Hetah hian i awm: In » Plastic Sheet hmanga siam a ni » PET Sheet a ni » CPET Sheet

CPET Sheet a ni

Ovenable Tray Thermoforming atana hman tur CPET Sheet Roll siamtu

HSQY hian CPET sheet roll leh cut sheet a supply a ni. ovenable ready-meal tray, airline meal tray, bakery container, frozen-food tray leh heat-resistant thermoformed packaging dangte siamtute tan Standard commercial option-ah hian black and white opaque sheet, custom widths, cut-sheet dimension leh application-specific thickness te a awm a ni.

CPET hi nucleated PET material a ni a, thermoforming leh heat setting-a controlled crystallinity siam chhuah theihna tura engineer a ni. Chuta chhuak formed tray chuan standard amorphous PET packaging aiin heat resistance leh dimensional stability nasa zawk a pe thei a, chu chu sheet formulation, heating profile, mold temperature, cooling cycle leh finished-part design te dik taka inmil a nih chuan a ni.

Chhanna awlsam: CPET sheet hi freezer-to-oven leh dual-ovenable food tray thermoform nana hman thin semi-finished material a ni. Buyers te chuan finished tray mamawh chu an tarlang tur a ni—sheet thickness chauh ni lovin—a chhan chu oven performance hi grade kimchang, crystallization process, wall distribution leh formed-part validation ah a innghat a ni.

Tuna HSQY CPET Sheet Products hman mek te

Tuna HSQY category-ah hian product page inzawm pathum a awm a. Anni hian black CPET sheet, heat-resistant CPET sheet leh thermoforming atana CPET film te an address a ni. Products te hi application-ah an overlap a, chuvangin buyers te chuan product title chauh hmanga thlan ai chuan grade leh specification dik tak chu an confirm tur a ni.

Tuna Product	tihchhuah tawh Positioning	Published Range	Recommended Buyer Check
Thermoplastic thil siamna atana hman tur CPET Sheet dum	Microwaveable lunch box, aviation tray leh thermoformed packaging atan CPET sheet dum emaw custom emaw a awm thei.	Thickness information chu 0.1–3 mm leh 0.12–3 mm angin a lang a; roll zau zawng 80–1300 mm; cut sheets a awm bawk.	Grade pawm tawh, thickness range tak tak, rawng, roll dimension, density leh finished-tray temperature target te chu nemnghet rawh.
Heat Resistant CPET Sheet hmanga siam a ni	Food tray, cup, clamshell, blisters leh a kaihhnawih heat-resistant packaging atana hman tur thermoformable sheet.	Sheet size tihchhuah tawhte chu 700 × 1000, 915 × 1830, 1000 × 2000 leh 1220 × 2440 mm te a ni.	Application chu ovenable food packaging, microwave-only packaging emaw thermoformed product dang emaw a nih leh nih loh finfiah rawh.
Heat Resistant CPET Film hmanga siam a ni	Food packaging leh aviation meal tray-a hman tur CPET material dum emaw var emaw opaque.	Published thickness 0.1–3 mm leh roll zau zawng 80–1300 mm.	Gauge dil chu roll-fed sheet emaw cut sheet emaw anga supply a nih leh nih loh leh thermoforming line nen a inmil em tih finfiah rawh.

CPET Sheet-a thil chiang tak takte

A hnuaia table hian HSQY product page hrang hranga specification tihchhuah mekte chu a khaikhawm a ni. Field thenkhat chu page header leh detailed description inkara a inmil loh avangin final sales contract hian approved technical data sheet a reference tur a ni.

