HSQY 16mm leh 18mm co-extruded PVC foam board hi kitchen cabinet, bathroom cabinet, furniture panel, shelf leh fabricated interior component dangte atana siam a ni a, foam core rit lo tak a mamawh a, surface layer smooth, denser PVC a ngai a ni.
16mm leh 18mm thickness hian cabinet leh furniture siamna atan panel depth nasa tak a pe a ni. Co-extruded construction hi a pawimawh hle a, surface finish, machining quality, hardware installation, painting emaw decorative lamination emaw lei tur pawimawh tak tak a nih chuan.
Cabinet siamna atan chuan lei duhtute chuan bulk production hmain thickness, density, sheet hmanga thil siam a ni size, co-extruded surface mamawh, cabinet component, screw leh hinge position, unsupported span, CNC processing leh finishing mamawh te an tarlang tur a ni.
Co-Extruded PVC Foam Board hmanga siam a ni Video a ni
16mm & 18mm PVC Cabinet Board Hmanlai thil hlui leh hlui lo te
![Cabinet atan 16mm leh 18mm co-extruded PVC foam board a awm a]( "16mm 18mm Co-Extruded PVC Foam Board")
16mm & 18mm Co-Extruded hmanga tihchhuah a ni PVC Foam Board hmanga siam a ni
![PVC co-extruded foam board chu kitchen leh bathroom cabinet atan hman a ni]( "PVC Foam Board for Cabinets")
PVC Cabinet dilna atana Co-Extruded Board
16mm & 18mm Co-Extruded PVC Board-a thil awm dan tur
He page hian 16mm leh 18mm cabinet-board version te a tarlang a ni. HSQY PVC foam-board chhungkaw zau zawkah hian thickness, size leh density dang a awm bawk. Co-extruded grade dik tak order tur chu final specifications chu confirm tur a ni.
| Property |
chungchang sawifiahna |
| Product Hming |
Cabinet atan 16mm & 18mm Co-Extruded PVC Foam Board hmanga siam a ni a awm bawk |
| Bungrua |
PVC |
| Thickness hrang hrang langsar tak tak |
16mm, 18mm a ni |
| Series Thickness Range a ni |
1–35mm inkar a ni |
| Density Range a ni |
0.35–1.0g/cm⊃3 a ni a; co-extruded cabinet grade thlan tawhte tan density tak tak a nemnghet |
| Standard Sheet Size a ni |
1220 × 2440mm / 4×8 ft vel a ni |
| Listed Size dangte pawh a awm |
915 × 1830mm, 1560 × 3050mm, 2050 × 3050mm a ni |
| A rawng hrang hrang |
White, Red, Yellow, Blue, Green, Black leh a dangte pawh a awm thei |
| Pawnlang |
Glossy, Matte a ni |
| Dilna hmasa ber |
Kitchen Cabinet, Bathroom Cabinet, Furniture Panel, Shelf leh Interior Component te a awm bawk |
| Processing tih a ni |
Saw Cutting, CNC Routing, Drilling, Grooving, Screwing, Nailing, Riveting leh Bonding te a awm bawk |
| MOQ |
3 Tons a ni |
| Quality Control a ni |
Raw Material thlan dan, Process Monitoring leh Piece-by-Piece Checking te tarlan a ni |
| Packaging a awm bawk |
Plastic Bag, Carton, Pallet leh Kraft Paper te a awm bawk |
| Pe |
T/T, L/C, D/P, Western Union-ah te an awm a |
| Listed Lead Time a ni |
Deposit hnu Ni 15–20 vel |
| Sample hrang hrang a awm |
Free Samples te chu a awm dan anga listed a ni a; Express Freight Arrangement chu tihdik a ni ang |
Co-Extruded PVC Foam Board hmanga siam a ni hi eng nge ni ?
Co-extruded PVC foam board hi multi-layer expanded PVC panel a ni a, extrusion laiin denseer PVC surface layer te chu lighter foamed PVC core nen siam dun a ni.
He construction hi production zawhah decorative film dah belh nen a danglam a ni. Denser outer surface hian cabinet siamna, machining, painting, printing emaw compatible decorative lamination atan face finished zawk a pe thei a, cellular core erawh chuan panel weight zawng zawng tihtlem nan a pui thung.
