ABS ƒe agbalẽ - HSQY plastic .

Nyabiasewo ƒe hatsotso .

ABS ƒe agbalẽvi .

Q Aleke woatso ABS ƒe plastik-gbadzɛwoe?

A .
ABS ƒe plastik gbadzɛwo lãɖeɖe le bɔbɔe kple dɔwɔnu kple aɖaŋu nyuitɔwo, le alesi wòaɖiɖi kple alesi wòle pɛpɛpɛe nu. Alesi:

Le agbalẽ tsɛwo (vaseɖe 1-2mm) gome la:

Dɔwɔnu si wotsɔna ƒoa nu ɖe ame ŋu alo dɔwɔnu si wozãna tsɔ dea dzesi nu: tsɔ nutrenu sesẽ, siwo nègbugbɔ ƒona enuenu la ƒo agbalẽa nu vaseɖe esime nètsoe le afã me. Emegbe nàbɔbɔ ɖe fli si dzi woŋlɔa nu ɖo la dzi be wòaƒu du dzadzɛ. Tsɔ sandpaper wɔ eƒe goawo nyuie ne ehiã.

Scissors alo tin snips: Le agbalẽ siwo le sue ŋutɔ alo lãɖeɖe siwo woƒo ɖe wo nɔewo ŋu gome la, lãgbalẽgolo alo snip siwo wɔa dɔ kpekpewo wɔa dɔ nyuie, togbɔ be ɖewohĩ ahiã be woawu goawo nu hã.

Na medium sheets (2-6mm):

Jigsaw: Zã akplɔ si ƒe aɖuwo le nyuie (10-12 TPI) si wowɔ na plastik. Tsɔ agbalẽa ƒo ɖe anyigba si li ke dzi, de dzesi wò fli eye nàtsoe le duƒuƒu si sɔ me be nàƒo asa na abs la ƒoƒo to ʋuʋudedi me. Na tsi alo ya nafa aŋutrɔa ne exɔ dzo akpa.

Klɔƒe si wotsɔ ƒo xlãe: Zã akplɔ si ƒe nugbɔ le abe carbide ene (aɖu ƒe xexlẽme si kɔkɔ, 60-80 TPI). De agbalẽa me ɖe te, lãe blewu eye nàlée ɖe te be wòaxe mɔ na ʋuʋudedi alo ʋuʋu.

Na panels siwo le ʋeʋẽm (6mm+):

Table Saw: Abe alesi wòle le aŋutsrɔe si le dzogoe ene me gome ene la, zã akplɔ si ƒe aɖuwo le nyuie eye nàtu ʋuƒoa to eme madzudzɔmadzudzɔe. Zã zero-clearance insert nàtsɔ aɖe chipping dzi akpɔtɔ.

-Band Saw: Gã na curves alo lãɖeɖe ɣiwo; Zã akplɔ si ƒe aɖuwo le gbadzaa, si ƒe aɖuwo le nyuie eye nàyi edzi blewuu be nàlé be na wò.

Aɖaŋuɖoɖo siwo ku ɖe amewo ŋu le mɔ gbadza nu:

Dzesidede: Zã pɛnsil alo dzesidenu si ŋu dzidzenu alo nɔnɔmetata le.

Dedienɔnɔ: Do dedienɔnɔ ƒe ŋkumewu kple ametakpɔnu - ABS ke ate ŋu ado dziku. Wɔ dɔ le teƒe si ya le.

Duƒuƒu ƒe duƒuƒu: kabakaba akpa ate ŋu alɔ̃ plastik la; blewu akpa ate ŋu ana nugbɔ siwo me mekɔ o nado. Do nu kakɛwo kpɔ gbã.

Nuwuwu: Nugbɔ siwo le gbadzaa kple 120-220 grit sandpaper alo zã deburring dɔwɔnu.
q Plastik gbadzɛ kae nyo wu, PVC alo ABS?

A .
Ne PVC alo ABS nye 'better ' la nɔ te ɖe wò hiahiã tɔxɛwo dzi – nu ɖesiaɖe naa viɖe vovovowo.

PVC sesẽ, eƒe asi bɔbɔ, eye wòte ŋu nɔa te ɖe atikewo, tsi, kple yame ƒe nɔnɔme nu ŋutɔ, si wɔe be wòsɔ nyuie na gota gome zazã (le kpɔɖeŋu me, pɔmpiwo, siding, dzesiwo). Enyea dzobibi eye meɖina ɖe anyi le UV keklẽ te kabakaba abe ABS si womewɔ atike na o ene. Gake megate ŋu nɔa te ɖe ŋusẽkpɔɖeamedzi nu boo o, ate ŋu azu azu azu azu ayemɔ, eye dzoxɔxɔ ƒe nɔnɔme mele bɔbɔe nenema gbegbe o.

To vovo na ema la, ABS sesẽna wu eye wòte ŋu nɔa te ɖe ŋusẽkpɔɖeamedzi nu wu, le dzoxɔxɔ si bɔbɔ wu gɔ̃ hã me, si me wowua enu wòklẽna si doa atsyɔ̃ɖoɖo ɖe ŋgɔ (le kpɔɖeŋu me, ʋu ƒe akpa aɖewo, elektrɔnikmɔ̃wo, kpɔɖeŋuwo). Ele bɔbɔe wu be woawɔ aŋɔ, mɔ̃, kple aŋɔ; Ke hã, mete ŋu nɔa te ɖe UV keklẽ nu boo o (si hiã be wòali ke le gota gome) eye dzoxɔxɔ ƒe mɔɖeɖe ɖe eŋu le sue wu (eƒe 105°C tsɔtsɔ sɔ kple PVC ƒe 80-100°C, le eƒe ƒomevi nu).
Q Nukae nye ABS ƒe plastik gbadzɛ?

ABS (acrylonitrile butadiene styrene) sheet nye thermoplastic si wɔa dɔ nyuie si wonya le eƒe sesẽ, sesẽ, kple dzoxɔxɔ ƒe tsitretsitsi ɖedzesi la ta. Dzoxɔxɔnu sia le klass vovovowo me, si naa nɔnɔme kple dɔwɔwɔ vovovowo. ABS plastic sheet ate ŋu awɔ dɔ tso thermoplastic dɔwɔwɔ ƒe mɔnu siwo katã wozãna ɖaa ŋu eye wòle bɔbɔe be woawɔ mɔ̃. Wozãa agbalẽvi sia enuenu na mɔ̃a ƒe akpa aɖewo, ʋu ƒe emenuwo, yameʋuwo ƒe emenuwo, agbawo, agbawo, kple bubuwo. Agbalẽ siawo siwo ƒe titrime nye, amadedewo, kple anyigba ƒe akpa vovovowoe le wo ŋu, eye wowɔ ɖe dukɔwo dome nyonyome ƒe dzidzenuwo dzi.

Nyabiasewo ƒe hatsotso .

ABS ƒe agbalẽvi .

Q Aleke woatso ABS ƒe plastik-gbadzɛwoe?

q Plastik gbadzɛ kae nyo wu, PVC alo ABS?

Q Nukae nye ABS ƒe plastik gbadzɛ?

Trays .

Plastik-gbalẽvi .

De megbe