Specification	Published HSQY Information	lei dan tur kaihhruaina
Bungrua	PET / CPET siam danglam emaw crystallize theih emaw a ni.	Resin, nucleating system, pigment leh recycled-content declaration dik tak dil rawh.
Thickness a ni	Table chipchiar takah 0.1–3 mm anga tihchhuah a ni a, page header thenkhatah 0.12–3 mm anga tihchhuah a ni bawk.	Nominal gauge leh tolerance te chu tarlang rawh; siam theih range tak tak chu nemnghet rawh.
Roll zau zawng	80–1300 mm vel, a duh angin a siam theih.	Web zau zawng, edge trim, tolerance leh winding direction hman theih tur pe.
Standard Cut Sheet te a awm bawk	700 × 1000, 915 × 1830, 1000 × 2000 leh 1220 × 2440 mm a ni.	Sheet flatness, stack quantity, interleaf emaw protective-film mamawhna chu nemnghet rawh.
Sakhal zawng	Tuna product page-ah chuan 1.35 g/cm3 vel a ni.	Roll sei zawng leh rit zawng chhiar nan approved grade density hmang ang che.
A rawng hrang hrang	Black leh white hi CPET rawng lian ber a ni a; custom opaque colors te pawh evaluate theih a ni.	Transparent option hian crystallization leh oven performance inang a nei tih ngaihtuah suh.
Pawnlang	Glossy, matte emaw frosted emaw options te chu reference a ni.	Eng surface nge mold, food leh lidding-film seal nena inzawm tih finfiah rawh.
Supply Format a ni	Roll emaw, cut sheet emaw a ni.	Roll-fed siam nan hian core, diameter, weight, splice leh tension specification te a ngai a ni.
MOQ tihchhuah a ni	Tuna page-ah hian 1000 kg leh 2000 kg reference pahnih a awm a.	MOQ hi grade, thickness, color, width leh packing format hmangin confirm rawh.
Lead Time tihchhuah a ni	Product page chipchiar tak pakhata quantities thlan bikte tan ni 10–14 vel.	Sample pawmpui hnuah, raw-material awm leh awm loh leh production scheduling hnuah nemnghet rawh.
Sample hrang hrang a awm	A4 sample te hi tunlai product page ah hian reference a ni.	Production-line trial-ah hian roll sei tawk a ngai a, A4 hand sample chauh ni lovin.

CPET Sheet hi eng nge ni?

CPET tih hi crystallized emaw crystallized emaw polyethylene terephthalate tihna a ni. Thermoforming application atan chuan material hi nucleating leh processing additives hmanga siam a ni tlangpui a, chu chuan controlled heating leh molding laiin PET chu rang takin a crystallize thei a ni.

Sheet hi ovenable tray hnuhnung ber nen a inang lo. Finished performance chu sheet chu a tihlum leh dan, a siam dan, a crystallized dan emaw heat-set a nih dan leh a lum danah a innghat a ni. Control tha lo process chuan raw sheet specification dik tak a nih pawhin wall thickness inang lo, crystallinity hniam, distortion emaw brittle area emaw a siam thei a ni.

CPET Sheet hi Ovenable Food Tray a nih dan

Material siam dan: PET resin, nucleating additives, color leh approved recycled content te chu grade angin an blend thin.
Drying leh extrusion: Polymer chu a hmin hmain moisture control a ni a, flat die hmanga extrude a ni.
Sheet calibration: Roll-stack cooling hian winding emaw cutting emaw hmain thickness, surface leh flatness a control thin.
Sheet reheating: Thermoformer hian web chu gauge leh cavity depth nena inmil forming condition-ah a ti lum a.
Forming: Vacuum, pressure emaw plug-assist hmanga siam hian mold chungah material a sem darh thin.
Crystallization leh heat setting: Controlled mold temperature leh dwell time hian heat resistance atana mamawh crystallinity a siam chhuak thin.
Cooling leh release: Tray siam zawh tawh chu a pianzia vawng reng thei tur leh release reng tur chuan a lum tawk tur a ni.
Trimming leh inspection: Tray te hi trim, stack leh dimension, wall distribution leh performance te enfiah thin a ni.

