ʻO nā mea hana kiʻiʻoniʻoni Lidding 12 kiʻekiʻe loa i ka makahiki 2026

Pehea mākou i koho ai i kēia mau mea hana kiʻiʻoniʻoni Lidding

Pono kahi hoʻohālikelike mea hoʻolako pono e ʻoi aku ma mua o ka nui o ka ʻoihana. ʻO ke kūpono o kahi mea hana kiʻiʻoniʻoni uhi e pili ana i ka hiki iā ia ke hāʻawi i kahi sila hiki ke hana hou ʻia ma ka pā maoli o ka mea kūʻai, ka huahana a me ka laina hoʻopili.

Ua hoʻohana ʻia nā pae hoʻohālikelike penei:

• Waihona kiʻiʻoniʻoni uhi i hōʻoia ʻia: Hoʻopaʻa leo ka ʻoihana i nā huahana uhi a i ʻole nā ​​​​​​huahana sila pā.

• Ka hoʻohālikelike ʻana o ka pā: Kākoʻo no nā substrates e like me APET, RPET, CPET, PET/PE, PP, PE, HIPS, PVC, alumini a i ʻole ka pepa i uhi ʻia.

• Nā koho sila: ʻIli maʻalahi, ʻili waena, sila wili ʻia, sila laka, sila hou a i ʻole nā ​​ʻano peel-and-close.

• Ka hiki ke pale: Nā koho no ka hoʻopili ʻana i nā pale haʻahaʻa, waena a i ʻole kiʻekiʻe, me EVOH a me nā ʻano i uhi ʻia a i ʻole laminated.

• Nā hiʻohiʻona hana: Anti-fog, kū'ē i ka puncture, hoʻēmi, perforation, paʻi ʻana, pasteurization, retort a i ʻole ovenability.

• Hana ʻana a me ka hoʻopilikino ʻana: Ka hiki ke hoʻoponopono i ke ʻano o ke kiʻiʻoniʻoni, ka mānoanoa, ka laulā o ka ʻōwili, ka paʻi, ke ʻano o ka sila a me ka pae pale.

• Ka hoʻomohala ʻana i ka hoʻomau: Nā koho no ka hana hou ʻana, mono-material, downgauged, loaʻa i ka PCR a i ʻole nā ​​​​​​mea hou.

• ʻIke loea no ka hoʻohana ʻana: Hoʻohana ʻia i palapala ʻia i nā meaʻai i hoʻomākaukau ʻia, nā mea waiū, ka ʻiʻo, nā meaʻai kai, nā huahana, ka hale berena, ka meaʻai holoholona a i ʻole ka ʻōpala mālama ola.

Hōʻike ke kauoha ma lalo nei i ka pilina o ka mea kūʻai a me ka laulā o ka hiki, ʻaʻole ka loaʻa kālā i loiloi ʻia a i ʻole ka māhele mākeke.

1. Hui Palakiko HSQY

ʻOi loa no: ʻIli uhi i hana ʻia me nā pā meaʻai kūpono.

HSQY Plastic Group a he mea hoʻolako honua no nā kiʻiʻoniʻoni uhi pā meaʻai. Hoʻonohonoho ʻia kāna waihona e ka substrate tray, e maʻalahi ai i nā mea kūʻai ke hoʻomaka me ka mea ipu ma mua o ke kuhi ʻana i ke ʻano kiʻiʻoniʻoni e sila pono ai. He mea hana ma Kina ʻo

Nā lako HSQY nā kiʻiʻoniʻoni sila no nā pā PET, PET/PE, CPET a me PP. ʻO nā kūkulu i loaʻa e komo pū me PET/PE, BOPET/CPP, BOPET/PE a me nā kiʻiʻoniʻoni pale kiʻekiʻe e pili ana iā EVOH. Ma muli o ka noi, hiki ke hoʻomohala ʻia nā kiʻiʻoniʻoni me nā hiʻohiʻona maʻalahi-peel, anti-fog, pale kiʻekiʻe a i ʻole nā ​​​​​​hiʻohiʻona paʻi.

ʻO kahi pōmaikaʻi nui ka hiki iā HSQY ke hoʻolako i ka ʻili uhi a me ka pā paʻa e pili ana. ʻO kāna laulā ākea o nā ʻōpala meaʻai e komo pū me CPET, PET, PET/EVOH/PE, PP a me PP/EVOH/PE trays. ʻO ke kūʻai ʻana i nā ʻāpana ʻelua mai hoʻokahi mea hoʻolako hiki ke hoʻomaʻalahi i nā hoʻokolohua hoʻohālikelike sila a hoʻemi i ka pilikia o ka kūlike ʻole ma waena o ka flange tray a me ka papa sealant.

He mea pili loa ʻo HSQY i nā mea hana meaʻai mākaukau, nā mea hoʻolaha ʻōpala meaʻai a me nā lama e ʻimi nei i nā ana OEM, nā kikoʻī ʻōwili maʻamau, nā laʻana a me ke kākoʻo hoʻokuʻu aku. Pono nā mea kūʻai e hāʻawi i kā lākou mea pā, ke ʻano huahana, ka mahana sila, ka ikaika ʻili i makemake ʻia a me ke koi ola papa i ka wā e noi ai i kahi ʻōlelo aʻoaʻo.

2. ʻAmcor

ʻOi loa no: Nā papahana hoʻopili honua nui e koi ana i ka lako honua a me ke kākoʻo ʻepekema mea.

Hāʻawi ʻo Amcor i nā sila uhi i hoʻolālā ʻia no nā substrates packi paʻa i hoʻohana pinepine ʻia. Loaʻa i kāna waihona nā koho e hana ana i nā sila hiki ke wehe ʻia i PE, HDPE, PP, HIPS, PVC a me PET.

Hoʻoikaika ka ʻoihana i ka machinability, ka ikaika peel i kāohi ʻia a me ka hana sila. Hiki i nā hui loea ke hoʻomohala i nā hoʻonā maʻamau no nā huahana a i ʻole nā ​​​​kūlana hoʻopiha i hiki ʻole ke lawelawe ʻia e kahi kiʻiʻoniʻoni maʻamau.

Ua hoʻopau ʻo Amcor i kāna hui pū ʻana me Berry Global i ʻApelila 2025. No laila, pono i nā mea kūʻai e noiʻi ana i ka mākeke 2026 ke mālama i nā hiki mua o Amcor lāua ʻo Berry ma ke ʻano he ʻāpana o hoʻokahi hui mea hoʻolako ākea ma mua o ʻelua mau mea hana kūʻokoʻa.

He moho ikaika ʻo Amcor no nā papahana meaʻai nui, nā huahana waiū, nā lawelawe olakino a me nā papahana hoʻopili mea kūʻai aku e pono ai ka hana ʻana ma nā wahi he nui, ka hōʻoia loea a me ka hoʻomau ʻana o ka lako. Pono nā mea kūʻai liʻiliʻi e hōʻoia i ka nui liʻiliʻi, nā manawa hoʻomohala a me kahi o ka hale hana e lawelawe ana i kā lākou mākeke.

3. Ea Paʻa

ʻOi loa no: ʻŌpala lewa i hoʻololi ʻia, nā protein hou a me nā meaʻai i mākaukau.

Ua hoʻolālā ʻia nā kiʻiʻoniʻoni uhi CRYOVAC a Sealed Air no nā pā paʻa i hoʻohana ʻia ma MAP a me nā ʻōnaehana hoʻopili meaʻai ʻē aʻe. Hoʻoikaika ka laulā i ka pale oxygen, ka maopopo anti-fog, ke kū'ē ʻana i ka puncture a me ka hana mau i ka wā o ka hāʻawi ʻana i loko o ka friji.

ʻO nā hoʻonā i loaʻa e komo pū me nā kiʻiʻoniʻoni maʻemaʻe a paʻi ʻia, nā kiʻiʻoniʻoni pale kiʻekiʻe no ka ʻiʻo a me nā meaʻai kai, nā ʻano hiki ke hoʻopaʻa hou ʻia a me nā kiʻiʻoniʻoni no nā pā mono-PP, PET a me RPET. Kākoʻo pū nā huahana i koho ʻia i ka pasteurization, ka hoʻomehana hou ʻana i ka microwave a i ʻole nā ​​​​​​hoʻohana ʻana i ka meaʻai mākaukau pālua.

He ikaika loa ka ea i hoʻopaʻa ʻia ma kahi e pono ai ke kiʻi ʻili uhi e hana ma ke ʻano he ʻāpana o ke kaʻina hana hoʻopili piha ma mua o kahi mea i hoʻokaʻawale ʻia. Hiki i kāna lako a me ka ʻike noi ke waiwai nui no nā mea hana e ʻike nei i nā leaka, nā wrinkles, ka ʻike maikaʻi ʻole o ka papa a i ʻole ka ikaika sila kūlike ʻole.

Pono nā mea kūʻai e ʻike inā hoʻohana kā lākou kaʻina hana i ka holoi ʻana i ke kinoea, ka vacuum maʻamau, ka pasteurization a i ʻole ka hoʻomehana hou ʻana ma mua o ke koho ʻana i kahi papa CRYOVAC.

4. Nā Uhi

ʻOi loa no: Nā ʻiliʻili poʻi lahilahi i paʻi ʻia me nā hiʻohiʻona pale a me nā hiʻohiʻona maʻalahi.

Hana ʻo Coveris i nā ʻiliʻili uhi coextruded a me laminated no nā mīkini thermoforming, tray-seal, MAP a me ka vacuum-packaging. Hiki ke hoʻololi ʻia nā pae pale mai ka haʻahaʻa a me ka waena a i ke kiʻekiʻe, ma muli o ka ʻike o ka huahana a me nā koi o ke ola papa.

ʻO kāna waihona uhi lahilahi e kālele ana i ka downgauging. Hiki i nā ʻano lahilahi ke hāʻawi i nā mika hou aku no kēlā me kēia reel, hōʻemi i nā hoʻololi reel a hoʻohaʻahaʻa i ke kaumaha o ka ʻōpala me ka mālama ʻana i ka hana mechanical.

Hāʻawi pū ʻo Coveris i ka paʻi ʻana a hiki i 10 mau kala, nā ʻano matte a i ʻole ka hopena pepa, nā ʻano hiki ke hoʻopaʻa hou ʻia a me nā manaʻo hoʻopili hana hou no nā ʻeke PE, PP a me PET.

He kūpono loa ka ʻoihana i nā lama meaʻai ʻEulopa e makemake ana e hoʻohui i ka hōʻike ʻana o ka papa, ka pono o ka hana a me ka hoʻemi ʻana i nā mea. Pono nā mea kūʻai e hōʻoia i kekahi koi hana hou e kūʻē i ke kahua hōʻiliʻili a me ka hana hou ʻana ma ka mākeke kūʻai i manaʻo ʻia.

5. Winpak

ʻOi loa no: Nā mea hana waiū, nā ʻeke ʻāpana, nā protein a me nā papahana e pono ai ke kiʻiʻoniʻoni, nā pā a i ʻole nā ​​​​lako hoʻopiha.

Hana ʻo Winpak i nā ʻili ʻōwili, die-cut, daisy-chain a me nā ʻili uhi liʻiliʻi. Hāʻawi kāna laina huahana i ka yogurt, nā mea ʻono, nā mea ʻono, nā mea ʻono, ka tīhi, ka ʻiʻo, ka moa, nā meaʻai kai a me nā meaʻai i hoʻomākaukau ʻia.

Hāʻawi nā kiʻiʻoniʻoni uhi hoʻēmi a Winpak i ka mōakāka kiʻekiʻe, ka hana anti-fog, ke kū'ē ʻana i ka puncture a me nā koho pale EVOH. Hāʻawi pū ka ʻoihana i nā kiʻiʻoniʻoni hiki ke wehe ʻia no HIPS, PP, PET a me nā ʻano multilayer.

ʻO kahi ʻokoʻa koʻikoʻi ʻo ia ke ʻano o kāna ʻōnaehana. Hana ʻo Winpak i nā mea uhi me nā kīʻaha, nā pā a me nā mīkini hoʻopili, hiki ke kōkua i nā mea kūʻai aku e hoʻonohonoho i ka hana o nā mea a me nā lako.

He mea pili loa ʻo Winpak i nā mea hana ʻAmelika ʻĀkau e hana ana i nā laina protein hoʻopiha kīʻaha nui a i ʻole nā ​​​​​​laina protein mākaukau no ka hihia. Pono nā mea kūʻai ma waho o kāna mau mākeke koʻikoʻi e hōʻoia i ka loaʻa ʻana o nā huahana kūloko a me ka uhi ʻana o ka lawelawe loea.

6. Wipak

ʻOi loa no: Nā hale pale kiʻekiʻe hiki ke hana hou ʻia a me nā ʻōpala pani hou kiʻekiʻe.

ʻO ka papa hana uhi pā a Wipak e pili ana i nā kiʻiʻoniʻoni pale kiʻekiʻe e pili ana i ka PP a me ka PE, nā ʻano maʻalahi e ʻili a me ka sila weld, nā kiʻiʻoniʻoni haʻahaʻa no nā pā APET, nā kiʻiʻoniʻoni hiki ke pani hou ʻia a me nā hopena laminate pepa.

Loaʻa i kekahi mau hale Wipak he 90–95% PP a i ʻole PE a ua hoʻolālā ʻia e hoʻohui i ka hana pale me ka hoʻomaikaʻi ʻana i ka hana hou ʻana. ʻO nā hana i loaʻa e komo pū me ka maopopo anti-fog, ka wehe maʻalahi, ka sila paʻa, ka pale kiʻekiʻe a me ka pani hou ʻana.

