Hetah hian i awm: In » CPET Tray hmanga siam a ni » 3CP CPET Trays

3CP CPET Tray te a awm bawk

3 Compartment CPET Trays siamtute chuan chaw ei tur peihfel vek tur

HSQY hian compartment 3 compartment CPET tray a pe chhuak a ni. frozen ready meals, chilled prepared foods, airline catering, hospital, school, central kitchen, Meals on Wheels, contract catering leh industrial meal-packing line te dahna tur Tuna category hman mek zingah hian rectangular black CPET tray model sawm, nominal capacities 22 oz atanga 47 oz thleng a awm a ni.

Three-cavity layout hi protein emaw entrée emaw, buh emaw alu emaw ang chi starch, leh thlai, sauce, dessert emaw a sir dang emaw atan siam a ni. Crystallized polyethylene terephthalate hian filling, heat sealing, chilling emaw freezing emaw, transportation, microwave reheating, conventional oven reheating leh direct serving atana mamawh thermal stability a pe a ni.

Chhanna rang: 3CP CPET tray chu dual-ovenable food tray a ni a, cavities pathum siam a ni. Complete-meal portion control leh organized presentation a support a, mahse divider te hi automatic-in liquid-tight anga sawi tur a ni lo va, ei tur hrang hrang pathum chu uluk taka reheating validation a ngai thei bawk.

Tuna HSQY 3CP CPET Tray Range hman mek

A hnuaia table hian tuna HSQY-in model-specific information a tihchhuah mekte a hmang a ni. Final dimensions, capacity, weight, case pack leh MOQ te chu approved drawing nen hian confirm tur a ni a, a chhan chu product page hlui thenkhatah chuan secondary specification inmil lo a awm avangin.

Model	Nominal Capacity	Published Dimensions	Tray Rih zawng	Case Pack	A hman dan tlangpui
Model JC03 a ni	22 oz a ni	8.50 × 6.40 × 1.49 in a zau a ni	32 g a ni	720	Compact complete meals, airline leh institutional portion te pawh a awm bawk
Model HS09 a ni	22 oz a ni	8.50 × 6.40 × 1.49 in a zau a ni	32 g a ni	720	Airline, frozen leh catering ei tur te pawh a awm bawk
Model 025 a ni	23 oz a ni	8.46 × 6.36 × 1.50 in a zau a ni	30 g a ni	600	Chaw ei tur peih tawh te te leh portion-controlled programme te
Model 015 a ni	25 oz a ni	8.50 × 6.46 × 1.50 in a zau a ni	33 g a ni	360	Retail ready meal leh frozen meal set te pawh a awm bawk
Model 017 a ni	25 oz a ni	8.46 × 6.36 × 1.50 in a zau a ni	30 g a ni	600	Chaw pek chhuah leh freezer atanga oven thlenga chaw ei tur
Model 008 a ni	Category listing-ah 25 oz a awm a; product body pawhin 27 oz	8.46 × 6.38 × 1.72 in a zau a ni	32 g a ni	600	Ready meals entrée leh side pahnih nei; approved capacity chu nemnghet rawh
Model 006 a ni	27 oz a ni	8.46 × 6.38 × 1.72 in a zau a ni	32 g a ni	600	Central kitchen, airline leh foodservice te ei tur a awm bawk
Model 012 a ni	27 oz a ni	8.50 × 6.46 × 1.85 in a zau a ni	33 g a ni	600	Deep frozen chaw leh institutional portion te pawh a awm bawk
Model 005 a ni	34 oz a ni	8.94 × 7.01 × 1.73 in a zau a ni	32 g a ni	600	Supermarket lian medium leh frozen meal te pawh a awm bawk
Model HS18 a ni	47 oz a ni	8.50 × 6.46 × 1.97 in a zau a ni	32 g a ni	360	Institutional, airline leh high-volume meal pack lian tak tak a awm bawk

Tuna model header tam zawk hian order quantity tlem berah 50,000 pieces an tichhuak thin. Detailed section thenkhatah chuan unit hrang hrang emaw, a tlem zawk emaw an hmang a, chuvangin final quotation-ah chuan MOQ hi pieces, kilograms, cartons emaw trial production quantity-a teh a nih leh nih loh a hriat chian tur a ni.