Crystallinity A Pawimawh Chhan

Control ha lo a nih chuan Process Variable Effect	Finished Tray	Risk -a
Nucleation hmanga siam a ni	Crystallization chak zawk leh uniform zawk a tichak.	Cycle slow, crystallinity inang lo emaw, heat resistance inmil lo emaw.
Sheet Temperature a ni	Material chu a inzawm thei a, mold nen a inmil thei bawk.	Web sag, incomplete forming, thinning lutuk emaw tearing emaw.
Mold Temperature a ni	Crystallization leh dimensional stabilization a support bawk.	Heat resistance hniam, sticking emaw cycle time tam lutuk emaw.
Dwell Hun a ni	Forming leh crystallization atan hun a pe.	Under-crystallized emaw over-processed emaw a awm.
Cooling a ni	Ejection leh stacking hmain dimensions a lock thin.	Warping, flange distortion emaw blocking emaw a awm thei.
Wall-a sem chhuah dan	Corner chakna, base rigidity leh oven performance te a tichiang.	Corner te tak te, cracking, deformation emaw seal failure emaw a awm thei.

Service Temperature: Engvangin nge 177°C leh 220°C te hi an lo lang ve ve

Tuna HSQY CPET sheet product page-ah hian finished-use performance 177°C vel thlenga tihchhuah a ni ber a, market-a sumdawnna atana hman tur CPET system dangte erawh chu 220°C vel thlenga hman tur atana siam a ni thung. Heng chhiarpui te hi universal claim pakhatah dah khawm tur a ni lo.

Temperature sang ber pawm tawh chu tray grade, wall thickness, crystallinity, food load, oven type leh maximum exposure time tihfel tawh nen a inzawm tur a ni. Sheet datasheet chauh hian ei tur package siam zawh tawhte tana safe heating instruction chu a din thei lo.

Temperature Statement	Hrilhfiahna dik tak
-40°C Cold-Side tih hi a ni	Frozen ready-meal application atana target tlanglawn tak, cold-impact leh thermal-shock validation hnuaia awm.
177°C vel thleng a ni	Tuna HSQY CPET sheet product page-a high-temperature value tihchhuah ber chu.
220°C vel thleng a ni	CPET formulation thlan bik leh tray zawh tawh dik taka crystallized tan pawh a awm thei; grade-specific confirmation a ngai a ni.
Microwave hmanga hman theih a ni	Tray siam zawh tawh leh ei tur system-ah a innghat a; oil leh sugar hian local hot spot a siam thei a ni.
Conventional Oven nena inmil theihna	Time-temperature profile dik tak leh exposed heating elements atanga clearance neih a ngai.

CPET Sheet hmanga dilna te

Frozen ready-meal tray-ah chuan a awm a
Supermarket-a ei tur tray pahnih-ovenable
Airline leh rel kawng chaw ei tur tray te
Bakery leh dessert tray te a awm bawk
Pasta, lasagna leh casserole dahna tur a awm bawk
Institutional leh healthcare-a chaw ei tur packaging siam a ni
Chaw pekna leh central-kitchen tray-ah te dah a ni
Compartment pakhat, pahnih leh pathum awmna food tray
Custom thermoformed hmanga siam a ni a, heat-resistant packaging a ni

Medical, automotive leh industrial application te chu tuna HSQY product page thenkhatah a lang a, mahse heng hmanna atan hian independent material, regulatory leh process validation a ngai a ni. Food-packaging grade chu automatic-in medical sterilization emaw engineering grade emaw anga promote tur a ni lo.

