Polystyrene (HIPS) ƒe Agbalẽvi Siwo Kpɔa Ŋusẽkpɔɖeamedzi Gãwo

HI PS agbalẽ Dɔwɔƒe si wɔa Thermoforming kple Printing

HSQY PLASTIC wɔa HIPS agbalẽ dzi nyawo s na dzoxɔxɔ ƒe wɔwɔme, vacuum wɔwɔ, agbalẽtata, dzesiwo, nukpɔkpɔwo, fridzi ƒe nutrenuwo, mɔ̃wo ƒe akpa aɖewo, nubablɛwo traywo dzi , dɔwɔƒewo ƒe nutsyɔnuwo kple elektrɔnik nubablɛwo.

HIPS tsi tre ɖi na High Impact Polystyrene . Enye polystyrene si wotsɔ rababa trɔ asi le eŋu si woto vɛ be wòana sesẽme kple ŋusẽkpɔɖeamedzi nu geɖe wu polystyrene si wozãna le mɔ gbadza nu esime wòléa sesẽ nyui, agbalẽtata kple nuwɔwɔ ƒe dɔwɔwɔ me ɖe asi.

HSQY ƒe fifi dzidzenu HIPS agbalẽ dzi nyawo ƒe didime xɔa abe 0.2–6 mm ƒe titrime , kekeme vaseɖe abe 1600 mm , dzidzenu 1220 × 2440 mm / 4 × 8 ft agbalẽ dzi nyawo s, kple ɣi, yibɔ, amadede kple amadede tɔxɛ ƒe tiatia.

HSQY hã naa ameyibɔ ESD tɔxɛ kple anti-static HIPS agbalẽ dzi nyawo kple roll na elektrɔnik nubablɛdɔwo. Ele be woatia elektrikŋusẽ ƒe dɔwɔwɔ le anyigba ƒe tsitretsitsi kple dodokpɔmɔnu si hiã nu tsɔ wu be woatia nusi wowɔ ƒe amadede ɖeɖeko.

Nukae Nye HI PS agbalẽ ?

HIPS agbalẽ dzi nyawo nye dzoxɔxɔŋusẽ si woɖe tso eme agbalẽ dzi nyawo si wotsɔ polystyrene si wogbugbɔ trɔ kple rababa ƒe akpa si doa ŋusẽ ame ƒe ŋusẽkpɔɖeamedzi.

Polstyrene si wozãna le mɔ gbadza nu si wozãna ɖaa la sesẽna gake ne wotsɔe sɔ kple wo nɔewo la, egbãna. Rababa ƒe tɔtrɔ si wozã le HIPS me naa sesẽme kple tsitretsitsi ɖe gbagbã ŋu nyona ɖe edzi, si wɔe be HIPS sɔ nyuie wu na dzoxɔxɔ ƒe nɔnɔme traywo dzi , mɔ̃wo ƒe ʋuƒo, nukpɔkpɔ siwo wota kple akpa siwo wowɔ.

HIPS nye nusi wotia zi geɖe le afisi dɔ aɖe hiã na gazazã ƒe ƒuƒoƒo si nye sesẽ, nusiwo ate ŋu adze anyi, dzoxɔxɔ ƒe nɔnɔme, agbalẽtata kple ewɔwɔ bɔbɔe evɔ mahiã be woawɔ mɔ̃ɖaŋununya ƒe plastik siwo xɔ asi wu ƒe dɔwɔwɔ ƒe ɖoɖo si de ŋgɔ wu o.

HI PS agbalẽ Nusiwo wogblɔ

Nu si wowɔ	Polystyrene ƒe Agbalẽvi si Kpɔa Ŋusẽkpɔɖeamedzi Gã / HIPS Plastik agbalẽ
Nu	Polystyrene si wotsɔ goma trɔ asi le / Polystyrene si kpɔa ŋusẽ gã aɖe ɖe ame dzi
Standard Thickness Range ƒe didime	Anɔ abe milimeta 0.2–6 ene
Titrime siwo woɖe fia	0.5 mm, 1.0 mm, 2.0 mm kple dzidzenu siwo wowɔ ɖe ɖoɖo nu
Agbalẽvi ƒe Agbɔsɔsɔme si Woɖo Ðe Ðoɖo Nu	1220 × 2440 mm / anɔ abe afɔ 4 × 8 ene
Fifia ƒe Kekeme si sɔ gbɔ wu	Anɔ abe 1600 mm na fifi dzidzenu HIPS adzɔnuwo ƒe ƒome
Amadedewo	Yevu, yevu, amadede kple amadede siwo wowɔ ɖe ɖoɖo nu
Standard Surface	Anyigba si le gbadzaa; ele be woaɖo kpe gloss, texture alo application-specific surface requirements dzi le grade nu
Nuwo Nana ƒe Agbalẽvi	Flat agbalẽ dzi nyawo s kple rollstock ƒe nɔnɔmetata tiatia
Dɔwɔwɔ tso eŋu	Thermoforming, vacuum wɔwɔ, ku lãɖeɖe, CNC lãɖeɖe, tomekuku, agbalẽtata, nutata kple laminating
Dzeside Tɔxɛ	Black ESD / anti-static HIPS li na elektrɔnik nubablɛ ƒe dɔ tiatia aɖewo
Dɔwɔwɔ Veviwo	Akpa siwo wotsɔ dzoxɔxɔ wɔe, fridzi ƒe nutrenuwo, mɔ̃wo ƒe akpa aɖewo, nubablɛwo traywo dzi , dzesiwo, nusiwo woɖena fiana, nɔnɔmetata siwo wota kple elektrɔnik nubablɛwo

Viɖe Vevi Siwo Dona le Polystyrene Sheet si Kpɔa Ŋusẽkpɔɖeamedzi Gãwo Ŋu

Dzoxɔxɔ ƒe Dɔwɔwɔ Nyui: Woateŋu ado dzo HIPS eye woawɔe wòazu traywo dzi , liners, covers, housings kple akpa bubu siwo le akpa etɔ̃ me to thermoforming dɔwɔnu siwo sɔ zazã me.