Surface-layer structure dik tak chu product specification a zirin a danglam thei. Buyers te chuan board mamawh hian one-sided emaw two-sided co-extrusion a hmang em tih leh surface leh core color inmil a ngai em tih te an nemnghet tur a ni.
Co-Extruded PVC Foam Board hmanga siam a ni A siam dan
| Layer |
Function |
Buyers ten eng nge an nemnghet tur |
| Top Co-Extruded Surface a ni |
A hrual, a denser zawk finished surface a pe |
Color, gloss, surface hardness leh finishing mamawh te a ni |
| Foamed PVC Core a ni |
Board thickness a pek rualin panel weight pum pui a tihtlem bawk |
Density, rigidity, screw mamawh leh panel loading te a awm bawk |
| A hnuai lam Surface |
A tulna hmunah second finished surface a pe thei |
Single-sided emaw double-sided emaw co-extrusion leh reverse-face anga lang |
Engvangin Nge Cabinet atan Co-Extruded PVC Board hi hman?
Cabinet siamna hian board pakhatah hian simple printing emaw flat signage emaw aiin demand hrang hrang a dah a ni. Cabinet panel-te chu route, drill, screw, hinge vuah, laminated, paint emaw mechanical hardware hmanga assemble emaw a ngai thei.
Co-extruded PVC board hian foam core leh denser surface layers a thlunzawm a, hei hian cabinet siamtute chuan expanded PVC rit lam advantages te nen a smoother finished surface an mamawhna hmunah a pawimawh hle.
Final cabinet performance hi thickness, density, skin construction, panel dimension, hardware leh load-ah a la innghat tho. Co-extruded surface hardness chauh hi hardware testing aiah hman loh tur a ni.
16mm leh 18mm PVC Cabinet Board-ah hian a awm a
| A rilru a buai em em a, a rilru a hah em em bawk a. |
16mm Board |
18mm Board |
| Panel Thickness a ni |
Cabinet panel pawh a thim deuh |
Panel thickness pum pui a lian zawk |
| Weight Direction a ni |
Size leh density inang lo a nih chuan material volume tihhniam |
Size leh density inang lo a nih chuan material volume sang zawk |
| Typical Evaluation neih dan tur |
Cabinet ruang, interior panel leh furniture components te chu 16mm design nena inmil a ni |
Cabinet body, kawngkhar, shelf leh furniture component hrang hrangah panel thuk zawk mamawh a ni |
| Hardware hmanga siam a ni |
Screw sei zawng, hinge geometry leh edge distance te chu confirm rawh |
Tin, density, screw leh hinge validation a ngai bawk |
| Final Selection neih a ni |
Thickness chauh aiin cabinet design, density, skin construction, unsupported span, hardware leh load angin thlang zawk rawh |
Kitchen Cabinet hman dan tur
16mm leh 18mm co-extruded PVC foam board te hi kitchen cabinet ruang, kawngkhar, side panel, partition, shelf, drawer nena inzawm component leh decorative furniture panel te enfiah theih a ni.
Kitchen project atan chuan cabinet dimension, hinge awmna, drawer-slide attachment, shelf span, load beisei leh heat-generating appliances hnaih dan te chu final specification thlan hmain confirm hmasa phawt ang che.
Bathroom Cabinet hman dan tur
PVC foam board hi bathroom cabinet leh vanity components te tan a inzawm tlat a, a chhan chu material chhungkua hian thing hmanga siam panel tihfai loh tam tak nena khaikhin chuan tui hipna a nei tlem hle a ni.
Bathroom-cabinet performance zawh tawh pawh hi hardware, joint, adhesive, exposed holes, sealing leh installation-ah a innghat bawk. Fastener emaw joint emaw vel a tui ding reng chu panel ngei pawhin tui a lakluh tlem lai pawhin pumpelh tur a ni.
Cabinet Kawngkhar leh Furniture Panel te a awm bawk
A smooth co-extruded surface hi cabinet kawngkhar leh hmuh theih furniture panels atan a tangkai thei a, chutah chuan surface finished, painting emaw compatible decorative lamination emaw a ngai a ni.
