Kana nan: Gida » » Takardar Roba » Takardar PVC » Takardar Inuwar Fitilar PVC » » Takardun PVC na farin madarar madara mai micron 300

Takardun PVC na farin inuwar madara mai ma'aunin micron 300

Raba zuwa:

Takardun PVC na farin inuwar madara mai ma'aunin micron 300

HSQY tana samar da zanen gado na PVC mai launin madara mai launin micron 300 don teburi, bene, abin ɗagawa da fitilun ado, tare da watsa haske mai laushi, faɗin da aka keɓance, launuka, saman, tsarin birgima da samfura.

Samfuri:
TAKARDAR PVC 01
Alamar kasuwanci:
HSQY
Nau'in Samfuri:
takardar inuwar fitilar PVC
Launi:
fari
Kauri:
0.3mm-0.5mm (Kwatantawa)
Faɗi:
1300-1500mm (Kyautatawa)
Aikace-aikace:
inuwar fitila
Moq:
2000 KG.

Samuwa:



Bincike

Bayanin Samfurin

Bayanin Samfurin

Takardar Inuwar Fitilar Madara Farin PVC Mai 300 Micron

HSQY tana ƙera zanen fitilar PVC mai launin madara mai launin micron 300 don fitilun teburi, fitilun bene, fitilun da aka yi da lu'u-lu'u, fitilun bango, hasken otal da kayan ado na musamman. Takardar PVC mai launin fari mai haske 0.30 mm tana ba da daidaiton yaɗuwar haske, tsarin inuwa, sassauci da kuma daidaiton juyawa don samar da inuwar fitilar ƙwararru.

Bayyanar farin madara yana taimakawa wajen laushin haske kai tsaye, rage wuraren zafi da ake iya gani da kuma ɓoye kwan fitila ko firam ɗin ciki yadda ya kamata fiye da fim ɗin da ya cika haske. Ana samun saman mai sheƙi da matte, launuka na musamman, girman takarda da faɗin birgima bisa ga tasirin gani da ake buƙata, diamita na inuwar fitila da hanyar samarwa.

Don zaɓar kayan da suka dace, a samar da nau'in fitilar, tushen haske, girman inuwa, watsa hasken da ake buƙata, kammala saman, hanyar sarrafawa da adadin oda. Dole ne a tabbatar da buƙatun harshen wuta, waya mai haske, zafi da hasken da aka gama daban-daban don ƙirar kasuwa da kayan aiki.

Nemi Fa'idar Takardar Shafa Lampshade ta PVC

Takardar Shafawa ta Madara Farin PVC Aikace-aikace

Takardar PVC mai farin madara mai micron 300 da aka yi amfani da ita don fitilar tebur

Aikace-aikacen Fitilar Tebur

takardar murfin fitilar PVC mai launin madara don hasken ado

Aikace-aikacen Hasken Ado

ƙirar inuwar fitila ta musamman da aka yi da takardar farin madara ta PVC

Aikace-aikacen Zane na Musamman

kayan fitilar PVC mai haske mai haske don hasken cikin gida

Aikace-aikacen Hasken Cikin Gida

Bayanin Takardar Inuwar Fitilar PVC Mai Micron 300

Kadara	Cikakkun Bayanan
Sunan Samfuri	Takardar Inuwar Fitilar Madara Farin PVC Mai 300 Micron
Kayan Aiki	Tsarin polyvinyl chloride mai ƙarfi ko mai ƙarfi (PVC) don canza inuwar fitila
Babban Kauri	Ma'aunin 300 / 0.30 mm
Nisan inuwar fitila ta gama gari	0.30–0.50 mm; sauran kauri suna ƙarƙashin aikace-aikace da tabbatar da samarwa
Girman Takarda na Daidaitacce	700 × 1000 mm, 915 × 1830 mm, 1220 × 2440 mm ko kuma an keɓance shi
Faɗin Naɗi	Yawanci 1300-1500 mm; ana iya tattauna yankewar musamman
Yawan yawa	Kimanin 1.36–1.42 g/cm³
Launi	Farin madara, fari mai haske ko launuka na musamman
saman	Mai sheƙi, matte ko kuma yanayin rubutu na musamman
Tsarin da ake da su	Takarda ko nadi; zaɓuɓɓukan da za a iya bugawa ko kuma waɗanda aka manne a bayansu waɗanda za a iya tabbatarwa
Hanyoyin Sarrafawa	Yankewa, yanke mutu, ƙima, lanƙwasawa, bugawa, lamination da kuma hanyoyin walda da aka zaɓa
Aikace-aikace	Fitilun teburi, fitilun bene, fitilun da aka yi da lu'u-lu'u, fitilun bango, hasken otal, launukan da aka lulluɓe da yadi da hasken ado
Takardu Masu Inganci	Akwai rahotannin da suka shafi SGS da takaddun tsarin ingancin ISO, dangane da ingancin yanzu da kuma matakin samfurin
Matsakaicin kudin shiga (MOQ)	1000 kg; launuka ko saman da aka keɓance na iya buƙatar MOQ daban
Samfuri	Ana iya samun samfurin hannun jari mai girman A4; yawanci ana karɓar jigilar kaya daga ƙasashen waje.
Sharuɗɗan Biyan Kuɗi	T/T, L/C, Western Union ko PayPal, dangane da tabbatar da oda
Sharuɗɗan Isarwa	EXW, FOB, CNF ko DDU
Lokacin Gabatarwa na Yau da Kullum	Kimanin kwanaki 15-20 don umarni na yau da kullun, dangane da ƙayyadaddun bayanai da jadawalin samarwa