Sesẽme si nyo wu: Rababa ƒe tɔtrɔ nana be woate ŋu anɔ te ɖe ƒoƒo kple gbagbã nu wu GPPS si wozãna ɖaa.

Agbalẽtata Nyui: HIPS anyigba siwo sɔ ateŋu ado alɔ screen printing, digital printing kple printing process bubuwo ne woɖo kpe edzi be wosɔ kple surface-treatment ƒe nudidiwo.

Easy Fabrication: HIPS ate ŋu atso, aku, routed, die-cut, laminated eye woawɔe wòazu akpa siwo wowɔ ɖe ɖoɖo nu.

Dimensional Stability Nyui: HIPS naa dadasɔ si ŋu viɖe le le sesẽme kple sesẽme na traywo dzi , dzesiwo, liners kple fabricated panels.

Amadede siwo wowɔ ɖe ɖoɖo nu: Woate ŋu ana agbalẽ dzi nyawo s siwo ƒe amadede nye ɣi, yibɔ kple esiwo wowɔ ɖe ɖoɖo nu le adzɔnuwo ƒe nɔnɔme ƒe nudidiwo nu.

Dɔwɔwɔ si me Gazazã Le: Wobua HIPS ŋu le afisiafi na agbalẽtata kple agbalẽtata ƒe dɔwɔwɔ siwo ƒe lolome lolo le afisiwo wòhiã be woatsɔ dzoxɔxɔ ƒe aŋɔ agbalẽ dzi nyawo si me ga mele o.

Dzidzenu HIPS vs. ESD HI PS agbalẽ

Nɔnɔme	Dzidzenu HIPS	ESD / Anti-Static HIPS
Dɔ Vevietɔ	Gbãtɔ ƒe ŋusẽkpɔɖeamedzi-tsi tre ɖe wɔwɔme kple fabrication	Forming kpe ɖe dɔwɔwɔ-koŋ static-dziɖuɖu dɔwɔwɔ
Fifia HSQY ƒe Titrime	Anɔ abe milimeta 0.2–6 ene	Anɔ abe 0.2–1.8 mm ene le ESD ƒe adzɔnu si woɖo ɖi fifia dzi
Amadede	Amadede ɣi, yevu kple esiwo wowɔ ɖe ɖoɖo nu	Fifia HSQY adzɔgbeɖeɖe ESD nuwɔna nye ameyibɔ
Dɔwɔwɔ Siwo Wozãna Zi geɖe	Nusiwo woɖena fiana, nusiwo wotsɔ blaa nu, nubablɛwo, akpa siwo wotsɔ dzoxɔxɔ wɔe kple akpa siwo wota	IC, PCB, PCBA, SMT kple elektrɔnik-kpa traywo dzi alo ametakpɔnu bablawo
Elektrikŋusẽ ƒe Nyatakakawo	Womegblɔe zi geɖe na static-control dɔwɔwɔwo o	Ele be woaɖo kpe taɖodzinu ƒe anyigba ƒe tsitretsitsi kple dodokpɔmɔnu dzi hafi adɔ nu

Anti-static, static-dissipative kple conductive menye nya siwo woate ŋu atrɔ o. Ele be elektrɔnik-nubablɛ ƒlelawo nana elektrikŋusẽ ƒe tsitretsitsi ƒe didime si hiã, dodokpɔ ƒe ɖoɖo kple subɔsubɔ ƒe nɔnɔme ne wole ESD nu biam.

HI PS agbalẽ na Dzoxɔxɔ ƒe Nɔnɔmewɔwɔ

Dzoxɔxɔ ƒe wɔwɔme nye dɔwɔwɔ vevitɔwo dometɔ ɖeka na High Impact Polystyrene agbalẽ dzi nyawo .

Le dzoxɔxɔ ƒe wɔwɔme me la, wodoa dzo HIPS agbalẽ dzi nyawo vaseɖe esime wòate ŋu abɔbɔ nyuie eye emegbe wowɔae ɖe aŋɔ ŋu to yaƒoƒo, nyaƒoɖeamenu alo mɔ̃ ƒe kpekpeɖeŋu zazã me.

Dɔwɔwɔwo dometɔ aɖewoe nye mɔ̃wo ƒe xɔmenuwo, nubablɛwo traywo dzi , nukpɔkpɔ ƒe akpawo, ʋu ƒe akpa siwo le eme, aƒewo, nutsyɔnuwo kple akpa bubu siwo wowɔ.

Le akpa siwo wohe goglo gome la, ele be nuƒlelawo nana agbalẽ dzi nyawo ƒe titrime gbãtɔ, do ƒe goglome, nutata ƒe sɔsɔme, aŋɔ ƒe didime kple gli ƒe titrime si wowu enu ale be woate ŋu ada gɔmedzedze ƒe dzidzenu la kpɔ.

HI PS agbalẽ na Vacuum wɔwɔ

Wotia HIPS enuenu na vacuum wɔwɔ elabena grade siwo sɔ ateŋu awɔ akpa etɔ̃ ƒe akpa siwo me kɔ tsitotsito to wɔwɔme ƒe ɖoɖo siwo le tẽ vie zazã me.

Ele be woada vacuum-wɔwɔ ƒe dɔwɔwɔ kpɔ to aŋɔ ŋutɔŋutɔ, dzoxɔxɔ ƒe ɖoɖo kple wɔwɔme ƒe goglome zazã me elabena keke fũ ate ŋu aɖe gli ƒe titrime dzi akpɔtɔ le dzogoewo kple do goglowo me.

Hafi woawɔe le agbɔsɔsɔ gã me la, dodokpɔ akpa aɖe gɔmeɖeɖe, gli-titrime mama, shrinkage, trimming, flatness kple mamlɛtɔ ŋusẽkpɔɖeamedzi dɔwɔwɔ.