Mass production hmain kawngkhar dimension, panel flatness, hinge load leh surface finishing te chu 16mm emaw 18mm grade thlan chhuah hmangin endik tur a ni.
Cabinet Shelf leh Unsupported Span te a awm bawk
Shelf performance hi thickness, density, unsupported span, load leh support arrangement ah a innghat a ni. 18mm board hian tehkhin theih 16mm board aiin stiffness nasa zawk a pe thei a, mahse thickness chauh hian shelf performance a hril lo.
Heavily loaded emaw long shelf emaw tan chuan board thlan chu intended span leh load hmangin validate rawh. Furniture design a zirin support emaw reinforcement dang emaw a ngai thei bawk.
Screw Holding, Hinge leh Cabinet Hardware te a awm bawk
Original product information-ah chuan PVC foam board hi drill, screw, nail leh rivet theih a ni tih a inziak a. Co-extruded surface layer hian hardware chhehvela board awm dan pawh a nghawng thei bawk.
Screw retention tak tak chu total thickness, density, vun structure, screw diameter, thread geometry, pilot-hole size, insertion depth, edge distance leh applied load ah a innghat a ni.
Cabinet hinge, drawer slide leh hardware load nawn fo tan chuan bulk production pawm hmain board-and-fastener combination tak tak chu test hmasa phawt ang che.
CNC Routing, Cutting leh Drilling te a awm bawk
PVC foam board hi original product information angin saw, punch, drill, sanded leh mechanically process theih a ni. Co-extruded board te hi cabinet siamnaah CNC routing leh grooving atan pawh evaluate theih a ni bawk.
CNC settings hian denser surface layer leh lower-density foam core pahnih hi a account tur a ni. Cabinet siamtute chuan prefabricated panel mamawhna hmunah routing depth, groove dimension, holes, hinge position, cut dimension leh tolerances te an pe tur a ni.
Edge Finishing leh Edge Banding te a awm bawk
Co-extruded foam board tan chuan machined edge-a cellular core chu a lang chhuak thin. Chuvangin furniture hmuh theih leh cabinet kilte chu a mamawh angin a siam zawh tawh angin ruahman tur a ni.
Edge banding mamawhna hmunah chuan bulk production hmain co-extruded board tak tak hmangin edge material, adhesive chemistry, application temperature leh finished edge appearance te chu confirm tur a ni.
Painting leh Decorative Lamination hmanga siam a ni
Co-extruded PVC surface smooth tak chu furniture leh cabinet siamna atana hman tur paint leh decorative laminate inmil tur atan evaluate theih a ni.
Surface tihfai, buatsaih, coating chemistry, adhesive thlan, application temperature leh curing condition te chu mass manufacturing hmain production surface tak tak nen validate tur a ni.
Single-Sided leh Double-Sided Co-Extrusion te hi a awm lo
| Structure |
Typical thlan dan tur |
| Single-Sided Co-Extrusion hmanga tihchhuah a ni |
Hmêl hmuh theih pakhatin a denser finished surface a mamawhna hmunah evaluate theih a ni a, chu chu selected backs emaw interior panels emaw a ni |
| A sir lehlamah Co-Extrusion a awm |
Hmai pahnih hian surface siam zawh a mamawhna hmunah a inzawm a, chu chu cabinet kawngkhar, partition leh furniture panel hmuh theih te ang chi te hi a ni |
Product zawng zawng hian vun inrem dan inang an hmang tih ngaihtuah ai chuan HSQY grade thlan tawh tan co-extruded surface construction awm tak tak chu nemnghet rawh.
Cabinet Production atan Density a pawimawh chhan
Source product-family specification-ah hian density 0.35 atanga 1.0g/cm³. Hei hi range zau tak a ni a, 18mm board pahnih density hrang hrang nei te chu machining, fastening leh loading laiin an che danglam thei a ni.
| Density Direction |
Cabinet thlan dan tur ngaihtuah tur |
| Density hniam zawk a ni |
Lightweight construction ngaih pawimawh berna hmunah board weight tihhniam |
| Density lai tak a ni |
Panel rit zawng, rigidity leh general cabinet siam dan a balance |
| Density sang zawk a awm |
Board structure kimchang a zirin demanding machining leh fastening tan rigidity nasa zawk leh support tha zawk a pe thei |
Cabinet order repeat tur chuan thickness, density leh co-extruded skin requirement te chu approved purchasing specification-ah telh vek tur a ni.
