Kana nan: Gida » » Takardar Roba » Takardar Pet » » Tsarin Gyaran Dabbobin Pet » Mai ƙera da Kaya Fim ɗin Lamilation na PVC-PE

Raba zuwa:

Mai ƙera da Kaya Fim ɗin Lamilation na PVC-PE

Samfuri:
Fim ɗin Laminated na PET/PE
Alamar kasuwanci:
HSQY
Lambar:
Fim ɗin da aka yi wa ado da PET/PE -02
Kauri:
0.23-0.58mm
Launi:
Mai gaskiya
Girman:
musamman
Moq:
1000 KG.

Samuwa:



Bincike

Bayanin Samfurin

Bayanin Samfurin

Fim ɗin APET/PE fim ne mai shinge.

Fim ɗin PET/PE don marufi na abinci, marufi na magunguna, ana iya amfani da fim ɗin PET/PE don tsarin samar da zafi.

Kayan marufi masu dacewa don abinci da marufi na likitanci, marufi na likita

An yi fim ɗin APET/PE da An yi wa fim ɗin PET laminated da wani Layer na fim ɗin PE mai girman 50µm.

Lamination na LDPE yana ba da damar ingantaccen hatimin zafi a cikin tiren da aka riga aka ƙera da kuma aikace-aikacen tsari/cika/hatimi. Ana samun laminate a matakin walda ko bare ya danganta da aikace-aikacen.

Ana samun faifan fim na PET/PE a cikin:

Share
Nau'in birgima mai siffar 3/6'

Takardar Bayanan PET.pdf

Fasallolin Samfura

Fim ɗin PET/PE yana da kyakkyawan shinge akan tururin ruwa, iskar oxygen, iskar gas da sauransu,

Marufi mai kyau na samfuran abinci.

Ya dace da tiren nama da kifi, cuku da sauran aikace-aikacen tsari/cika/hatimi.

Aikace-aikacen Samfuri

Fim ɗin Pet/PE

Shirya nama

Shirya nama

Cikakken Bayani game da Takardar Pet/Naɗin Kunshin

Samfurin : Takardar PET mai tauri ta A4 tare da jakar PP a cikin akwati.
Marufin takardar: 30kg a kowace jaka ko kamar yadda ake buƙata. Marufin
fale-
falen ...

Tambayoyin da ake yawan yi akai-akai

1.Ta yaya zan iya samun farashin?
Da fatan za a ba da cikakkun bayanai game da buƙatunku a sarari gwargwadon iko. Don haka za mu iya aiko muku da tayin a karon farko. Don tsara ko ƙarin tattaunawa, ya fi kyau a tuntuɓe mu da Imel, WhatsApp da WeChat idan akwai wani jinkiri.

2. Ta yaya zan iya samun samfurin don duba ingancin ku?
Bayan tabbatar da farashi, kuna iya buƙatar samfuran don duba ingancinmu.
Kyauta don samfurin hannun jari don duba ƙira da inganci, matuƙar kuna da kuɗin jigilar kaya ta gaggawa.

3. Yaya game da lokacin jagora don samar da kayayyaki?
Gaskiya ne, ya dogara da adadin.
Gabaɗaya kwanaki 10-14 na aiki.

4. Menene sharuɗɗan isar da kaya?
Muna karɓar EXW, FOB, CNF, DDU, da sauransu.,

An kafa ƙungiyar filastik ta ChangZhou HuiSu QinYe fiye da shekaru 16, tare da masana'antu 8 don bayar da nau'ikan samfuran filastik iri-iri, gami da takardar PVC mai ƙarfi, fim mai sassauƙa na PVC, allon kumfa na PVC, takardar dabbobin gida, takardar acrylic. Ana amfani da shi sosai don fakiti, alamar, muhalli da sauran wurare.

Manufarmu ta la'akari da inganci da sabis daidai gwargwado, kuma aiki yana samun amincewa daga abokan ciniki, shi ya sa muka kafa kyakkyawar haɗin gwiwa da abokan cinikinmu daga Spain, Italiya, Austria, Portugal, Jamus, Girka, Poland, Ingila, Amurka, Kudancin Amurka, Indiya, Thailand, Malaysia da sauransu.

Ta hanyar zaɓar HSQY, za ku sami ƙarfi da kwanciyar hankali. Muna ƙera mafi yawan samfuran masana'antar kuma muna ci gaba da haɓaka sabbin fasahohi, tsare-tsare da mafita. Sunanmu na inganci, sabis na abokin ciniki da tallafin fasaha ba shi da misaltuwa a masana'antar. Muna ci gaba da ƙoƙari don haɓaka ayyukan dorewa a kasuwannin da muke yi wa hidima.

Nunin Baje Kolin