HI PS agbalẽ na Agbalẽtata kple Dzesiwo

HIPS ateŋu ana anyigba si woateŋu ata si le gbadzaa na nuƒleƒe ƒe ɖeɖefiawo, dzesiwo, nɔnɔmetatawo ƒe akpawo, boblododoɖakawo kple akpa siwo woŋlɔ ŋkɔ na.

Le agbalẽtata ƒe ɖoɖoa nu la, dzesi siwo sɔ ate ŋu ado alɔ screen printing, UV alo digital printing kple asitsatsa ƒe agbalẽtata ƒe mɔnu bubuwo.

Agbalẽtata ƒe dɔwɔwɔ nɔ te ɖe anyigba ƒe ŋusẽ, anyigba ƒe dɔwɔwɔ, ink ƒe atikewɔwɔ, atikewɔwɔ ƒe mɔnu kple anyigba ƒe nuwuwu dzi. Ne corona ƒe atikewɔwɔ alo dyne ƒe agbɔsɔsɔ si woɖo ɖi hiã la, tsɔe de nuƒle ƒe nɔnɔmetata me tsɔ wu be nàsusui be HIPS ƒe hatsotso ɖesiaɖe ƒe anyigbadzidɔdamɔnu sɔ.

HIPS na Fridge Liners kple Mɔ̃wo ƒe Akpawo

Wobua High Impact Polystyrene ŋu geɖe na fridzi ƒe emenuwo kple mɔ̃wo ƒe dɔwɔwɔ elabena ate ŋu aƒo sesẽ, nuwɔwɔ ƒe ŋutete, anyigba ƒe dzedzeme kple ŋusẽkpɔɖeamedzi tsitretsitsi nu ƒu.

Nusiwo ateŋu awɔe nye fridzi ƒe emenuwo, agbatsɔkeke ƒe akpawo, mɔ̃wo ƒe xɔwo, nutsyɔnuwo kple xɔmenuwo ƒe akpa siwo wotsɔ dzoxɔxɔ wɔe.

Ele be mɔ̃wo ƒe dɔwo nagblɔ dzoxɔxɔ si wozãna le dɔwɔwɔ me, atike si wotsɔna klɔa nu alo atike si woatsɔ awɔ dɔe, nusiwo hiã be woaƒoe, amadede, keklẽ, wɔwɔme ƒe goglome kple mɔ̃a ƒe dzidzenu ɖesiaɖe si sɔ.

HI PS agbalẽ na Nubablɛwo kple Trays

Woateŋu awɔ HIPS agbalẽ dzi nyawo tsɛ wòazu dzoxɔxɔ ƒe nɔnɔme ɖe traywo dzi , nusiwo wotsɔ de eme, ametakpɔnu babla, atsyɔ̃ɖomi ƒe babla kple dɔwɔƒewo ƒe akpa ƒe babla me.

Ele be nubablɛ ƒlelawo naɖe nuwɔwɔ ƒe goglome, akpa ƒe sesẽme, ŋusẽkpɔɖeamedzi ƒe nudidi, stackability, amadede kple nuɖuɖu-kadodo, atike alo elektrɔnik-babla ƒe nudidi ɖesiaɖe gɔme hafi atia dzesi.

ESD HI PS agbalẽ na Elektrɔnik Nubablɛwo

HSQY ƒe ameyibɔ ESD HIPS nuwɔna nye nusi wowɔ na dzoxɔxɔ ƒe elektrɔnik bablawo abe IC traywo dzi , semiconductor traywo dzi , PCB kple PCBA traywo dzi , FPC tsɔlawo, SMT akpa traywo dzi kple ametakpɔnu akpa babla.

ESD ƒe atike si woɖo ɖi fifia la li le eƒe titrime si ade milimeta 0.2–1.8 me eye woateŋu atsɔe ana le agbalẽ dzi nyawo alo agbalẽ xatsaxatsa ƒe nɔnɔme siwo wowɔ ɖe ɖoɖo nu me.

Esi wònye be dzoxɔxɔ ƒe wɔwɔme ateŋu akeke nusi wotsɔ wɔe eye wòatrɔ teƒea ƒe gli ƒe titrime ta la, ele be woaɖo kpe ESD ƒe dɔwɔwɔ dzi le esi wowɔ vɔ agbagbadzɛ dzi ne elektrikŋusẽ ƒe tsitretsitsi le vevie ŋutɔ.

Yevu, Yevu kple Amadede Polystyrene (HIPS) ƒe Agbalẽvi Siwo Kpɔa Ŋusẽkpɔɖeamedzi Gãwo

Amadede	Tiatia ƒe Mɔfiame si bɔ
Yevu HIPS	Mɔ̃wo ƒe xɔmenuwo, agbalẽtata, dzesiwo, nukpɔkpɔwo kple nusiwo wotsɔ dzoxɔxɔ wɔe
Ameyibɔ HIPS	Dɔwɔƒewo ƒe nutsyɔnu, nusiwo woɖena fiana, nusiwo wowɔ kple elektrɔnik nubablɛ tɔxɛwo
Amadede HIPS ƒe amadede.	Asitsaƒewo ƒe ɖeɖefiawo, nusiwo wotsɔ ŋkɔ na, ​​atsyɔ̃ɖoɖo ƒe akpawo kple nusiwo wowɔ koŋ ƒe dɔwɔwɔ
Amadede si Wowɔ Ðe Ðoɖo Nu	Woateŋu aƒo nu tso amadede ƒe sɔsɔ ŋu to kpɔɖeŋu ŋutɔŋutɔ, amadede ƒe nufiame alo taɖodzinu si dzi woda asi ɖo zazã me

Alesi Nàtia HI PS agbalẽ Titrime

HIPS ƒe titrime nyuitɔ nɔ te ɖe akpa ƒe lolome, wɔwɔme ƒe goglome, sesẽ si hiã, ŋusẽkpɔɖeamedzi si hiã, agbalẽtata ƒe ɖoɖo kple ewɔwɔ ƒe mɔnu dzi.

Thickness Range	Tiatia Gbãtɔ ƒe Mɔfiame
0.2–0.5 mm	Nubablɛ tsɛwo, elektrɔnik traywo dzi , nusiwo wotsɔ de eme kple dzoxɔxɔ ƒe dɔwɔwɔ siwo le bɔbɔe
0.5–1.0 mm ƒe didime	Packaging traywo dzi , agbalẽ siwo wota, ɖeɖefiawo kple akpa siwo wowɔ siwo ƒe kpekpeme le bɔbɔe
1.0–2.0 mm ƒe didime	Akpa siwo lolo wu siwo wotsɔ dzoxɔxɔ wɔe, mɔ̃a ƒe akpa aɖewo, nukpɔkpɔwo kple ametakpɔnu nutsyɔnuwo
2.0–4.0 mm ƒe didime	Dzesi siwo sesẽ wu, akpa siwo wowɔ, liners kple dɔwɔƒewo ƒe akpa siwo wowɔ
4.0–6.0 ƒe didime	Heavy-gauge formed alo fabricated dɔwɔwɔ siwo hiã be woadze egɔme- agbalẽ dzi nyawo sesẽ wu

Le dzoxɔxɔ ƒe wɔwɔme gome la, ele be woatia gɔmedzedze ƒe titrime to akpa si wowu ƒe geometry zazã me elabena nutata goglo ate ŋu aɖe teƒea ƒe gli ƒe titrime dzi akpɔtɔ ŋutɔ.

4 × 8 HI PS agbalẽ

HSQY naa dzidzenu 1220 × 2440 mm HIPS agbalẽ dzi nyawo s , si woyɔna zi geɖe be anɔ abe afɔ 4 × 8 agbalẽ dzi nyawo s.

Nɔnɔme sia ɖea vi na mamalawo, dzesiwo wɔlawo, dzoxɔxɔdzidzenuwo kple fabricators siwo zãa agbalẽ dzi nyawo -dɔwɔwɔ ƒe dɔwɔnu siwo wozãna ɖaa.

Woate ŋu aƒo nu tso didime kple kekeme siwo wowɔ ɖe ɖoɖo nu siwo ade milimeta 1600 hã ŋu le titrime kple ewɔwɔ ƒe nudidiwo nu.

HI PS agbalẽ kple GP PS agbalẽ

Nɔnɔme	HIPS	GPPS
Nusiwo Wozãna ƒe Dɔwɔɖoɖo	Polystyrene si wotsɔ rababa trɔ asi le eŋu	Polystyrene si wozãna le mɔ gbadza nu
Dzedzeme	Zi geɖe la, me mekɔna o	Zi geɖe la, edzena le gaglãgbe eye wòklẽna
Tsitretsitsi ɖe Ŋusẽkpɔɖeamedzi Ŋu	Kɔkɔ wu le rababa ƒe tɔtrɔ ta	Brittle wu
Tiatia Vevietɔ	Sesẽme, wɔwɔme kple agbalẽtata	Nuwɔwɔ le gaglãgbe, sesẽ kple ganyawo me kɔ agbalẽ dzi nyawo
Dɔwɔwɔ Siwo Wozãna Zi geɖe	Thermoformed traywo dzi , nusiwo woɖena fiana, mɔ̃wo ƒe ʋuƒo kple nusiwo wota	Nukpɔkpɔ siwo me kɔ, xɔmenuwo, xɔtunu siwo me kɔ kple atsyɔ̃ɖoɖo ƒe dɔwɔwɔwo

Ne èdi dɔ siwo bia be woatsɔ polystyrene si me kɔ si wozãna le mɔ gbadza nu la, lé ŋku ɖe míaƒe...        GPPS agbalẽ.

HI PS agbalẽ vs. ABS Agbalẽvi

Tiatia Nu	HIPS	ABS
Ðoƒe Siwo Woɖona Ðe Ðokuisi	Ganyawo ƒe wɔwɔme kple agbalẽtata ƒe nusiwo woatsɔ awɔ dɔ siwo le titina	Engineering thermoplastic na dɔwɔwɔ siwo bia be woada asɔ le ŋusẽ, sesẽme kple dzoxɔxɔ ƒe dɔwɔwɔ me
Dzoxɔxɔ ƒe nɔnɔmewɔwɔ	Wozãnɛ le afisiafi na nusiwo wotsɔ dzoxɔxɔ wɔe siwo mexɔ asi o	Azɔ hã zi geɖe la, wowɔa dzoxɔxɔ ƒe nɔnɔme na akpa siwo bia nu geɖe wu
Agbalẽtata	Dɔwɔwɔ sesẽ si sɔ kple agbalẽtata-grade ƒe anyigba si sɔ	Agbalẽtata nɔ te ɖe ABS ƒe anyigba kple dɔwɔwɔ ƒe nudidiwo dzi
Nyametsotso Si Wowɔna Le Nuƒle Ŋu Si Bɔbɔe	Tia ɣeyiɣi si me ganyawo ƒe ɖoɖowɔwɔ kple agbalẽtata nye nu vevitɔwo	Da asɔ ne akpa si wowɔ vɔ la bia be woawɔ mɔ̃ɖaŋudɔ si de ŋgɔ wu

Ne èdi mɔ̃ɖaŋununya-plastik zazã siwo bia nu geɖe wu la, tsɔ dɔa ƒe nudidiwo sɔ kple míaƒe...        ABS ƒe Agbalẽwo.

Seɖoƒe Vevi Siwo Le HI Ŋu PS agbalẽ

HIPS nye nusi woate ŋu azã le mɔ vovovowo nu, gake mele be woawɔ nu ɖe ​​eŋu le eɖokui si abe mɔ̃ɖaŋununya ƒe plastik ene na nuto ɖesiaɖe o.

UV-nukpɔkpɔ le gota

Standard HIPS ƒe UV ƒe tsitretsitsi ɣeyiɣi didi seɖoƒe li na. Ele be woazã atike si wozãna le gota si me UV-si li ke alo nu bubu si te ŋu nɔa te ɖe yame ƒe nɔnɔme nu wu ne wole mɔ kpɔm be ɣe ƒe keklẽ nanɔ ye ŋu ɣeyiɣi didi.

Dzoxɔxɔ Kɔkɔe ƒe Dɔwɔwɔwo

HIPS mele be woatsɔ nusiwo ƒe ŋkɔ koe atia na dzoxɔxɔ si kɔ ƒe dɔwɔwɔwo o. Tsɔ dzoxɔxɔ si yia edzi kple esi de ŋgɔ wu ale be woate ŋu ada dzeside ŋutɔŋutɔ kpɔ.

Atikewo ƒe Agbɔsɔsɔme

Atikewo ƒe tsitretsitsi nɔ te ɖe nusi le eme, eƒe agbɔsɔsɔme, dzoxɔxɔ kple nuteɖeamedzi si wotsɔ de akpa si wowɔ vɔ dzi. Do atike siwo wotsɔna klɔa nu ŋutɔŋutɔwo, amiwo, atike siwo wotsɔna tsia dɔlékuiwo nu alo atike siwo wotsɔ wɔa dɔe kpɔ hafi nàda asi ɖe wo dzi mlɔeba.

Nuɖuɖu-Kadodo HI PS agbalẽ

Mele be woaɖɔ dɔwɔƒe si wozãna ɖaa HIPS le eɖokui si be ewɔ ɖeka kple nuɖuɖu ƒe kadodo o.

Ne woazã HIPS na nuɖuɖu ƒe bablawo, fridzi me nuɖuɖu-kadodo ƒe akpawo alo dɔ bubu siwo ŋu wowɔ ɖoɖo ɖo la, na asi si me woayi, nuɖuɖu ƒomevi, kadodo ƒe nɔnɔmewo kple ɖoɖo si hiã hafi nàtia nusi woatsɔ awɔe.

Ele be woaɖo kpe sedziwɔwɔ ŋuti nuŋlɔɖiwo dzi na aŋɔ ƒe wɔwɔme si tututu wotsɔ na, ​​amadede kple eƒe hatsotso.

Ale Si Nàtia HI Nyuitɔ PS agbalẽ

1. Ðe Dɔwɔwɔa gɔme

Tsɔ dzoxɔxɔ ƒe wɔwɔme, vacuum ƒe wɔwɔme, agbalẽtata, fridzi ƒe nutrenu, mɔ̃a ƒe akpa aɖe, nubablɛwo, dzesiwo, nukpɔkpɔ alo elektrɔnik nubablɛwo gblɔ.

2. Tia Standard alo ESD HIPS

Dzidzenu HIPS sɔ na nuwɔwɔ kple agbalẽtata le xexeame katã, esime elektrɔnik nubablɛwo ateŋu abia be woaɖe anti-static, dissipative alo conductive grade si woɖe fia.

3. Ðo kpe Titrime dzi

HSQY naa dzidzenu HIPS fifia le abe 0.2–6 mm ene. Ele be woada akpa siwo wotsɔ dzoxɔxɔ wɔe la kpɔ le gli ƒe titrime mamlɛtɔ nu eye woahe woƒe goglome.

4. Ðo kpe Agbalẽvi ƒe Agbɔsɔsɔ alo Roll Format dzi

Dzesi 1220 × 2440 mm agbalẽ dzi nyawo s li. Na mɔ̃a ƒe kekeme, aŋɔ ƒe lolome alo agbalẽ dzi nyawo ƒe didime siwo wobia tso esi wu enu hena etsɔtsɔ si wowɔ ɖe ɖoɖo nu.

5. Tia Amadede

Tsɔ amadede ɣi, yibɔ alo amadede si nèdi. Na kpɔɖeŋu ŋutɔŋutɔ si dzi woda asi ɖo alo amadede ƒe nufiame si wonya ne ehiã be amadede ƒe sɔsɔ kplikplikpli.

6. Ðo kpe Agbalẽtata ƒe Nudidiwo Dzi

Na agbalẽtatamɔnu, nuŋlɔtsi ƒe ɖoɖo, anyigbadzidɔwɔwɔ si hiã kple dyne si hiã le afisi wòsɔ le.

7. Ðo kpe Thermoforming ƒe Nudidiwo dzi

Na wɔwɔme ƒe goglome, aŋɔ ƒe didime, vacuum alo nyaƒoɖeamenu wɔwɔ ƒe ɖoɖo kple gli ƒe titrime si wowu enu si hiã.

8. Ðo kpe Subɔsubɔdɔ ƒe Nɔnɔme dzi

Gblɔ xɔme alo gota zazã, subɔsubɔ ƒe dzoxɔxɔ, atikewo ƒe agbɔsɔsɔ kple mɔ̃wo ƒe ŋusẽkpɔɖeamedzi ƒe nudidiwo.

9. Ðo kpe Ðoɖowɔɖi ƒe Nudidiwo dzi

Ne nuɖuɖu ƒe kadodo, elektrɔnikmɔ̃wo, dzo ƒe dɔwɔwɔ alo nudidi bubu si ŋu wowɔ ɖoɖo ɖo le dɔ wɔm la, de dzesi dzidzenua tututu hafi nàda asi ɖe nuwo dzi.

10. Do Nuwɔwɔ ƒe Kpɔɖeŋu aɖe kpɔ

Da nuawo kpɔ kple agbalẽtata, ewɔwɔ, lãɖeɖe alo eƒoƒoƒu ƒe ɖoɖo ŋutɔŋutɔ hafi nàda asi ɖe nudɔdɔ gã aɖe si wowɔ ɖe ɖoɖo nu dzi.

Custom HI PS agbalẽ Adzɔnuwo wɔwɔ

HSQY doa alɔ HIPS agbalẽ dzi nyawo dɔ siwo wowɔ ɖe ɖoɖo nu na dzoxɔxɔdzidzenuwo, mɔ̃wo wɔlawo, nubablɛ dɔwɔƒewo, agbalẽtaƒewo, dzesiwo wɔlawo, elektrɔnik-nubablɛwo dzralawo kple plastik mamalawo.

Tiatia siwo wowɔ ɖe ɖoɖo nu ate ŋu anye:

• Dekɔnu ƒe titrime le ewɔwɔ ƒe dometsotso si sɔ me

• 1220 × 2440 mm ƒe dzidzenu agbalẽ dzi nyawo s

• agbalẽ dzi nyawo ƒe didime siwo wowɔ ɖe ɖoɖo nu

• Kekeme siwo ade milimeta 1600 na nusiwo wozãna fifia

• Yevu kple ameyibɔ HIPS

• Amadede siwo wowɔ ɖe ɖoɖo nu

• Agbalẽtata ƒe anyigba siwo wozãna koŋ

• Dzoxɔxɔ ƒe wɔwɔme kple vacuum-wɔwɔ ƒe dzesiwo

• Black ESD HIPS agbalẽ dzi nyawo kple agbalẽ xatsaxatsa

• Panel siwo wotso ɖe woƒe lolome nu

• Ku lãɖeɖe

• CNC lãɖeɖe

• Tomekuku

• Agbalẽtata kple laminating ƒe nudidiwo

• Nubablɛ siwo wowɔ ɖe ɖoɖo nu siwo wotsɔ ɖoa ​​duta

HI PS agbalẽ Dzɔdzɔmeŋusẽdzikpɔkpɔ

Dzodzro kple mɔɖeɖe ƒe nɔnɔme veviwo ate ŋu anye:

• Sheet ƒe titrime kple mɔɖeɖe ɖe nu ŋu

• Kekeme kple didime ƒe mɔɖeɖe ɖe nu ŋu

• Sheet ƒe gbadzaƒe

• Amadede ƒe ɖekawɔwɔ

• Anyigba ƒe dzedzeme

• Ŋusẽkpɔɖeamedzi ƒe dɔwɔwɔ le afisi wogblɔe le

• Sesẽmewɔwɔ

• Dzoxɔxɔ ƒe dɔwɔwɔ

• Shrinkage le wɔwɔ vɔ megbe le afisi wòsɔ le

• Agbalẽtata ƒe adhesion le afisi wòhiã le

• Atikewɔwɔ le anyigba dzi le afisi wogblɔe le

• ESD ƒe anyigba ƒe tsitretsitsi le afisi wòhiã le

• Lãɖeɖe kple ewɔwɔ ƒe didimewo

• Packing kple pallet ƒe nɔnɔme

Nubablɛwo Kple Dukɔwo Dome Nuwo Ðoɖoɖa

HIPS agbalẽ dzi nyawo s ateŋu abla ɖe agbalẽ dzi nyawo lolome, titrime, anyigba kple ʋuɖoɖo ƒe nudidiwo nu.

Woate ŋu aƒo nu tso ametakpɔnu babla, kraft pepa, PE film, kakɛwo alo palletized export packaging ŋu le adzɔnu ƒe nɔnɔme si ŋu woɖo kpee nu.

Le rollstock alo thin-gauge nu gome la, na roll ƒe kekeme si hiã, roll ƒe kpekpeme, nu vevi siwo hiã kple thermoforming-machine ƒe seɖoƒewo hafi nàwɔe.

Nukatae Nàtia HSQY abe Wò HI PS agbalẽ Dɔwɔƒe ene?

0.2–6 mm Standard Range: HSQY ƒe fifi dzidzenu HIPS nuwɔna tsyɔa thin-gauge wɔwɔmenuwo to kpekpe wu fabricated agbalẽ dzi nyawo s.

4 × 8 Sheet Supply: Standard 1220 × 2440 mm HIPS agbalẽ dzi nyawo s li na mamalawo, dzoxɔxɔdzidzenuwo, agbalẽtalawo kple ewɔlawo.

Amadede Siwo Wotrɔ Asi Le: Woate ŋu aƒo nu tso amadede ƒe nudidi siwo le yevu, yevu, amadede kple dɔa koŋ ŋu.

Thermoforming Dɔwɔwɔwo: Woate ŋu atia nusiwo woatsɔ awɔ vacuum kple thermoforming le titrime, akpa ƒe geometry kple wɔwɔ ƒe goglome nu.

Agbalẽtata ƒe Dɔwɔwɔwo: Woateŋu ana HIPS na dzesiwo, nɔnɔmetatawo kple ɖeɖefiadɔwo le afisiwo agbalẽtata kple ewɔwɔ le vevie le.

ESD HIPS : HSQY hã naa ESD yibɔ HIPS na elektrɔnik nubablɛdɔwo siwo hiã na static-control dɔwɔwɔ si woɖe fia.

Dɔwɔwɔ ɖe ɖoɖo nu: Woate ŋu adzro lãɖeɖe, ku lãɖeɖe, CNC wɔwɔ, agbalẽtata kple dɔwɔwɔ ƒe nudidi bubuwo me le nɔnɔmetatawo kple kpɔɖeŋuwo nu.

Nusiwo Wozãna Bubuwo: HSQY hã naa nu        GPPS agbalẽ        na polystyrene zazã siwo me kɔ kple        ABS Sheets        na dɔ siwo bia be woada asɔ le mɔ̃ɖaŋununya kple dɔwɔwɔ me si to vovo.

Nyatakaka Si Hiã Na HI PS agbalẽ Nyayɔyɔ

Mᴐbibia	Thermoforming, agbalẽtata, fridzi ƒe nutrenu, nubablɛ, dzesiwo, nukpɔkpɔ, elektrɔnikmɔ̃wo alo dɔ bubu aɖe wɔwɔ
HIPS Dzeside	Standard, agbalẽtata, forming, ESD alo kafukafu hiã
Eƒe titrime	Wobia be wòanye titrime kple mɔɖeɖe ɖe nu ŋu
Agbalẽvi ƒe Agbɔsɔsɔme	1220 × 2440 mm alo kekeme si wowɔ ɖe ɖoɖo nu × didime
Nuwo Nana ƒe Agbalẽvi	Flat agbalẽ dzi nyawo , lã agbalẽ dzi nyawo alo rollstock le afisi wòle
Amadede	Amadede ɣi, yevu alo esi wowɔ ɖe ɖoɖo nu
Anyigbadzi / Agbalẽtata	Agbalẽtata ƒe ɖoɖo, anyigba ƒe nuwuwu, corona ƒe dɔwɔwɔ alo dyne ƒe nudidi le afisi wòsɔ le
Dzoxɔxɔ ƒe nɔnɔmewɔwɔ	Forming goglome, aŋɔ ƒe didime, dɔwɔwɔ kple bia wu gli titrime
ESD ƒe Nudidi	Taɖodzinu anyigba ƒe tsitretsitsi, dodokpɔ mɔnu kple nɔnɔme nɔnɔme le afisi wòhiã
Sedede ƒe Nudidi	Nuɖuɖu-kadodo, dzobibi, elektrɔnikmɔ̃wo alo dzidzenu bubu si sɔ
Agbɔsɔsɔ	Dodokpɔ ƒe agbɔsɔsɔ, nudɔdɔ ƒe agbɔsɔsɔme si wobu edziedzi kple ƒe sia ƒe ƒe didi si wobu
Deƒe	Dukɔ si me woayi kple melidzeƒea

HI PS agbalẽ Nyabiasewo

Nukae HIPS tsi tre ɖi na?

HIPS tsi tre ɖi na High Impact Polystyrene. Enye polystyrene si ŋu wotrɔ asi le kple rababa ƒe akpa aɖe be wòana eƒe sesẽme kple eƒe ŋusẽkpɔɖeamedzi nanyo ɖe edzi ne wotsɔe sɔ kple polystyrene si wozãna le mɔ gbadza nu.

Nukae wozãa HIPS agbalẽ dzi nyawo na?

HIPS agbalẽ dzi nyawo s wozãna na dzoxɔxɔ ƒe nɔnɔme traywo dzi , fridzi ƒe nutrenuwo, mɔ̃wo ƒe akpa aɖewo, nɔnɔmetata siwo wota, dzesiwo, ɖeɖefiawo, nubablɛwo, dɔwɔƒewo ƒe nutsyɔnuwo kple elektrɔnik nubablɛ tɔxɛwo.

Ðe HIPS sɔ kple polystyrene si wozãna ɖaa?

Ao, HIPS nye polystyrene ƒomevi si wotsɔ rababa trɔ asi le si wowɔ be wòasesẽ wu. GPPS zi geɖe la, esẽna wu eye wòdzena gake egagbãna wu.

Vovototo kae le HIPS kple GPPS dome ?

Zi geɖe la, wotiaa HIPS na ŋusẽkpɔɖeamedzi ƒe tsitretsitsi, dzoxɔxɔ ƒe nɔnɔme kple agbalẽtata. GPPS nye esi wotia zi geɖe na dɔwɔwɔ siwo me kɔ kple esiwo le keklẽm le afisiwo wòhiã be eme kɔ wu.

Vovototo kae le HIPS kple ABS dome?

Wotiaa HIPS zi geɖe hena dzoxɔxɔ ƒe nɔnɔme kple agbalẽtata ƒe dɔwɔwɔ siwo me ga mele o, esime woateŋu ada ABS kpɔ ne dɔ aɖe bia be woada asɔ le mɔ̃ɖaŋununya ƒe ŋusẽ, sesẽme kple dzoxɔxɔ ƒe dɔwɔwɔ me.

Ðe woate ŋu awɔ HIPS agbalẽ dzi nyawo dzoxɔxɔ ƒe nɔnɔmea?

Ɛ̃. Dzoxɔxɔ ƒe wɔwɔme nye dɔwɔwɔ veviwo dometɔ ɖeka na HIPS . Woateŋu awɔe wòazu traywo dzi , liners, covers, housings kple akpa etɔ̃ bubu geɖewo.

Ðe woate ŋu awɔ HIPS agbalẽ dzi nyawo le vacuum mea?

Ɛ̃. Woate ŋu awɔ HIPS dzesi siwo sɔ la le vacuum me. Ele be ewɔwɔ dodokpɔ naɖo kpe aŋɔ ƒe gɔmesese, gli ƒe titrime mamlɛtɔ, eƒe ʋuʋu kple eƒe akpa si wowu enu ƒe dɔwɔwɔ dzi.

Ðe woate ŋu ata HIPS agbalẽ dzi nyawo a?

Ɛ̃. HIPS nye esi wozãna geɖe na dzesiwo kple nɔnɔmetata siwo wota. Agbalẽtata ƒe sɔsɔ nɔ te ɖe anyigba, nuŋlɔtsi, dɔyɔyɔ ƒe mɔnu kple nenye be corona alo anyigbadzidɔwɔwɔ bubu aɖe hiã dzi.

Titrime kae HIPS agbalẽ dzi nyawo HSQY naa?

HSQY ƒe fifi dzidzenu HIPS adzɔnuwo ƒe ƒomea xɔa abe 0.2–6 mm, si me 0.5 mm, 1 mm kple 2 mm agbalẽ dzi nyawo s siwo woɖe fia hã le.

Ðe HSQY naa 4 × 8 HIPS agbalẽ dzi nyawo s?

Ɛ̃. HSQY naa 1220 × 2440 mm HIPS agbalẽ dzi nyawo s, si wogblɔna zi geɖe be anɔ abe afɔ 4 × 8 ene.

Nukae nye HIPS agbalẽ dzi nyawo ƒe kekeme si sɔ gbɔ wu?

Fifia ƒe dzidzenu HSQY HIPS adzɔnuwo ƒe axawo ŋlɔ kekeme siwo ade 1600 mm. Kpɔ kekeme si sɔ gbɔ wu si li dzi na titrime si hiã hafi nàbia.

HIPS agbalẽ dzi nyawo ƒe amadede kawoe li?

HSQY naa yevu, yevu, amadede kple amadede tɔxɛ HIPS agbalẽ dzi nyawo s.

Ðe HSQY naa ESD HIPS agbalẽ dzi nyawo ?

Ɛ̃. HSQY naa ameyibɔ ESD HIPS nuwɔna fifia si ƒe titrime anɔ abe 0.2–1.8 mm ene na elektrɔnik nubablɛ ƒe dɔwɔwɔ tiatia aɖewo.

Ðe anti-static HIPS kple conductive HIPS sɔa ?

Ao, nusiwo tsi tre ɖe nusiwo meʋãna o, nusiwo kakana kple esiwo kplɔa nu ŋu fia elektrikŋusẽ ƒe dɔwɔwɔ ƒe didime vovovowo. Gblɔ anyigba ƒe tsitretsitsi kple dodokpɔmɔnu si hiã hafi nàtia nusi woatsɔ awɔe.

Ðe woate ŋu awɔ dzoxɔxɔ ƒe nɔnɔme na ESD HIPS a?

Ɛ̃. HSQY ƒe ESD HIPS nuwɔna si li fifia la nye esi woɖo na elektrɔnik traywo dzi kple akpa siwo tsɔa dzoxɔxɔ ƒe nɔnɔme. Ele be woado elektrikŋusẽ ƒe dɔwɔwɔ hã kpɔ le ewɔwɔ vɔ megbe.

Ðe HIPS sɔ na gota zazãa?

Standard HIPS ƒe tsitretsitsi ɖe UV ƒe ɣeyiɣi didi ŋu seɖoƒe li na. Ele be gotagomedɔwo nagblɔ dzesi si sɔ si UV-si li ke alo woada aŋe bubu si te ŋu nɔa te ɖe yame ƒe nɔnɔme nu la akpɔ.

Ðe HIPS te ŋu nɔa te ɖe dzoxɔxɔ nua?

HIPS naa dɔwɔwɔ si ŋu viɖe le na xɔme ƒe dzoxɔxɔ kple dzoxɔxɔ si sɔ ƒe dɔwɔwɔ geɖe, gake mele be woawɔ nu ɖe ​​eŋu abe dzoxɔxɔ gã ƒe mɔ̃ɖaŋudɔwɔwɔ ƒe plastik ene o. Gblɔ dzoxɔxɔ si hiã le dɔwɔwɔ me hafi nàtia dzeside aɖe.

Ðe HIPS sɔ na fridzi ƒe ʋuƒoa?

HIPS wobua zi geɖe na fridzi ƒe ememe liners kple mɔ̃ ƒe akpawo le eƒe wɔwɔme ƒe dɔwɔwɔ, sesẽme kple sesẽme ƒe ƒuƒoƒo ta. Ele be woada asi ɖe mɔ̃a ƒe nɔnɔme si sɔ pɛpɛpɛ dzi kokoko.

Ðe HIPS nuɖuɖu le dediea?

Nuɖuɖu-kadodo ƒe dzedzeme nɔa te ɖe klass aɖe koŋ dzi. Mègasusu be dɔwɔƒe ɖesiaɖe HIPS agbalẽ dzi nyawo sɔ na nuɖuɖu ƒe kadodo o. Ðo kpe atike si tututu wowɔ kple asi si woayi ƒe sedede si hiã dzi hafi nàbia.

Ðe woate ŋu atso HIPS agbalẽ dzi nyawo ahaku doa?

Ɛ̃. HIPS ateŋu atsoe, awɔ CNC mɔ̃, aku, atso ku eye woawɔe to plastic-dɔwɔwɔ ƒe dɔwɔnu siwo sɔ zazã me.

Ðe HSQY ate ŋu atrɔ asi le HIPS agbalẽ dzi nyawo ƒe lolomewo ŋua?

Ɛ̃. Woateŋu adzro dzidzenu 1220 × 2440 mm agbalẽ dzi nyawo s kple didime, titrime, kekeme kple amadede siwo wowɔ ɖe ɖoɖo nu me le dɔa ƒe nudidiwo nu.

Ðe HSQY ate ŋu asɔ kple HIPS kpɔɖeŋu si li xoxoa?

Woate ŋu ada kpɔɖeŋu si li xoxo la akpɔ ɖekae kple eƒe titrime, amadede, eƒe gogloƒe, eƒe wɔwɔme, eƒe agbalẽtata kple eƒe dɔwɔwɔ ƒe nudidiwo be woakpɔ nɔnɔme si sɔ.

Ðe mate ŋu abia HIPS kpɔɖeŋuwoa?

Woateŋu adzro kpɔɖeŋu siwo li me hena dodokpɔ le titrime, amadede, anyigba, agbalẽtata, dzoxɔxɔ ƒe nɔnɔme kple dɔwɔwɔ ƒe dɔwɔwɔ hafi nudɔdɔ le agbɔsɔsɔ gã me.

Nyatakaka kawoe wòle be mana na HIPS nyayɔyɔ?

Na dɔwɔwɔ, titrime, kekeme kple didime, amadede, agbalẽ dzi nyawo alo agbalẽ xatsaxatsa ƒe nudidi, agbalẽtata alo wɔwɔme ƒe ɖoɖo, ESD ƒe nudidi le afisi wòsɔ le, agbɔsɔsɔ kple teƒe si woayi.

Bia HI PS agbalẽ Nyayɔyɔ

Èle si ŋu kakaɖedzi le dim be HIPS agbalẽ dzi nyawo dɔwɔƒe , yeawɔ polystyrene si kpɔa ŋusẽ gã aɖe ɖe ame dzi alo nusi wowɔ ɖe ɖoɖo nu na dzoxɔxɔ ƒe wɔwɔme, vacuum wɔwɔ, agbalẽtata, mɔ̃ alo elektrɔnik-babla dɔwo?

Ðo HSQY wò titrime si nèdi, agbalẽ dzi nyawo didime, amadede, wɔwɔme alo agbalẽtata ƒe ɖoɖo kple nuƒle ƒe agbɔsɔsɔ si wobu. Le ESD ƒe bablawo gome la, de anyigba ƒe tsitretsitsi kple dodokpɔmɔnu si hiã la eme ale be woate ŋu ada nusi sɔ la kpɔ.