PVC Agbalẽvi na Akaɖiwo Mɔfiame: Adhesive, Matte, Dzoxɔxɔnutsitike & Tiatia Siwo Woate Ŋu Ata

Nukae Nye PVC Agbalẽvi na Akaɖiwo ?

PVC akaɖiti agbalẽ dzi nyawo nye polyvinyl chloride agbalẽ dzi nyawo si le tsɛ si sesẽ alo esi sesẽ afã kple afã si wozãna tsɔ wɔa akaɖiwo, akaɖi ƒe nutsyɔnu, atsyɔ̃ɖoɖo ƒe kekeli ƒe nutsyɔnu kple akaɖi ƒe kaka ƒe akpawo. Enaa vɔvɔli ƒe wɔwɔme, kpena ɖe bulb ƒe keklẽ tẽ ŋu wòfa eye wònaa anyigba si le gbadzaa na avɔ ƒe lamination, agbalẽtata alo atsyɔ̃ɖoɖo ƒe nuwuwu.

Le akaɖiwɔlawo gome la, akaɖiti si sɔ PVC menye plastic agbalẽ dzi nyawo dzro aɖe ko o. Ele be wòada asɔ le kekeli ƒe kaka, asitɔtrɔ le nɔnɔmewo ŋu, eƒe anyigba ƒe dzedzeme, dzoxɔxɔ ƒe tsitretsitsi, dzotsitsi ƒe dɔwɔwɔ kple dɔwɔwɔ nyuie me.

Wotsɔa PVC akaɖiwu agbalẽ dzi nyawo s naa zi geɖe le agbalẽ xatsaxatsa alo agbalẽ dzi nyawo nɔnɔme me, kple tiatia abe megbedede si léna ɖe eɖokui ŋu, anyigba matte, tsikpe ƒe nuwuwu, amadede ɣi si me kɔ, anyigba si woate ŋu ata kple atike si me dzo mele o.

Nusita Wozãa PVC na Akaɖiwo

Wozãa PVC geɖe le akaɖiwo wɔwɔ me elabena eƒe kpekpeme le bɔbɔe, mexɔa ga geɖe o eye eŋudɔwɔwɔ le bɔbɔe. Le titrime siwo sɔ me la, woate ŋu aƒoe, abɔbɔe, atsoe, aƒoe ɖe enu eye woawɔe wòazu kpẽ ƒe vɔvɔli, cone ƒe vɔvɔli, akaɖi ƒe nutsyɔnu siwo le tsia dzi kple akaɖi ƒe akpa siwo woɖo atsyɔ̃ na.

Viɖe vevi siwo dona tso eme dometɔ aɖewoe nye:

• Kekeli falɛfalɛ ƒe kaka na xɔme akaɖi si me dziɖeɖi le

• Trɔtrɔ ɖe nɔnɔmewo ŋu nyuie na vɔvɔli ƒe xɔtuɖoɖo siwo woƒo

• Anyigba si le gbadzaa na agbalẽtata, laminating kple embossing

• Amadede siwo wowɔ ɖe ɖoɖo nu, siwo dometɔ aɖewoe nye ɣi, notsi ɣi, amadede siwo me kɔ kple esiwo me mekɔ o

• Atike siwo woate ŋu awɔ siwo me dzo mele o kple esiwo tsia ɣie nu

• Stable roll supply na ewɔwɔ le agbɔsɔsɔ gã me

Ne wotsɔe sɔ kple glass alo acrylic la, PVC wɔwɔ le bɔbɔe wu eye mexɔa ga geɖe wu na atsyɔ̃ɖoɖo ƒe akaɖidɔ gãwo.

PVC Agbalẽvi na Akaɖiwo ƒe Ƒomevi Veviwo.

Ðokuisinulénu PVC Agbalẽvi na Akaɖiwo

Akaɖiti PVC si léna ɖe eɖokui ŋu agbalẽ dzi nyawo ƒe aŋenu si sea nyaƒoɖeamenu ƒe ƒuƒoƒo si wotsɔa pepa alo megbe film tsyɔ la le esi. Ne woɖe avɔa ɖa vɔ la, woate ŋu atsɔ avɔ, pepa, gli alo atsyɔ̃ɖoɖo ƒe film asisi ɖe PVC ƒe anyigba dzi tẽ.