A tlangpuiin 3 Compartment CPET Tray chungchang sawifiahna

Item	Typical HSQY duhthlan tur
Bungrua	CPET, crystallized polyethylene terephthalate hmanga siam a ni
Ruangam	Rectangular tray pakhat chhungah ei tur hmun pathum a lo awm
Tuna Capacity Range awm mek	22–47 oz vel a ni
Tuna Shape awm mek	Rectangular ang mai a ni
Tuna Color awm mek	Dum; white, natural emaw custom color emaw chu project review theih a ni
Temperature Range tihchhuah tawh	Model thlan bikte: -40°C atanga +220°C vel
Heating hman dan tur	Microwave leh oven pangngai hman thiam
Dahthatna	Chilled, refrigerated leh frozen-a dah te chu validation hnuah hman tur a ni
Sealing tih a ni	Easy-peel, weld-seal, anti-fog leh printed CPET lidding film thlan bikte nen a inmil thei
Case Pack tihchhuah tawh	Model a zirin tray 360–720 vel a ni
MOQ tihchhuah a ni	A tlangpuiin 50,000 vel a ni a; model leh customization hmanga nemnghet
Customization hmanga siam a ni	Dimension, depth, total capacity, three-cavity ratio, rawng, logo, film leh export packing te a awm bawk

Engvangin Nge Three-Compartment CPET Tray hi kan hman?

Complete-meal layout: Package pakhatah hian protein, starch leh thlai chi hrang hrang emaw, menu dang pathum awmna emaw a awm thei.
Portion control: Cavity tin hian manual emaw automatic filling line-ah ei tur rit zawng repeatable a support a.
Organized presentation: Chaw ei tur chu chilled emaw frozen emawa sem chhuah laiin hmuh theihin a inthen reng thin.
Menu standardization: Damdawi in, sikul, airlines leh nutrition target mumal tak nei meal-delivery programme atan a tangkai hle.
Freezer-to-oven workflow: Tray thiam tak takte hian microwave emaw oven pangngaiah emaw cold storage leh direct reheating a support thei a ni.
Sealable format: Film inmil tak takte hian faina, lirthei, branding leh retail presentation te a thlawp a ni.
Wide portion range: Compact 22–25 oz format leh a lian zawk 27–47 oz meal pack a awm.

Limitation pawimawh: Formed divider hian ei tur a buatsaih a, mahse automatic-in liquid-tight a ni lo. Tray tilt, overfilled, frozen, vibrated emaw reheated emaw a nih chuan thin sauce, gravies leh oil te hi cavities inkar ah an kal thei a ni.

Three-Compartment Ratio Design dan tur

Total ounce capacity hian cavity tin hman theih volume a tichiang lo. Technically suitable 3CP tray chu ei tur chi hrang hrang nen a inmil tur a ni a, chaw ei zawng zawng nen a inmil tur a ni.

Meal map siam rawh: Protein, starch leh thlai emaw side component emaw ziak rawh.
Target weights record: Cavity tin tan minimum, target leh maximum grams te sawifiah rawh.
Chaw ei zat dik tak teh rawh: Sa, buhfai, mashed potato, thlai leh sauce te hian density hrang hrang an nei a.
Primary cavity set: Cavity lian ber chu entrée emaw food component pawimawh ber emaw ah dah rawh.
Secondary cavities pahnih size: Side dish tinte chu compression emaw headspace tam lutuk emaw awm lovin a fit tih finfiah rawh.
Maximum fill levels set: Chaw ei tur chu divider ridge hnuaiah dah la, sealing surface atanga hla takah dah rawh.
Liquid movement test: Sauce leh juices te endik nan filled tray te chu tilt leh vibrate rawh.
Validate reheating: Chaw pathumte hian a tlem ber pawh lum lutuk lovin a mamawh temperature an thleng vek tih finfiah rawh.

