HIPS Nkrataa

HIPS Krataa Yɛfo a Wɔyɛ Thermoforming ne Printing

HSQY PLASTIC yɛ na ɛde HIPS nkrataa a wɔde yɛ thermoforming, vacuum forming, printing, signage, displays, frigye liners, mfiri afã horow, packaging trays, industrial covers ne electronic packaging ma.

HIPS gyina hɔ ma High Impact Polystyrene . Ɛyɛ rɔba-sesa polystyrene ade a wɔayɛ sɛ ɛbɛma toughness kɛse ne impact resistance sen general-purpose polystyrene bere a kura rigidity pa, printability ne forming adwumayɛ.

HSQY mprempren gyinapɛn HIPS krataa ahorow no kata bɛyɛ 0.2–6 mm thickness , trɛw kosi bɛyɛ 1600 mm , gyinapɛn 1220 × 2440 mm / 4 × 8 ft krataa, ne fitaa, tuntum, kɔla ne amanne-kɔla ahorow a wobetumi apaw.

HSQY nso de ESD tuntum soronko ne anti-static HIPS krataa ne roll ma ɛlɛtrɔnik nneɛma a wɔde kyekyere nneɛma. Ɛsɛ sɛ wɔpaw anyinam ahoɔden adwumayɛ sɛnea wɔhwehwɛ sɛ wɔde gyina soro a ɛko tia ne ɔkwan a wɔfa so sɔ hwɛ sen sɛ wɔbɛpaw ade no kɔla nkutoo.

Dɛn Ne HIPS Krataa?

HIPS krataa yɛ thermoplastic krataa a wɔayi afi mu a wɔde polystyrene a wɔayɛ no foforo a wɔde rɔba fã a ɛma nkɛntɛnso yɛ kɛse ayɛ.

Standard general-purpose polystyrene yɛ katee nanso sɛ wɔde toto ho a, ɛyɛ mmerɛw. Rɔba nsakraeɛ a wɔde di dwuma wɔ HIPS mu no ma ɛyɛ den na ɛko tia mpaapaemu, na ɛma HIPS fata kɛseɛ ma trays a wɔayɛ no thermoformed, appliance liners, printed displays ne fabricated components.

Wɔtaa paw HIPS wɔ baabi a adwuma bi hia sikasɛm mu nkabom a ɛyɛ rigidity, impact resistance, thermoformability, printability ne fabrication a ɛnyɛ den a enhia sɛ wɔyɛ adwuma a ɛkorɔn a ɛyɛ engineering plastics a ne bo yɛ den.

HIPS Krataa no mu Nsɛm a Wɔakyerɛkyerɛ Mu

Adwadeɛ	Polystyrene Krataa a Ɛwɔ Nkɛntɛnso Kɛse / HIPS Plastic Krataa
Atadeɛ	Polystyrene a wɔde rɔba ayɛ mu nsakrae / Polystyrene a ɛwɔ nkɛntɛnso kɛse
Standard Thickness Range a Ɛyɛ Fɛ	Bɛyɛ 0.2–6 mm
Nneɛma a Ɛyɛ Den a Wɔada no adi	0.5 mm, 1.0 mm, 2.0 mm ne nneɛma a wɔde susuw nneɛma a wɔayɛ no sɛnea wɔpɛ
Standard Krataa no Kɛse	1220 × 2440 mm / bɛyɛ anammɔn 4 × 8
Mprempren Trɛw a Ɛsen Biara	Bɛyɛ 1600 mm ma mprempren gyinapɛn HIPS nneɛma abusua
Kɔla ahorow	Kɔla fitaa, tuntum, kɔla ne amanne kɔla
Standard Surface a ɛwɔ soro	Ɔfa a ɛyɛ torotoro; ɛsɛ sɛ wɔde grade si gloss, texture anaa application-specific surface requirements so dua
Krataa a Wɔde Ma	Nkratafa a ɛyɛ tratraa ne rollstock ho nsɛm a wɔapaw
Nneɛma a wɔyɛ	Thermoforming, vacuum forming, die twa, CNC twa, drilling, tintim, mfonini ne laminating
Abasobɔde a Ɛyɛ Titiriw	Black ESD / anti-static HIPS a ɛwɔ hɔ ma ɛlɛtrɔnik nneɛma a wɔde kyekyere nneɛma a wɔapaw
Nnwuma Titiriw a Wɔde Di Dwuma	Afã horow a wɔayɛ no thermoformed, frigye mu nneɛma, mfiri no afã horow, nneɛma a wɔde kyekyere nneɛma, nsɛnkyerɛnne, nneɛma a wɔde kyerɛ, mfonini ahorow a wɔatintim ne ɛlɛtrɔnik nneɛma a wɔde kyekyere nneɛma

Mfaso Titiriw a Ɛwɔ Polystyrene Krataa a Ɛwɔ Nkɛntɛnso Kɛse So

Thermoforming Adwumayɛ Pa: Wobetumi ayɛ HIPS hyew na wɔayɛ no trays, liners, covers, housings ne afã afoforo a ɛwɔ afã abiɛsa denam thermoforming mfiri a ɛfata so.