Me yasa ake amfani da PVC mai ƙarfin 300 Micron don samar da fitilar fitila?

Ana amfani da kauri mai girman micron 300 sosai don inuwar fitilu masu sauƙi saboda yana ba da isasshen jiki don ɗaukar ganga, daular, oval ko siffar inuwa ta musamman yayin da yake da sauƙin yankewa, ƙirgawa, birgima da haɗawa da firam ɗin. Ya dace musamman ga ƙananan inuwar fitilu da matsakaici, ƙira masu goyon bayan yadi da kuma canza girma mai yawa.

Kauri daidai ya dogara ne da diamita na inuwa, tsayin allon, tazarar firam, murfin ado da kuma taurin da ake buƙata. Manyan launuka ko bangarorin da ba a tallafa musu ba na iya buƙatar takarda mai kauri, ginin da aka ƙarfafa ko kuma wani nau'in filastik daban. Ana ba da shawarar a gwada samfurin kafin a samar da shi da yawa.

Yaɗuwar Haske da Bayyanar Farin Madara

An ƙera PVC mai launin madara don ya watsa wani ɓangare na hasken yayin da yake watsa shi a saman. Wannan yana samar da tasirin gani mai laushi fiye da PVC mai haske kuma yana rage ganin kwan fitila kai tsaye, wuraren LED da tsarin inuwa na ciki. Aikin gani yana tasiri ne ta hanyar yawan launin, kauri na takarda, yanayin saman da tushen hasken da aka yi amfani da shi a cikin kayan aikin da aka gama.

'Farin madara,' 'farin haske mai haske' da 'farin opal' kwatancen gani ne maimakon takamaiman haske na duniya. Masu siye waɗanda ke buƙatar watsa haske mai sarrafawa, hazo, daidaitawar launi ko aikin watsawa yakamata su samar da maƙasudai na lambobi ko samfurin tunani da aka amince da shi.

Mahimman Sifofi na Madara Farin PVC Fitila

Yaɗuwar haske mai laushi: Yana taimakawa rage hasken kai tsaye kuma yana haifar da kamanni mai haske iri ɗaya.

Launi mai launin fari mai daidaito: Yana ɓoye kwan fitila da firam ɗin yayin da yake kiyaye haske mai ƙarfi.

Kyakkyawan lanƙwasa: Yana tallafawa ingantaccen yankewa, bugawa, lamination da haɗa inuwa.

Taurin aiki: Ma'aunin 0.30 mm yana samar da tsari ba tare da yin wahalar birgima ko samar da kayan ba.

Ana iya bugawa da lamina: Ana iya buga ko haɗa maki masu dacewa da yadi, fuskar bangon waya, takardar takarda da sauran saman ado bayan gwajin jituwa.

Juriyar Danshi: Tsarin PVC yana taimakawa wajen kare inuwar da ke bayan gida a cikin yanayi na yau da kullun.

Zaɓuɓɓukan hana rawaya: Ana iya tattauna hanyoyin da aka daidaita da UV da kuma waɗanda ke hana iskar shaka bisa ga yanayin sabis ɗin da ake buƙata.

Kayan da aka keɓance: Za a iya daidaita launi, sheƙi, matakin matte, kauri, girman takardar, faɗin birgima da marufi don ayyukan B2B.

Aikace-aikacen Takardar Shafa Fitilar PVC

Inuwar fitilun teburi: Goyon bayan gini da haske mai haske don fitilun teburi na gefen gado, teburi da na teburi masu ado.

Inuwar fitilun bene: Inuwar ganga, daular da kuma launuka na musamman don cikin gida ko na baƙi.

Fitilun rufi da rufi: Faifan inuwa masu haske don kayan ado da aka dakatar.

Fitilun bango da ƙuraje: Faifan watsawa masu lanƙwasa ko waɗanda aka ƙera don haskaka hasken cikin gida.

