Takardun PVC Masu Tauri 0.5mm 1mm Masu Haske

Takardun PVC masu ƙarfi 0.5mm da 1mm masu haske

HSQY tana ƙera zanen PVC mai haske mai girman 0.5mm da 1mm don akwatunan naɗewa masu haske, tagogi na akwatin takarda, bugawa, gyaran zafi, samar da injin tsotsa, nunin kaya, kayan kariya da kuma canza filastik na masana'antu.

Kayan ya haɗu da bayyananniyar ganuwa ta samfurin, taurin aiki, tallafi mai girma, ƙarancin sha danshi da kuma dacewa da tsarin yankewa, bugawa, naɗewa da ƙirƙirar abubuwa.

Takardar PVC mai haske 0.5mm tana da sauƙi kuma tana da sauƙin ɗauka, naɗewa kuma ba ta da zurfi. Ana amfani da ita don kwalaye masu haske, tagogi masu marufi, murfin da aka buga, kayan da aka saka a nuni da kuma marufi mai sauƙi na thermoformed.

Takardar PVC mai haske mai tsawon mm 1 tana ba da ƙarin tauri da riƙe siffar. Ya fi dacewa da allunan nuni masu tauri, abubuwan da aka saka a ciki, abubuwan da aka haɗa, marufi mai ɗorewa da sassan da aka ƙera waɗanda ke buƙatar ƙarin tallafi.

HSQY yana samar da PVC mai haske a cikin birgima, zanen gado mai faɗi da kuma guntu-guntu da aka yanke musamman. Ana iya keɓance faɗin birgima, girman takardar, launin launi, bayyanawa, ƙarewar saman, fim mai kariya, matakin abun ciki da aka sake amfani da shi da kuma marufi na fitarwa.

PVC mai ingancin bugu, mai girman akwati na naɗewa, mai ƙarfin thermoforming, mai hana tsatsa, mai daidaita UV, mai sauƙin gyarawa da kuma mai hana harshen wuta zaɓuɓɓuka ne daban-daban na fasaha. Ya kamata masu siye su ƙayyade ainihin hanyar sarrafawa da kuma ƙa'idar gwaji da ake buƙata kafin yin oda.

Nemi Farashi Mai Kyau na Takardar PVC    Nemi Samfuran Kayan Aiki

Bidiyon Takardar PVC Mai Tauri Mai Inganci

Kalli bidiyon da ke ƙasa don ƙarin koyo game da zanen PVC mai haske na HSQY, kauri da ake da shi, kammala saman, samar da birgima da aikace-aikacen marufi.

Menene Takardar PVC Mai Tsauri Mai Bayyananne?

Takardar PVC mai ƙarfi mai haske wani abu ne mai haske wanda aka ƙera daga wani abu mai ƙarfi na polyvinyl chloride. Ba kamar fim ɗin PVC mai sassauƙa ba, yana ɗauke da tsari wanda aka ƙera don kiyaye tauri mai amfani da kwanciyar hankali.

Dangane da tsarin da aka ƙera shi da kuma yadda aka ƙera shi, ana iya buga PVC mai tauri, yanke shi, yanke shi, sanya masa maki, naɗe shi, huda shi, haƙa shi, ɗaure shi, sanya injin tsabtace iska ko kuma yin amfani da thermoform.

Ana amfani da kalmomin takardar PVC mai ƙarfi, fim ɗin PVC mai haske, takardar vinyl mai ƙarfi, takardar akwatin naɗewa ta PVC da takardar thermoforming ta PVC don samfuran da suka shafi hakan. Ya kamata masu siye su ƙayyade kauri, tauri, fom ɗin wadata da amfani domin waɗannan sunayen ba koyaushe suke bayyana matsayi ɗaya ba.

Bai kamata a ɗauki takardar PVC mai tsabta ta amfani da manufa ta gabaɗaya a matsayin takardar bugawa, takardar magani, takardar hulɗa da abinci, takardar waje ta dogon lokaci ko kuma kayan da aka gwada don hana harshen wuta ta atomatik ba.

Hotunan Takardar PVC Mai Tauri

Hotunan Aikace-aikacen Takardar PVC Mai Gaskiya

Bayani dalla-dalla game da Takardar PVC Mai Tauri

Ya kamata a tabbatar da juriyar kauri ta ƙarshe, girma, bayyananne, hazo, launi, ƙarewar saman, tauri, tsari da halayen aiki a cikin takaddun da aka amince da su a rubuce.