Toughness a Ntu mpɔn: Rɔba a wɔsakra no ma ɛko tia kɛse wɔ nkɛntɛnso ne mpaapaemu ho sen GPPS a wɔtaa de di dwuma.

Printability Pa: HIPS surfaces a ɛfata betumi aboa screen printing, digital printing ne printing akwan afoforo bere a wɔasi nea ɛne ne ho hyia ne surface-treatment ahwehwɛde ahorow no so dua akyi.

Easy Fabrication: HIPS betumi atwitwa, drilled, routed, die-twit, laminated na fabricated ayɛ no customized afã horow.

Good Dimensional Stability: HIPS ma mfasoɔ kari pɛ wɔ rigidity ne toughness ma trays, nsɛnkyerɛnneɛ, liners ne fabricated panels.

Custom Colors: White, tuntum ne customized kɔla nkrataa betumi ama sɛnea product design ahwehwɛde ahorow.

Nneɛma a Wɔyɛ a Ɛho Ka sua: Wosusuw HIPS ho kɛse ma nneɛma a wɔde yɛ nneɛma pii ne nea wɔde tintim wɔ baabi a ɛho hia sɛ wɔde thermoplastic krataa a ɛho ka sua.

Standard HIPS vs. ESD HIPS Krataa

Feature	Standard HIPS	ESD / Anti-Static HIPS
Dwumadi Titiriw	General impact-resistant nhyehyɛe ne fabrication	Forming plus application-specific static-control adwumayɛ
Mprempren HSQY Thickness	Bɛyɛ 0.2–6 mm	Bɛyɛ 0.2–1.8 mm wɔ mprempren ESD ade a wɔahyira so no so
Ahosuo	Kɔla fitaa, tuntum ne amanne kwan so kɔla	Mprempren HSQY ahofama ESD ade no yɛ tuntum
Nnwuma a Wɔtaa De Di Dwuma	Displays, liners, packaging, afã horow a wɔayɛ no thermoformed ne panels a wɔatintim	IC, PCB, PCBA, SMT ne ɛlɛtrɔnik-afã trays anaasɛ ahobammɔ nneɛma a wɔde kyekyere nneɛma
Electrical Ho Nsɛm a Wɔakyerɛkyerɛ Mu	Wɔntaa nkyerɛ mma static-control applications	Ɛsɛ sɛ wosi botae no ani a ɛko tia ne ɔkwan a wɔfa so sɔ hwɛ no so dua ansa na wɔakra

Anti-static, static-dissipative ne conductive nyɛ nsɛmfua a wɔsesa. Ɛsɛ sɛ wɔn a wɔtɔ ɛlɛtrɔnik-packaging no de anyinam ahoɔden a ɛko tia a wɔhwehwɛ, sɔhwɛ nhyehyɛe ne ɔsom tebea ma bere a wɔrebisa ESD nneɛma no.

HIPS Krataa a Wɔde Yɛ Thermoforming

Thermoforming yɛ dwumadie a ɛho hia paa ma High Impact Polystyrene krataa no mu baako.

Wɔ thermoforming mu no, wɔma HIPS krataa no yɛ hyew kosi sɛ ɛbɛyɛ nea ɛyɛ mmerɛw sɛnea ɛsɛ na afei wɔde vacuum, nhyɛso anaa mfiri mmoa na ɛyɛ no tia nkuku.

Nneɛma a wɔde di dwuma no bi ne mfiri a wɔde hyɛ mu, nneɛma a wɔde kyekyere nneɛma, nneɛma a wɔde kyerɛ, kar mu afã horow, adan, nkataso ne nneɛma afoforo a wɔayɛ.

Wɔ deep-draw afã horow no, ɛsɛ sɛ adetɔfo de mfitiase krataa no mu duru, cavity depth, draw ratio, mold dimensions ne nea wɔhwehwɛ awie ɔfasu thickness ma sɛnea ɛbɛyɛ a wobetumi asusuw starting gauge no ho.

HIPS Krataa a wɔde yɛ Vacuum Forming

Wɔtaa paw HIPS ma vacuum forming efisɛ grades a ɛfata betumi ayɛ nneɛma a ɛkɔ akyiri a ɛwɔ afã abiɛsa denam akwan a ɛyɛ tẽẽ kakra a wɔfa so yɛ no so.

Ɛsɛ sɛ wɔde nkuku ankasa, ɔhyew nhyehyɛe ne sɛnea wɔyɛ no mu dɔ na ɛsɔ vacuum-forming adwumayɛ hwɛ efisɛ sɛ wɔtrɛw mu dodo a, ebetumi atew ɔfasu no mu duru so wɔ ntwea so ne abura a emu dɔ mu.

Ansa na wɔbɛyɛ pii no, sɔ ɔfã nkyerɛase, ɔfasu-kɛseɛ kyekyɛ, shrinkage, trimming, flatness ne awiei nkɛntɛnso adwumayɛ hwɛ.

HIPS Krataa a Wɔde Ntintim ne Nsɛnkyerɛnne

HIPS betumi ama baabi a ɛyɛ mmerɛw a wobetumi atintim ama nneɛma a wɔde kyerɛ wɔ baabi a wɔtɔ nneɛma, nsɛnkyerɛnne, mfonini ahorow, nsɛm a wɔde hyɛ nkurɔfo nkuran ne nneɛma a wɔakyerɛw din wɔ so.

Ɛgyina tintim nhyehyɛe no so no, abasobɔde a ɛfata betumi aboa screen printing, UV anaa dijitaal tintim ne aguadi mu tintim akwan afoforo.

Ntintim adwumayɛ gyina ahoɔden a ɛwɔ soro, ɔfasuo ayaresa, ink nnuru, ɔkwan a wɔfa so sa yareɛ ne ɔfasuo awie so. Sɛ corona ayaresa anaa dyne dodow pɔtee bi ho hia a, fa ka adetɔ ho nkyerɛkyerɛmu no ho sen sɛ wobɛfa no sɛ HIPS grade biara wɔ surface treatment koro no ara.

HIPS ma Fridge Liners ne Mfiri Afã horow

High Impact Polystyrene yɛ nea wosusuw ho kɛse ma frigye mu nneɛma ne mfiri dwumadie ɛfiri sɛ ɛtumi ka rigidity, forming tumi, surface appearance ne impact resistance bom.

Nneɛma a ebetumi ayɛ nneɛma bi ne frigye mu nneɛma, drawer afã horow, mfiri adan, nkataso ne thermoformed mu nneɛma.

Ɛsɛ sɛ mfiri nnwuma kyerɛ ɔhyew a wɔde yɛ adwuma, nnuru a wɔde hohoro nneɛma anaa nnuru a wɔde di dwuma, nkɛntɛnso a wɔhwehwɛ, kɔla, hyerɛn, forming depth ne mfiri gyinapɛn biara a ɛfata.

HIPS Krataa a wɔde kyekyere nneɛma ne Trays

Thin HIPS krataa betumi thermoformed ayɛ trays, inserts, ahobammɔ packaging, cosmetic packaging ne mfiridwuma afã packaging.

Ɛsɛ sɛ wɔn a wɔtɔ nneɛma a wɔde kyekyere nneɛma no kyerɛkyerɛ sɛnea wɔyɛ no mu dɔ, ɔfã bi a ɛyɛ katee, nkɛntɛnso a wɔhwehwɛ, sɛnea wotumi de boaboa ano, kɔla ne aduan-nkitahodi, nnuru anaa ɛlɛtrɔnik-packaging ahwehwɛde biara mu ansa na wɔapaw grade.

ESD HIPS Krataa a Wɔde Fa Ɛlektrɔnik Nneɛma a Wɔde Gu Mu

HSQY tuntum ESD HIPS ade no yɛ nea wɔayɛ ama thermoformed electronic packaging te sɛ IC trays, semiconductor trays, PCB ne PCBA trays, FPC carriers, SMT component trays ne ahobammɔ component packaging.

Mprempren ESD ade a wɔatu ho ama no wɔ hɔ a ne kɛse bɛyɛ 0.2–1.8 mm na wobetumi de ama wɔ krataa anaa nhoma mmobɔwee a wɔayɛ no sɛnea wɔpɛ mu.

Esiane sɛ thermoforming betumi atrɛw ade no mu na asesa mpɔtam hɔ ɔfasu no mu duru nti, ɛsɛ sɛ wosi ESD adwumayɛ so dua wɔ tray a wɔayɛ awie no so bere a anyinam ahoɔden a ɛko tia no ho hia no.

White, Black ne Colored HIPS Sheets

Kɔla	a Wɔtaa Paw Akwankyerɛ
HIPS fitaa	Mfiri a wɔde hyɛ mu, tintim, nsɛnkyerɛnne, nneɛma a wɔde kyerɛ ne nneɛma a wɔayɛ no thermoformed
Abibifo HIPS	Mfiridwuma mu nkataso, nneɛma a wɔde kyerɛ, nneɛma a wɔayɛ ne ɛlɛtrɔnik nneɛma a wɔde kyekyere nneɛma titiriw
HIPS a ɛwɔ kɔla ahorow	Retail displays, branded products, nneɛma a wɔde siesie fie ne nneɛma pɔtee a wɔde di dwuma
Kɔla a Wɔayɛ no Amanneɛbɔ	Wobetumi de honam fam nhwɛsode, kɔla nkyerɛkyerɛmu anaa botae a wɔapene so aka kɔla a ɛne ne ho hyia ho asɛm

Sɛnea Wobɛpaw HIPS Krataa a Ɛyɛ Den

HIPS kɛse a ɛfata gyina ɔfã kɛse, forming bun, stiffness a wɔhwehwɛ, impact ahwehwɛde, tintim nhyehyɛe ne fabrication kwan.

