.

Tsɔe de wò nyabiasea me
  • Vɔvɔli ƒe didime, kɔkɔme kple nɔnɔme
  • Titrime, amadede, anyigba kple opacity
  • Avɔ, gli alo atsyɔ̃ɖoɖo ƒe nutsyɔnu
  • Sheet alo roll ƒe didime kple agbɔsɔsɔme
  • Bulb, asi kple nuŋlɔɖi ƒe nudidiwo
Bia Lampshade PVC ƒe Asixɔxɔ
DZE RFQ SI ME NYATAKAKAWO LE GƆME

Mina Míadi Plastik Egbɔkpɔnu Nyuitɔ

Èle plastik-gbadzɛwo, filmwo, nuɖuɖu siwo wobla ɖe agba me, alo egbɔkpɔnu si wowɔ ɖe ɖoɖo nu dim? Gblɔ wò nusiwo nèzã, lolome, agbɔsɔsɔme, kple dɔbiagbalẽvi ƒe nudidiwo na mí. Míaƒe ƒuƒoƒoa akpe ɖe ŋuwò nàtia atike nyuitɔ eye nàna hoʋiʋli ƒe ga home aɖe.
√   Dɔwɔwɔ kple tɔtrɔ ƒe ɖoɖo
√ Titrime, kekeme kple agbalẽ xatsaxatsa ƒe nɔnɔme
√ Amadede, eme kɔ nyuie kple eƒe anyigba ƒe nuwuwu
√ Dɔwɔwɔ, nuŋlɔɖiwo, agbɔsɔsɔ kple teƒe si woayi
Bia Míaƒe Nyayɔyɔ Nyuitɔ Kekeake
Bia Míaƒe Nyayɔyɔ Nyuitɔ Kekeake

Míaƒe nuzazã ŋuti nunyalawo akpe asi ɖe ŋuwò nàde dzesi egbɔkpɔnu nyuitɔ na wò dɔbiagbalẽvia, aƒo nya si woagblɔ kple ɣeyiɣiɖoɖo si me kɔ nyuie nu ƒu.

HSQY-PLASTIC-GROUP-logo-yevu-si me kɔ
E-mail: chenxiangxm@hgqyplastic.com

Plastik-gbadzɛ

Trays

Nutsyɔnu ƒe Filmwo

De megbe

© COPYRIGHT   2026 HSQY PLASTIC GROUP GOMENƆAMESIWO KAtã LE EDZI.