CPET Sheet leh APET, PETG, PP leh HIPS Sheet te nen an inhmachhawn dawn a ni

Material	Clarity	Heat Performance	Typical Packaging hman dan	Key tihkhawtlai
CPET Sheet a ni	A tlangpuiin opaque a ni a, black, white emaw custom color emaw a ni.	Controlled crystallization hnua temperature sang zawka siam zawh tawh tray atana siam a ni.	Freezer atanga oven thlenga ei tur buatsaih leh airline tray te.	Controlled thermoforming leh heat setting a mamawh.
APET Sheet a ni	A chiang hle.	A bik takin cold emaw ambient packaging emaw a ni a; oven pangngaia hman tur atana ruahman a ni lo.	Clamshells, tray, khuhna leh ei tur pack thianghlim siam chhuah.	Ovenable tray tan chuan heat resistance tling lo.
PETG Sheet a ni	Clarity sang tak leh forming definition tha tak a ni.	Temperature hniam zawka forming tha zawk, mahse conventional oven performance hi grade-specific a ni.	Display packaging, medical packaging leh component chiang tak tak siam.	Ovenable CPET aiah direct substitute a ni lo.
PP Sheet a ni	Translucent atanga opaque thlengin a awm.	Microwave leh hot-fill hmanna atan a tha tlangpui; oven hman a tlem a, grade bik a ni.	Microwave tray, cup leh ei tur dahna te.	A tlangpuiin CPET aiin conventional-oven capability a hniam zawk.
HIPS Sheet a ni	Opaque a ni.	Chilled leh ambient pack tam takah a tha; heat range hi grade a zirin a ni.	Dairy cup, a khuhna, insert leh general tray te a awm bawk.	Freezer atanga conventional-oven hmanna atana ruahman a ni lo.

Black vs White CPET Sheet a ni

Selection Factor	CPET Sheet dum	CPET Sheet dum
Chaw pek dan tur	Chaw rawng hring leh premium ready meals nen a danglamna nasa tak.	A hmel thianghlim leh dark sauce emaw baked products emaw nena inthlauhna tha tak.
Radiant Heat Absorption hmanga thil tih theih a ni	Heating condition thenkhatah chuan radiant energy tam zawk a absorb thei.	Radiant heating leh visual browning te hi a chhanna a danglam thei.
Sorting leh Recycling tih a ni	Dark pigment hian optical sorting system thenkhat a nghawng thei.	Acceptance chu local PET tray sorting leh recycling infrastructure-ah a innghat a ni.
Branding tih a ni	Retail ready meals leh airline tray-ah te hman tlanglawn tak a ni.	Bakery, healthcare leh institutional presentation atan hman tlanglawn tak a ni.
Validation a ni	Heating tak tak, color consistency leh regulatory documentation te khaikhin rawh.	Staining, color stability, heating leh regulatory documentation te khaikhin rawh.

CPET leh CPET-Light langtlang tak a ni

Standard ovenable CPET food tray hi a tlangpuiin opaque a ni a, a chhan chu crystallinity hian light a ti darh thin. Specialized transparent emaw lightly crystallized PET system te hi lower-temperature hot-fill emaw application dang atan engineer theih a ni a, mahse opaque CPET ang oven performance inang pe thei tura ngaih tur a ni lo.

Product visibility mamawhna hmunah chuan target chu clear lid, transparent APET tray, PETG component emaw specialized transparent heat-resistant PET grade emaw a nih leh nih loh sawifiah rawh. Supplier chuan temperature dik tak leh forming window chu a nemnghet tur a ni.

CPET Sheet Thickness thlan dan tur

Sheet thickness chu tray load zawh tawh, cavity depth, draw ratio, flange width, oven mamawh, stack load leh target tray weight atanga thlan tur a ni. Sheet thick zawk hian rigidity a ti tha thei a, mahse material cost, heating time leh cooling time a tisang thei bawk.

Selection Input	Engvangin Nge A Pawimawh
Tray Kephah hnuhma	Tray lian zawkah chuan a tlangpuiin stiffness leh controlled base support a mamawh zawk.
Draw Depth a ni	Deep cavities hian sheet chu a tizau a, hmun pawimawh takah chuan wall thickness a ti tlem bawk.
Corner Radius a ni	Sharp corners hian thinning leh stress concentration a tipung a.
Compartment hrang hranga awm dan tur	Divider leh junction te hian forming laiin material flow a thlak danglam thin.
Chaw rit zawng	Chaw rit ei hian base, rim leh stack load a tipung.
Heating Cycle a ni	Hun rei zawk emaw, lum zawk emaw hman chuan finished-wall robustness nasa zawk a mamawh thei.
Sealing Flange a ni	Lidding-film sealing atan chuan flange chu a flat leh dimensionally stable a ni tur a ni.
Line Speed a ni	Material thicker zawk hian heating leh cooling capacity tam zawk a mamawh thei.