Inuwar fitilun da aka lulluɓe da yadi: An lulluɓe bayan PVC da lilin, auduga, polyester, fuskar bangon waya ko wasu kayan ado.

Hasken ado na kasuwanci: Otal, gidan abinci, dillalai da ayyukan hasken ciki na musamman.

Duba cikakken Tsarin takardar inuwar fitilar PVC don matte, mai mannewa, mai bugawa da zaɓuɓɓuka na musamman.

Yankewa, Bugawa da Haɗa Inuwar Fitila

Yawanci ana iya yanke takardar micron 300 ta amfani da na'urorin yankewa masu juyawa, na'urorin yanke takarda ko kayan aikin yanke takarda masu dacewa. Haka kuma ana iya yin zane, birgima da haɗa shi a kusa da zoben inuwar fitilar ƙarfe. Ya kamata a daidaita yanayin share kayan aiki da yankewa don guje wa fashewa, ɓarna ko ƙonewa mai yawa.

Bugawa, laminating da kuma haɗa yadi ya dogara ne akan kuzarin saman, tsarin tawada, nau'in manne da yanayin samarwa. Ana iya buƙatar maganin Corona, primer ko manne mai jituwa da PVC. Masu siye ya kamata su gwada mannewa a bugu, ƙarfin barewa, canjin launi da kuma bayyanar haske kafin su amince da samar da taro.

A ajiye takardar nesa da inda za a iya shiga kai tsaye da kwan fitila ko wasu abubuwan da ke da zafi sosai. Tsarin inuwar fitilar da aka gama ya kamata ya samar da isasshen sarari da iska kuma ya kamata a kimanta shi bisa ga buƙatun haske da kasuwa.

Yadda Ake Ƙayyade Takardar PVC don Aikin Hasken Fitila

A haɗa da waɗannan bayanan lokacin neman shawara ko ƙiyasin farashi:

1. Nau'in fitila da siffar inuwar fitila.

2. Girman inuwa, tsayi da tsarin firam ɗin da aka gama.

3. Kauri da ake buƙata, girman takardar ko faɗin birgima.

4. Inuwar farin madara, haske da kuma kammala saman.

5. Gine-gine mai sauƙi, mai sauƙin bugawa, mai mannewa ko kuma mai lanƙwasa da aka yi da yadi.

6. Nau'in kwan fitila ko LED, ƙarfin wutar lantarki, ikon sharewa da kuma yanayin zafin aiki da ake sa ran samu.

7. Ana buƙatar harshen wuta, waya mai haske, RoHS, REACH ko takaddun takamaiman abokin ciniki.

8. Yawan oda, buƙatun shekara-shekara da tashar jiragen ruwa da za a kai.

La'akari da Inganci da Tsaron Haske

Rahotannin SGS na matakin kayan aiki ko takaddun tsarin ingancin ISO ba sa tabbatar da cewa an kammala fitilar ko inuwar fitilar da aka gama. Kimantawar da ake buƙata ta dogara ne akan kasuwar da ake zuwa, tushen haske, ginin wutar lantarki, yanayin zafi na sassan, share inuwa da ƙirar hasken da aka gama.

Idan ana buƙatar aikin hana harshen wuta ko walƙiya, a ƙayyade ainihin ma'aunin gwaji, kauri na kayan, launi da kuma sharuɗɗan karɓa. HSQY zai tabbatar ko akwai rahoton daidaito da ya dace. Kada a taɓa kwatanta takardar farin madara ta yau da kullun a matsayin 'mai kashe kansa,' '' UL certified' ko 'mai jure zafi mai yawa' sai dai idan rahoton takamaiman samfurin ya goyi bayan wannan iƙirarin.

Shiryawa da Isarwa

Samfurin marufi: Samfuran girman A4 da aka saka a cikin jakar PP mai kariya ko kwali.

Shirya takardar: Takardu da aka naɗe da fim ɗin PE ko takardar kraft kuma an kare su da allunan tauri.

Marufi na Naɗi: Ana iya keɓance marufi na Naɗi bisa ga faɗi, tsayi, core da buƙatun sufuri.

Marufin fale-falen: Kimanin kilogiram 500-2000 a kowace fale-falen plywood, ya danganta da tsarin samfurin da girmansa.

Lodawa a cikin kwantena: Yawan lodawa na ƙarshe ya dogara da girman birgima ko takarda, tsarin pallet da iyakokin nauyin kwantena.

Jigilar Kaya: Ana jigilar oda mai yawa ta teku; ana iya aika samfuran ta DHL, FedEx, UPS, TNT ko wani mai aika kaya da aka amince da shi.

Lokacin jagora na yau da kullun: Kimanin kwanaki 15-20 bayan an tabbatar da ƙayyadaddun bayanai, biyan kuɗi da jadawalin samarwa.

Shirya fakitin fakitin fitilar PVC don fitarwa

Pallet Packaging

Ana loda kwantena

Tambayoyin da Ake Yawan Yi

Menene takardar murfin fitilar PVC mai launin madara mai 300 micron?

Takardar farin PVC ce mai haske mai girman mm 0.30 da ake amfani da ita a matsayin tsari ko kuma mai haskaka haske a cikin inuwar fitilu. Tana laushi haske kai tsaye, tana taimakawa wajen ɓoye kwan fitila kuma tana ba da isasshen ƙarfi ga launuka iri-iri na teburi, bene, abin wuya da kuma na ado.

Shin kauri mai girman micron 300 na PVC ya isa ga inuwar fitila?

Ya dace da ƙananan inuwar fitilu da yawa, musamman idan an tallafa musu da zoben ƙarfe ko kuma an yi musu laminate da yadi. Manyan diamita, manyan bangarori ko ƙira marasa tallafi na iya buƙatar kayan da suka fi kauri ko ƙarin ƙarfafawa.

Shin madarar farin PVC ta toshe kwalbar gaba ɗaya?

Yana rage ganin kwan fitila amma ba lallai bane ya sa inuwar ta yi haske. Kammalawar ƙarshe ta dogara ne da matakin launin, kauri, saman, hasken kwan fitila da nisan kallo. Nemi samfurin lokacin da ake buƙatar takamaiman matakin ɓuya.

Za a iya buga takardar PVC ta fitila ko a rufe ta da yadi?

Eh. Ana iya buga ko kuma a yi wa ma'auni masu dacewa da yadi, fuskar bangon waya da sauran kayan ado. Dole ne a gwada daidaiton tawada da manne, kuma ana iya buƙatar maganin saman ko faranti.

Shin akwai PVC mai mannewa don inuwar fitilu?

Za a iya tattauna zaɓuɓɓukan da aka yi amfani da su wajen mannewa don kera inuwar fitilar masana'anta. A samar da kayan ado, ƙarfin barewa da ake buƙata, tsarin sakin layi da yanayin aiki don HSQY ya tabbatar da ingantaccen tsari.

Shin takardar murfin fitilar PVC tana jure zafi kuma tana hana harshen wuta?

Bai kamata a bayyana takardar inuwar fitilar PVC ta yau da kullun a matsayin mai hana harshen wuta ko kuma wanda ya dace da takamaiman zafin jiki ba. Waɗannan halayen sun dogara ne akan tsari, kauri da hanyar gwaji. Faɗi yanayin zafin aiki da ake buƙata kafin yin oda.

Za a iya keɓance watsa launi da haske?

Eh. Ana iya daidaita launin farin madara, haske, sheƙi, matakin matte da launuka na musamman dangane da MOQ da yuwuwar fasaha. Ana ba da shawarar samfurin jiki da aka amince da shi don daidaita haske da launi.

Menene mafi ƙarancin adadin oda?

MOQ ɗin da aka lissafa shine kilogiram 1000. Launuka na musamman, aikin gani na musamman, rufin manne, faɗin da ba na yau da kullun ba ko wasu buƙatu na musamman na iya samun MOQ daban.

Zan iya neman samfurin kafin a samar da kayayyaki da yawa?

Eh. Ana iya samun samfuran kaya masu girman A4 don duba launi, tauri, yaɗuwa, bugawa da haɗawa. Yawanci mai siye ne ke biyan kuɗin jigilar kaya ta hanyar jigilar kaya.

Wane bayani ake buƙata don yin ƙiyasin farashi?

Bayar da kauri, faɗi ko girman takarda, tsawon birgima, launi, saman, buƙatar gani, buƙatar manne ko bugawa, aikace-aikace, adadi da tashar da za a kai. Zane mai launi ko samfurin tunani zai inganta daidaiton ƙayyadaddun bayanai.

Mai ƙera takardar fitilar PVC

Kamfanin Changzhou Huisu Qinye Plastic Group Co., Ltd. yana samar da kayan takarda da fim na PVC don inuwar fitila, bugawa, marufi, gyaran zafi da kuma canza masana'antu. HSQY yana tallafawa kauri na musamman, launuka, saman, girman takardu, faɗin birgima, samfura da kuma marufi na fitarwa ga masana'antun hasken wuta na ƙasashen duniya da masu samar da inuwar fitila.

Aika girman inuwar fitilar ku, manufa ta gani, murfin ado, hanyar sarrafawa da kuma buƙatar shekara-shekara don shawarwarin kayan aiki da ambato.

Lambobin Roba na HSQY

Na baya:

Na gaba: