Takardar ESD PVC mai ƙarfi don ƙirƙirar injin tsotsa da kuma sarrafa shi a tsaye
Takardar roba mai ƙarfi ta HSQY ESD PVC kayan PVC ne mai sarrafa kansa don ƙirƙirar injin tsotsa, marufi na likita, akwatunan naɗewa, bugu na offset da sauran aikace-aikacen juyawa na ƙwararru inda ake buƙatar sarrafa tarin cajin lantarki.
Bayanin extrusion ya ƙunshi kauri daga 0.21mm zuwa 6.5mm, girman da aka saba da shi na 915 × 1830mm da 1220 × 2440mm, da kuma girman da aka keɓance tare da matsakaicin faɗin da aka jera na kusan 1280mm.
An jera zaɓuɓɓuka masu haske, fari, baƙi, ja, rawaya da shuɗi, tare da ma'aunin shuɗi mai haske da haske na halitta. Masu siye waɗanda ke buƙatar takamaiman matakin aikin ESD ya kamata su samar da kewayon juriya ko juriya da ake buƙata da kuma hanyar gwaji da ta dace kafin a samar.
Bidiyon Takardar ESD PVC Mai Tauri
Hotunan Takardar PVC Mai Tauri na ESD
![Takardar ESD PVC mai ƙarfi]()
Takardar ESD PVC Mai Tauri
![Takardar ESD PVC mai haske]()
Takardar PVC ta ESD bayyananne
Menene Takardar ESD PVC Mai Tauri?
Takardar ESD PVC mai tauri abu ne da aka yi niyya don aikace-aikace inda ake buƙatar sarrafa cajin lantarki yayin sarrafawa, ƙera ko amfani. Dangane da matakin da aka zaɓa da kuma magani, aikin sarrafa-tsayawa na iya bambanta sosai.
Saboda wannan dalili, bai kamata a ɗauki kalmomi kamar antistatic, static-dissipative da conductive a matsayin ƙayyadaddun bayanai masu canzawa ba. Masu siye waɗanda ke da ƙa'idar ESD da aka ƙayyade ya kamata su samar da kewayon aikin lantarki da ake buƙata tare da hanyar aunawa da ake amfani da ita don karɓa.
Tsarin PVC mai tsauri za a iya amfani da shi don samar da injin tsabtace iska mai dacewa, marufi na likita, canza akwati mai naɗewa, bugawa da kayan da aka ƙera a masana'antu bisa ga kauri da matakin da aka zaɓa.
Takardar ESD PVC Mai Tauri
| Bayanin |
Kadara |
| Nau'in Samfuri |
Takardar ESD / Takardar Riga ta PVC Mai Hana Tsauri |
| Kayan Aiki |
Polyvinyl Chloride (PVC) |
| Girman takardar |
915 × 1830mm, 1220 × 2440mm ko an keɓance shi |
| Iyaka Faɗi |
≤1280mm |
| Kauri |
0.21mm–6.5mm |
| Yawan yawa |
1.36–1.38 g/cm³ |
| Zaɓuɓɓukan Gaskiya |
Na Halitta Mai Haske, Mai Haske Mai Shuɗi |
| Launuka |
Bayyananne, Fari, Baƙi, Ja, Rawaya da Shuɗi |
| saman |
Mai sheƙi / Mai sheƙi |
| Aikin ESD |
Yadda ake Bukatar Juriyar Sama ko Juriya da Hanyar Gwaji |
| Ƙarfin Taurin Kai |
>52 MPa |
| Ƙarfin Tasiri |
>5 kJ/m² |
| Ƙarfin Tasirin Faɗuwa |
Babu Karyewa |
| Zafin Tausasawa |
>75°C don Farantin Ado; >80°C don Farantin Masana'antu |
| Babban Aikace-aikace |
Tsarin Injin Tsaftacewa, Marufi na Likitanci, Akwatunan Nadawa da Bugawa Mai Sauƙi |
Aikin injina, zafi da kuma tsarin sarrafawa na iya bambanta dangane da tsari, kauri, maganin saman da yanayin gwaji. Tabbatar da ƙimar fasaha da ta dace don ainihin matakin da ake buƙata.
Me Yasa Juriyar Fuskar Take da Muhimmanci ga Takardar ESD PVC
Ya kamata a zaɓi samfurin da aka bayyana a matsayin ESD ko antistatic ta amfani da buƙatun lantarki masu aunawa maimakon kalmomi kawai. Ana amfani da juriyar saman ko juriyar saman don bayyana yadda takardar ke aiki ta hanyar lantarki.
Aikace-aikace daban-daban masu saurin amsawa na iya buƙatar nau'ikan juriya daban-daban. Yanayin muhalli, lokacin sanyaya yanayi, tsarin lantarki da hanyar gwaji suma na iya shafar ƙimar da aka ruwaito.
Lokacin da kake buƙatar takardar PVC ta HSQY ESD, ka samar da kewayon juriya da kake buƙata da kuma ma'aunin gwaji tare da aikace-aikacen. Wannan yana ba da damar kimanta ƙimar kayan bisa ga ainihin buƙatun siyanka.
Takardar ESD PVC don Tsarin Injin
Tsarin injin tsotsar na'ura yana ɗaya daga cikin manyan aikace-aikacen da aka jera don wannan takardar PVC mai tauri. Ana iya canza kayan zuwa tire, murfi, kayan marufi da sauran sassan da suka dace inda ake buƙatar halayen sarrafawa mai tsauri.
Aikin ƙirƙirar ya dogara ne da kauri na takarda, kayan aiki, yanayin dumama, zurfin zane da kuma yanayin kayan aiki. Masu siye ya kamata su kimanta matakin ESD PVC da aka zaɓa ta amfani da kayan aikin ƙirƙirar da aka yi niyya kafin a sake yin amfani da su.
Takardar ESD PVC don Marufi na Likita
Marufi na likita wani aikace-aikacen da aka jera don kayan ne. PVC mai haske na iya samar da ganuwa ga samfura yayin da matakin sarrafawa mai dacewa zai iya taimakawa rage tarin cajin lantarki yayin gudanar da aiki da marufi masu dacewa.
Masu siye ya kamata su samar da aikin ESD da ake buƙata, kauri, tsarin ƙira, tsarin marufi da duk wani takaddun takamaiman aikace-aikace da ake buƙata kafin a tabbatar da ƙayyadaddun kayan.
Aikin sarrafa tsayayyen tsari shi kaɗai ba ya tabbatar da dacewa ga wani tsari mai kariya daga ƙwayoyin cuta, magunguna ko wasu aikace-aikacen likita da aka tsara. Duk wani bin ƙa'ida da ake buƙata ya kamata a tabbatar da shi don ainihin matakin PVC da kuma amfanin da aka yi niyya.
Takardar ESD PVC don Nadawa Akwatunan
Haka kuma za a iya canza takardar PVC mai tauri zuwa akwatunan naɗewa masu jituwa inda ake buƙatar marufi mai haske ko launi da kuma aikin sarrafa-tsare.
Ya kamata a daidaita kauri mai dacewa da girman akwatin da aka gama, taurin da ake buƙata da kuma tsarin yankewa, ƙima, naɗewa da haɗawa da aka yi niyya.
Takardar ESD PVC don Bugawa ta Biyan Kuɗi
Bugawa ta offset tana cikin jerin aikace-aikacen da aka jera don wannan takardar PVC. Ana iya la'akari da ma'aunin sarrafawa mai tsauri inda tarin caji ke shafar sarrafawa yayin bugawa ko juyawa daga ƙasa.
Mannewa da ingancin bugu da aka gama ya dogara ne akan ainihin matakin PVC, yanayin saman, tsarin tawada, tsarin latsawa da yanayin matsewa. Ya kamata a kimanta dacewa da bugawa ta amfani da tsarin samarwa da aka yi niyya.
Aikace-aikacen Masana'antu na Takardar ESD PVC
Bayanin samfurin da ke akwai kuma yana gano aikace-aikace a cikin sarrafa sinadarai, kayan aiki masu alaƙa da mai, galvanization, kayan aikin tsarkake ruwa, kayan aikin kare muhalli da kayan aikin likita.
Don waɗannan amfani na masana'antu, ya kamata a sake duba ainihin buƙatun sinadarai, na inji, na zafi da ESD dangane da matakin kayan da ya dace kafin a ƙayyade takardar.
Hotunan Aikace-aikacen Takardar PVC ta ESD
![Aikace-aikacen takardar ESD PVC]()
Aikace-aikacen Takardar ESD PVC
![Aikace-aikacen marufi na takardar PVC]()
Aikace-aikacen Marufi na PVC
![Samfurin da aka canza takardar PVC mai tsauri]()
Samfurin da aka canza ta hanyar PVC mai tauri
Yadda Ake Ƙayyade Takardar Taushi ta PVC ta ESD
| Bayanin Bukatar |
da Za a Bada |
| Bukatar ESD |
Tsarin juriyar saman ko juriya da ake buƙata da hanyar gwaji |
| Aikace-aikace |
Tsarin injin tsotsa, marufi na likita, akwatin nadawa, bugu ko kayan masana'antu |
| Kauri |
Zaɓi a cikin kewayon 0.21mm–6.5mm da aka jera |
| Girma |
Girman da faɗin takardar da ake buƙata, tare da an tabbatar da buƙatun faɗi mafi girma |
| Launi |
Launi mai haske, shuɗi, fari, baƙi, ja, rawaya, shuɗi ko wani zaɓi da aka tabbatar |
| Sarrafawa |
Tsarin injin tsotsa, yankan, naɗewa, bugawa ko wani tsari na juyawa |
| Takardun Fasaha |
A ƙayyade duk wani rahoton gwaji ko takardun karɓa da ake buƙata |
| Bayanan Kasuwanci |
Adadin sayayya da wurin isar da kaya |
Albarkatun Fasaha
Ana ajiye fayilolin fasaha masu zuwa daga shafin samfurin da ke akwai. Tabbatar da wace takarda ce ta shafi ainihin matakin PVC, kauri da aikace-aikacen da aka haɗa a cikin odar ku.
Don wasu kayan PVC masu tauri, ziyarci Jerin samfuran takardar PVC.
Zaɓuɓɓukan Marufi da Isarwa
Ƙaramin Marufi: Ana iya saka zanen PVC mai ƙarfi na girman A4 a cikin jakunkuna da akwatunan PP don tabbatar da oda.
Marufi na Naɗi: Marufi na asali shine 50kg a kowace naɗi inda aka samar da tsarin samfurin da aka zaɓa a cikin naɗi.
Marufin Pallet: Nauyin pallet ɗin da aka ambata shine 500–2000kg a kowace pallet ɗin plywood.
Lodawa a Kwantena: Yawan nauyin da aka ambata yana da kimanin tan 20 dangane da tsarin samfurin ƙarshe da kuma tsarin marufi.
Sharuɗɗan Isarwa: EXW, FOB, CNF da DDU.
Lokacin Jagora: Kwanaki 10-14 bayan ajiya, ya danganta da takamaiman takamaiman da girman oda.
Takaddun shaida da Takardu
Shafin samfurin ya haɗa da takardun fasaha da takaddun shaida na PVC. Masu siye ya kamata su tabbatar da takaddun shaida, rahotanni da sakamakon gwaji da suka shafi ainihin matakin ESD PVC, kauri da aikace-aikacen da aka yi niyya da aka haɗa a cikin oda.
Nunin Ƙasa da Ƙasa na Ƙungiyar Roba ta HSQY
![Nunin Mexico na 2024.8]()
Nunin Mexico na 2024.8
![Nunin Philippines na 2025.9]()
Nunin Philippines na 2025.9
![Nunin Amurka na 2024.5]()
Nunin Amurka na 2024.5
![Nunin Shanghai na 2017.3]()
Nunin Shanghai na 2017.3
![Nunin Shanghai na 2018.3]()
Nunin Shanghai na 2018.3
![Nunin Amurka na 2023.9]()
Nunin Amurka na 2023.9
Tambayoyin da Ake Yawan Yi Game da Takardar ESD PVC
Menene takardar ESD PVC mai ƙarfi?
Takardar ESD PVC mai ƙarfi kayan polyvinyl chloride ne da aka yi niyya don aikace-aikace inda ake buƙatar sarrafa caji mai tsauri yayin sarrafawa, samarwa, marufi ko amfani da masana'antu.
Shin ESD PVC iri ɗaya ne da PVC mai hana kumburi?
Ba lallai ba ne. Kayan antistatic, static-dissipative da conductive na iya samun nau'ikan aikin lantarki daban-daban. Ya kamata a ƙayyade juriyar saman da ake buƙata ko juriya yayin yin oda.
Menene juriyar saman wannan takardar ESD PVC?
Bayanin samfurin da ke akwai bai bayyana ƙimar juriya ɗaya ta duniya ba. Da fatan za a samar da kewayon juriya da ake buƙata da hanyar gwaji don a tabbatar da ƙimar da ta dace.
Me yasa ya kamata a ƙayyade hanyar gwajin tare da ƙimar juriya?
Ma'aunin lantarki na iya dogara ne akan hanyar gwaji da yanayin aunawa. Samar da hanyar da ake buƙata yana taimakawa wajen tabbatar da cewa an kimanta kayan bisa ga ka'idojin karɓa iri ɗaya da mai siye ya yi amfani da su.
Wane irin kauri ne ake samu?
Takaddun da aka lissafa na extrusion sun rufe kauri na takardar daga 0.21mm zuwa 6.5mm.
Wadanne girman takardar ake da su?
Girman takardar da aka jera sun haɗa da 915 × 1830mm da 1220 × 2440mm, tare da girman da aka keɓance. Takaddun sun lissafa matsakaicin faɗin kusan 1280mm.
Wadanne launuka ne ake samu?
Launukan da aka lissafa sun haɗa da fari, baƙi, ja, rawaya da shuɗi. An kuma gano zaɓuɓɓukan shuɗi masu haske da haske na halitta.
Za a iya ƙirƙirar takardar ESD PVC ta injin tsabtace iska?
Eh. Tsarin injin tsotsa yana ɗaya daga cikin aikace-aikacen da aka lissafa. Ya kamata a kimanta matakin da aka zaɓa ta amfani da kayan aikin da aka yi niyya, yanayin dumama da kuma yanayin da aka gama.
Za a iya amfani da takardar ESD PVC don marufi na likita?
Marufi na likita yana ɗaya daga cikin aikace-aikacen da aka jera. Masu siye ya kamata su tabbatar da aikin ESD da ake buƙata, buƙatun tsari da duk wani takaddun takamaiman aikace-aikace don kunshin da aka gama.
Shin aikin ESD yana sa kayan ya dace da marufi na likita ta atomatik?
A'a. Ayyukan sarrafa-tsaye da bin ka'idojin likita ko na hana ƙwaya su ne buƙatu daban-daban. Ya kamata a tabbatar da kayan aiki da takaddun da suka dace don ainihin amfanin da aka yi niyya.
Za a iya amfani da takardar don akwatunan naɗewa?
Eh. Akwatunan naɗewa suna cikin aikace-aikacen da aka lissafa. Ya kamata a daidaita kauri da tsarin akwatin da tsarin juyawa.
Za a iya buga takardar da aka ƙayyade?
Bugawa ta offset tana ɗaya daga cikin aikace-aikacen da aka lissafa. Ya kamata a kimanta dacewa da tawada da aikin bugawa da aka gama tare da kayan aikin PVC da aka zaɓa da kuma kayan aikin samarwa.
Wane irin yawa aka lissafa don kayan?
Jerin yawan da aka lissafa shine 1.36–1.38 g/cm³.
Waɗanne kaddarorin injiniya aka lissafa?
Takaddun da ke akwai sun lissafa ƙarfin tauri sama da 52 MPa, ƙarfin tauri sama da 5 kJ/m² da kuma sakamakon faɗuwa sakamakon rashin karyewa.
Waɗanne yanayin zafi masu laushi aka lissafa?
Takaddun da ke akwai sun lissafa zafin laushi sama da 75°C don farantin ado da sama da 80°C don farantin masana'antu.
Shin akwai takaddun da ke nuna cewa ana iya ƙonewa?
An ajiye takardar PVC mai ƙarfi mai ƙonewa a cikin sashin albarkatun fasaha. Tabbatar cewa takardar ta shafi ainihin matakin ESD PVC da kauri da ake buƙata don odar ku.
Wane bayani ya kamata in bayar don yin ƙiyasin farashi?
Da fatan za a samar da juriya ko juriyar saman da ake buƙata, hanyar gwaji, kauri, girma, launi, aikace-aikace, tsari ko bugawa, adadi da wurin isarwa.
Game da Ƙungiyar Roba ta HSQY
Kamfanin Changzhou Huisu Qinye Plastic Group Co., Ltd yana samar da takaddun PVC masu ƙarfi da sauran kayan filastik don ƙirƙirar injinan tsaftacewa, marufi, bugawa da kuma canza masana'antu.
Ga ayyukan takardar ESD PVC, masu siye za su iya tattauna buƙatun aikin lantarki, kauri, girma, launi, tsari ko bugawa, takardun fasaha, adadi da shirye-shiryen isarwa bisa ga aikace-aikacen da aka gama.