Compact, Standard leh Large 3CP Tray thlan theihna

Tray Class	Typical Capacity	Advantages	Thlanna hlauhawmna	Representative Models
Compact a ni	22–23 oz vel a ni	Portion control tha tak leh carton density tha tak.	Chaw bulky leh sauce siamna tur headspace tlem.	JC03, HS09 leh 025 te a ni
Nihphung pangngai	25–27 oz vel a ni	Retail, frozen leh institutional chaw ei tur atana footprint inthlau tak.	Chaw pathum hi rate hrang hrangin a lum thei.	015, 017, 008, 006 leh 012 te a ni
Medium-Large a ni	34 oz a ni	Chaw ei tam zawk leh ei tur thuk zawk.	Reheating hun rei zawk leh case count tihtlem.	005
Hrawl	47 oz a ni	Institutional, airline emaw catering portion lian zawk tan pawh a tha.	Filled weight sang zawk, stack load leh heating complexity a sang zawk.	HS18 a ni

3CP CPET Tray hman dan tur

Retail Ready Meals leh Frozen Food te pawh a awm bawk

Protein, buhfai leh thlai ei tur set
Frozen entrées leh side dish pahnih a awm bawk
Supermarket-a chaw ei tur chilled tak tak
Meal-prep leh calorie control theih thil chi hrang hrang
Private-label freezer atanga oven thlenga chaw ei tur

Healthcare, School leh Institutional Catering lam a ni

Damdawi in leh healthcare chaw ei tur
School leh university-a chaw ei tur programme hrang hrang neih a ni
Senior-care chaw ei tur a ni
Chaw ei tur chu Wheels-ah a awm
Factory leh corporate canteen-a chaw ei tur

Airline leh Railway Catering te a ni

In-flight chaw ei tur entrée leh side pahnih nen
Economy leh premium catering chaw ei tur a awm bawk
Rel kawng chaw ei tur service
Transport catering ei tur dah fel vek a ni
HS18 model hmanga airline chaw ei tur format lian tak tak

Food Delivery leh Central Kitchen te pawh a awm bawk

Centralized chaw siam chhuah
Contract hmanga ei leh in tur
Delivery chaw ei tur (ready-to-reheat) te
Khawtlang ei leh in programme hrang hrang
Institutional distribution lian tak tak a awm

3CP vs 1CP leh 2CP CPET Tray te a ni

A thlan dan tur	1CP Tray	2CP Tray	3CP Tray
Chaw ei tur Layout	Cavity pakhat tihbuai loh.	Main cavity pakhat leh side cavity pakhat a awm bawk.	Entrée pakhat leh side cavities pahnih a awm.
Volume hman theih a ni	A tlangpuiin hman theih volume a ti sang ber.	Divider pakhat hian footprint hmun thenkhat a luah a.	Divider system pahnih hian open cavity volume a ti tlem a.
Filling Complexity a awm	Filling process awlsam ber.	Controlled fill pahnih a mamawh.	Fill dik taka control pathum a mamawh.
Heating Complexity a awm bawk	A tlangpuiin optimize awlsam ber.	Chaw pahnih hi a lum dan a inang lo thei.	Chaw pathum hian reheating challenge lian ber a siam a ni.
Chaw Inthenna	Chaw ei tur chu zalen takin a inhmeh thei.	Chaw ei tur chi hnih a then.	Chaw ei tur layout ṭhen thum kimchang tak a support.
Best Fit a ni	Pasta, curry, casserole leh pie te a awm bawk.	Entrée plus a sir khat.	Protein, starch leh thlai chi hrang hrang ei tur.

Compartment Pathum Hian Inthlau Loh Theih Chhan

Chaw pathumte hian mass, moisture content, density, starting temperature leh shape hrang hrang an nei thei. Vegetable portion tlemte chu a lum lutuk thei a, sa emaw buhfai emaw dense portion erawh target temperature hnuaiah a awm thung.

Cavity tinah center temperature chu teh thin ang che.
Chaw component lum ber leh lum ber berte chu endik rawh.
Chaw ei tur chu a shelf life tan tirh leh a tawp lamah test rawh.
Compartment tina ei tur dah dan leh thuk zawng control rawh.
Compartment ratio emaw, ei tur pianzia emaw thlak danglam tum ang che.
Pack kimchang atan microwave emaw oven emaw instruction chiang tak pakhat siam rawh.
Lidding film chu cavities bik chungah pierced emaw vented emaw a ngai em tih enfiah rawh.

Freezer atanga Oven leh Microwave hmanga hnathawh dan

HSQY page thlan bikte chuan -40°C atanga +220°C vel temperature range an tichhuak thin. He material range hi universal use instruction a ni lo va, tray, film leh recipe tin hian hun bituk nei lovin temperature sang ber an hmang thei tihna a ni lo.

Tray model, a rit leh a rawng dik tak chu validate rawh.
Chaw siam dan dik tak leh portion sem dan hmang rawh.
Oil, sugar, chi, acid leh zu awm zat te pawh telh bawk ang che.
Chilled emaw frozen emawa dah rei ber chu test rawh.
Microwave power hnuhnung ber emaw oven time-temperature profile emaw chu run rawh.
Base, corner, divider inkar leh flange te enfiah rawh.
Cavities pathum ah hian food center temperature chu teh vek tur a ni.
Reheating hnuah handling safety confirm rawh.
Compression, vibration leh distribution test hnuah pawh tih leh tur a ni.

3CP CPET Tray te hi Freezer atanga Oven ah Direct in a kal thei em?

Qualified tray hian thermal-shock validation hnuah freezer-to-oven workflow a support thei a ni. Frozen meal tak tak, lidding film, tray model leh oven program te chu test rawh.

Heating laiin Lidding Film hi a on reng thei em?

Heating instruction atan film dik tak design leh validate a nih hnuah chauh. Film thenkhat chu microwave emaw oven emaw hman hmain paih chhuah, pierce emaw vent emaw a ngai a ni.

CPET Trays hi Grill hnuaiah emaw Open Flame hnuaiah emaw hman theih a ni em?

No. CPET tray hian open flames, exposed broiler elements emaw uncontrolled radiant heat emaw a tawk tur a ni lo.

Lidding Film leh Divider Ridge pahnih atanga Sealing

HSQY hian a kaihhnawih offer a pe CPET tray siamna tur sealing film . 3CP design hi single-cavity tray aiin a mamawh zawk a, a chhan chu film hian divider ridge pahnih bakah outer flange a seal a ngai mai thei.

Sealing Requirement	Engvangin	nge Test tur A Pawimawh
Outer Flange nena inmil theihna	Main perimeter seal a siam thin.	Seal tan tirh temperature, pressure leh continuity te.
Divider hmasa ber Contact	Design-in internal sealing a thlawp chuan primary cavity chu side cavity atanga a then a ni.	Divider san zawng, flatness, fai leh tool pressure.
Second Divider nena inzawmna nei	Side cavity la awm chu a then hrang.	Channel leak, pressure balance leh film bridging te a awm bawk.
Peel awlsam tak	Film pumpui tear lovin controlled opening a phalsak.	Divider hrang hranga peel force average, peak force leh peel path te.
Weld Seal a ni	Package khar chak zawk a pe.	Opening method, puncture resistance leh seal integrity te a awm bawk.
Oven emaw Microwave Film emaw hmanga siam a ni	Reheating instruction pawm tawh chu a thlawp.	Venting, shrinkage, odor, migration leh seal stability te a awm bawk.
Anti-Fog Film a ni	Chilled retail visibility a vawng reng.	Filling, cooling leh storage zawhah condensation a awm thin.
Printed Film a ni	Branding, nutrition, instruction leh traceability te a pe thin.	Registration, code area, ink leh barcode chhiar theihna.

Sealing Window rintlak tak siam dan

Tray model chu nemnghet rawh: Divider, a rawng, a rit zawng, flange leh divider san zawng pahnih record rawh.
Lidding film thlang rawh: Peel emaw weld seal awlsam tak, barrier, anti-fog leh heating mamawh turte sawifiah rawh.
Sealing surface zawng zawng enfiah rawh: Chaw, sauce, oil, rice leh particle te chu flange leh divider ridge atanga hla takah dah tur a ni.
Parameter matrix kalpui: Sealing temperature, pressure leh dwell time te chu systematic takin siamrem rawh.
Pressure balance enfiah: Sealing tool hian perimeter leh divider pahnih chu a inang tlangin a inzawm tih finfiah rawh.
Channel leak enfiah: Divider inkar leh corner te chu a bik takin ngaihven rawh.
Seal chakna teh rawh: Chilling, freezing, transport leh reheating hma leh hnuah test rawh.
Commercial speed tihdik: Final production line-a settings awmte chu confirm rawh.

3CP CPET Trays te hi Leakproof a ni em?

CPET material hian grease leh moisture a do thei a, mahse package hi outer flange, divider ridge pahnih, lidding film leh sealing process te an thawhhonaah chauh leak-resistant a ni.