Thermoforming Lines te tan Roll Specification a awm a

Nominal thickness leh thickness tolerance a ni
Roll zau zawng leh edge-trim allowance hman theih
Roll rit zawng leh roll diameter sang ber
Core material, chhung lam diameter leh core sei zawng
Winding lam hawi leh ei tur nena inzawmna lam
Surface finish leh corona emaw a tulna hmunah treatment dang emaw
Splice awm zat leh awmna hmun tam ber
Roll hardness, telescoping leh edge alignment limit te a awm bawk
Batch hriat theihna leh traceability
Protective wrapping, pallet layout leh moisture laka invenna a ni

Thermoforming Trial chungchanga hriat tur pawimawh

CPET sheet trial tangkai tak atan chuan visual sample tlemte aia tam a ngai a ni. HSQY hian sheet grade leh trial quantity dik tak recommend turin thermoforming-machine leh mold data mamawh chu a dawng tur a ni.

Thermoforming machine brand leh model te pawh a awm bawk
Roll-fed emaw cut-sheet emaw hmanga siam dan
Heater chi hrang hrang leh heating zone awm thei te
Vacuum, pressure leh plug-assist theihna a awm bawk
Mold material leh mold-heating system te pawh a awm bawk
Cavity dimensions, a thuk zawng leh corner radii te
Target cycle hun leh siam chhuah chakna
Trim dan leh stacking system te a awm bawk
Tray rit leh wall-thickness target siam zawh tawh
Microwave, oven, freezing leh sealing performance mamawh a ni

Thermoforming lama harsatna awm fo leh siamthatna tur

Buaina	awm thei	Checks rawtna
Web Sag tam lutuk	Sheet a lum lutuk, melt strength hniam emaw temperature zoning tha lo emaw a ni.	Heater zone, support leh heating time te siamrem rawh.
Forming tling lo	Sheet a lum lutuk, vacuum emaw pressure emaw tling lo, emaw venting block lutuk.	Controlled heating tihpun la, vacuum holes te enfiah bawk ang che.
Corner te tak te te	Draw ratio sang, sharp radii emaw plug-assist timing tha lo emaw a ni thei.	Mould radii, plug design leh material distribution te siam danglam.
Tray Sticks a awm a	Mould temperature, surface emaw release timing dik lo.	Mold coating, crystallization dwell leh cooling te chu enfiah leh rawh.
Heat Resistance a hniam hle	Crystallization tling lo emaw grade dik lo emaw.	Nucleating formulation, mold temperature leh dwell time te enfiah thin ang che.
Flange Warpage a ni	Heating, cooling emaw trim stress inang lo.	Temperature zone te balance la, trim hmain cooling verify rawh.
Brittle Tray chu Freezing hnuah a awm	Impact balance tha lo, bang te tak te emaw crystallinity tam lutuk emaw.	Grade, wall distribution leh cold-impact testing te enfiah leh a ni.
Uneven Color emaw Gloss emaw a awm	Pigment dispersion tha lo, temperature danglamna emaw roll-surface inconsistency emaw.	Raw material, extrusion condition leh roll-stack settings te enfiah thin ang che.

CPET Tray siam zawh tawhte Lidding Film leh Sealability

CPET sheet ngei hian final seal performance a tichiang lo. Thermoformed flange, tray chunglam, lidding film leh sealing machine te chu a inmil tur a ni. HSQY pawhin a supply bawk CPET tray-te tana sealing film siam a ni.

Flange flat leh bawlhhlawh lo finished chu vawng reng rawh.
Easy-peel emaw weld-seal emaw tih dan tur sawifiah rawh.
Lidding-film sealant layer chu nemnghet rawh.
Temperature, pressure leh dwell time atan sealing window siam rawh.
Freeze leh reheating hnuah peel force leh package integrity test rawh.
Film chu a awm reng em, a vents em, a pierced em tih emaw, a chhuah tawh em tih emaw chu a lum hmain finfiah hmasa phawt ang che.
Printed film, anti-fog leh barrier mamawh te chu a tulna hmunah validate.

Barrier leh MAP mamawh te

Standard CPET hi automatic-in high-gas-barrier sheet emaw, fixed shelf-life extension guarantee thei material emaw anga sawi tur a ni lo. MAP performance hi tray structure, wall thickness, optional barrier layer, lidding film, seal integrity, gas mixture, food hygiene leh cold chain ah a innghat a ni.

Barrier sang tak mamawhna hmunah chuan target OTR, WVTR, test temperature leh relative humidity, forming depth, post-forming barrier mamawh leh shelf-life study tum chu tarlang rawh. Flat sheet-a barrier tehna hian thermoformed tray siam zawh tawha testing a thlak lo.

Food-Contact zawm dan tur

Food-contact compliance chu CPET resin dik tak, nucleating additives, pigments, recycled content leh intended time-temperature conditions te tan a dik tih finfiah a ngai a ni. FDA, EU, SGS emaw ISO statement tlangpui chuan test huam chin a tarlang lo va, grade tin tan compliance a siam lo bawk.

Destination market leh food-contact regulation hman tur a awm bawk
Chaw chi hrang hrang, thau, acidic emaw alcoholic foods te pawh a tel
Contact temperature leh a hun chhung sang ber
Chilled, frozen, microwave leh oven condition ah te dah a ni
Direct food-contact lam chu sheet ah a awm
Pigment leh additive chungchang puan chhuahna
Recycled-content source leh functional-barrier strategy a awm theihna hmunah te
Migration test emaw, zawm a nih thu puan emaw
Batch traceability leh change-control mamawh a ni

Recycled Content leh Recycle theih dan

CPET hi PET-based a ni a, mahse recyclability tak tak chu packaging design leh local collection, sorting leh reprocessing system-ah a innghat a ni. Dark color, label, adhesive, lidding film, barrier layer leh food residue te hian PET thermoform recycling nena inmilna a nghawng thei a ni.

Recycled PET hi formulation, process leh food-contact rules-in a phalna hmunah te dah tel theih a ni. Buyers te chuan grade dik tak atan documented recycled-content percentage, source, certification scope leh food-contact compliance te dil tur a ni.

'fully recyclable everywhere.' tih ang chi universal claims pumpelh rawh.

CPET Sheet Roll hrang hrangte Quality Control

Quality Check	tumna
Thil hman tur hriat chian	PET resin, additives leh pigment system pawm tawh chu a nemnghet.
Moisture Control a ni	Extrusion laiin hydrolytic degradation leh viscosity loss a ti tlem.
Thickness Profile a ni	Consistency leh finished-wall distribution siamna controls.
Width leh Edge Quality a ni	Tracking lama harsatna leh edge tears a veng thei.
Roll rit zawng leh a sei zawng	Production planning leh cost control te a pui thin.
Surface A lan dan	Contamination, scratch, gel, pit leh gloss variation te a enfiah thin.
Color Consistency a ni	Tray hmel leh heat-response consistency a vawng reng thin.
Density leh Intrinsic-Viscosity Control te a ni	A tarlanna hmunah batch stability leh processing behavior a support.
Thermoforming hmanga enchhin a ni	Sag, forming definition, release leh cycle time te a validate.
Finished-Tray hmanga test a ni	Heat resistance, cold impact, stacking, sealability leh food-contact performance te a nemnghet.

Packing leh Export Logistics te a ni

HSQY product page-ah hian reference roll, cut sheet, A4 sample, bagged sheet pack, pallet leh container-scale supply te a awm a. Final packing hi sheet format leh customer handling equipment vel engineer-a siam tur a ni.