Tiatia sia sɔ nyuie na:

• Avɔ ƒe akaɖi ƒe wɔwɔme

• DIY akaɖi ƒe xɔtunuwo

• Boutique vɔvɔli dɔwɔƒewo

• Akaɖi ƒe vɔvɔli siwo wotsɔ gliwo tsyɔ

• Sue kple titina batch customization

Viɖe vevitɔe nye be wowɔa nu kabakaba wu. Mehiã be adzɔnuwo wɔlawo nawu aŋe ɖe vovo, alala be wòahaya alo akpɔ aŋe si mesɔ o zazã gbɔ o. Gake ele be woalé ŋku ɖe nusiwo wotsɔna léa nu ɖe ​​nu ŋu ƒe nyonyome ŋu nyuie. Le akaɖi zazã gome la, ele be nuƒlelawo naɖo kpe lãgbalẽ ƒe ŋusẽ, tsitsi ƒe tsitretsitsi, ʋeʋẽ ƒe sesẽme kple dzoxɔxɔ ƒe dɔwɔwɔ dzi.

De dzesii vevi aɖe: ne ehiã be woawɔ dɔ si me dzo mele o la, do nusiwo wotsɔ wɔe ƒe wɔwɔme bliboa kpɔ, si me PVC film, adhesive kple laminated fabric hã le. Dzobibi ƒe ƒuƒoƒo PVC ɖeɖe mefia le eɖokui si be akaɖiti ƒe ƒuƒoƒo si wowɔ vɔ la ɖo dzo ƒe dzidzenu si wobia gbɔ o.

Matte PVC Agbalẽvi na Akaɖiwo

Matte PVC akaɖiti agbalẽ dzi nyawo ƒe akpa si me mekɔna tututu o si ɖea keklẽ dzi kpɔtɔna eye wònaa nukpɔkpɔ ƒe nɔnɔme fa wu. Enye nusiwo ame geɖe lɔ̃a zazã wu na egbegbe akaɖitiwo dometɔ ɖeka elabena edzena dzadzɛ, ekakaa kekeli sɔsɔe eye wòƒoa asa na kekeli ƒe keklẽ sesẽ.

Tia matte PVC ne dɔa hiã:

• Akaɖi falɛfalɛ si me klẽna o

• Akaɖi ƒe xɔmenuwo si dzena abe premium ene

• Agbalẽtata ƒe nuxexlẽ nyuie wu

• LED-kaɖiwo ƒe keklẽ si wokpɔna dzi ɖe kpɔtɔ

• Atsyɔ̃ɖoɖo ƒe nuwuwu si le gbadzaa wu

Matte white kple matte translucent PVC bɔ vevietɔ na kplɔ̃dzikaɖiwo, anyigbakaɖiwo, amedzrodzeƒekaɖiwo kple pendant shades.

Dzobibi-nulénu PVC Agbalẽvi na Akaɖiwo

Wowɔ akaɖi si me dzo mele o PVC agbalẽ dzi nyawo be wòaɖe dzobibi dzi akpɔtɔ eye wòana dedienɔnɔ nanyo ɖe edzi le akaɖidɔwo me. Wobiaa esia zi geɖe na amedzrodzeƒewo ƒe akaɖiwo, asitsakaɖiwo, dutoƒo xɔmenuwo ƒe dɔwo kple akaɖi siwo wotsɔna ɖoa duta.

Ne èdi be yeaƒle nu vevie la, mègaɖo ŋu ɖe nyagbɔgblɔ 'dzobibi.' ko ŋu o. Bia dodokpɔmɔnu kple nyatakaka tso nudzrala gbɔ, abe UL 94, glow-wire dodokpɔ alo dzidzenu bubu siwo wò asi alo asisi bia ene.

Ele be ɖaseɖigbalẽ si ŋudɔ woate ŋu awɔ la nanye:

• Dzobibi ƒe dzeside alo dodokpɔ ƒe dzidzenu

• Kpɔɖeŋu ƒe titrime si wozã le dodokpɔa me

• Nenye be wodo nusi wotsɔ aŋenu ɖo megbe la kpɔ

• Nenye be wodo nusiwo wotsɔ avɔ wɔe kpɔ

• RoHS, REACH alo SGS ƒe nuŋlɔɖiwo ne ehiã

• Bulb ƒomevi si wokafu kple dɔwɔwɔ ƒe dzoxɔxɔ ƒe didime

Ele be woazã PVC akaɖiti agbalẽ dzi nyawo kple akaɖi ƒe nɔnɔme si sɔ, akaɖi ƒe ŋusẽ si sɔ kple dometsotso si sɔ tso dzoxɔxɔtsoƒewo gbɔ. Zi geɖe la, wolɔ̃a LED-kaɖiwo elabena womewɔa dzoxɔxɔ boo o wu akaɖi siwo me wodea dzoe alo halogen-kaɖi siwo wozãna tsã.