Chaw leh sauce chu effective divider height hnuaiah dah tur a ni.
Perimeter flange leh divider ridges te chu bawlhhlawh paih loh nan venhim tur a ni.
Divider inkar kawngpuiah wrinkles leh film bridge awm leh awm loh enfiah thin ang che.
Filled tray te chu tilt laiin leh vibration hnuah test rawh.
Freezing leh transportation hnuah corner enfiah thin ang che.
A tulna hmunah reheating hnuah package-integrity testing tih leh tur a ni.

3CP CPET Tray hi MAP nen hian hman theih a ni em?

CPET tray thenkhat chu modified atmosphere packaging-ah dah theih a ni a, mahse standard CPET hi automatic-in high-gas-barrier material anga sawi tur a ni lo. MAP-ready system chuan target OTR leh gas-retention specification nena inmil tray structure, lidding film leh seal te a mamawh a ni.

Three-compartment pack-ah hian ngaihven belh a ngai a, a chhan chu cavity tin hian food volume leh headspace hrang hrang a nei thei a ni. Package kimchang atana ei tur, gas mixture, residual oxygen, headspace, shelf life, storage temperature leh integrity test te sawifiah rawh.

Automatic Three-Point Filling leh Sealing Line inmil theihna

Line Parameter	A Pawimawh Chhan	Evaluation
Denesting tih hi a ni	Tray te chu double pick emaw jam emaw awm lovin a inthen tur a ni.	Nesting clearance, static, carton compression leh picker setting te a awm bawk.
Point thum-a Filling	Cavity tin hian ei tur dik taka dah a ngai a ni.	Nozzle position, target weight, splash control leh sequence te a awm bawk.
Divider Thianghlimna	Divider pahnih zinga ei tur hian seal channel a siam thei.	Filling dikna, divider san zawng leh vision inspection te a awm bawk.
Conveyor a nghet thei ang bera awm	Tray chu filling leh sealing hmangin a align reng tur a ni.	Base geometry, guide rail leh center of gravity te a awm bawk.
Tooling Fit a ni	Outer flange leh divider pahnih hi sealing die nen a inmil tur a ni.	Dimension, corner radii, divider pressure leh tolerance te a awm bawk.
Film Tracking a ni	Wrinkles hian divider pakhat emaw, pahnih emaw a cross thei.	Tension, registration, mit chhinchhiahna leh cutting dikna te.
Checkweighing tih a ni	Chaw ei tur pathum hian total-weight variation a tipung.	Tray tare, individual fill control leh final pack rit zawng te a awm bawk.
Cycle Speed a ni	Seal quality chu commercial throughput-ah a nghet reng tur a ni.	Temperature recovery, dwell time leh tool release te a ni.

Stacking, Compression leh Transport Validation te a awm bawk

Empty-tray-a nesting leh automatic denesting te a awm bawk
Filled-tray top-load compression hmanga tihchhuah a ni
Stack pressure hnuaiah divider a inthlak danglam thin
Chilled emaw frozen emawa dah hnuah stack stability a awm thei
Outer-case compression leh pallet loading te a awm bawk
Kawngpui, airport leh last-mile vibration te a awm bawk
Cavities pathum inkara ei tur kal dan
Mechanical stress hnuah seal retention a awm thei
Reheating hnuah tray rigidity a awm

3CP CPET vs Compartment Thum awmna Tray Material dangte

Material	tihlum leh dahkhawmna	Main Advantage	Main Limitation
CPET hmanga tih a ni	Freezer, microwave leh oven pangngaia hman tur thiamna nei.	Dual-ovenable performance leh rigid three-cavity structure a ni.	Variable recycling access leh sealing buaithlak zawk.
PP a ni	Microwave leh freezer-a hmanna atana hman tlanglawn tak.	A rit lo va, a man pawh a tlawm.	Oven hman dan pangngai chu a tlem a, grade-specific a ni.
APET a ni	A bik takin cold leh ambient meal atan.	Product hmuh theihna chiang tak.	High-temperature oven reheating atana siam a ni lo.
Aluminium a ni	Conventional oven performance chak tak a ni.	Heat transfer chak tak leh divider rigid tak tak te.	A tlangpuiin standard microwave hman atan a tha lo.
Ovenable Fiber hmanga siam theih a ni	Board leh coating system ah a innghat.	Paper hmanga siam lan dan leh print theihna.	Barrier, oil resistance leh sealing te hi coatings ah a innghat.

Food-Contact Hriselna leh Dan zawm dan

Food-contact suitability chu CPET resin, pigment, recycled-content level, lidding film leh intended heating condition dik tak atan a dik tih finfiah a ngai a ni. CPET hi food grade a ni tih thu tlangpui hian product-specific documentation a thlak lo.

Destination market, ei tur chi thum zawng zawng, maximum contact temperature, heating time leh storage process te pe rawh. Declaration hman tur, migration emaw test information, technical specification, change-control policy leh batch traceability te dil rawh.

Recycled Content leh Recycle theih dan

CPET hi PET-based a ni a, formulation leh food-contact rules-in a phalna hmunah recycled PET a awm thei bawk. Recycled-content claims te chu tray leh production batch dik tak atan documented tur a ni.

Recyclability tak tak chu local collection leh sorting system-in opaque emaw crystallized PET tray emaw a pawm leh pawm lohah a innghat a ni. Color, lidding film, label, adhesives leh ei tur awmsa te hian recovery a nghawng a ni. 3CP CPET tray tin hi market tinah recycle vek a ni tih universal claims hi pumpelh rawh.

3CP CPET Tray te tana Customization duhthlan tur

Customization	Information mamawh	Engineering ngaihtuah tur
Total Capacity a ni	Chaw ei rit zawng, ei tur volume leh headspace kimchang.	Brimful volume hi hman theih loh chaw ei theihna a ni.
Three-Cavity Ratio a ni	Food component tin atan gram emaw milliliter emaw target rawh.	Divider awmna hian filling, heating leh seal pressure a nghawng a ni.
Dimensions leh Depth te	A sei zawng, a zau zawng, a san zawng, a flange leh a hmanrua tihkhawtlai.	Filler, sealer, carton, rack leh oven-ah te a fit tur a ni.
Divider San zawng a ni	Chaw ei tur inmil, sauce level leh separation target.	Divider sang zawk hian nesting leh sealing-tool contact a nghawng a ni.
Custom Color a ni	Color standard, gloss leh kum tin mamawh a ni.	Pigment hian heat absorption leh sorting a nghawng thei a ni.
Embossed Logo a awm bawk	Artwork, hmun, dimension leh thuk zawng te.	A chakna, base contact leh densting te a nghawng thei.
Lidding Film tihchhuah a ni	Artwork, repeat, code area leh heating instruction te a awm bawk.	Ink, registration, migration leh sealing validation te a ngai.
Private-Label hmanga thil siam chhuah a ni	Case chhiar zat, carton artwork, barcode leh pallet plan te a awm bawk.	Freight density leh warehouse handling a nghawng.

Compartment 3 CPET Tray te tan Quality Control a ni

CPET material identity leh formulation pawm tawh a ni
Tray sei zawng, zau zawng, thuk zawng leh flange dimension hrang hrang
Entrée leh a sir lehlamah cavities te capacity
Divider awmna hmun, a san zawng leh a flatness te
Mimal tray rit leh rit tolerance
Wall, base, corner leh divider thickness insem dan
Crystallization leh lumna laka inven theihna
Frozen impact leh thermal-shock hmanga tihchak a ni
Top-load compression leh stack stack a awm theihna tur a ni
Nesting leh densting consistency a awm bawk
Flange leh divider sealing-a chunglam dinhmun
Seal chakna leh package dik tak
Microwave leh oven pangngaia hman theih a ni
Case pack, carton chakna leh batch traceability te a awm bawk

Harsatna tlanglawn leh siamthatna tur

Buaina	awm thei	Checks rawtna
Chaw ei hian Divider a Cross	Thin sauce, low divider, overfilling emaw tray tilt emaw hmanga siam a ni.	Fill level tihhniam emaw, cavity geometry siamthat emaw.
Cavity pakhat chu a lum reng	Chaw density, mass, moisture emaw placement hrang hrang.	Chaw pathum hmang hian heating instruction siam rawh.
Side te tak te Overheats	Side portion a tlem lutuk emaw, tui a tam lutuk emaw a ni.	Portion shape, cavity ratio emaw heating profile emaw siamrem rawh.
Divider pakhatah Film Leak a awm	Chaw ei bawlhhlawh, divider deformation emaw hmanrua pressure inang lo emaw.	Divider leh sealing-die contact pahnih enfiah rawh.
Heating laiin Tray Warps a awm	Khua lum lutuk, oil lum emaw ei tur load inang lo emaw.	Final heating process sang ber chu test rawh.
Tray Crack A Frozen A nih chuan	Cold impact, corner te tak te emaw mechanical stress emaw a awm thei.	Frozen-drop leh thermal-shock test te kalpui rawh.
Denesting lai hian Tray Jam a awm	Static, carton compression emaw dimensional danglamna emaw a awm thei.	Mould geometry, storage leh line settings te enfiah leh rawh.

Bulk Packaging leh Export Logistics te a ni

3CP CPET tray hrui hring chu a tlangpuiin sleeve-ah dah a ni a, corrugated export carton-ah dah a ni. Published case pack hi tray footprint leh depth a zirin 360 atanga 720 vel a ni.

Sleeve khatah piece leh carton khatah sleeve te confirm rawh.
Carton dimension, net weight leh gross weight te dil rawh.
Nesting compression sang ber tihfiah rawh.
Pallet dimension leh stack san zawng te confirm rawh.
Carton dimension hnuhnung ber atanga container loading chhut rawh.
Mixed-model leh mixed-color loading dan enfiah rawh.
Heat, dust leh crushing laka invenna tur tarlang rawh.
Barcode, batch label leh shipping-mark mamawh te pe rawh.
Incoterms leh delivery schedule te confirm rawh.

3CP CPET Tray Samples te endik dan tur

Dimensions verify: Footprint, depth, flange leh divider pahnih te teh rawh.
Cavity tin teh rawh: Entrée leh a sir pahnih tan hman theih capacity confirm rawh.
Chaw ei tak tak chu khat rawh: Chaw dik tak, sauce leh headspace hmang rawh.
Chaw inthen dan test: Filled package chu tilt la, vibrate rawh.
Production process kalpui: Point thum filling, sealing leh commercial line speed te pawh a tel.
Package chu condition rawh: Chilled emaw frozen emaw storage chu a ruahman hun chhung atan test rawh.
Chaw ei chu tihlum leh rawh: Cavities pathum-a temperature teh vek tur a ni.
Simulate distribution: Compression, vibration leh drop event te pawh a tel.
Golden sample approve: Drawing, weight, color leh quality specification nen link rawh.

Engvangin nge Compartment CPET Tray 3 atan HSQY hi kan thlan?

Tuna 3CP model sawm awm mek hian 22–47 oz vel a huam a ni
Compact, standard leh rectangular meal format lian tak tak a awm
Dimension, weight leh case pack te tihchhuah tawh
Freezer atanga oven thlenga hman tur validated atan dual-ovenable grades a awm
CPET lidding-film support nena inmil
Custom three-cavity ratio, a thuk zawng, a rawng leh a mould siam dan
Filling, sealing, freezing, transport leh reheating atan sample support a ni
Ready-meal factory, airlines leh institutional caterers te tan bulk export supply a ni

A kaihhnawih category hrang hrangte chu 1 compartment CPET tray a awm bawk, 2 compartment CPET tray a awm bawk, airline CPET tray-ah te pawh a awm, CPET baking tray leh Chaw ei tur dahna tur CPET tray.

Sample leh Wholesale Pricing dil theih a ni

Recommendation leh quotation dik tak dawng tur chuan hetiang hian pe rawh:

Tuna tray drawing, model emaw physical sample emaw a awm mek
Chaw ei tur component pathum leh target weight zawng zawng
A mamawh zat total capacity leh cavity ratio
Chaw ei tur inmil, sauce level leh headspace
Chilled emaw frozen emawa dahna tur hmun
Microwave emaw oven emaw hmanga tihlum leh tur tih dan tur
Lidding-film type leh peel behavior mamawh
Tray-sealing machine, tooling leh line speed te a awm bawk
Color, logo, printing leh carton mamawh a ni
Order zat leh kum tin forecast
Destination market leh food-contact documentation te a awm bawk
Shipping terms leh delivery schedule dil dan te

HSQY hnenah zawhfiah theih a ni

FAQ Compartment CPET Tray 3 chungchang

3 compartment CPET tray chu eng nge ni?

Crystallized PET food tray a ni a, entrée atan cavities pathum siam a ni a, side portion pahnih a awm bawk.

HSQY hian eng capacity nge a pek?

Tuna 3CP category-ah hian representative product 22 oz atanga 47 oz vel a tel a ni.

Tunah hian 3CP model engzat nge listed?

Tuna HSQY category-ah hian rectangular three-compartment model sawm a awm a.