Roll emaw cut-sheet emaw hmanga supply format a ni
Roll rit zawng, diameter leh core specification te a ni
Bag emaw pallet emaw khatah sheet a awm
Moisture-resistant chhung lam wrapping
Edge leh corner venhimna a ni
Pallet dimension leh stack san zawng sang ber
Container loading zat leh a rit zawng sem dan
Batch label, barcode leh shipping mark te a awm bawk
Storage temperature, humidity leh stacking dan tur te

CPET Sheet Samples te endik dan tur

Technical data enfiah: Grade, thickness, width, color leh intended application te chu nemnghet rawh.
Sheet enfiah rawh: A chunglam, a rawng, a flatness, edge quality leh winding te enfiah rawh.
Thermoformer tak tak chu run rawh: Mold, heater, vacuum emaw pressure emaw hman tur leh cycle speed hman tum.
Tray siam tawh chu teh rawh: A dimension, a rih zawng leh a wall distribution te enfiah rawh.
Crystallization endik: Process hian dimensional leh heat performance mamawh a siam tih finfiah rawh.
Test freezing: Frozen impact leh thermal shock te pawh a tel.
Test heating: Food load hnuhnung ber, microwave emaw oven cycle pangngai emaw hmang rawh.
Test sealing: Flange siam tawh chu lidding film thlan hmangin validate rawh.
Golden sample pawm: Sample chu final sheet leh process specification nen link rawh.

Engvangin nge CPET Sheet atan HSQY hi kan thlan?

CPET sheet roll leh cut-sheet format hrang hrang a awm bawk
Published thickness coverage chu 0.1–3 mm vel a ni
Published roll-width coverage chu 80–1300 mm vel a ni
Black, white leh custom opaque-color hmanga siam theihna a ni
Standard leh custom cut-sheet dimension a ni
Ovenable ready-meal leh airline-tray hmanna tur support
Sample supply leh thermoforming hman dan thlirletna
A kaihhnawih CPET tray leh lidding-film siam theihna
Custom packing leh international bulk supply te pawh a awm bawk

A kaihhnawih category hrang hrangte chu PET sheet a ni, APET sheet a ni, PETG sheet a ni, PET thermoforming sheet leh CPET tray siam zawh tawh.

CPET Sheet Sample leh Pricing dil tur a ni

Grade recommendation leh quotation dik tak dawng tur chuan hetiang hian pe rawh:

Tray drawing emaw physical sample emaw siam zawh tawh
Sheet thickness leh tolerance mamawh
Roll zau zawng emaw cut-sheet dimension emaw
Roll rit zawng, diameter leh core size te
Black, white emaw custom color emaw a ni thei
Surface finish leh food-contact lam a ni
Thermoforming machine leh mold chungchang hriat tur
Target tray weight, draw depth leh cycle speed te
Freezing, microwave leh oven mamawh a ni
Lidding-film leh sealing mamawh a ni
Thla tin quantity leh kum tin forecast
Destination market leh compliance documentation te a awm bawk
Packing, Incoterms leh delivery schedule te a awm bawk

CPET Sheet duh tan HSQY zawhfiah theih a ni

FAQ CPET Sheet chungchang

CPET sheet tih hi eng nge ni?

CPET sheet hi nucleated PET thermoforming material a ni a, heat-resistant leh ovenable tray siamna atana hman thin a ni.

CPET sheet leh PET sheet pangngai hi eng nge an danglamna?

CPET hi controlled crystallinity leh heat resistance sang zawk siamna atana siam a ni a, APET pangngai erawh chu clear cold emaw ambient packaging atan hman a ni ber thung.

CPET sheet hi thermoforming hmain a crystallized kim tawh em?

A ni hauh lo. Thermoforming grade tam tak chu controlled forming leh heat setting-a crystallize rang thei tura siam a ni.

HSQY hian CPET sheet atan eng thickness nge a publish?

Tuna product page-ah hian 0.1–3 mm vel a lang a, header thenkhatah chuan 0.12–3 mm vel a lang thung. Grade dik tak leh tolerance dik tak chu nemnghet rawh.

Eng roll width nge awm?

Tuna HSQY page-ah hian roll width 80–1300 mm vel tihchhuah a ni a, custom widths chu production review a ngai a ni.