Reference Taksa lam thil neihte
A hnuaia value te hi original product information atanga humhalh a ni. PVC foam-board chhungkaw reference data angin an rawn tarlang a ni. Engineering emaw compliance thutlukna siamna atana hman hmain 16mm emaw 18mm co-extruded grade dik tak atana hman tur value te chu nemnghet hmasa phawt ang che.
| Testing Item |
Unit |
atanga chhuak Result |
| Sakhal zawng |
g/cm⊃3 a ni a; |
0.35–1.0 inkar a ni |
| Tensile chakna a nei |
MPa |
12–20-ah a awm |
| Bending chakna |
MPa |
12–18-ah a awm |
| Bending Elasticity Modulus hmanga siam a ni |
MPa |
800–900 inkar a ni |
| Impact chakna |
kJ/m⊃2 a ni a; |
8–15-ah a awm |
| Break-ah elongation a awm |
% . |
15–20-ah a awm |
| Shore Hardness a ni |
D |
45–50-ah a awm |
| Tui Hip dan |
% . |
≤1.5 a ni |
| Vicat Softening Point a ni |
°C a ni |
73–76-ah a awm |
| Listed Fire Performance a ni |
- |
Second 5 aia rei lovah mahni inthiarfihlim thei |
Cabinet-a hman tur Moisture Resistance
Source physical-property table-ah hian tui hip zat chu ≤1.5%-ah tarlan a ni. Hei hian kitchen leh bathroom cabinet hmanna atana moisture performance ngaihtuah tur pawimawh tak a siam a ni.
Cabinet performance zawh tawh chu system angin endik tur a la ni. Screw, hinge, joint, adhesive, decorative surface leh thil dangte hian PVC board atang ngei pawhin moisture limitation hrang hrang an nei thei a ni.
Kitchen Cabinet-a lumna ngaihtuah tur
Source product-family data-ah chuan Vicat softening point 73–76°C a awm tih a tarlang. Chuvangin oven, cooktop, dishwasher emaw heat-generating appliances dang bula dah cabinet panel-te chuan appliance siamtuin clearance leh insulation a mamawh angin a zawm tur a ni.
Cabinet siam zawh tawh chu service temperature beisei angin a dik tih finfiah a nih loh chuan board chu uninsulated high-temperature surface-ah direct-in dah suh.
Fire Performance a ni
Original product-family table-ah chuan second nga aia rei lovah mahni inthiarfihlim theih dan tur tarlan a ni.
Project pakhatin kangmei classification bik, flame-spread value, meikhu mamawh emaw building-code zawm emaw a mamawh chuan, test standard hman tur leh 16mm emaw 18mm co-extruded grade dik tak documentation dil rawh.
Cabinet leh Furniture hman dan tur thlalak
![16mm 18mm PVC co-extruded foam board cabinet hmanna tur a ni]( "PVC Co-Extruded Cabinet Board Application")
Cabinet Dilna atan Co-Extruded PVC Foam Board hmanga siam a ni a ni
![PVC furniture leh interior panel siamna tur co-extruded board]( "PVC Furniture Board Application")
PVC Furniture Panel siamna tur Co-Extruded Board
16mm / 18mm Co-Extruded Cabinet Board a tarlan dan
| RFQ Item |
Information pek tur |
| Thickness a ni |
16mm emaw 18mm emaw a ni thei |
| Sakhal zawng |
Density emaw target board weight emaw mamawh |
| Sheet Size a ni |
1220 × 2440mm, a dang listed sheet hmanga thil siam a ni size emaw cut dimension mamawh emaw a ni |
| Co-Extruded Structure hmanga siam a ni |
One-sided emaw two-sided finished surface mamawhna chu nemnghet rawh |
| Rawng |
Var emaw, mamawh rawng emaw |
| Pawnlang |
Glossy emaw matte emaw a ngai |
| Cabinet Component hmanga siam a ni |
Carcass, kawngkhar, shelf, partition, drawer component, side panel emaw furniture part dang emaw |
| CNC hmanga thil tih dan |
Cutting, routing, drilling, grooving, engraving leh dimensional tolerance te a awm bawk |
| Hardware hmanga siam a ni |
Hinge chi hrang hrang, screw specification, drawer slide, bracket leh fastening position te a awm bawk |
| Shelf / Panel phurh a ni |
Panel dimension siam zawh tawh, unsupported span, load beisei leh support spacing te |
| Surface Finishing tih a ni |
Painting, decorative film, lamination emaw original co-extruded surface emaw hmanga siam a ni |
| Edge Finish a ni |
Raw edge hmuh theih, edge banding emaw edge-treatment dang mamawh |
| Rawngbawlna boruak |
Kitchen, bathroom, furniture, sumdawnna chhung emaw hmanna dang emaw |
| Zawm |
Kangmei, chemical emaw destination-market emaw documentation mamawh |
| Zat |
A mamawh zat; tuna listed MOQ hi ton 3 a ni |
| Tumram |
Destination ram emaw lawng chawlhna hmun emaw |
PVC Foam Board hmanga siam a ni SGS Document a ni
Original product page hian a hnuaia PVC Foam Board hmanga siam a ni SGS document hi a pe a. Report chu project atana mamawh 16mm emaw 18mm co-extruded structure leh density dik takah a hman tih nemnghet rawh.