Thickness Range	General Paw Akwankyerɛ
0.2–0.5 mm	Nneɛma a wɔde kyekyere nneɛma a ɛyɛ tratraa, ɛlɛtrɔnik tray, nneɛma a wɔde hyɛ mu ne nneɛma a wɔde thermoformed a emu yɛ hare
0.5–1.0 mm	Packaging trays, printed panels, displays ne nneɛma a wɔayɛ a emu yɛ hare
1.0–2.0 mm	Afã akɛse a wɔayɛ no thermoformed, mfiri no afã horow, nneɛma a wɔde kyerɛ ne nkataso a ɛbɔ ho ban
2.0–4.0 mm	Nsɛnkyerɛnne a ɛyɛ katee kɛse, afã horow a wɔahyehyɛ, liners ne mfiridwuma mu nneɛma a wɔayɛ
4.0–6.0 mm	Heavy-gauge formed anaa fabricated applications a ɛhwehwɛ kɛse sɛ mfiase-kratafa rigidity

Wɔ thermoforming ho no, ɛsɛ sɛ wɔde ɔfã a wɔawie no geometry paw mfiase mu duru efisɛ mfonini a emu dɔ betumi atew mpɔtam hɔ ɔfasu no mu duru so kɛse.

4 × 8 HIPS Krataa a ɛyɛ fɛ

HSQY de standard 1220 × 2440 mm HIPS nkrataa , a wɔtaa frɛ no bɛyɛ 4 × 8 ft nkratafa ma.

Saa nhyehyeɛ yi ho wɔ mfasoɔ ma wɔn a wɔkyekyɛ, wɔn a wɔyɛ nsɛnkyerɛnneɛ, thermoformers ne fabricators a wɔde standard sheet-processing equipment di dwuma.

Wobetumi nso aka amanne kwan so nsusuwii ne ntrɛwmu a ɛkɔ bɛyɛ mm 1600 ho asɛm sɛnea ne kɛse ne nea wɔyɛ no ho ahwehwɛde ahorow te.

HIPS Krataa vs. GPPS Krataa

Feature	HIPS	GPPS
Nneɛma a Wɔde Yɛ Adwuma	Polystyrene a wɔde rɔba ayɛ mu nsakrae	Polystyrene a wɔde di dwuma wɔ ɔkwan a ɛkɔ akyiri so
Mmaeɛ	Mpɛn pii no, ɛnyɛ nea wontumi nhu	Mpɛn pii no, ɛyɛ nea ɛda adi na ɛhyerɛn
Nkɛntɛnso a Wɔko tia	Ɔkorɔn esiane rɔba nsakrae nti	Ɛyɛ brittle kɛse
Ade Titiriw a Wɔde Paw Wɔn	Toughness, forming ne tintim	Transparency, rigidity ne sikasɛm mu pefee krataa
Nnwuma a Wɔtaa De Di Dwuma	Tray a wɔayɛ no thermoformed, displays, appliance liners ne nneɛma a wɔatintim	Nneɛma a wɔde kyerɛ a emu da hɔ, frame, panels a ɛda adi pefee ne nneɛma a wɔde siesie fie

Sɛ wopɛ dwumadie a ɛhwehwɛ sɛ wode polystyrene a wɔde di dwuma wɔ ɔkwan a ɛkɔ akyiri so a, hwɛ yɛn        GPPS Nkrataa.

HIPS Krataa vs. ABS Krataa

a Wɔpaw Factor	HIPS	ABS
Gyinabea a Wɔtaa De Si Hɔ	Sikasɛm mu nhyehyɛɛ ne tintim nneɛma a wɔde yɛ adwuma a ɛwɔ mfinimfini	Engineering thermoplastic ma applications a ɛhwehwɛ sɛ ɛsono kari pɛ wɔ ahoɔden, toughness ne ɔhyew adwumayɛ
Nneɛma a wɔde yɛ ɔhyew	Wɔde di dwuma kɛse ma nneɛma a wɔde thermoformed a ɛho ka sua	Afei nso wɔtaa yɛ thermoformed ma nneɛma a ɛhwehwɛ pii
Nhoma tintim	Strong application fit ne print-grade soro a ɛfata	Ntintim gyina ABS ani ne dwumadie a wɔhwehwɛ so
Gyinaesi a Wɔtaa Si wɔ Adetɔ Ho	Paw bere a sikasɛm mu nhyehyɛe ne nea wotumi tintim yɛ nneɛma a ɛho hia titiriw	Hwɛ bere a ade a wɔawie no hwehwɛ sɛ wɔyɛ mfiridwuma mu adwumayɛ a ɛkorɔn

Sɛ wopɛ engineering-plastic applications a ɛyɛ den kɛse a, fa adwuma no ahwehwɛde toto yɛn        ABS Nkrataa.

Anohyeto ahorow a Ɛho Hia a Ɛwɔ HIPS Krataa no Mu

HIPS yɛ nea wotumi de yɛ nneɛma pii, nanso ɛnsɛ sɛ wɔyɛ no ara kwa sɛ mfiridwuma ho plastic ma nneɛma a atwa yɛn ho ahyia biara.

UV a Wɔde Di Dwuma wɔ Abɔnten

Standard HIPS wɔ UV a ɛko tia bere tenten no anohyeto. Ɛsɛ sɛ wɔde aduru a wɔde UV ayɛ a ɛyɛ den a wɔde di dwuma pɔtee di dwuma wɔ abɔnten so anaasɛ ade foforo a ɛko tia wim tebea kɛse bere a wɔhwɛ kwan sɛ owia hann bɛkɔ so akyɛ no.

Nneɛma a Wɔde Di Dwuma wɔ Ɔhyew a Ɛkorɔn Mu

Ɛnsɛ sɛ wɔde nneɛma din nkutoo na ɛpaw HIPS ma wɔde di dwuma wɔ ɔhyew a ɛkɔ soro mu. Kyerɛ ɔhyew a ɛkɔ so ne nea ɛkɔ soro sɛnea ɛbɛyɛ a wobetumi asusuw abasobɔde ankasa ho.

Nnuru a Wɔde Di Dwuma

Nnuru a ɛko tia no gyina ade a ɛwɔ mu, ne dodow, ɔhyew ne nhyɛso a wɔde ba ade a wɔawie no so. Sɔ nneɛma a wɔde tew nneɛma ho ankasa, ngo, nnuru a wɔde siw ano anaa nnuru a wɔde yɛ adwuma hwɛ ansa na woapene so awiei koraa.

Aduan-Nkitahodi HIPS Krataa

Ɛnsɛ sɛ wɔka standard industrial HIPS ho asɛm ara kwa sɛ ɛne aduan a wɔde di nkitaho no hyia.

Sɛ wɔde HIPS bedi dwuma ama nnuan a wɔde kyekyere nneɛma, frigye mu nneɛma a ɛma aduan di nkitaho anaasɛ nneɛma afoforo a wɔahyɛ ho mmara a, fa gua a wɔde kɔ, aduan ko, tebea a wɔde di nkitaho ne mmara a wɔhwehwɛ ma ansa na woapaw ade no.

Ɛsɛ sɛ wɔsi mmara ho nkrataa so dua ma resin a wɔde ama no pɛpɛɛpɛ, kɔla ne ne grade.

Sɛnea Wobɛpaw HIPS Krataa a Ɛfata

1. Kyerɛkyerɛ Dwumadi no mu

Kyerɛ thermoforming, vacuum forming, tintim, frigye liner, mfiri fã, nneɛma a wɔde kyekyere, nsɛnkyerɛnne, ɔyɛkyerɛ anaa ɛlɛtrɔnik nneɛma a wɔde kyekyere nneɛma.

2. Paw Standard anaa ESD HIPS

Standard HIPS fata ma general forming ne printing, bere a electronic packaging betumi ahwehwɛ sɛ wɔakyerɛkyerɛ mu anti-static, dissipative anaa conductive grade.

3. Si Thickness no so dua

HSQY mprempren de HIPS a ɛyɛ pɛpɛɛpɛ ma wɔ bɛyɛ 0.2–6 mm mu. Ɛsɛ sɛ wɔsɔ afã horow a wɔayɛ no hyew no hwɛ sɛnea ɔfasu no mu duru a etwa to te na wɔtwe emu dɔ.

4. Si Krataa Kɛse anaa Roll Format no so dua

Standard 1220 × 2440 mm nkratafa wɔ hɔ. Fa afiri no trɛw, nkuku kɛse anaa nea wɔhwehwɛ awie krataa nsusuwii ma ama nea wɔahyɛ da ayɛ.

5. Paw Kɔla

Kyerɛ kɔla fitaa, tuntum anaa amanne kwan so. Fa honam fam nhwɛsode a wɔapene so anaa kɔla a wɔagye atom ma bere a ɛho hia sɛ wɔde kɔla hyia yiye no.

6. Si Ahwehwɛde a Ɛfa Ntintim Ho no So dua

Fa ɔkwan a wɔfa so tintim, ink nhyehyɛe, ɔfasuo a wɔhwehwɛ ne dyne a wɔhwehwɛ ma baabi a ɛfata.

7. Si Thermoforming Ahwehwɛde ahorow no so dua

Ma forming bun, nkuku nsusuwii, vacuum anaa nhyɛso forming nhyehyɛe ne ahwehwɛde wie ɔfasu thickness.

8. Si Ɔsom Atwa Yɛn Ho Ahyia no So dua

Kyerɛ sɛnea wɔde di dwuma wɔ dan mu anaa abɔnten, ɔsom mu hyew, nnuru a wɔde di dwuma ne mfiri-nsunsuanso ahwehwɛde ahorow.

9. Si Mmara Ahwehwɛde ahorow so dua

Sɛ aduan a wɔde di nkitaho, ɛlɛtrɔnik mfiri, ogyaframa adwumayɛ anaa ahwehwɛde foforo a wɔahyɛ ho mmara fa ho a, kyerɛ gyinapɛn pɔtee no ansa na woapene nneɛma so.

10. Sɔ Production Sample bi hwɛ

Fa tintim, nwene, twa anaa boaboa ano ankasa susuw nneɛma no ho ansa na woapene ahyɛde kɛse a wɔayɛ no sɛnea wopɛ so.

Custom HIPS Krataa a Wɔyɛ

HSQY boa HIPS krataa nnwuma a wɔayɛ no sɛnea wɔpɛ ma thermoformers, mfiri a wɔyɛ, nnwumakuw a wɔde nneɛma gu mu, nnwumakuw a wotintim nhoma, wɔn a wɔyɛ nsɛnkyerɛnne, wɔn a wɔde ɛlɛtrɔnik-packaging ma ne wɔn a wɔkyekyɛ plastic.

Nneɛma a wɔahyɛ da ayɛ no betumi ayɛ:

• Amanneɛbɔ thickness mu a ɛfata production range

• 1220 × 2440 mm gyinapɛn nkrataa

• Amanne krataa nsusuwii

• Ntrɛwmu a ɛkɔ bɛyɛ 1600 mm ma mprempren gyinapɛn nneɛma

• HIPS fitaa ne tuntum

• Kɔla ahorow a wɔahyɛ da ayɛ

• Nneɛma a wɔde tintim nhoma a ɛfa dwumadie pɔtee bi ho

• Thermoforming ne vacuum-forming nkyerɛwde ahorow

• Black ESD HIPS krataa ne nhoma mmobɔwee

• Panel ahorow a wɔatwa no sɛnea ne kɛse te

• Die a wotwa

• CNC a wɔde twa

• Drill a wɔde tu fam

• Printing ne laminating ahwehwɛde ahorow

• Nneɛma a wɔde kyekyere nneɛma a wɔde kɔ amannɔne a wɔahyɛ da ayɛ

HIPS Krataa a Ɛhwɛ Nneɛma Pa So

Nhwehwɛmu ne pene a wɔpene so parameters a ɛho hia betumi ayɛ:

• Sheet thickness ne abodwokyɛre

• Trɛw ne tenten a wotumi gyina ano

• Nkratafa a ɛyɛ tratraa

• Kɔla a ɛkɔ so pɛpɛɛpɛ

• Sɛnea ɛte wɔ soro

• Nkɛntɛnso adwumayɛ wɔ baabi a wɔakyerɛ

• Rigidity a ɛyɛ katee

• Thermoforming adwumayɛ

• Shrinkage akyi forming wɔ baabi a ɛfata

• Printing adhesion wɔ baabi a ɛho hia

• Surface treatment wɔ baabi a wɔakyerɛ

• ESD soro a ɛko tia baabi a ɛho hia

• Twitwa ne fabrication nsusuwii ahorow

• Packing ne pallet tebea

Nneɛma a Wɔde Gu Nneɛma Mu ne Amanaman Ntam Nneɛma a Wɔde Fa Nneɛma Kɔ

Wobetumi ahyɛ HIPS nkratafa no mu sɛnea nkratafa no kɛse, ne kɛse, ne soro ne ne akwantu ho ahwehwɛde ahorow te.

Wobetumi aka ahobammɔ wrapping, kraft krataa, PE film, cartons anaa palletized export packaging ho asɛm sɛnea wɔasi so dua sɛ aduru no nkyerɛkyerɛmu.

Sɛ wopɛ rollstock anaa thin-gauge nneɛma a, fa roll trɛw a wɔhwehwɛ, roll mu duru, core ahwehwɛde ne thermoforming-machine anohyeto ahorow ma ansa na wɔayɛ.

Dɛn Nti na Wopaw HSQY sɛ Wo HIPS Krataa Yɛfo?

0.2–6 mm Standard Range: HSQY mprempren gyinapɛn HIPS nneɛma kata thin-gauge forming nneɛma so denam nkratafa a wɔayɛ a emu yɛ duru so.

4 × 8 Krataa a Wɔde Ma: Standard 1220 × 2440 mm HIPS nkrataa wɔ hɔ ma wɔn a wɔkyekyɛ, thermoformers, printers ne fabricators.

Custom Colors: Wobetumi aka kɔla a wɔhwehwɛ fi fitaa, tuntum, kɔla ne adwuma pɔtee bi ho asɛm.

Thermoforming Applications: Wobetumi apaw nneɛma ama vacuum forming ne thermoforming sɛnea thickness, ɔfã geometry ne forming bun.

Printing Applications: Wobetumi de HIPS ama ama signage, graphics ne display projects wɔ baabi a printability ne fabrication ho hia.

ESD HIPS: HSQY nso de ESD HIPS tuntum ma ma ɛlɛtrɔnik nneɛma a wɔde kyekyere nneɛma ho nnwuma a ɛhwehwɛ sɛ wɔakyerɛkyerɛ static-control adwumayɛ mu.

Custom Processing: Cutting, die cutting, CNC fabrication, printing ne afoforo processing ahwehwɛde ahorow betumi asusuw ho sɛnea mfonini ne nhwɛsode ahorow te.

Nneɛma a Wɔde Sisi Ano: HSQY nso de nneɛma ma        GPPS Nkratafa        a wɔde yɛ polystyrene a ɛda adi pefee ne        ABS Nkrataa        a ɛfa nnwuma a ɛhwehwɛ sɛ mfiridwuma ne adwumayɛ kari pɛ soronko.