Takardar PVC mai haske 0.5mm da 1mm

Zaɓin kauri ya kamata ya yi la'akari da tsawon da ba a tallafawa ba, nauyin samfurin, zurfin samar da shi, radius mai lanƙwasa, buƙatar tauri, hanyar bugawa da kayan aiki na haɗawa.

Muhimman Sifofi na Takardun PVC Masu Tsauri Masu Inganci

A Share Ganuwa ta Samfuri

PVC mai haske yana ba da damar samfuran da aka shirya, zane-zanen da aka buga da abubuwan da ke cikin nuni su kasance a bayyane. Hasken ƙarshe ya dogara ne akan resin, tsarin daidaita, abun da aka sake yin amfani da shi, kauri da kuma ƙarewar saman.

Taurin Aiki

PVC mai ƙarfi yana ba da damar riƙe siffar kwalaye masu naɗewa, tagogi masu marufi, allunan nuni, abubuwan da aka ƙera da thermoformed da kuma abubuwan da aka ƙera.

Juriyar Danshi

Faɗin PVC mara ramuka yana da ƙarancin shan ruwa kuma ya dace da aikace-aikacen marufi da nuni da yawa waɗanda ke fuskantar danshi na yau da kullun.

Juriyar Sinadarai

PVC tana jure wa acid, alkalis, mai da sinadarai da yawa. Dacewa ta dogara ne da yawan sinadarai, zafin jiki, lokacin fallasa da kuma matsin lamba na inji.

Bugawa da Ado

Ana iya buga maki masu dacewa, a buga allo, a buga UV, a buga foil, a yi masa ado da lakabi da shafi masu dacewa.

Nadawa da Yankewa

Ana iya yanke PVC mai siffar akwati, a yi masa alama, a yi masa lanƙwasa, sannan a naɗe shi cikin kwalaye masu haske. Tsarin kayan aiki da kuma yadda kayan suke aiki suna shafar farin ciki, tsagewa da ingancin naɗewa.

Ƙarfin Tsarin Thermoforming

Ana iya dumama PVC mai matakin thermoforming kuma a samar da shi zuwa ƙuraje, tire, abubuwan da aka saka a cikin harsashi da kuma abubuwan kariya ta amfani da ingantattun yanayin sarrafawa.

Launuka da Kammalawa na Musamman

Za a iya keɓance launuka masu haske na halitta, masu launin shuɗi, masu haske, launuka marasa haske, masu sheƙi, matte, masu sanyi da kuma waɗanda aka yi wa ado da rubutu.

Takardar PVC mai haske don Nadawa Kwalaye

Ana amfani da PVC mai ƙarfi mai haske don ƙera kwalaye masu naɗewa masu haske don kayan kwalliya, kyaututtuka, kayan wasa, kayan lantarki, kayan rubutu, kayan aiki da sauran kayayyakin dillalai.

• Yanke bayanan kwali, shafuka, ramuka, ƙugiya da ramukan rataye.

• Yin maki da kuma yin ƙulli don naɗe-naɗen madaidaiciya da kusurwoyi da aka ƙayyade.

• Bugawa ta hanyar offset, allo ko UV don yin alama da bayanin samfur.

• Takardar takarda, yin ado da kuma kammala kayan ado.

• Haɗin manne, walda ta ultrasonic ko hanyoyin haɗa filastik masu dacewa.

• Haɗa akwati da hannu ko ta atomatik bayan gwajin kayan aiki.

Masu siye ya kamata su gwada alkiblar takardar, zurfin ƙulli, radius na ninki, farin haske, ƙarfin mannewa da ciyarwa ta atomatik kafin amincewa da samar da yawa.

Takardar PVC mai gaskiya don Bugawa

Ana iya amfani da PVC mai ƙarfi mai haske don marufi da aka buga, alamu, nunin talla, murfin, lakabi da kayayyakin talla. Aikin bugawa ya dogara ne da ƙarfin saman, sinadaran tawada, lanƙwasa takardar da yanayin matsewa.

Ya kamata a gwada manne tawada, yawan launi, bushewa, warkarwa, juriyar karce, toshewa da naɗewa bayan bugawa ta amfani da ƙayyadaddun takardar ƙarshe.

Tsarin Vacuum da Tsarin Thermoforming

Ana iya ƙirƙirar matakan PVC masu ƙarfi waɗanda suka dace su zama tire masu haske, fakitin blister, abubuwan da aka saka a cikin harsashi, murfin kariya da marufi na siyarwa.

