A4 UV Resistant Polycarbonate krataa a wɔde tintim nhoma

A4 UV Resistant Polycarbonate krataa a wɔde tintim nhoma

HSQY A4 UV resistant polycarbonate krataa so nsɛm yɛ nea wɔayɛ ama kaad tintim, polycarbonate overlay dwumadie, plastic kaad a wɔyɛ, laser engraving ne laser tintim.

Nneɛma no wɔ hɔ wɔ transparent, porcelain fitaa ne nufusu fitaa a wɔpaw, a ɛyɛ torotoro, frosted, glossy ne matte surfaces ma tintim ne card-manufacturing ahwehwɛde ahorow.

Adetɔfoɔ bɛtumi akyerɛ ne kɛseɛ, kɔla, ɔfasuo a wɔhwehwɛ, ɔkwan a wɔfa so tintim ne krataa so nsɛm a wɔhwehwɛ sɛdeɛ wɔn adwumayɛ kwan teɛ.

Bisa A4 Polycarbonate krataa Boɔ a wɔbɔ    Bisa Nhwɛsode

Nneɛma a Wɔyɛ no Ho Nsɛm

Wobetumi asusuw thicknesses a wɔayɛ no sɛnea wɔpɛ no ho sɛnea adetɔfo no tintim, kaad dan ne ne di ho ahwehwɛde ahorow te.

Fa Wo Nkyerɛkyerɛmu a Wohwehwɛ no Mena

A4 Polycarbonate krataa ma Kaad a Wɔtintim

A4-format polycarbonate nneɛma yɛ mmerɛw ma kaad ayɛfo, tintim nnwumakuw ne converters a wohia krataa so nsɛm -fed PC nneɛma ma tintim, laser dwumadie ne laminated kaad yɛ.

Ɛsɛ sɛ wɔpaw nneɛma a wɔhwehwɛ no sɛnea tintim nhyehyɛe, ɔfasu a wɔawie, krataa so nsɛm kɛse ne kaad a etwa to a wɔyɛ sen sɛ wɔbɛpaw krataa so nsɛm kɛse nkutoo.

Wɔ nneɛma a wɔkra ho no, ɛsɛ sɛ adetɔfo kyerɛ sɛ ebia wɔde nneɛma no bedi dwuma sɛ ade a wotumi tintim, ade a wɔde kata so anaasɛ kaad nhyehyɛe no fã foforo.

Nneɛma a Wobɛpaw sɛ Wotintim

Ɛsɛ sɛ wɔde mfiri ankasa a wɔde tintim nhoma, ink nhyehyɛe ne kaad-yɛ nhyehyɛe a wɔawie no hwɛ sɛnea tintim no hyia ansa na wɔayɛ no kɛse.

Surface Finish Nneɛma a Wɔpaw

Polycarbonate Nneɛma a Wɔde Yɛ Adwuma

Nnwuma a Wɔde Di Dwuma

Plastic Card Manufacturing: Ɛfata ma PC card nneɛma, overlay film ne laminated card-production applications.

Laser Engraving ne Laser Printing: Wɔakyerɛw nneɛma no ama laser engraving card ne laser printing card dwumadie.

Ɛlektrɔnik Mfiri: Wobetumi de polycarbonate ayɛ insulating plug-ins, coil frames, tube sockets ne battery shells wɔ dwumadie a ɛfata mu.

Mfiridwuma Nnwinnade: Wobetumi de polycarbonate adi dwuma ama gears, racks, bolts, levers, crankshafts, adan, nkataso ne frame ahorow a wɔapaw.

Aduruyɛ mu Nnwinnade: Aduruyɛ mu dwumadie hwehwɛ sɛ wɔde nneɛma a ɛfata ne mfiridwuma anaa mmara ho nkrataa a ɛfa dwumadie pɔtee bi ho.

Adansi: Wɔde polycarbonate nso di dwuma wɔ greenhouse ne adansi-panel dwumadie a ɛfata mu.

Polycarbonate Nneɛma a Wɔde Yɛ Mfonini

Nea Ɛsɛ sɛ Adetɔfo Si So dua Ansa na Wɔkra

Nya A4 Polycarbonate krataa Nsɛm a Wɔafa aka

Nsɛm a Wɔtaa Bisa

Dɛn na wɔde A4 polycarbonate krataa so nsɛm di dwuma?

Wobetumi de adi dwuma ama plastic card yɛ, polycarbonate overlay applications, laser engraving cards ne laser printing cards sɛnea wɔapaw nneɛma nkyerɛkyerɛmu.

Nneɛma a ɛyɛ den bɛn na ɛwɔ hɔ?

