PS HI Takardar PS Naɗewa don Tsarin Thermoforming da Marufi
HSQY PS HIPS takardar abu roll wani nau'in polystyrene ne da aka fitar da shi don yin thermoforming, ƙirƙirar injin tsotsa, bugawa, yanke mutu da kuma amfani da marufi. Kauri daga 0.2mm zuwa 2.0mm da faɗi daga 300mm zuwa 1400mm suna samuwa don buƙatun canzawa da siffa daban-daban.
Ana iya samar da kayan a cikin tsari mai haske, mai haske ko mara haske bisa ga matakin PS da aka zaɓa, tare da saman mai sheƙi ko matte, launukan Pantone/RAL da tsare-tsare na musamman.
Ya kamata a zaɓi ma'aunin misali HIPS da takamaiman aikace-aikace bisa ga zurfin tsari, buƙatun tasiri, tsarin bugawa, aikin lantarki, tsarin shinge da amfani da samfurin da aka gama.
Neman HI Takardar PS Farashi Mai Sauƙi Nemi Samfura
PS HI Takardar PS Bayanan Naɗi
| Bayanin |
Kadara |
| Sunan Samfuri |
PS HI Takardar PS Na'urar ... |
| Kayan Aiki |
Polystyrene / Babban Tasirin Polystyrene bisa ga aikace-aikacen |
| Kauri |
0.2-2.0mm |
| Faɗi |
300-1400mm |
| Launi |
Launuka na Pantone / RAL ko alamu na musamman |
| Bayyanar |
Mai haske, mai haske ko mara haske dangane da matakin kayan aiki |
| saman |
Mai sheƙi ko matte |
| Sarrafawa |
Tsarin thermoforming, ƙirƙirar injin tsotsa, ƙirƙirar blister da yanke mutu |
| Nauyin Nauyi |
50-200kg ko kuma an keɓance shi |
| Matsakaicin kudin shiga (MOQ) |
Tan 1 |
| Samarwa a kowane wata |
Tan 3000-5000 |
| Takardu |
Takardun SGS, RoHS da ISO masu alaƙa, TDS da MSDS bisa ga matakin da aka bayar da buƙatun oda |
| Biyan kuɗi |
T/T, L/C, Western Union, PayPal da sauran hanyoyin da aka amince da su |
| jigilar kaya |
Jiragen ruwa, jigilar jiragen sama, jigilar kaya ta gaggawa ko ta ƙasa |
TDS da MSDS takardu ne na fasaha da aminci maimakon takaddun shaida masu zaman kansu na samfura. Ya kamata masu siye su tabbatar da waɗanne rahotannin bin ƙa'idodi da takardu ne suka shafi ainihin matakin kayan aiki, tsari, launi da kasuwar da za a je.
Aika Bayanin Naɗin HIPS ɗinka
Menene PS HI Takardar PS Roll?
Polystyrene, wanda aka fi sani da PS , wani abu ne da ake amfani da shi wajen yin thermoplastic wanda aka gina a kan styrene. Ana fitar da PS takardar abu nadi a matsayin kayan da ake amfani da su wajen yin ...
Babban Polystyrene, ko HIPS , wani nau'in polystyrene ne da aka gyara wanda aka ƙera don samar da ƙarfi fiye da polystyrene na yau da kullun yayin da yake riƙe da amfani mai ƙarfi da halayen sarrafawa.
Ana yawan zaɓar HIPS rollstock don samar da thermoforming da vacuum-forming saboda ana iya canza shi akai-akai zuwa tire , abubuwan sakawa, murfi, abubuwan marufi da sauran sassan da aka samar.
PS vs HI Takardar PS Nauyi
| Matsayin Zaɓin Ma'auni |
PS / GPPS |
HIPS |
| Kayan Aiki |
Polystyrene na gama gari |
Polystyrene da aka gyara ta hanyar tasiri |
| Bayyanar |
Zai iya zama bayyananne ko bayyananne dangane da daraja |
Yawanci ba ya da haske ko kuma yana da launi |
| Aikin Tasiri |
Ƙasa da gyaggyara-tasiri HIPS |
Tauri mafi girma don ƙirƙirar da ƙera sassa |
| Fifiko na Kullum |
Bayyana gaskiya, taurin kai da kuma sarrafa tattalin arziki |
Tsarin thermoforming, tauri, bugawa da marufi |
| Zaɓi |
Tabbatar da buƙatun samfuran gani, tsari da kuma samfuran da aka gama |
Tabbatar da tasiri, ƙirƙirar zurfin, launi da buƙatun saman |
PS HI Takardar PS Na'urar yin amfani da Thermoforming
Tsarin Thermoforming yana ɗaya daga cikin manyan hanyoyin sarrafa rollstock na HIPS . A lokacin samarwa, ana dumama takardar abu har sai ya yi girma sannan a sake siffanta shi ko ya zama mold ta amfani da injin tsabtace iska, matsi ko kuma injinan yin shi.
Ya kamata a zaɓi kauri na farko bisa ga zurfin mold da kuma yanayin da aka gama aiki saboda shimfiɗa kayan yayin ƙirƙirar yana rage kauri na bango na gida, musamman a kusurwoyi da ramuka masu zurfi.
| Bukatar Tsarin Thermoforming da Za a Bada |
Bayanin |
| Kauri na Farko |
Kauri da ake buƙata a cikin 0.2-2.0mm |
| Faɗin Naɗi |
Faɗin da ya dace da injin a cikin 300-1400mm |
| Girman Mod |
Tsawon da faɗin mold ɗin da aka gama |
| Zurfin Samarwa |
Matsakaicin zurfin rami ko jan ramin da ake buƙata |
| Katangar da aka gama |
Mafi ƙarancin kauri bango da aka yarda da shi bayan ƙirƙirar |
| Nauyin Nauyi |
50-200kg ko kuma an keɓance shi bisa ga iyakokin kayan aiki |
| saman |
Bukatar saman mai sheƙi, matte ko takamaiman aikace-aikace |
| Launi |
Samfurin jiki da aka amince da shi ko kuma samfurin Pantone/RAL |
PS HI Takardar PS Naɗi don Bugawa
Ana iya samar da HIPS don bugawa, alamu, zane-zane, kayan nuni da kuma marufi mai alamar kasuwanci inda ake buƙatar wani abu mai ƙarfi na filastik da za a iya bugawa.
Aikin bugawa ya dogara ne akan saman takardar abu , ƙarfin saman, sinadaran tawada, hanyar warkarwa da kayan aikin bugawa. Ya kamata masu siye su gano tsarin allo, offset, dijital ko UV da aka nufa kafin a samar da shi.
| Bukatar Bugawa |
Abin da Za a Tabbatar |
| Hanyar Bugawa |
Allo, kashe kuɗi, dijital, UV dijital ko wani tsari |
| Tsarin Tawada |
Sinadarin tawada da hanyar warkarwa |
| Ƙarshen Fuskar |
Bukatar mai sheƙi ko matte |
| Maganin Fuskar |
Corona ko wani magani inda tsarin bugawa ya buƙaci |
| Launi |
Fari, baƙi, Pantone/RAL ko launin tushe na musamman |
Maki na yau da kullun da aiki HIPS
Halayen hana tsayuwa, mai jurewa da kuma mai wargazawa ayyuka ne na musamman kuma bai kamata a ɗauka a matsayin mizanin mizanin HIPS takardar abu ba. Dole ne a ƙayyade aikin lantarki kafin a samar da shi.
| Bukatar Maki/Saituna |
Siyan |
| Daidaitacce HIPS |
Kauri, faɗi, saman, launi da buƙatun thermoforming |
| Anti-static HIPS |
Matsakaicin juriya da ake buƙata, hanyar gwaji da yanayin muhalli |
| Mai amfani da wutar lantarki HIPS |
Ana buƙatar amfani da wutar lantarki ko kuma abin da ke jure wa saman iska |
| Watsewa Mai Tsayi HIPS |
Manufa ta lantarki da kuma aikace-aikacen marufi na lantarki da aka yi niyya |
| Bugawa / Rufi Grade |
Tsarin bugawa, tsarin shafi, mannewa da buƙatar farfajiya |
| Tsarin Shingaye / Tsarin EVOH |
Tsarin Layer da ake buƙata, manufa ta shinge, aikace-aikacen marufi da buƙatun gwaji |
Halayen Jiki na Tunani
Halayen jiki sun bambanta da matakin PS ko HIPS , tsari, kauri da hanyar gwaji. Ya kamata a tabbatar da ƙimar da ke ƙasa bisa ga bayanan fasaha masu dacewa takardar abu kafin ƙirar injiniya ko amincewa da samfur.
| Kadara |
Darajar |
| Yawan yawa |
1.05 g/cm³ |
| Gudanar da wutar lantarki |
10⁻⊃1;⁶ S/m |
| Tsarin kwararar zafi |
0.08 W/(m·K) |
| Modulus na Matasa |
3000-3600 MPa |
| Ƙarfin Taurin Kai |
46-60 MPa |
| Ƙarawa |
Kashi 3-4% |
| Gwajin Tasirin Charpy |
2-5 kJ/m² |
| Zafin Canjin Gilashi |
80-100°C |
| Ma'aunin Faɗaɗawar Zafi |
8 × 10⁻⁵/K |
| Ƙarfin Zafi |
1.3 kJ/(kg·K) |
| Shan Ruwa |
0.03-0.1% |
| Zafin Lalacewa |
280°C |
Aikace-aikacen PS HI Takardar PS Rolls
Marufi Mai Tsarin Thermoformed: Tire, abubuwan da aka saka, abubuwan da aka haɗa da blister da sauran samfuran marufi da aka samar ta amfani da matakin PS ko HIPS mai dacewa.
Bugawa da Nuni: Zane-zanen da aka buga, alamu, kayan nuni da kayan talla inda ake buƙatar iya bugawa da tauri.
Marufi na Lantarki: An ƙirƙiri tire da marufi mai kariya ta amfani da ma'aunin daidaito, anti-static, conductive ko static-dissipative bisa ga buƙatun aikin lantarki.
Kayayyakin Masu Amfani: Zaɓaɓɓun kayan aiki, kayan wasa, kayan lambu da sauran sassan da aka ƙera da zafi ko aka ƙera.
Marufin Abinci: PS ko HIPS za a iya amfani da su don zaɓaɓɓun aikace-aikacen marufin abinci idan ainihin resin, ƙari, tsari da takaddun da suka dace da abinci sun dace da kasuwar da ake nufi da yanayin amfani.
Abin da Masu Sayayya Ya Kamata Su Tabbatar Kafin Su Yi Oda
| Bayanin Bukatar |
da Za a Bada |
| Aikace-aikace |
Tsarin thermoforming, injin tsabtace iska, bugawa, marufi, kayan lantarki ko wani amfani |
| Kayan Aiki |
Ana buƙatar daidaitaccen PS , HIPS , ESD ko shawarwari |
| Kauri |
Kauri da ake buƙata tsakanin 0.2mm da 2.0mm |
| Faɗin Naɗi |
Faɗin da ake buƙata tsakanin 300mm da 1400mm |
| Nauyin Nauyi |
50-200kg ko nauyin birgima na musamman da ake buƙata |
| Launi |
Samfurin jiki da aka amince da shi ko kuma samfurin Pantone/RAL |
| saman |
Bukatar saman da ke da sheƙi, matte ko kuma takamaiman bugu |
| Bayyana gaskiya |
Mai haske, mai haske ko mara haske bisa ga matakin kayan aiki |
| Bukatar Aiki |
Daidaitacce, anti-static, conductive, static dissipative, coated, shamaki ko wasu buƙatu |
| Bayanin Samarwa |
Girman mold, zurfin tsari da mafi ƙarancin buƙatun bango da aka gama |
| Adadi |
Adadin gwaji, adadin oda na yau da kullun da kuma ƙimar buƙata ta wata-wata |
| Inda za a je |
Ƙasa, tashar jiragen ruwa da kuma hanyar jigilar kaya da ake buƙata |
Sami PS HI Takardar PS Ra'ayin Gabatarwa
Tambayoyin da Ake Yawan Yi
Menene PS HIPS takardar abu roll?
PS HIPS takardar abu na'urar jujjuyawar polystyrene ce mai ci gaba da ake amfani da ita don yin thermoforming, ƙirƙirar injin tsotsa, yanke ƙura, bugawa da kuma zaɓaɓɓun marufi ko aikace-aikacen canza masana'antu.
Menene bambanci tsakanin PS da HIPS ?
Tsarin amfani na yau da kullun PS yana da tauri da kuma karyewa, yayin da HIPS ana gyara shi ta hanyar tasiri don samar da ƙarin tauri. HIPS galibi ana zaɓar shi don aikace-aikacen thermoforming, marufi da bugawa waɗanda ke buƙatar ingantaccen aikin tasiri.
Wadanne kauri ake samu?
Tsarin PS HIPS takardar abu na birgima yana rufe kauri daga 0.2mm zuwa 2.0mm.
Wadanne faɗin birgima ake samu?
Faɗin da ake da shi yana tsakanin 300mm zuwa 1400mm. A samar da injin thermoforming ko faɗin layin juyawa lokacin da ake neman ƙiyasin farashi.
Nawa ne nauyin birgima?
Nauyin birgima yana tsakanin kimanin kilogiram 50 zuwa 200 kuma ana iya keɓance shi bisa ga kayan aiki da buƙatun sufuri.
Shin HIPS takardar abu za a iya yin birgima a yanayin zafi?
Eh. Tsarin thermoforming da kuma tsarin vacuum manyan aikace-aikace ne na sarrafawa don mirgina HIPS takardar abu masu dacewa. Ya kamata a kimanta yanayin mold, zurfin tsari da kauri bango da ake buƙata kafin a kammala ma'aunin farawa.
Za a iya buga birgima PS HIPS takardar abu ?
Eh. Ana iya amfani da HIPS don aikace-aikacen bugawa. Dacewar bugawa ya dogara ne akan kammala saman, sinadaran tawada, kayan aikin bugawa da duk wani maganin saman da ake buƙata.
Akwai matakan anti-static da conductive?
Tsarin hana-tsaye, mai jurewa da kuma mai wargazawa suna samuwa a matsayin zaɓuɓɓuka na musamman. Kayyade kewayon juriyar lantarki da ake buƙata da hanyar gwaji maimakon ɗauka cewa daidaitaccen HIPS yana da waɗannan kaddarorin.
Za a iya amfani da HIPS takardar abu roll don shirya abinci?
Za a iya la'akari da makin PS ko HIPS da aka zaɓa don aikace-aikacen shirya abinci. Dole ne a tabbatar da ainihin resin, ƙarin abubuwa da takaddun da suka shafi abinci bisa ga kasuwar da za a je, nau'in abinci da yanayin amfani.
Menene MOQ?
Mafi ƙarancin adadin oda shine tan 1.
Wane bayani ya kamata in bayar don yin ƙiyasin farashi?
Don Allah a samar da matakin kayan aiki, kauri, faɗin birgima, nauyin birgima, saman, launi, bayyananne, hanyar sarrafawa, buƙatun aiki, adadi, wurin da za a je da kuma takardun da ake buƙata.
Tuntuɓi HSQY don Samfura da Farashi
Menene Polystyrene/ Takardar PS Roll?
Polystyrene (ko ' PS ') Roba takardar abu roba polymer ne da aka haɗa daga monomer na styrene ta hanyar haɗakar polymerization mai ƙarfi, dabarar sinadarai ita ce (C8H8)n. Yana da thermoplastic mara launi kuma mai haske tare da zafin canzawar gilashi sama da 100°C. Suna: Naɗin Takardar Polystyrene / PS Naɗin Takardar
Alamar: BABBAN JAGORA
Takaddun shaida: Takaddun shaida SGS, ROHS, ISO, TDS, MSDS, da sauransu.
Launi: Launi na Pantone / RAL ko tsarin musamman
Faɗi: 300~1400mm
Kauri: 0.2~2.0mm
ESD: Mai hana tsayuwa, mai isar da sako, mai watsawa a tsaye. Bugawa; Rufi; EVOH; Mai hana ruwa; da sauransu
Fasahar sarrafawa Tsarin Ɓoyayyen Ma'adinan Tsaftacewa, Yanke Mutuwa
Bayyanar Gaskiya: Bayyanar Gaskiya, Bayyanar Gaskiya, da kuma Bayyanar Gaskiya.
Fuskar:Mai sheƙi/Matsakaici
Nauyi a kowace mirgina: 50-200kg ko aka keɓance shi
MOQ: tan 1
Samarwa na wata-wata: tan 3000 ~ tan 5000
Hanyoyin Isarwa: Jigilar kaya ta teku, jigilar iska, jigilar kaya ta gaggawa, jigilar ƙasa.
Kasuwar duniya: Turai, Kudancin Amurka, Arewacin Amurka, Turai, Tsakiyar Asiya, Kudu maso Gabashin Asiya, Kudancin Asiya, Gabas ta Tsakiya, Ostiraliya, da sauransu.
Lokacin Biyan Kuɗi: Lokacin Biyan Kuɗi Katin kiredit, T/T, L/C, Western Union, Paypal.
Halayen Jiki da Sinadarai na PS HIPS Babban Tasirin Polystyrene Takardar filastik Rolls
Yawan yawa: 1.05 g/cm3
Watsawa:(σ) 10-16 S/m Watsawa mai zafi 0.08W/(m·K)
Matakan Young:(E) 3000-3600 MPa
Ƙarfin tauri:(σt) 46–60 MPa
Tsawon tsayi: 3–4%
Gwajin tasirin Charpy: 2–5 kJ/m2
Zafin canjin gilashi:80-100℃
Ma'aunin faɗaɗa zafi:(α) 8×10-5/K
Ƙarfin zafi:(c) 1.3 kJ/(kg·K)
Shakar ruwa: (ASTM) 0.03–0.1
Ragewa: 280℃
Amfani da PS HIPS Babban Polystyrene Mai Tasiri Takardar filastik Rolls
Polystyrene takardar abu filastik ne mai amfani da thermoforming takardar abu wanda ake amfani da shi sosai wajen kera kayayyakin masarufi daban-daban. A matsayinsa na filastik mai tauri, ana amfani da shi sosai wajen samar da kayan marufi na abinci da kayan dakin gwaje-gwaje. Idan aka haɗa shi da launuka daban-daban, ƙari ko wasu robobi, ana iya amfani da polystyrene don yin kayayyaki kamar kayan lantarki, kayayyakin lantarki, sassan motoci, kayan wasa, tukwane da kayan lambu.
![Rigid PS Fim Sheet Rolls]()