Zaɓi Matsayin Thermoforming

Tsarin naɗewa da bugawa na iya ba da irin wannan yanayin tsari kamar matakin thermoforming na musamman. Ya kamata a bayyana aikace-aikacen ƙarshe a cikin ƙayyadaddun bayanin siye.

Daidaiton Dumama Mai Sarrafawa

Dumama mara daidaito na iya haifar da siraran kusurwoyi, ƙusoshin yanar gizo, karkacewa, raunin flanges da kuma rashin daidaiton ma'anar rami.

Kimanta Zurfin Samarwa

Zurfin ramuka suna buƙatar ƙarin rarraba kayan. Ya kamata a zaɓi kauri na farko bisa ga zurfin rami, radius na kusurwa da mafi ƙarancin buƙatun bango da aka gama.

Sarrafa Ƙuntatawa da Sanyaya

Daidaiton abu, zafin mold da lokacin sanyaya na iya shafar girman sassan, lanƙwasa flange da aikin tara kayan.

Cikakken Gwaje-gwajen Inji

Gwada takardar da aka zaɓa akan ainihin injin thermoforming, mold, yankunan dumama da saurin samarwa kafin amincewa da odar.

Yankan, Haɗawa da Ƙirƙira

Yankan da Mutuwa

Ana iya yanke PVC mai tsabta ta hanyar guillotine, yanke wuka, yanke mutu, ko kuma yin amfani da injin. Hanyar da ta dace ta dogara ne da kauri, adadi, buƙatun ingancin gefen da kayan aiki.

Haɗin manne

Yi amfani da manne da aka ƙera don PVC da kuma substrate na biyu. Ya kamata a duba ƙarfin haɗin bayan an goge, tsufa, fallasa yanayin zafi da kuma cika samfurin.

Walda

Ana iya haɗa sassan PVC masu dacewa ta amfani da walda mai yawan mita, walda mai amfani da ultrasonic, walda mai zafi ko wasu hanyoyin da aka tabbatar.

Hakowa da Hudawa

Ya kamata a sarrafa diamita na rami, kaifi na kayan aiki, saurin ciyarwa da nisan da ke tsakanin gefen takardar don rage fashewa da burrs.

PVC mai launin shuɗi, mai santsi da launi

PVC Mai Tsarki na Halitta

Ana zaɓar PVC mai tsabta ta halitta lokacin da ganuwa da kuma gabatarwa mai haske su ne manyan buƙatun.

PVC mai launin shuɗi mai haske

Launi mai launin shuɗi mai sarrafawa zai iya rage yanayin ɗumi na PVC a gani. Ya kamata a amince da launin ƙarshe ta amfani da samfurin samarwa na zahiri.

PVC mai sanyi da matte

Fuskokin da suka yi sanyi da matte suna rage haske, suna ɓoye samfurin kuma suna haifar da bayyanar da bazuwar ko ta musamman.

PVC mai launi mai haske

Ana iya keɓance launuka masu haske kamar ja, rawaya, shuɗi, kore da sauran launuka masu haske bisa ga samfurin jiki ko kuma bayanin launi da aka amince da shi.

Fim ɗin Kariya

Fim ɗin kariya zai iya rage ƙaiƙayi yayin yankewa, bugawa, ƙerawa da jigilar kaya. Ya kamata a daidaita manne fim ɗin da tsarin cirewa da kuma saman PVC.

Takardun PVC da aka fitar da su idan aka kwatanta da na Callender

Ya kamata a zaɓi kayan aiki bisa ga ingancin gani, yanayin sarrafawa da kuma aikin ƙarshe maimakon sunan tsarin samarwa kawai.

PVC da PETG, APET, Acrylic da Polycarbonate

Aikace-aikacen Takardun PVC Masu Tsauri Masu Inganci

• Akwatunan naɗewa: Kwalaye masu tsabta don kayan kwalliya, kyaututtuka, kayan wasa, kayan lantarki, kayan aiki da kayayyakin dillanci.

• Tagogi masu marufi: Tagogi masu haske don kwalaye na takarda da akwatunan da aka buga.

• Marufi mai siffar thermoformed: Blisters, tires, abubuwan da aka saka a cikin harsashi da murfin kariya.

• Bugawa: Zane-zanen da aka buga da offset, zane-zanen da aka buga da allo, lakabi da kuma allunan ado.