Nsɛm a Ɛho Hia ma HIPS Krataa Quote

Abisadeɛ	Thermoforming, tintim, frigye liner, nneɛma a wɔde kyekyere nneɛma, nsɛnkyerɛnne, display, ɛlɛtrɔnik anaa dwumadie foforɔ
HIPS Grade a ɛwɔ hɔ	Standard, tintim, forming, ESD anaa nyansahyɛ a wɔhwehwɛ
Nneɛma a ɛyɛ den	Nea ɛhwehwɛ sɛ ɛyɛ kɛse na ɛyɛ nea wotumi gyina ano
Krataa no Kɛse	1220 × 2440 mm anaa amanne kwan so trɛw × tenten
Krataa a Wɔde Ma	Flat sheet, cut sheet anaa rollstock wɔ baabi a ɛwɔ
Ahosuo	Kɔla fitaa, tuntum anaa amanne kwan so kɔla
Surface / Nsɛm a Wɔatintim	Printing nhyehyɛe, surface finish, corona treatment anaa dyne ahwehwɛde wɔ baabi a ɛfata
Nneɛma a wɔde yɛ ɔhyew	Forming bun, nkuku nsusuwii, adeyɛ ne ahwehwɛde awie ɔfasu thickness
ESD Ahwehwɛde	Target surface resistance, sɔhwɛ kwan ne conditioning tebea wɔ baabi a ɛho hia
Mmara kwan so Ahwehwɛde	Aduan a wɔde di nkitaho, ogyaframa, ɛlɛtrɔnik mfiri anaa gyinapɛn foforo a ɛfata
Dodoɔ	Sɔhwɛ dodow, daa order dodow ne afe afe ahwehwɛde a wɔasusuw ho
Kɔbea	Ɔman a wɔrekɔ ne hyɛn gyinabea

HIPS Krataa a Wɔtaa bisa

Dɛn na HIPS gyina hɔ ma?

HIPS gyina hɔ ma High Impact Polystyrene. Ɛyɛ polystyrene a wɔayɛ no foforo a wɔde rɔba fa ayɛ no ma ɛyɛ den na ɛko tia nsunsuanso sɛ wɔde toto polystyrene a wɔde di dwuma wɔ ɔkwan a ɛkɔ akyiri so ho a.

Dɛn na wɔde HIPS krataa no di dwuma?

Wɔde HIPS nkrataa di dwuma ma trays a wɔayɛ no thermoformed, frigye liners, mfiri afã horow, mfonini ahorow a wɔatintim, nsɛnkyerɛnne, nneɛma a wɔde kyerɛ, nneɛma a wɔde kyekyere nneɛma, mfiridwuma mu nkataso ne ɛlɛtrɔnik nneɛma a wɔde kyekyere nneɛma titiriw.

So HIPS ne polystyrene a wɔtaa de di dwuma no yɛ pɛ?

Dabi HIPS yɛ polystyrene a wɔde rɔba ayɛ mu nsakrae a wɔayɛ sɛnea ɛbɛyɛ a ɛbɛyɛ den kɛse. Mpɛn pii no, GPPS yɛ katee na ɛyɛ nea ɛda adi nanso ɛyɛ mmerɛw nso.

Nsonsonoe bɛn na ɛda HIPS ne GPPS ntam?

Wɔtaa paw HIPS ma impact resistance, thermoforming ne printing. Wɔtaa paw GPPS ma dwumadie a ɛda adi na ɛhyerɛn wɔ baabi a ɛhia sɛ emu da hɔ kɛseɛ.

Nsonsonoe bɛn na ɛda HIPS ne ABS ntam?

Wɔtaa paw HIPS ma sikasɛm mu thermoforming ne printing applications, bere a wobetumi asusuw ABS bere a adwuma bi hwehwɛ sɛ ɛkari pɛ soronko wɔ engineering ahoɔden, toughness ne temperature adwumayɛ.

So wobetumi ayɛ HIPS krataa no thermoformed?

Aane. Thermoforming yɛ nneɛma atitiriw a wɔde di dwuma ma HIPS no mu biako. Wobetumi ayɛ no trays, liners, covers, housings ne nneɛma afoforo pii a ɛwɔ afã abiɛsa.

So wobetumi de vacuum ayɛ HIPS krataa?

Aane. Wobetumi de vacuum ayɛ HIPS grades a ɛfata. Ɛsɛ sɛ adeyɛ sɔhwɛ di nkuku nkyerɛase, ɔfasu a etwa to no mu duru, shrinkage ne finished-part adwumayɛ ho adanse.

So wotumi tintim HIPS krataa no?

Aane. Wɔde HIPS di dwuma kɛse ma nsɛnkyerɛnne ne mfonini ahorow a wɔatintim. Printing compatability gyina surface, ink, curing process ne sɛ ebia corona anaa surface treatment foforo ho hia.

Thickness HIPS krataa bɛn na HSQY de ma?

HSQY mprempren gyinapɛn HIPS nneɛma abusua no kata bɛyɛ 0.2–6 mm, a 0.5 mm, 1 mm ne 2 mm nkrataa a wɔada no adi ka ho.

So HSQY de 4 × 8 HIPS nkrataa ma?

Aane. HSQY de 1220 × 2440 mm HIPS nkrataa, a wɔtaa ka ho asɛm sɛ bɛyɛ 4 × 8 ft ma.

Dɛn ne HIPS krataa no trɛw a ɛsen biara?

Mprempren gyinapɛn HSQY HIPS nneɛma nkratafa kyerɛ ne tɛtrɛtɛ a ɛkɔ bɛyɛ 1600 mm. Si trɛw a ɛsen biara a ɛwɔ hɔ no so dua ma ne kɛse a wɔhwehwɛ ansa na woakra.

HIPS krataa no kɔla bɛn na ɛwɔ hɔ?