Packaging leh Commercial chungchanga hriat tur pawimawh te
Packaging: Plastic bag, carton, pallet leh kraft paper te chu original product information ah hian tarlan a ni.
MOQ: Tuna detailed specification-ah hian order zat tlem ber chu ton 3 a ni.
Pawisa pek tur: T/T, L/C, D/P leh Western Union te list a ni.
Delivery Terms: EXW, FOB, CNF leh DDU te hi original FAQ ah hian tarlan a ni. Incoterm mamawh chu quotation nen confirm rawh.
Lead Time: Main specification-ah hian deposit hnu ni 15–20 vel a awm. Tuna production schedule chu thickness, density, co-extruded structure leh order quantity angin confirm rawh.
Samples: Free stock sample chu a awm angin list a ni a, sample dilna angin express freight pawh ruahman a ni.
Co-Extruded PVC Cabinet Board chungchanga zawhna tam tak
Co-extruded PVC foam board chu eng nge ni?
Expanded PVC board a ni a, foamed PVC core leh denser co-extruded PVC surface layer hmanga siam a ni. Product thlan bik atan chuan surface structure dik tak chu confirm tur a ni.
Co-extruded PVC board leh standard PVC foam board te hi eng nge an danglamna?
Co-extruded board hian denseer surface layer hrang hrang a hmang a, chu chu foamed core nen a hmang dun a ni. Standard free-foam PVC board hian foam structure danglam tak a nei a, economical sign, printing leh general fabrication atan thlan a ni fo.
He product hi 16mm leh 18mm ah te a awm em?
Awle. He product page hian a bik takin cabinet leh furniture hmanna atana 16mm leh 18mm co-extruded PVC foam board te a tarlang a ni.
Cabinet atan eng nge tha zawk, 16mm nge 18mm?
Thickness pahnih hi universally chuan a tha zawk lo. Selection hi cabinet design, density, panel size, hardware, unsupported span leh load ah a innghat a ni. 18mm board hian thickness a pe tam zawk a, 16mm hian design-in a phalna hmunah material volume a tihhniam thei bawk.
Co-extruded PVC board hi kitchen cabinet atan hman theih a ni em?
Awle. Cabinet body, kawngkhar, shelf, side panel, partition leh kitchen furniture component dangte tan grade tling tak tak te chu endik theih a ni.
Bathroom cabinet atan hman theih a ni em?
Awle. Bathroom leh washroom cabinet te hi original application zingah hian tarlan a ni. Final performance chu cabinet design kimchang takah a innghat a, joint, hardware leh installation te pawh a tel.
Co-extruded PVC board hian cabinet screw a keng thei em?
Board hi mechanically fastened theih a ni a, mahse screw performance tak tak chu density, skin structure, screw geometry, pilot hole, insertion depth, edge distance leh applied load ah a innghat a ni. Cabinet hardware tak tak chu production hmain test hmasa phawt ang che.
Hinge hi 16mm emaw 18mm PVC board ah dah theih a ni em?