• Nunin Kasuwanci: Abubuwan da aka saka a wurin sayarwa, nunin shiryayye, alamu da allunan talla.

• Kayan rubutu: Murfi, rabe-raben abubuwa, kayan ɗaurewa da kayayyakin kariya daga takardu.

• Ƙirƙirar masana'antu: Abubuwan da aka saka na kariya, masu rabawa, samfura, masu kariya da sassan da aka yanke musamman.

• Marufi mai tsari: Sai lokacin da aka samar da takardar shaidar cancanta da takamaiman samfura.

Bincika ƙarin Kayayyakin takardar PVC masu tsabta don marufi, bugawa, naɗewa da aikace-aikacen thermoforming.

Bukatun Marufi da Abinci

Bai kamata a bayyana takardar PVC ta masana'antu ta atomatik a matsayin wadda ta dace da hulɗa kai tsaye da abinci, marufi na magunguna ko marufi na na'urorin likitanci ba.

Dacewa ya dogara ne da ainihin resin PVC, mai daidaita aiki, mai shafawa, mai gyara tasirin, launi, matakin abubuwan da aka sake amfani da su da kuma sarrafa masana'antu.

Masu siyan da ke buƙatar kayan da abinci ya shafa ya kamata su ƙayyade kasuwar da za su je, nau'in abinci, lokacin da za su yi hulɗa, zafin jiki, tsarin yin hulɗa da shi da kuma ko PVC ɗin ya yi hulɗa da samfurin kai tsaye.

Marufin magunguna da na likitanci na iya buƙatar ƙarin iko don tsari, tsafta, aikin shinge, gano abubuwa da kuma takardun ƙa'idoji.

Takaddun shaida na tsarin gudanarwa na RoHS da ISO ba sa maye gurbin gwajin abinci, magunguna ko na likita na takamaiman samfura.

Juriyar UV da Amfani da Waje

Ana ba da shawarar PVC mai haske mai haske musamman don marufi na cikin gida, bugawa, nunawa da ƙera shi.

Shafar hasken rana na dogon lokaci na iya shafar haske, launi, ƙarfin tasiri da kuma bayyanar saman. Ayyukan waje ya kamata su ƙayyade tsarin da ke daidaita hasken UV da kuma gwajin yanayi da ake buƙata.

Ya kamata a samar da yanayin da ake tsammani, ƙarfin hasken rana, yanayin zafin jiki, hanyar shigarwa da tsawon lokacin sabis da ake buƙata kafin a zaɓi kayan.

Zaɓuɓɓukan Takardar PVC Mai Rage Wuta

Bai kamata a tallata takardar PVC mai haske da takamaiman rarrabuwar wuta ko harshen wuta ba sai dai idan an gwada ainihin tsari da kauri bisa ga ƙa'idar da ake buƙata.

Masu siye ya kamata su samar da hanyar gwajin da aka yi niyya, ƙimar da ake buƙata, kauri, launi, yanayin da aka tsara da kuma aikace-aikacen ƙarshe.

Bai kamata a yi amfani da kalmar 'mai hana wuta' ba saboda takardar filastik na iya ci gaba da ƙonewa, laushi, narkewa, hayaƙi ko kuma rasa ingancin injina yayin da ake fallasa wuta.

PVC mai ɗauke da kayan da aka sake amfani da su

Takardun Bayanan Takardar PVC Mai Tsauri Mai Sauƙi

Sauke takardun fasaha da ake da su don amfani. Tabbatar cewa kowace takarda ta shafi ainihin kauri, matakin resin, launi, kammala saman, matakin abun ciki da aka sake yin amfani da shi da kuma rukunin samarwa da ake odar sa.

   Sauke Takardar Bayanan Takardar PVC Mai Gaskiya

   Sauke Rahoton Gwajin Takardar PVC Mai Gaskiya

Gwaje-gwajen Kula da Inganci da Aka Ba da Shawara

• Tabbatar da kayan aiki da tsari.

• Juriyar kauri da kauri.

• Faɗi, tsayi, murabba'i da kuma haƙurin yankewa.

• Bayyanar da haske, hazo, sheƙi, launi da kuma daidaiton launin shuɗi.

• Karce-karcen saman, alamun ruwa, tabo baƙi, gels da ƙazanta.

• Faɗin takardar, lanƙwasa, lanƙwasa birgima da ingancin gefen.

• Buga mannewa, bushewa, warkarwa da juriyar karce.

• Naɗewa, yin fari da kuma aiki mai ƙarfi.

• Ƙarfin haɗin gwiwa mai mannewa ko wanda aka haɗa.

• Ragewar thermoforming, ma'anar rami da kuma rarrabawar bango.

• Tasiri, huda da kuma aikin sassa da aka ƙera.

• Marufi, lakabi, kariyar pallet da kuma bin diddigin tsari.

Zaɓuɓɓukan Takardar PVC ta Musamman

• Kauri mai kyau na 0.5mm da 1mm.

• Ƙarin kauri daga kimanin 0.05mm zuwa 6.5mm.

• Nau'in birgima, na'urorin yankewa, zanen gado mai faɗi da kuma guntun da aka yanka bisa girman da aka saba.

• Launuka masu haske, shuɗi-launin halitta, launuka masu haske da launuka marasa haske.

• Fuskokin suna da sheƙi, matte, da santsi, masu laushi da kuma laushi mai laushi.

• Tsarin da aka yi amfani da shi a matsayin bugu, akwatin da kuma tsarin thermoforming.

• Resin-Virgin ko kuma zaɓaɓɓun tsarin abubuwan da aka sake yin amfani da su.

• An gyara tasirinsa ta hanyar hana ƙura, an daidaita shi ta hanyar amfani da hasken UV, kuma an gwada shi ta hanyar amfani da matakan hana ƙura.

• Fim ɗin kariya, takarda mai layi tsakanin layuka da kuma marufi na musamman.

• Samfura don gwaji na bugawa, naɗewa, haɗawa da kuma gwajin thermoforming.

Bayanin da ake buƙata don Ƙimar Kuɗi

• Kauri da haƙuri da ake buƙata.

• Faɗin birgima, girman takardar ko girman yanke da aka gama.

• Nauyin birgima, diamita, tsakiya da kuma alkiblar lanƙwasa.

• Launi mai haske, shuɗi-launin halitta, ko kuma launin da ba a iya gani.

• Mai sheƙi, matte, mai sanyi, mai embossed ko wani saman.

• Bugawa, naɗewa, taga, thermoforming ko aikace-aikacen ƙira.

• Firinta, tawada, manne, mold ko converting-bayanan kayan aiki.

• Bukatar abun ciki na budurwa ko sake yin amfani da shi.

• Bukatun hulɗa da abinci, RoHS, REACH, UV ko buƙatun ƙimar harshen wuta.

• Adadin gwaji, odar farko da kuma adadin shekara-shekara.

• Marufi, fale-falen fale-falen, tashar jiragen ruwa da aka nufa da kuma ranar da za a kawo.

Aika Bukatun Takardar PVC Mai Kyau

Hotunan Tsarin Masana'antu

Marufi da Isarwa

Marufi na yau da kullun: Ana iya amfani da takardar Kraft, fim ɗin PE, jakunkunan kariya, kwali da pallets na fitarwa don kare zanen gado da birgima.

Tushen Naɗi: Ana iya samar da ƙwanƙolin takarda mai tsawon mm 76 don samfuran naɗi, gwargwadon ƙayyadaddun naɗin ƙarshe.

Samfurin marufi: Za a iya saka zanen A4, kayan da aka keɓance ko ƙananan biredi a cikin jakunkuna masu kariya, akwatuna ko kwali.

Marufi na takarda: Nauyin fakitin tunani shine kimanin kilogiram 30 ko kuma ana iya keɓance shi bisa ga girma da buƙatun sarrafawa.

Marufin fale-falen: Ana iya ɗora kimanin kilogiram 500-2,000 a kan fale-falen plywood, ya danganta da girman takardar ko birgima.

Lodawa a cikin kwantena: Lodawa ta hanyar amfani da na'urar aunawa tana da nauyin tan 20, wanda ya danganta da girma, tsarin pallet da kuma iyakan nauyin doka.

Marufi na musamman: Ana iya tattauna lakabi, tambari, alamun kwali, fim mai kariya da marufi mai lakabin sirri.

Lokacin jagora: Tsarin samarwa na yau da kullun yana ɗaukar kimanin kwanaki 10-14 bayan ƙayyadewa, adadi, marufi da tabbatar da biyan kuɗi.