Nneɛma a ɛwɔ hɔ no yɛ 0.05mm, 0.06mm, 0.075mm, 0.10mm, 0.125mm, 0.175mm ne 0.25mm, a ne kɛse a wɔayɛ no sɛnea wɔpɛ nso wɔ hɔ.

Nneɛma bɛn na wɔde wie wɔ soro?

Surface options bi ne smooth, frosted, glossy ne matt.

Kɔla ahorow bɛn na ɛwɔ hɔ?

Kɔla ahorow a wɔakyerɛw no ne porcelain fitaa, nufusu fitaa ne nea ɛyɛ mmerɛw.

Akwan a wɔfa so tintim nhoma bɛn na wobetumi de adi dwuma?

Nneɛma a wɔakyerɛw a wɔde tintim nhoma no bi ne CMYK offset tintim, silk-screen tintim, UC ahobammɔ tintim ne laser tintim.

So saa ade yi fata ma laser engraving cards?

Laser engraving card applications ka ho wɔ afiri no ho nkyerɛkyerɛmu mu. Ɛsɛ sɛ adetɔfo de wɔn laser-processing ahwehwɛde ne kaad adansi a wɔawie ma ma wɔhwehwɛ mu.

So polycarbonate krataa so nsɛm no tumi gyina UV ano?

Nneɛma ho nkyerɛkyerɛmu no ka wim tebea ne UV a ɛko tia ne ultraviolet coextruded film a ɛwɔ krataa so nsɛm ani. Si UV nhyehyɛe a wɔhwehwɛ ma ade a woapaw no so dua ansa na woakra pii.

Dɛn ne hann a wɔde fa nnipa mu?

Wɔakyerɛw hann a wɔde fa kwan so no sɛ ɛkɔ 88% a ɛyɛ ahwehwɛ a ɛwɔ hɔ nyinaa no kɛse koro no ara. Adwumayɛ ankasa betumi ayɛ soronko sɛnea nneɛma no mu duru, kɔla ne nea wɔde awie no te.

Dɛn ne ogya no dodow?

Wɔakyerɛw Adesuakuw B1 din ama nsɛm no. Baabi a ɛho hia sɛ wodi ogya ho mmara so wɔ ɔkwan a ɛfata so no, si sɔhwɛ gyinapɛn a ɛfata ne nkrataa a ɛfa aduru no ho nkyerɛkyerɛmu pɔtee ho no so dua.

So polycarbonate ntumi mmubu koraa?

Polycarbonate ma ahoɔden a ɛko tia nsunsuanso kɛse, nanso ɛnsɛ sɛ wɔyɛ ade biara sɛ nea entumi mmu koraa wɔ adesoa, ɔtopae anaa ballistic tebea biara mu.

Ɔkwan bɛn so na ɛsɛ sɛ wɔhohoro polycarbonate krataa so nsɛm ho?

Fa ntama a ɛyɛ mmerɛw fa samina nsu a ɛyɛ hyew di dwuma na kwati nneɛma a wɔde tew nneɛma ho a ɛyɛ mmerɛw a ebetumi asɛe nea ɛwɔ soro no.

So wobetumi de nsɛm a wɔahyɛ da ayɛ ama?

Wobetumi aka sɛnea wɔayɛ no sɛnea wɔpɛ ho asɛm. Ɛsɛ sɛ adetɔfoɔ nso de krataa so nsɛm format, ɔfasuo, kɔla, tintim kwan, dodoɔ ne dwumadie a wɔhwehwɛ ma.

Nsɛm bɛn na ɛsɛ sɛ mede ma na ama wɔafa asɛm bi aka?

Fa krataa so nsɛm format a wɔhwehwɛ, ne kɛse, kɔla, ɔfasu awie, ɔkwan a wɔfa so tintim, kaad a wɔde di dwuma, UV ahwehwɛde, dodow ne baabi a wɔrekɔ ma.

Nneɛma a wɔde kyekyere nneɛma

Company Nnianim Asɛm

Changzhou Huisu Qinye Plastic Group Co., Ltd. yɛ adwuma titiriw wɔ PC board, PC boasetɔ board, PC diffusion board ne PC board dwumadie ne ne tɔn mu.

Nneɛma a wɔde yɛ adwuma no bi ne engraving, bending, precision cutting, punching, polishing, bonding, thermoforming, blister processing, UV flatbed printing ne screen printing. Wobetumi nso ayɛ mfonini ne nhwɛsode ahorow ho adwuma sɛnea adetɔfo ahwehwɛde te.

HSQY wɔ bɛboro mfeɛ 16 osuahu a ɛfa nneɛma a wɔde kɔ amannɔne ho wɔ nneɛma a wɔde ma mu PC krataa so nsɛm s ma adetɔfoɔ a wɔwɔ wiase nyinaa.

Di HSQY nkitaho na woanya Nhwɛsode ne Bo