Hinge hi board grade tling tak hmangin evaluate theih a ni a, mahse hinge type, cup emaw screw geometry, density, door size leh loading te chu board tak tak hmangin validate tur a ni.
Board hi CNC routed theih a ni em?
Awle. Co-extruded PVC board hi CNC routing, cutting, drilling leh grooving atan evaluate theih a ni. Processing parameters hian a denser surface layer leh foam core te chu a account tur a ni.
Board hi edge banded a ni thei ang em?
Furniture edge siam zawh tawh a ngaihna hmunah edge banding hi evaluate theih a ni. Board tak tak hmangin edge material, adhesive leh application condition te chu confirm rawh.
Co-extruded PVC board hi paint theih a ni em?
Co-extruded surface ha tak takte chu a ha taka tihfai hnuah, surface buatsaih leh coating compatibility testing hnuah painting atan evaluate theih a ni.
decorative film hi board-ah laminated theih a ni em?
Decorative film inmil tak takte chu lamination atan evaluate theih a ni. Adhesive chemistry, surface buatsaih dan, temperature leh pressure te chu co-extruded surface tak tak nen test tur a ni.
Cabinet atan eng density nge ka thlan ang?
Density hi panel size, weight target, rigidity, screw mamawh leh cost a zirin thlan tur a ni. Original product-family information-ah chuan 0.35–1.0g/cm³, mahse cabinet grade mamawh chu a hranin confirm tur a ni.
Co-extruded PVC foam board hi tui tlak lohna a ni em?
Source product-family data chuan tui hip zat chu ≤1.5% a ni tih a tarlang. Finished cabinet moisture performance pawh hardware, hole, joint, adhesives leh installation details ah a innghat bawk.
Board hi oven emaw cooktop emaw bulah hman theih a ni em?
Source family data-ah chuan Vicat softening point 73–76°C a awm tih a tarlang. Appliance clearance leh insulation mamawh zawm la, cabinet system validate lovin uninsulated high-temperature surface-ah direct-in PVC board dah suh.
Board hi a kang thei lo em ni?
Source product-family table-ah hian second nga aia rei lovah mahni inthiarfihlim theih dan tur tarlan a ni. Fire classification bik a ngai a nih chuan co-extruded grade dik tak atan test report hman tur dil rawh.
Eng sheet hmanga thil siam a ni size nge awm?
A original product information-ah chuan 1220 × 2440mm, 915 × 1830mm, 1560 × 3050mm leh 2050 × 3050mm te chu PVC foam-board range zau zawk chhungah a awm a ni.
MOQ chu eng nge ni?
Tuna detailed product specification-ah hian MOQ ton 3 a awm tih tarlan a ni.
Sample a awm em?
Original product information-ah chuan free sample awm thei angin a awm. Sample dil hunah 16mm emaw 18mm thickness, density, surface leh express-freight arrangement mamawh chu nemnghet rawh.
Quotation atan eng information nge ka pek ang?
16mm emaw 18mm emaw thickness, density, sheet hmanga thil siam a ni dimensions, co-extruded surface mamawh, cabinet component, CNC drawing, hardware details, edge finish, surface finishing, quantity leh destination te pe rawh.
HSQY Plastic Group chungchang
HSQY Plastic Group hian cabinet siamtu, furniture factory, distributor, interior fabricator leh industrial buyers te hnenah PVC co-extrusion foam board leh PVC foam- sheet hmanga thil siam a ni thil dang a supply thin.
16mm leh 18mm cabinet-board project atan chuan density mamawh, sheet hmanga thil siam a ni dimension, surface structure, cabinet component, CNC mamawh, hardware specification, finishing process leh purchasing quantity te pe la, chutiang chuan board configuration dik tak chu enfiah theih a ni.
HSQY Qualification leh Exhibition chungchang hriat tur
![HSQY PVC foam board qualification chungchang hriat tur]( "HSQY Qualification Information")
HSQY Qualification chungchang hriat tur
![HSQY Plastic Group-in thil phochhuah chungchang a sawi]( "HSQY Exhibition Information")
HSQY Exhibition chungchang hriat tur
PVC Foam Board hmanga siam a ni SGS PDF hmanga siam a ni
