0.5 mm PVC takardar abu mai sanyi

0.5mm Frosted PVC takardar don Bugawa, Inuwar Fitila da Nuni

HSQY 0.5mm frosted PVC takardar abu wani abu ne mai tauri ko rabin-tauri na polyvinyl chloride tare da saman matte da haske. Kammalawar frosted tana watsa hasken da aka watsa, tana rage hasken saman kuma tana ɓoye abubuwan da ke bayan takardar abu yayin da take kiyaye kamannin ado mai tsabta.

Kauri mai girman 0.5mm yana ba da daidaito mai amfani tsakanin sassauci da kwanciyar hankali na girma. Ana iya yanke shi, yanke shi, sanya masa maki, naɗe shi, bugawa, sanya shi a kan laminate kuma ya zama layin inuwar fitila, nunin kayan sayarwa, abubuwan da aka saka a cikin marufi, allunan sirri, rufin ado, alamu da kayan aikin DIY.

HSQY yana samar da kauri mai kauri da matte PVC takardar abu s daga 0.1mm zuwa 2mm. Girman takardar abu na yau da kullun ya haɗa da 700x1000mm, 750x1050mm, 915x1830mm da 1220x2440mm, tare da girma dabam dabam da ake da su don masu sauya marufi, firintoci, masana'antun haske, kamfanonin nunin faifai da masu ƙera masana'antu.

Za a iya tattauna tsare-tsare na musamman da zaɓuɓɓukan saman don takamaiman buƙatun bugawa, hana tsangwama, yaɗuwar haske, juriya ga UV ko aikin harshen wuta. Ya kamata a tabbatar da aikin ƙarshe ta amfani da samfura da rahotannin gwaji na musamman na aikace-aikace.

Bidiyon 0.5mm mai sanyi PVC takardar

Hotunan da aka yi wa sanyi PVC takardar

Takardun Fasaha da aka Frosted PVC takardar

Bayani dalla-dalla 0.5mm Mai Sanyi PVC takardar

Menene Frosted PVC takardar ?

Frosted PVC takardar abu filastik ne mai haske takardar abu tare da matte ko saman rubutu wanda ke watsa hasken da aka watsa. Ba kamar haske mai haske PVC ba, ba ya samar da cikakken haske ta cikin kayan.

Bayyanar da aka watsa na iya rage haske, rage hasken da ba a gani ba da kuma abubuwan da ba a gani ba ko cikakkun bayanai na gani a bayan takardar abu . Daidaiton haske, hazo, watsa haske da matakin sirri ya dogara ne akan kauri takardar abu , yanayin saman, launi da tsari.

Muhimman Siffofi na Frosted PVC takardar s

Zaɓin Kauri Mai Sanyi PVC takardar

Zaɓin kauri na ƙarshe ya kamata ya yi la'akari da girman faifan, tsarin tallafi, radius mai lanƙwasa, tsarin bugawa, tushen haske, nauyin samfur da kuma taurin da ake buƙata. Ya kamata a tantance samfuran kafin a samar da su a kasuwa.

Amfani da 0.5mm Frosted PVC takardar s

• Inuwar fitilu: Inuwar ganguna, inuwar fitilun da aka ɗaure, fitilun teburi da kayan ado masu ba da haske.

• Bugawa da kuma alamun rubutu: Alamun da aka buga, zane-zanen baya, abubuwan da aka saka a cikin akwatin haske, zane-zanen nuni da kuma allunan talla.

• Nunin Kayayyaki: Abubuwan da aka saka a cikin nunin samfura, zane-zanen shiryayye, abubuwan da aka haɗa a cikin baje kolin da kuma allunan tallan gani.

• Marufi: Akwatunan naɗewa masu sanyi, tagogi masu marufi, hannayen riga, abubuwan sakawa da kayan kwalliya na ado.

• Abubuwan da aka saka a sirri: Abubuwan da aka saka a kan gani masu sauƙi don raba ofisoshi masu firam, ƙofofin kabad da allon ado.

• Kayan ado na ciki: Rufe bango, allunan ado masu haske, fasalulluka na ɗaki da kayan daki.

• Ayyukan DIY da na sana'a: Yin samfura, stencils, murfin ado, fitilun hannu da samfuran kerawa na musamman.

An yi sanyi PVC takardar don inuwar fitila

Frosted PVC zai iya rage hasken daga LED ko wani tushen haske mai ƙarancin zafi kuma ya rage ganin kwan fitila kai tsaye. Kauri mai girman 0.5mm za a iya lanƙwasa shi zuwa tsarin inuwar fitilar ganga, silinda da kuma mazugi yayin da yake samar da goyon baya mai ƙarfi ga masaka, takarda ko yadudduka na ado da aka buga.

Ya kamata masana'antun inuwar fitila su gwada watsa haske, hazo, zafin launi, fallasa zafi, dacewa da mannewa da kuma aikin harshen wuta tare da ƙirar fitilar ƙarshe. Bai kamata a sanya daidaitaccen PVC a cikin hulɗa kai tsaye da kwararan fitila masu zafi ko abubuwan da ke da zafi mai yawa ba.

Aikin Bugawa da Alamomi

Fuskar matte za ta iya samar da bango mai ƙarancin haske don zane-zanen da aka buga, alamu da allunan nuni. Dangane da matakin PVC da kuma yadda aka yi amfani da su a saman, takardar abu na iya dacewa da buga allo, buga UV, buga dijital ko laminating na ado.

• Tabbatar da daidaiton tawada da mannewa kafin a samar da taro.

• Kimanta yawan launi saboda asalin da aka yi masa fenti zai iya shafar bayyanar launin da aka buga.

• Gwada juriyar karce, yanayin warkarwa da kuma aikin naɗewa bayan bugawa.

• A ƙayyade maganin corona, primer ko shafi mai bugawa idan ana buƙata.

• Tabbatar ko takardar abu za a yi amfani da shi a gaban kwamfuta, ko a yi amfani da shi a baya ko kuma ba tare da an yi amfani da shi ba.

Amfani a cikin Rarrabawa da Fannin Sirri

0.5mm PVC takardar abu yawanci siriri ne da ba zai iya zama babban bangare na tsarin da ke tsaye ba. Ya fi dacewa da shi azaman abin saka sirri na ado, allon da aka yi da firam, rufin saman ko kayan da aka yi wa laminated wanda aka tallafa da firam mai tauri ko substrate.

Ga manyan masu raba ofis, sassan kasuwanci ko allon tsaro, masu siye ya kamata su kimanta kauri PVC , acrylic, PETG , polycarbonate ko wani mai tauri takardar abu bisa ga girman panel, buƙatun tasiri da tazara mai goyan baya.

Sarrafawa da Ƙirƙira

• Yanke wuka, yanke guillotine da yanke mutu don siffofi na musamman.

• Naushi da haƙa ramuka, shafuka da fasalulluka na hawa.

• Sakamako da naɗewa don marufi, murfi da tsarin nuni.

• Samar da zafi da kuma samar da thermoforming ga abubuwan da ke lanƙwasa ko siffofi.

• Bugawa, laminating da haɗin manne bayan gwajin jituwa.

• Dinki, riveting, stapling ko mannewa na inji don zaɓaɓɓun samfuran da aka canza.

Abubuwan da Za a Yi La'akari da Amfani da su a Cikin Gida da Waje

Ana ba da shawarar yin amfani da daidaitaccen frosted PVC takardar abu musamman don marufi na cikin gida, nuni, bugawa, haske da aikace-aikacen ado. Shafawa ga hasken rana, zafi da yanayi na dogon lokaci na iya shafar launi, sassauci, ƙarfin tasiri da kuma bayyanar saman.

Ayyukan waje ya kamata su ƙayyade tsarin da ke jure wa yanayi ko kuma wanda ke jure wa hasken rana, sannan su tabbatar da tsawon lokacin da ake tsammani na aiki ta hanyar gwajin amfani. Bai kamata a ɗauki juriyar yanayi da juriyar rawaya a matsayin matakin da ake buƙata a cikin gida ba.

Zaɓuɓɓukan da aka yi wa ado na musamman PVC takardar

HSQY yana tallafawa ayyukan PVC takardar abu na musamman don masana'antun haske, masu sauya marufi, firintoci, kamfanonin alamu, masu samar da kayan ado na ciki, masana'antun nuni da masu rarraba filastik.

• Kauri na musamman daga 0.1mm zuwa 2mm.

• Faɗi, tsayi da kuma juriyar yankewa na musamman takardar abu .

• Tasirin saman da aka yi da santsi, matte, ko kuma wanda aka yi da fenti ko kuma wanda aka yi da fenti na musamman.

• Bayyananne, mai haske, fari, mai launi ko launin shuɗi.

• Tsarin da za a iya bugawa, antistatic, wanda aka gyara shi, wanda aka daidaita da UV ko kuma wanda ke hana harshen wuta.

• Fim ɗin kariya, yanke takardar abu , shirya fakiti da kuma shirya kayan fitarwa na musamman.

Yadda Ake Ƙayyade 0.5mm Frosted PVC takardar don Ƙimar Bayani

Domin zaɓar kayan da sauri da kuma samun ƙarin bayani game da farashi mai kyau, a bayar da cikakkun bayanai na fasaha da kasuwanci a ƙasa. Wannan yana taimaka wa HSQY tabbatar da ko daidaitaccen ma'aunin 0.5mm mai sanyi ya dace ko kuma ana buƙatar zaɓin saman da aka keɓance, tsari ko sarrafawa.

• Girma: kauri, faɗin takardar abu , tsawon takardar abu da juriyar yankewa.

• Bukatun gani: haske mai haske, fari mai haske, launi, watsa haske, hazo ko matakin sirri.

• Bukatun saman: fim ɗin da aka yi da frosted na gefe ɗaya ko biyu, matte, embossed, wanda za a iya bugawa ko kariya.

• Hanyar sarrafawa: bugawa, yankewa, naɗewa, laminating, thermoforming, punching ko manne bonding.

• Amfani da ƙarshen: inuwar fitila, nuni, akwatin naɗewa, alama, kayan ado ko wani samfurin da aka ƙera.

• Bayanin oda: adadin gwaji, buƙatun shekara-shekara, hanyar tattarawa, tashar jiragen ruwa da ake buƙata da takaddun bin ƙa'idodi.

Frosted PVC takardar vs Clear da Opaque PVC takardar

Shiryawa da Isarwa

Takaddun shaida da Takardun Inganci

Takardun da ake da su na iya haɗawa da rahotannin SGS, takardar shaidar ISO 9001:2008 da kuma bayanan gwaji na musamman game da samfur. Ya kamata masu siye su tabbatar da waɗanne takardu ne suka shafi ainihin kauri, launi, yanayin saman, tsari da kuma rukunin samarwa.

Nunin Duniya

Samarwa da Shiryawa

Tambayoyin da Ake Yawan Yi Game da 0.5mm Frosted PVC takardar s

Game da Ƙungiyar Roba ta HSQY