Eng rawng nge awm?

Tuna kan thil siamte hi a bik takin black an ni. Project remchang atan white, natural emaw custom color emaw pawh evaluate theih a ni.

3CP CPET tray hi oven-ah a him em?

Model thlan bikte chu validated condition hnuaiah dual-ovenable an ni. Tray, ei tur pathum leh heating process te hi test vek tur a ni.

3CP CPET tray hi microwave-a hman theih a ni em?

Qualified tray chu microwave-ah dah leh theih a ni. Cavity tin test la, a chhan chu ei tur te hi rate hrang hrangin a lum thei a ni.

3CP tray te hi freezer atanga oven ah direct in a kal thei em?

Tray thlan bikte hian thermal-shock test hnuah freezer-to-oven workflows chu ei leh in leh oven program tak tak hmangin a support thei a ni.

CPET tray hian eng temperature nge a tuar theih?

HSQY page thlan bikte chuan -40°C atanga +220°C vel an tichhuak a, mahse pawm hun leh temperature chu a tawp ber hman danah a innghat thung.

Compartment pathumte hi liquid-tight a ni em?

Automatic takin a ni lo. Thin sauce hian tray tilt, overfilled, transported emaw heated emaw a nih chuan divider a cross thei.

Engtin nge three-compartment ratio hi ka thlan ang?

Entrée leh a sir lehlamah target weight leh volume chu a hranin sawifiah la, chutah chuan chaw ei tak tak chu test rawh.

Engvangin nge compartment pathumte hi a lum dan a danglam?

Chaw ei turte hi a mass, moisture, density, starting temperature leh shape-ah a inang lo thei.

Lidding film hi a lum laiin a on reng thei em?

Chu thupek atan chuan film dik tak chu design leh validate a nih chauhvin. Film thenkhat chu lakchhuah, pierce emaw vented emaw a ngai.

3CP tray te hi easy-peel film hmanga seal theih a ni em?

Awle. CPET nena inmil film hmang la, seal temperature, pressure, dwell time leh peel force te chu validate rawh.

Film hian divider ridge pahnih a seal thei ang em?

Divider ridges leh sealing tool te chu contact atana siam a nih chuan a ni thei. A san zawng, a flatness, a faina leh a pressure te chu validate a ngai a ni.

Sealed 3CP tray te hi leakproof an ni em?

Leak resistance hi flange, divider, film, sealing process leh handling pahnih ah a innghat a ni. Tray chauh hian leakproof package a guarantee thei lo.

MAP atan hian 3CP CPET tray hman theih a ni em?

Ṭhenkhat chuan an ti thei a, mahse tray, film leh seal te hian barrier leh gas-retention specification mamawh a tlin a ngai a ni.

3CP tray atan hian eng ei tur nge tha?

Chaw ei tlangpui chu buh leh thlai nena protein, a sir pahnih nei pasta, damdawi ina chaw, sikul chaw leh frozen complete meals te a ni.

2CP leh 3CP hi eng nge an danglamna?

2CP tray hian main dish leh a sir khat a then a, 3CP tray chuan entrée leh a sir pahnih a hranpaa siam a support bawk.

CPET leh PP hi eng nge an danglamna?

CPET hian a tlangpuiin conventional oven temperature sang zawk a support a, PP erawh chu microwave leh lower-temperature hmanna atan thlan a ni tlangpui thung.

HSQY hian cavity ratio hi a duh angin a siam thei ang em?

Awle. Target ei tur rit zawng, volume, sauce, tray dimension, hmanrua details leh kum tin mamawh pek.

CPET tray te hi recycle theih a ni em?

Local system-in opaque emaw crystallized PET tray an pawmna hmunah chuan recyclable an ni thei. Acceptance tak tak chu market hrang hrangah a inang lo.

MOQ pangngai chu eng nge ni?

Model header tam zawkah chuan piece 50,000 vel a awm a, mahse final MOQ chu model, color, packing leh customization-ah a innghat thung.

Sample ka dil thei ang em?

Awle. Sample te chu ei tur tak tak, film, sealing machine, storage cycle, transport leh reheating process hmanga test tur a ni.

Quotation siam nan eng information nge mamawh?

Tray model, ei tur chi thum, cavity ratio, heating process, film, hmanrua, quantity, packing leh compliance mamawh te pe rawh.

Product Category hrang hrang a awm