Wowɔ ha: Fie » Plastik krataa . » Pet krataa . » Petg a wɔde siesie fie . » HSQY Embossing PETG sini

Fa kyɛ:

HSQY Embossing PETG Film .

PETG Film wɔ awieɛ ne soro ayaresa, a nea ɛka ho ne kɔla a ɛyɛ den, marble, nnua a ɛyɛ fɛ, gloss a ɛkorɔn, honam ani hwɛbea, ne nea ɛkeka ho, a ɛma ɛyɛ nea eye ma laminating kɔ soro ahorow.

Nhwɛsoɔ:
Hspdf .
Adeban:
HSQY .
Nneɛma a ɛyɛ den: .
0.25 - 1 mm .
Ntrɛmu:
1250mm, wɔayɛ no sɛnea ɛte .

Nneɛma a ɛwɔ hɔ:



Nhwehwɛmu

Petg a wɔde siesie fie .

Petg a wɔde siesie fie .

Nkyerɛmu

Laminate yɛ ade a ɛyɛ adwuma pii na ɛho ka sua a wɔtaa de di dwuma wɔ dan mu nneɛma ne nneɛma a wɔde yɛ dan mu nneɛma mu. PETG Film yɛ trend material foforo a wɔde di dwuma wɔ furniture manufacturing mu de si laminating film afoforo ananmu. Wɔde PET plastic nneɛma na ɛyɛ, a ɛyɛ nea eye sen biara a wɔde yɛ nneɛma, ɛyɛ den, na ɛko tia nnuru. PETG sini no yɛ nea ɛnyɛ nea atwa yɛn ho ahyia ho bɔne sen sini afoforo a wɔde laminating ayɛ, na ɛma ɛyɛ ade a eye ma laminating a ɛkɔ nneɛma ahorow so.

HSQY Plastic de PETG sini ahorow a ɛwɔ ahorow ahorow a wɔde wie ne soro ayaresa te sɛ kɔla a ɛyɛ den, marble, nnua a wɔde ayɛ, gloss a ɛkorɔn, honam ani nka, ne nea ɛkeka ho ma wo akwaaba sɛ wo ne yɛn bedi nkitaho na woanya nsɛm pii.

Nsɛm a Wɔakyerɛkyerɛ Mu .

Product asɛm no .	PETG sini .
Atadeɛ	PETG plastic .
Ahosuo	Nnua a wonya, abo a wonya fi mu series, ne nea ɛkeka ho.
Ntrɛmu	1250mm, wɔayɛ no sɛnea ɛte .
Nneɛma a ɛyɛ den .	0.25 - 1 mm.
Ani	Ɛyɛ mmerɛw, ɛyɛ hyew kɛse, em bossed, matte, kɔla a ɛyɛ den, matel, ne nea ɛkeka ho.
Abisadeɛ	Nneɛma a wɔde siesie fie, nkuku, apon, afasu, fam, ne nea ɛkeka ho.
Su	Scratch-resistant, nsu ntumi nkɔ mu, ogya ntumi nhyew, nnuru ntumi nkɔ mu, ɛmma wim tebea ntumi nyɛ yiye, ɛnyɛ den sɛ wobɛtew ho, na ɛnyɛ nea atwa yɛn ho ahyia.

Nneɛma a ɛwɔ laminates mu a wɔde PETG sini di dwuma .

Aniwa a ɛyɛ fɛ a wɔde aniwa hu .

PETG sini a ɛyɛ fɛ a ɛyɛ fɛ a ɛyɛ fɛ no de anim a ɛyɛ fɛ na ɛyɛ adwumayɛfo de ka laminate no ho. Ɛma kɔla, emu dɔ, ne nea ɛyɛ fɛ a ɛwɔ soro no yɛ kɛse, na ɛma ɛda nsow wɔ baabiara.

Nneɛma a ɛbɔ ho ban wɔ soro .

PETG sini no yɛ adwuma sɛ ade a ɛbɔ ho ban, na ɛbɔ laminate no ho ban fi nsensanee, nsu, ne da biara da a ɛho asɛe ho. Ɛboa ma nsu no ani kɔ so yɛ fɛ na ɛma ne nkwa nna yɛ tenten.

Ɛnyɛ den sɛ wobɛpopa .

Petg laminated yɛ mmerɛw sɛ wobɛhohoro ho na woahwɛ so. PETG film no ani a ɛyɛ mmerɛw no mma efĩ ne nkekae ntumi nkɔ mu, na ɛma ɛyɛ mmerɛw sɛ wobɛpopa nsu biara a ɛbɛhwie agu anaasɛ ɛho ayɛ fĩ.

UV a ɛko tia .

PETG film no wɔ UV resistance a ɛkyɛn so, a ɛmma laminated no ani nsakra na ɛyera esiane owia hann a ɛda adi nti.

Nneɛma ahorow a wɔyɛ .

PETG laminates wɔ kɔla ahorow, nea wɔde wie, ne ayaresa ahorow, na ɛma wotumi yɛ adebɔ ho nhyehyɛe. Wobetumi ayɛ no sɛnea ɛfata ma ɛne afɛfɛde ahorow a ɛyɛ fɛ ne nea ɛwɔ mu no ahyia.

Dada:

Deɛ ɛdi hɔ: