HSQY UV Takpɔkpɔ 0.8- 20mm Polycarbonate Agbalẽvi Sesẽ PC Agbalẽvi

UV Takpɔkpɔ Sesẽ Polycarbonate Agbalẽvi 0.8-20mm

HSQY UV takpɔkpɔ sesẽ polycarbonate agbalẽ nye PC agbalẽ si nɔa anyi didina, si le bɔbɔe eye wòte ŋu nɔa te ɖe nutete nu si wowɔ na glazing, xɔtaxɔ, xɔtutu, dedienɔnɔ mɔxenuwo, kaɖinuwo, elektrɔnikmɔ̃wo, atikewɔnuwo kple dɔwɔƒewo ƒe wɔwɔme. Enaa kekeli ƒe ʋuʋu deŋgɔ, ŋusẽkpɔɖeamedzi sesẽ ƒe tsitretsitsi, UV yame ƒe nɔnɔme takpɔkpɔ kple dɔwɔwɔ nyuie ŋutɔ.

HSQY naa PC ƒe agbalẽ sesẽwo le amadede siwo me kɔ, porcelain ɣi, notsi ɣi kple esiwo wowɔ ɖe ɖoɖo nu me, kple anyigba ƒe tiatia siwo le gbadzaa, siwo me tsikpe le, siwo le keklẽm eye wole matte. Woate ŋu ana titrime tso 0.8mm va ɖo 20mm alo atrɔ asi le eŋu le lãɖeɖe, bɔbɔ, tata, laser nuŋɔŋlɔ, dzoxɔxɔ ƒe nɔnɔme kple xɔtudɔa ƒe nudidiwo nu.

Polycarbonate Sesẽ ƒe Agbalẽvi Video

Adzɔnuwo Ŋuti Nyatakakawo

Wowɔ HSQY sesẽ polycarbonate agbalẽwo tso 100% yeye polycarbonate nu eye woate ŋu atrɔ asi le wo ŋu na plastik kaɖi wɔwɔ, laser nuŋɔŋlɔ, laser tata, xɔtu glazing, elektrɔnik xɔtuɖaŋu kple dɔwɔƒewo ƒe dɔwɔwɔ.

Nusiwo le UV Takpɔkpɔ Sesẽ Polycarbonate Agbalẽvi ŋu

• Kekeli ƒe kaka si lolo: PC ƒe agbalẽ si me kɔ ate ŋu ana kekeli ƒe kaka si ade 88% ne wotsɔe sɔ kple glass si ƒe titrime sɔ kple wo nɔewo le xexeame katã.

• Tsitretsitsi ɖe nu ŋu nyuie ŋutɔ: Polycarbonate-gbadzɛ sesẽ la te ŋu nɔa te ɖe nu dzi wòdea ahuhɔ̃e tɔ ƒe teƒe 80, si wɔe be wòsɔ na dedienɔnɔ kple ametakpɔnudɔwo.

• Yame ƒe nɔnɔme kple UV ƒe tsitretsitsi: UV co-extruded protection kpena ɖe resin ƒe ɖeɖiteameŋu, ɣie kple gota ƒe gbegblẽ si ultraviolet zazã hena vɛ dzi ɖeɖe kpɔtɔ.

• Dɔwɔwɔ si le bɔbɔe: Polycarbonate le bɔbɔe wu glass sã, etsɔtsɔ le bɔbɔe eye wòsɔ na vuvɔ ƒe ƒoƒo, dzoxɔxɔ ƒe nɔnɔme kple eɖoɖo.

• Dzoxɔxɔ ƒe tsitretsitsi: Dzotsitsi ƒe tiatia ate ŋu aɖo B1 ƒe ​​hatsotso me na dɔwɔwɔ siwo hiã dzo ƒe dɔwɔwɔ nyuie wu.

• Gbeɖiɖi kple dzoxɔxɔ ƒe mɔxenuwo: Esɔ na mɔxenu siwo le mɔdodo gã dzi, ametakpɔnu siwo wotsɔ wɔa nu kple ahuhɔ̃e siwo mexɔa ŋusẽ o.

• Engineering plastic performance: Polycarbonate naa ŋutilã, mɔ̃ɖaŋu, elektrikŋusẽ kple dzoxɔxɔ-tsitretsitsi ƒe nɔnɔme nyuiwo.

PC Sheet Nusiwo Wozãna

Polycarbonate gbadzɛ sesẽ la nye esi dɔwɔƒewo, aɖaŋuwɔlawo, kaɖiwɔlawo, xɔtudɔwɔlawo kple dɔwɔƒewo ƒe asisi siwo hiã mɔ̃ɖaŋunu si me kɔ, si sesẽ eye wòle bɔbɔe be woatrɔ asi le eŋu la zãna geɖe.

• Elektrɔnikmɔ̃wo: Wozãnɛ tsɔ xea mɔ na plug-ins, coil frames, tube sockets kple batri ƒe gowo na tomenukulawo ƒe akaɖiwo.