Takaddun Shaida da Takardun Bin Dokoki

Takardun da ake da su na iya haɗawa da rahotannin gwajin samfura, takardun da suka shafi RoHS, takardar shaidar ingancin ISO 9001 da takardar shaidar kula da muhalli ta ISO 14001.

Masu siye ya kamata su tabbatar da waɗanne takardu ne suka shafi ainihin tsari, kauri, launi, matakin abubuwan da aka sake yin amfani da su da kuma ƙayyadaddun samarwa.

Takaddun shaida na tsarin gudanarwa na ISO ba sa tabbatar da bin ƙa'idodin hulɗa da abinci, magunguna, likitanci, yanayi a waje ko rarraba harshen wuta.

Me Yasa Za Ka Zabi HSQY A Matsayin Mai Kaya Takardar PVC Mai Kyau?

Kamfanin HSQY Plastic Group yana samar da zanen PVC mai haske, kayan akwatin naɗewa, zanen PVC da za a iya bugawa, kayan thermoforming, zanen PET, zanen PP da kuma kayayyakin marufi na musamman.

• Takardun PVC masu haske na 0.5mm da 1mm an yi su ne da fata mai sheƙi.

• Biredi, zanen gado na yau da kullun da kuma kayan da aka yanke musamman.

• Zaɓuɓɓuka masu haske, shuɗi-launin shuɗi, masu launi, matte da launuka masu sanyi.

• Bugawa, naɗewa-akwatin da kuma matakan thermoforming.

• Faɗi, tsayi, nauyin birgima da kuma jurewa na musamman.

• Fim ɗin kariya da marufi mai lakabin sirri.

• Samfura don gwaje-gwajen bugawa, naɗewa da ƙirƙirar su.

• Tallafin fasaha-takardu da isar da kaya zuwa ƙasashen waje.

Kafin a samar da adadi mai yawa, HSQY yana ba da shawarar a gwada takardar da aka zaɓa ta amfani da firintar mai siye, tawada, kayan aikin yankewa, manne, kayan naɗewa, injin thermoforming ko tsarin ƙera.

Tuntuɓi HSQY don Samfura da Farashi

Nunin Duniya na HSQY

Tambayoyin da Ake Yawan Yi Game da Takardun PVC Masu Tsauri Masu Inganci

Menene takardar PVC mai ƙarfi mai haske?

Kayan polyvinyl chloride ne mai haske, mai tauri wanda ake amfani da shi wajen naɗe akwatunan naɗewa, tagogi masu marufi, bugawa, nuni, samar da injin tsotsa, samar da zafi da kuma abubuwan da aka ƙera na filastik.

Mene ne bambanci tsakanin takardar PVC ta 0.5mm da 1mm?

Takardar 0.5mm ta fi sauƙi kuma ta fi sauƙin naɗewa ko kuma ta yi laushi. Takardar 1mm ta fi tauri kuma tana ba da tallafi mai ƙarfi ga nunin faifai, sassan da aka ƙera da kuma manyan tsarin marufi.

Za a iya samar da takardar PVC mai haske a cikin birgima?

Eh. Ana iya samar da manyan biredi da biredi masu yankewa tare da faɗin da aka keɓance, diamita na biredi, nauyin biredi, tsakiya da kuma alkiblar biredi.

Waɗanne girman takardar da ake da su?

Girman da aka saba amfani da shi sun haɗa da 700 × 1000mm, 915 × 1830mm da 1220 × 2440mm. Hakanan ana samun girman da aka yanke musamman.

Za a iya amfani da zanen PVC masu tsabta don naɗe akwatunan naɗewa?

Eh. Ana iya buga PVC mai kyau a cikin akwati, a yanke shi, a yi masa alama, a naɗe shi, sannan a haɗa shi cikin kwalaye masu tsabta.

Za a iya buga zanen PVC mai haske?

Ana iya daidaita ma'aunin da aka zaɓa, a buga a allo ko a buga a UV. Ya kamata a gwada tawada, maganin saman, warkarwa da mannewa kafin a samar da taro.

Za a iya yin amfani da takardar PVC mai ƙarfi a yanayin zafi?

Eh. Ana iya ƙirƙirar PVC mai siffar thermoforming zuwa tire, ƙuraje, abubuwan da aka saka da kuma marufi masu kariya. Dole ne a gwada dumama, ƙirar ƙira, zurfin jawowa da sanyaya.

Za a iya yanke takardar PVC mai haske ta hanyar laser?

Sarrafa PVC ta hanyar amfani da laser zai iya fitar da hayaki mai guba da kuma haɗari wanda ke ɗauke da sinadarin chlorine kuma yana iya lalata kayan aiki marasa dacewa. Ana fifita hanyoyin yankewa na inji, yankewa ko CNC sai dai idan an tsara wani tsari na musamman don PVC kuma an bi ƙa'idodin tsaron gida.

Wane manne ya kamata a yi amfani da shi don PVC mai tsabta?

Yi amfani da manne da aka ƙera don PVC da kuma substrate na biyu. Ya kamata a gwada manne na farko, ƙarfin haɗin ƙarshe, tsufa, zafin jiki da kuma bayyanarsa.

Shin PVC mai haske mai ƙarfi ya dace da marufin abinci?

Ya kamata a yi amfani da matakin da abinci ya shafa wanda ke da takaddun da suka dace. Dacewa ya dogara ne da tsarin abinci, nau'in abinci, zafin jiki, tsawon lokaci da buƙatun kasuwa zuwa inda za a je.

Shin RoHS yana nufin cewa PVC ba shi da haɗari ga abinci?

A'a. RoHS tana magance ƙayyadadden abubuwa don samfuran lantarki da na lantarki masu dacewa. Ba ya maye gurbin gwajin ko sanarwa game da ƙaura tsakanin abinci da abin da ya shafi abinci.

Shin PVC mai haske ya dace da marufi na magunguna?

Marufi na magunguna yana buƙatar takamaiman matsayi, sarrafawar samarwa da takaddun shaida na musamman kan inganci da ƙa'idodi na aikace-aikace.

Shin akwai takaddun PVC masu jure wa UV?

Ana iya kimanta tsarin da aka daidaita da hasken UV. Bai kamata a ɗauka cewa PVC mai haske na yau da kullun yana ba da juriya ga yanayi na dogon lokaci a waje ba.

Akwai zanen PVC masu haske waɗanda ke hana harshen wuta?

Ana iya samun maki masu hana harshen wuta da aka gwada. A samar da mizanin gwajin da ake buƙata, ƙima, kauri, launi da kuma amfani na ƙarshe.

Za a iya amfani da PVC da aka sake yin amfani da shi a cikin zanen gado mai haske?

Za a iya samun zaɓaɓɓun hanyoyin da aka sake yin amfani da su. Abubuwan da aka sake yin amfani da su na iya shafar tsabta, launi, ƙazanta da kuma daidaiton sarrafawa.

Shin za a iya sake yin amfani da PVC mai haske?

Sake amfani da kayan ya dogara ne da tarin PVC na gida, girman samfurin, launi, bugu, lakabi, manne, gurɓatawa da kuma ƙirar samfurin da aka gama.

Ana samun samfuran PVC masu haske?

Za a iya samun zanen gado na A4, kayan da aka keɓance ko samfuran nadi masu iyaka don duba tsabta, kauri, bugu, naɗewa, haɗawa da kuma samar da thermoforming.

Menene MOQ?

Matsakaicin MOQ shine kimanin kilogiram 1,000. Launuka na musamman, faɗi marasa tsari, tsari mai aiki da marufi na musamman na iya buƙatar ƙaramin adadin daban.

Menene lokacin samar da jagora?

Tsarin samarwa na yau da kullun yakan ɗauki kimanin kwanaki 10-14 bayan an tabbatar da ƙayyadaddun bayanai, adadi, marufi da biyan kuɗi.

Wane bayani ake buƙata don yin ƙiyasin farashi?

Bayar da kauri, girma, yawa, launi, kammala saman, fom ɗin samarwa, aikace-aikace, hanyar bugawa ko ƙirƙirar abubuwa, takardu da ake buƙata, marufi da inda za a je.

Sami Takardar Shaidar PVC ta Musamman Mai Kyau

Game da Ƙungiyar Roba ta HSQY

Kamfanin HSQY Plastic Group yana samar da zanen PVC mai haske, kayan PVC masu bugawa, zanen akwatunan naɗewa, zanen thermoforming, zanen PET, zanen PP da samfuran marufi na musamman.

HSQY tana tallafawa masu sauya marufi, firintoci, masana'antun thermoforming, masu samar da nuni, masu shigo da kaya da masu rarrabawa tare da girma na musamman, launuka, saman, samfura, takardun fasaha, marufi na fitarwa da samar da kayayyaki da yawa.

Nemi Ƙimar da Samfura