Woate ŋu atae PVC Agbalẽvi na Akaɖiwo

Wotrɔ asi le PVC akaɖiti agbalẽ dzi nyawo si woate ŋu ata ŋu kple eƒe akpa si sɔ na nuŋlɔtsi ƒe nuléle kple atsyɔ̃ɖoɖo ƒe agbalẽtata. Woate ŋu azãe na nɔnɔmetata siwo wowɔ ɖe ɖoɖo nu, adzɔnu ƒe dzeside ƒe nɔnɔmetatawo, dzesiwo, amedzrodzeƒe ƒe akaɖiwo ƒe nɔnɔmewo, ɖeviwo ƒe akaɖiwo, ɣeyiɣi ƒe atsyɔ̃ɖonuwo kple asitsaƒewo ƒe ɖeɖefia ƒe akaɖiwo.

Agbalẽtatamɔnu siwo bɔ dometɔ aɖewoe nye:

• Agbalẽtata le screen dzi

• UV dijitaal agbalẽtata

• Offset tata hena dzesi sesẽ siwo sɔ

• Kpɔɖeŋu tata hafi atsoe alo awɔe

Hafi woawɔe le agbɔsɔsɔ gã me la, do ink ƒe adhesion, curing temperature, amadede ƒe tɔtrɔ le backlighting te kple scratch tsitretsitsi kpɔ. Akaɖiti si wota ate ŋu ato vovo ne akaɖia tsi kple ne akaɖia klẽ, eyata da kpɔɖeŋuwo kpɔ ɣesiaɣi le akaɖi ƒe nɔnɔme ŋutɔŋutɔ me.

Adhesive vs Non-Adhesive PVC Agbalẽvi na Akaɖiwo

Adhesive PVC nyo wu ne woatsɔ avɔ, pepa alo gli aɖo agbalẽ dzi nyawo la dzi. Eɖea dɔwɔlawo dzi kpɔtɔna eye wònaa akaɖi siwo wotsɔ avɔ tsyɔ la ƒe wɔwɔme nyona ɖe edzi.

PVC si meléna ɖe nu ŋu o nyo wu ne agbalẽ dzi nyawo ŋutɔe nye akaɖiti si wokpɔna, ne asisi la azã nulénu ƒe mɔnu si le vovo alo ne ehiã be woata agbalẽ dzi nyawo la, alɔ̃e, alɔ̃e alo aƒoe nu ƒu le mɔ bubu nu.

Le akaɖidɔwɔƒe siwo ƒe lolome lolo gome la, tiatia eveawo siaa ate ŋu aɖe vi: nusi wotsɔna léa nu ɖe ​​nu ŋu PVC hena avɔ ƒe vɔvɔli wɔwɔ kple matte si meléna ɖe nu ŋu o alo esi woate ŋu ata PVC na atsyɔ̃ɖoɖo ƒe vɔvɔli ƒe ʋuƒo tẽ.

Matte kple Frosted kple Glossy PVC Agbalẽvi na Akaɖiwo

Matte PVC naa dzedzeme fafɛ, dzeani eye wòɖea nukpɔkpɔwo dzi kpɔtɔna. Esɔ na akaɖi siwo wotsɔ ɖoa ​​atsyɔ̃ na xɔme ƒe akpa gãtɔ.

Frosted PVC naa kekeli kaka sesĩe wu eye wòkpena ɖe ame ŋu be wòaɣla akaɖia nyuie wu. Eɖea vi ne kaka le vevie wu atsyɔ̃ɖoɖo le anyigba dzi.

Glossy PVC ɖea kekeli geɖe fiana eye ateŋu adze keklẽ wu, gake ateŋu aɖe keklẽ, ʋuʋudedi kple anyigba ƒe nɔnɔme madeamedziwo afia bɔbɔe. Zi geɖe la, wotiae na atsyɔ̃ɖoɖo tɔxɛwo tsɔ wu be woatiae na akaɖiti ƒe kaka le afisiafi.

Le egbegbe akaɖitidɔ akpa gãtɔ gome la, matte alo frosted PVC ye nye tiatia si le dedie wu.

Ale Si Nàtia Titrime Nyuitɔ

PVC akaɖiti agbalẽ dzi nyawo ƒe titrime kpɔa ŋusẽ ɖe asitɔtrɔ le nɔnɔme ŋu, nɔnɔme ƒe liƒo, kekeli ƒe kaka kple dɔwɔwɔ bɔbɔe dzi.

Mɔfiame si wozãna le tiatiawɔwɔ me si bɔ:

• 0.15 mm va ɖo 0.25 mm: vɔvɔli siwo le bɔbɔe, akaɖi suewo, atsyã siwo te ŋu trɔna bɔbɔe

• 0.25 mm va ɖo 0.35 mm: kpẽ ƒe vɔvɔli siwo wozãna ɖaa kple akaɖi siwo wotsɔ avɔ ƒo xlãe

• 0.35 mm va ɖo 0.50 mm: vɔvɔli ƒe wɔwɔme sesẽ wu kple asitsatsa ƒe akaɖiwo zazã

• Dzeside siwo le kpekpem wu siwo wowɔ ɖe ɖoɖo nu: atsyɔ̃ɖonuwo, nutsyɔnu sesẽwo alo fixture tɔxɛwo ƒe nɔnɔmewo

agbalẽ dzi nyawo s siwo le tsɛ wu la ʋuʋu kple wo ɖeɖe le bɔbɔe wu. agbalẽ dzi nyawo s siwo le kpekpem wu naa kpekpeɖeŋu nyuitɔ gake ateŋu abia be woawɔ wo nyuie wu. Titrime nyuitɔ nɔ te ɖe vɔvɔli ƒe didime, kɔkɔme, xɔtunu ƒe wɔwɔme, avɔa ƒe kpekpeme kple sesẽ si hiã dzi.

Vevietɔ Dzesidede Dzɔdzɔmenuwo Do Ŋgɔ Hafi Woawɔ Nudɔdɔ Le Agbɔsɔsɔme Me

Hafi nàwɔ nudɔdɔ gbogbo aɖe na PVC akaɖiti agbalẽ dzi nyawo , bia kpɔɖeŋuwo eye nàlé ŋku ɖe esiawo ŋu:

• Titrime dzigbɔɖi kple agbalẽ xatsaxatsa ƒe kekeme ƒe nyateƒetoto

• Anyigba ƒe nɔnɔme madeamedziwo, teƒe yibɔwo, sisi ƒe dzesiwo kple ʋuʋudediwo

• Kekeli ƒe kaka le akaɖi ŋutɔŋutɔ te

• Matte alo frosted ƒe nɔnɔme le kekeli megbe

• Adhesive peel ŋusẽ na ɖokui-adhesive grades

• Ink adhesion na dzesi siwo woate ŋu ata

• Dzobibi ƒe dodokpɔ ŋuti nyatakaka ne ehiã

• Ʋeʋẽ ƒe sesẽme na xɔme akaɖi zazã

• Anti-yellowing dɔwɔwɔ na ɣeyiɣi didi ƒe ɖeɖefia

• Nubablɛwo takpɔkpɔ na nudɔdɔwo ɖoɖo ɖe duta

Le akaɖiwo gome la, nusiwo gblẽ le wo ŋu suesuesuewo ate ŋu adze nyuie le akaɖiwo dodo vɔ megbe. Lé ŋku ɖe nusi wotsɔ wɔe ŋu ɣesiaɣi le xɔa me akaɖi si sɔ kple megbekaɖi siaa me.

Dɔwɔwɔwo le PVC Agbalẽvi na Akaɖiwo

Wozãa PVC akaɖiwu agbalẽ dzi nyawo s le atsyɔ̃ɖoɖo kple akaɖi geɖe siwo wɔa dɔ me, siwo dometɔ aɖewoe nye:

• Kplɔ̃dzikaɖi ƒe vɔvɔliwo

• Anyigbadzikaɖi ƒe vɔvɔliwo

• Pendant akaɖi ƒe nutsyɔnuwo

• Glidzikaɖi ƒe kakawo

• Amedzrodzeƒea ƒe xɔmekaɖiwo

• Nuɖuɖudzraƒe kple kɔfidzraƒe ƒe akaɖiwo

• Asitsaƒewo ƒe nukpɔkpɔ ƒe akaɖiwo

• Atsyɔ̃ɖoɖo ƒe kekeli ƒe ʋuƒo

• DIY akaɖi ƒe xɔtunuwo

• Akaɖiti siwo wota ɖe ɖoɖo nu

Le amedzrowɔwɔ kple asitsatsa ƒe dɔwo gome la, zi geɖe la, wogblɔa amadede si wowɔ ɖe ɖoɖo nu, matte finish, agbalẽtata kple dzotsitsi ƒe tiatia ɖekae.

PVC Agbalẽvi na Akaɖiwo vs Nu Bubuwo

Zi geɖe la, wotiaa PVC ne dɔa hiã na gazazã, asitɔtrɔ le nɔnɔmewo ŋu, kaka kple tɔtrɔ ɖe nɔnɔme ŋu ƒe dadasɔ ŋutɔŋutɔ.

Acrylic naa eƒe sesẽme nyona wu eye wònana eme kɔna wu gake egbãna wu eye zi geɖe la, exɔa asi wu. PET ƒe nukpɔkpɔ nyuie kple wɔwɔme ƒe dɔwɔwɔ le esi gake ateŋu abia dɔwɔwɔ ƒe nɔnɔme vovovowo. PP ƒe kpekpeme le bɔbɔe eye wòte ŋu trɔna bɔbɔe gake ɖewohĩ eƒe akpata kple agbalẽtata ƒe tiatia ʋɛ aɖewo koe anɔ eŋu. Dekɔnu akaɖi ƒe styrene bɔ ɖe DIY kple asinudɔwɔwɔ ƒe asiwo me, vevietɔ na adhesive megbe, gake ele be nuƒlelawo natsɔ dzoxɔxɔ ƒe tsitretsitsi, dzo ƒe dɔwɔwɔ, nuzazã ƒe nɔnɔme kple tɔtrɔ ɖe nɔnɔmewo ŋu ƒe tiatiawɔblɔɖe asɔ kple wo nɔewo.

Le atsyɔ̃ɖoɖo ƒe akaɖi siwo wowɔna le agbɔsɔsɔ gã me ƒe akpa gãtɔ gome la, PVC gakpɔtɔ nye tiatia si wɔa dɔ ŋutɔ.

Nukatae Nàtia HSQY PVC Agbalẽvi na Akaɖiwo

HSQY naa PVC akaɖi agbalẽ dzi nyawo s na akaɖiwɔlawo, atsyɔ̃ɖoɖo akaɖi wɔlawo kple OEM akaɖidɔwo. Tiatia siwo li dometɔ aɖewoe nye esi wotsɔa eɖokui léna ɖe nu ŋu PVC agbalẽ dzi nyawo , matte PVC akaɖiti agbalẽ dzi nyawo , ɣi si me kɔ PVC , si woate ŋu ata PVC agbalẽ dzi nyawo , dzomavɔ ƒe dzesi kple agbalẽ xatsaxatsa alo agbalẽ dzi nyawo ƒe lolome siwo wowɔ ɖe ɖoɖo nu.

HSQY ate ŋu ado alɔ:

• Titrime kple kekeme si wowɔ ɖe ɖoɖo nu

• Roll kple agbalẽ dzi nyawo nana

• Matte, glossy, frosted kple embossed nuwuwu

• Amadede ɣi, si me kɔ, si me mekɔ o kple esi wowɔ ɖe ɖoɖo nu

• Atike si me dzo mele o ne wobia

• Tiatia siwo woate ŋu ata le anyigba dzi

• Kpɔɖeŋu dodokpɔ hafi nudɔdɔ le agbɔsɔsɔ gã me

• Nubablɛwo ɖoɖo ɖe duta hena dukɔwo dome dɔdɔ

Ne èle akaɖi ƒe nu yeye aɖe wɔm la, na akaɖi ƒomevi, vɔvɔli ƒe lolome, akaɖi ƒomevi, anyigba ƒe nudidi kple asi si nèɖo taɖodzinu na. HSQY ateŋu aɖo aɖaŋu na PVC akaɖiti agbalẽ dzi nyawo ƒe nɔnɔme si sɔ na dodokpɔ.

Nya Siwo Wobiaa Enuenu Tso PVC Agbalẽvi na Akaɖiwo

Ðe PVC agbalẽ dzi nyawo sɔ na akaɖiwoa?

Ɛ̃. PVC agbalẽ dzi nyawo sɔ na akaɖiwo ne wowɔe le eƒe titrime, eƒe anyigba ƒe nuwuwu kple eƒe wɔwɔme nyuitɔ me hena akaɖi zazã. Lampshade-grade PVC kpena ɖe kekeli ŋu wòkaka, edoa alɔ vɔvɔli ƒe wɔwɔme eye woateŋu awɔ laminated, ata alo awɔe.

Nukae nye akaɖiti si léna ɖe eɖokui ŋu PVC agbalẽ dzi nyawo ?

Akaɖiti { PVC agbalẽ dzi nyawo ƒe nulénu si te ŋu léna ɖe nu ŋu si te ŋu léna ɖe nu ŋu si na woate ŋu atsɔ avɔ, pepa alo atsyɔ̃ɖoɖo ƒe nutsyɔnu asisi ɖe agbalẽ dzi nyawo la ŋu tẽ. Wozãnɛ zi geɖe tsɔ wɔa avɔ ƒe akaɖiwo kple DIY akaɖiwo wɔwɔ.

Ðe matte PVC nyo na akaɖitiwoa?

Ɛ̃. Matte PVC nyo ŋutɔ na akaɖiwo elabena eɖea keklẽ dzi kpɔtɔna, enaa wòdzena fafɛ eye wònaa kekeli ƒe akɔfafa nyona ɖe edzi. Wozãnɛ zi geɖe na egbegbe kplɔ̃dzikaɖiwo, anyigbakaɖiwo kple amedzrodzeƒe ƒe akaɖiwo.

Ðe PVC akaɖiti agbalẽ dzi nyawo ate ŋu anye esi me dzo mele oa?

Ɛ̃. PVC woateŋu awɔ akaɖi ƒe vɔvɔli agbalẽ dzi nyawo kple atike si me dzo mele o. Ele be nuƒlelawo nabia dodokpɔ ŋuti nyatakaka si sɔ eye woaɖo kpe edzi nenye be dodokpɔa ku ɖe PVC agbalẽ dzi nyawo ɖeɖeko ŋu alo akaɖi ƒe xɔtunu si wotsɔ laminated wɔe si wowu enu.

Ðe woate ŋu ata PVC akaɖiti agbalẽ dzi nyawo a?

Ɛ̃. PVC akaɖi ƒe vɔvɔli agbalẽ dzi nyawo ateŋu ata kple nɔnɔmetatawo, dzesiwo kple atsyɔ̃ɖoɖo ƒe nɔnɔmetatawo. Screen printing kple UV digital printing nye tiatia siwo bɔ, gake ele be woado ink ƒe adhesion kple megbeklẽ ƒe amadede ƒe dɔwɔwɔ kpɔ hafi awɔe le agbɔsɔsɔ gã me.

Titrime kae nyo wu na PVC akaɖiti agbalẽ dzi nyawo ?

Akaɖi ƒe dɔwɔwɔ geɖewo zãa PVC agbalẽ dzi nyawo s siwo le 0.15 mm kple 0.50 mm dome. agbalẽ dzi nyawo s tsɛwo te ŋu trɔna bɔbɔe eye wo ʋuʋu le bɔbɔe, gake agbalẽ dzi nyawo s siwo le kpekpem wu naa wɔwɔme sesẽ wu. Tiatia nyuitɔ nɔ te ɖe akaɖi ƒe lolome, eƒe xɔmenuwo kple eƒe nɔnɔme dzi.

Ðe PVC akaɖiti agbalẽ dzi nyawo sɔ kple akaɖi ƒe styrene?

Menye ɣesiaɣie o. Le asi aɖewo me la, wozãa 'akaɖi ƒe styrene' abe nya si wozãna na akaɖi ƒe megbedede si léna ɖe nu ŋu ene. PVC kple polystyrene nye plastic vovovowo, eyata ele be nuƒlelawo naɖo kpe nu ŋutɔŋutɔ, dzo ƒe dɔwɔwɔ, aŋɔ ƒomevi kple eƒe titrime dzi hafi abia.

Ðe woate ŋu azã PVC akaɖiti agbalẽ dzi nyawo kple LED-kaɖiwoa?

Ɛ̃. PVC akaɖiti agbalẽ dzi nyawo wozãna zi geɖe kple LED-kaɖi elabena LED-kaɖiwo mewɔa dzoxɔxɔ boo o wu incandescent alo halogen-kaɖiwo. Ðo kpe dzoxɔxɔ si le dɔ wɔm kple nusi woatsɔ aɖo wò akaɖi tɔxɛa dzi ɣesiaɣi.