• Mɔ̃ɖaŋudɔwɔnuwo: Esɔ na gears, racks, bolts, levers, crankshafts, dɔwɔnuwo ƒe xɔwo, nutsyɔnuwo kple framewo.

• Atikewɔnuwo: Wozãnɛ na kpluwo, pɔmpiwo, aŋetuwo, aɖudɔwɔnuwo, atikewɔnuwo kple atikewɔwɔ ƒe akpa siwo me kɔ.

• Xɔtutu: Wozãnɛ na greenhouse glazing, hollow rib panels, ametakpɔnu glazing, dedienɔnɔ mɔxenuwo kple xɔtu panels.

• Kpekpeɖeŋugbalẽvi wɔwɔ: Esɔ na plastik kaɖi nu, laser nuŋɔŋlɔ kaɖiwo, laser tata kaɖiwo kple dedienɔnɔ kaɖi ƒe dɔwɔwɔ.

Te Ðe Mía Ŋu hena Nyayɔyɔ

Nyabiasewo ƒe Nyabiasewo

Nukae nye dzo ƒe dzidzenu si le polycarbonate sheet ŋu?

HSQY ate ŋu ana dzo-xe mɔ na polycarbonate agbalẽ sesẽ tiatia. Dzo ƒe dzeside si ƒe hatsotso B1 li na dɔ siwo hiã be woana dzo ƒe tsitretsitsi nanyo ɖe edzi. Taflatse ɖo kpe wò dzidzenu si wobia dzi hafi nàbia.

Ðe polycarbonate-gbadzɛ mate ŋu agbã oa?

Polycarbonate sheet ƒe ŋusẽkpɔɖeamedzi te ŋu nɔa te ɖe nu dzi ŋutɔ eye wogblɔna zi geɖe be womate ŋu agbãe kloe le dɔwɔwɔ siwo sɔ me o. Gake womate ŋu aka ɖe edzi be plastik-gbadzɛ aɖeke mate ŋu agbã 100% le nɔnɔme sesẽwo abe wowó alo ballistic impact ene me o.

Ðe mate ŋu atso polycarbonate-gbadzɛ le aƒemea?

Ɛ̃. Woateŋu atsɔ dɔwɔnu siwo sɔ abe jigsaw, band saw alo fret saw atso polycarbonate gbadzɛwo. Le nudɔdɔ gbogbowo alo didime siwo sɔ pɛpɛpɛ gome la, HSQY ate ŋu ana dɔwɔwɔ ƒe dɔwɔna si wotso ɖe lolome nu.

Aleke mawɔ akɔ nye polycarbonate-gbadzɛa ŋu?

Zã adzalẽtsi dzodzoe kple avɔ falɛfalɛ. Mègazã nusiwo wotsɔna ƒoa nu, dɔwɔnu ɖaɖɛwo alo atike sesẽwo o, elabena woate ŋu avuvu alo agblẽ nu le polycarbonate ƒe anyigba ŋu.

Vovototo kae le polycarbonate kple acrylic dome?

Polycarbonate ƒe ŋusẽ te ŋu nɔa te ɖe nu dzi wu sã eye dzo ƒe dɔwɔwɔ nyo wu acrylic. Acrylic ƒe nukpɔkpɔ me kɔ nyuie, gake anɔ eme be ate ŋu agbã alo agbã ne woƒoe sesĩe.

Ðe polycarbonate-gbadzɛwo ƒe amadede trɔna le ɣeyiɣi aɖe megbea?

PC-gbadzɛ siwo wokpɔ ta na UV kpena ɖe ame ŋu be woaɖe ɣie kple amadede ƒe tɔtrɔ dzi akpɔtɔ ne wozãe le gota. Subɔsubɔ ƒe agbenɔƒe nɔ te ɖe UV layer ƒe nyonyome, eɖoɖo ƒe nɔnɔme kple beléle na nɔnɔmewo dzi.

Ðe xɔtaxɔ siwo wotsɔ polycarbonate wɔe nana xɔwo xɔa dzo ŋutɔa?

Woate ŋu atsɔ amadede siwo sɔ, nusiwo woatsɔ atsyɔ wo dzi alo nusiwo xea mɔ na dzoxɔxɔ ƒe nɔnɔme ana polycarbonate xɔtaxɔwo be woatsɔ aɖe dzoxɔxɔ ƒe ƒoƒo dzi akpɔtɔ. Le xɔtadɔwo gome la, tia amadede, titrime kple UV takpɔkpɔ nyuitɔ le nutoa me yame ƒe nɔnɔme kple xɔa ƒe nɔnɔme nu.

Ðe PC-gbalẽvi sesẽwo gbãna bɔbɔea?

Ao, polycarbonate-gbadzɛ sesẽwo te ŋu nɔa te ɖe nusiwo adze wo dzi nu ŋutɔ eye woƒe dzoxɔxɔ kple yame ƒe nɔnɔme te ŋu nɔa te sesĩe, si doa alɔ woƒe agbenɔƒe didi wu agbalẽ geɖe siwo wozãna tsã siwo me kɔ.

Nuwo babla

Dɔwɔƒea ƒe Ŋgɔdonya