Eng cut-sheet size nge awm?

Published size-ah hian 700 × 1000, 915 × 1830, 1000 × 2000 leh 1220 × 2440 mm te a awm a, custom format pawh a awm bawk.

Eng rawng nge awm?

Black leh white hi opaque CPET rawng ber a ni. Custom color te pawh evaluate theih a ni.

Transparent CPET a awm em?

Special transparent heat-resistant PET grades a awm a, mahse standard opaque CPET angin temperature performance inang an pe lo mai thei.

CPET sheet hian eng temperature nge a tuar theih?

Tuna HSQY product page-ah hian finished-use performance 177°C vel thlenga tihchhuah a ni ber. CPET system thlan bikte hian temperature sang zawk an thleng thei a, mahse hei hi grade leh finished-tray testing hmanga finfiah a ngai a ni.

Freezer-to-oven tray atan CPET sheet hi hman theih a ni em?

Ni e, grade leh thermoforming process-in freezing leh heating cycle tum atana validated tray siam zawh tawh a siam chhuah hunah.

Microwave tray atan CPET sheet hi hman theih a ni em?

Ni e, qualified finished tray tan chuan. Chaw ei tur, tray wall sem dan leh heating instruction te chu test dun tur a ni.

CPET sheet hi grill hnuaiah emaw open flame hnuaiah emaw hman theih a ni em?

No. CPET tray siam zawh tawhte chu open flames, exposed broiler elements emaw uncontrolled radiant heat emaw a tawk tur a ni lo.

CPET sheet atang hian eng thil nge siam?

Thil siam chhuah tlangpui chu ready-meal tray, airline meal tray, bakery tray leh compartment pakhat, pahnih emaw pathum awmna ovenable food tray te a ni.

CPET sheet hi vacuum hmanga siam theih a ni em?

Awle. Line leh product a zirin vacuum siam, pressure siam emaw plug-assist siam emaw pawh a ni thei.

Engvangin nge mold temperature hi a pawimawh?

Mould temperature hian crystallization, dimensional stability, release leh cycle time control nan a pui a ni.

Engvangin nge CPET tray te hi a brittle thin?

A chhan awm thei chu grade thlan ha lo, bang te tak te, crystallinity tam lutuk, cold impact emaw forming condition dik lo emaw a ni.

CPET sheet hi direct-a seal theih a ni em?

Sheet hi a tlangpuiin thermoformed hmasa ber a ni. Chumi hnuah chuan tray flange siam zawh tawh chu lidding film inmil hmangin an seal leh a.

MAP tray atan CPET sheet hi hman theih a ni em?

MAP system-ah a tel thei a, mahse barrier leh shelf-life performance chu tray structure, film, seal, gas leh cold chain-ah a innghat a ni.

CPET sheet hi ei tur grade a ni em?

Food-contact suitability hi resin dik tak, additives, pigments, recycled content leh intended time-temperature conditions ah a innghat a ni.

Recycled PET hi CPET sheet-ah hman theih a ni em?

Formulation, process leh food-contact regulation-in a phalna hmunah hman theih a ni. Product-specific documentation dil rawh.

CPET sheet hi recycle theih a ni em?

Local system-in CPET thermoform package kimchang an pawmna hmunah chuan recyclable a ni thei. Color, film, label leh additives te hian compatibility a nghawng a ni.

MOQ chu eng nge ni?

Tuna HSQY product page-ah hian 1000 kg leh 2000 kg reference pahnih a awm a. MOQ hi grade, thickness, width, color leh packing hmangin nemnghet rawh.

Free sample ka dil thei ang em?

Tuna product page-ah hian A4 samples reference a awm. Production thermoforming trial-ah chuan a tlangpuiin roll sample lian zawk a ngai thin.

Quotation siam nan eng information nge mamawh?

Thickness, width, roll or sheet format, rawng, thermoforming hmanrua, mold, temperature target, quantity, packing leh compliance mamawh te pe rawh.

Product Category hrang hrang a awm