HSQY de HIPS nkrataa fitaa, tuntum, kɔla ne kɔla a wɔahyɛ da ayɛ ma.

So HSQY de ESD HIPS krataa no ma?

Aane. Mprempren HSQY de ESD HIPS ade tuntum bi a ne kɛse bɛyɛ 0.2–1.8 mm ma ma ɛlɛtrɔnik nneɛma a wɔde kyekyere nneɛma a wɔapaw.

So anti-static HIPS ne conductive HIPS yɛ ade koro?

Dabi, nneɛma a ɛko tia static, static-dissipative ne conductive kyerɛ anyinam ahoɔden-adwumayɛ ahorow ahorow. Kyerɛw ɔfasu no so ahoɔden a wɔhwehwɛ ne ɔkwan a wɔfa so sɔ hwɛ ansa na woapaw ade no.

So wobetumi ayɛ ESD HIPS thermoformed?

Aane. HSQY mprempren ESD HIPS ade no yɛ nea wɔayɛ ama thermoformed electronic trays ne component carriers. Ɛsɛ sɛ wɔsɔ anyinam ahoɔden adwumayɛ nso hwɛ bere a wɔayɛ no awie no.

So HIPS fata sɛ wɔde di dwuma wɔ abɔnten?

Standard HIPS nni ahoɔden a ɛko tia UV bere tenten. Ɛsɛ sɛ abɔnten so nnwuma kyerɛ UV-stabilized grade a ɛfata anaasɛ wɔsɔ plastic foforo a ɛko tia wim tebea hwɛ.

So HIPS tumi gyina ɔhyew ano?

HIPS ma adwumayɛ a mfaso wɔ so ma dan mu hyew ne ɔhyew a ɛkɔ fam dwumadi pii, nanso ɛnsɛ sɛ wɔfa no sɛ mfiridwuma mu plastic a ɛyɛ hyew kɛse. Kyerɛ ɔhyew a wɔhwehwɛ sɛ wode yɛ adwuma ansa na woapaw abasobɔde.

So HIPS fata ma frigye mu nneɛma?

HIPS yɛ nea wɔtaa susuw ho ma frigye mu liners ne mfiri afã horow esiane ne nkabom a ɛyɛ forming adwumayɛ, rigidity ne toughness. Ɛsɛ sɛ wɔda so ara di mfiri no ho nkyerɛkyerɛmu pɔtee no so dua.

So HIPS aduan yɛ nea asiane biara nni ho?

Aduan a wɔde di nkitaho a ɛfata no gyina grade pɔtee bi so. Mfa no sɛ mfiridwuma mu HIPS krataa biara fata ma aduan a wɔde di nkitaho. Si sɛnea wɔayɛ no pɛpɛɛpɛ ne mmara a wɔhwehwɛ wɔ baabi a wobɛkɔ-gua so no so dua ansa na woakra.

So wobetumi atwitwa HIPS krataa na wɔatutu?

Aane. Wobetumi atwitwa HIPS, CNC mfiri, atutu, die-cut na fabricated denam plastic-processing mfiri a ɛfata so.

So HSQY betumi ayɛ HIPS nkrataa akɛse sɛnea wɔpɛ?

Aane. Wobetumi aka Standard 1220 × 2440 mm nkratafa ne ne nsusuwii, ne kɛse, ne trɛw ne ne kɔla a wɔayɛ no sɛnea wɔpɛ ho asɛm sɛnea adwuma no ahwehwɛde te.

So HSQY betumi ne HIPS nhwɛsode a ɛwɔ hɔ dedaw no ahyia?

Wobetumi asusuw nhwɛsode bi a ɛwɔ hɔ dedaw no ho ne ne kɛse, ne kɔla, ne soro, ne yɛ, ne tintim ne ne adwumayɛ ho ahwehwɛde ahorow de ahu nkyerɛkyerɛmu a ɛfata.

So metumi abisa HIPS nhwɛsode ahorow?

Wobetumi aka nhwɛsode a ɛwɔ hɔ ho asɛm de asusuw ne kɛse, kɔla, ɔfasu, tintim, thermoforming ne dwumadie adwumayɛ ansa na wɔakra pii.

Nsɛm bɛn na ɛsɛ sɛ mede ma ma HIPS quotation?

Fa dwumadie, ne kɛseɛ, ne tɛtrɛtɛ ne ne tenten, kɔla, krataa anaa roll ahwehwɛdeɛ, tintim anaa forming process, ESD ahwehwɛdeɛ wɔ baabi a ɛfata, dodoɔ ne baabi a wɔrekɔ ma.

Bisa HIPS Krataa Quote

Worehwehwɛ HIPS krataa yɛfo a wotumi de ho to no so , high impact polystyrene supplier anaasɛ amanne kwan so nneɛma a wɔde yɛ thermoforming, vacuum forming, tintim, mfiri anaa electronic-packaging applications?

Send HSQY wo hia duru, krataa nsusuwii, kɔla, forming anaa tintim nhyehyɛe ne akontaabu atɔ dodow. Sɛ wopɛ ESD packaging a, fa surface resistance a wɔhwehwɛ ne sɔhwɛ kwan no ka ho sɛnea ɛbɛyɛ a wobetumi asusuw nneɛma a ɛfata no ho.