ʻO kēia laulā e hoʻolilo ai iā Wipak i moho ikaika no ka ʻiʻo, iʻa, moa, tīhi, mea hana waiū, nā meaʻai mākaukau, nā huahana a me nā ʻōpala protein ʻē aʻe.

He mea hoihoi loa ʻo Wipak i nā lama ʻEulopa e pono ai nā palapala hoʻopili e kākoʻo i nā hoʻoholo hoʻomau. Eia nō naʻe, pono e hoʻāʻo ka mea kūʻai aku i ka hui piha o ka pā a me ke kiʻiʻoniʻoni a hōʻoia i ka ʻae ʻia ʻana o ka koi hana hou i manaʻo ʻia ma kēlā me kēia mākeke huakaʻi.

7. UFlex

ʻOi loa no: Nā kiʻiʻoniʻoni BOPET a me CPP kūikawā me ka laulā hana honua.

Hana ʻo UFlex i nā ʻili ʻōpala BOPET, BOPP, CPP, i hoʻoheheʻe ʻia, i uhi ʻia a me nā ʻili pale kiʻekiʻe. ʻO kāna mau huahana e pili ana i ka uhi ʻana e komo pū me ka CPP hiki ke peel, ka CPP anti-fog, ka CPP retortable, ka polyester sila wela a me nā ʻili polyester easy-peel.

Ua hoʻomohala ka ʻoihana i nā uhi sila-ʻili wai no nā noi uhi PET. Ua manaʻo ʻia nā kiʻiʻoniʻoni i koho ʻia no nā pā APET, RPET, CPET, GPET a me PVC a hiki ke hāʻawi i ka hana anti-noe anu a me ka wela.

Hoʻohui ʻia ʻo UFlex ma ke ʻano kū pololei ma waena o nā kiʻiʻoniʻoni, nā uhi, nā mea hoʻopili, nā cylinders paʻi, nā mīkini hoʻololi a me nā mīkini hoʻopili. Hiki ke lilo kēia i mea pono no nā mea hoʻololi nui a me nā lama e pono ai ka hoʻomohala ʻana i nā kiʻiʻoniʻoni maʻamau ma nā wahi he nui.

Ma muli o ka nui o ka waihona UFlex, pono nā mea kūʻai e noi i kahi ʻōlelo aʻoaʻo māka kikoʻī ma mua o ka noi wale ʻana no ka 'ʻili uhi.' Pono ka RFQ e wehewehe inā koi ka papahana i ka hana peelable a lock-seal paha, ka substrate tray kikoʻī a me nā kūlana microwave, umu a retort paha.

8. Nā Plastics Toray (ʻAmelika)

ʻOi loa no: Ka uhi polyester e pono ai ka launa pū ʻana me ka substrate a i ʻole ka hana hiki ke hoʻomehana ʻia i loko o ka umu i ʻelua manawa.

Hana ʻo Toray Plastics (ʻAmelika) i nā ʻili uhi polyester LumiLid. Hoʻopaʻa ʻia nā papa LumiLid i koho ʻia i CPET, APET, pepa pepa, HDPE, PP, HIPS, PETG, PVC, alumini, aniani a me nā ipu i hui pū ʻia.

Ua ʻike ʻia nā kiʻiʻoniʻoni no ka puka makani sila ākea, ka ʻili maʻemaʻe a me ka hiki ke sila ma o nā koena meaʻai i kaupalena ʻia. Hiki ke ʻili ʻia kekahi mau ʻano me ka wela a me ke anu a hiki ke hoʻomehana ʻia i ka umu pālua ma nā mahana a hiki i 400°F no 30 mau minuke, e like me ke kikoʻī huahana pili.

Hāʻawi pū ʻo Toray i nā koho moakaka, keʻokeʻo, metala a me nā koho bio-based. ʻO kāna kaʻina hana extrusion-coating solvent-free kekahi hiʻohiʻona ʻokoʻa no nā mea kūʻai e hopohopo nei e pili ana i ka solvent i mālama ʻia a i ʻole ke ʻala.

He loea ikaika ʻo Toray no nā meaʻai i hoʻomākaukau ʻia, nā meaʻai hau, nā hale kūʻai berena, nā huaʻai a me nā ʻōpala waiū. Pono nā mea kūʻai e hōʻoia inā makemake lākou i kahi laminate i paʻi ʻia a i ʻole kahi kiʻiʻoniʻoni kumu e loaʻa hou aku ka hoʻololi ʻana.

9. Flexopack

ʻOi loa no: ʻO ka ʻiʻo, ka moa, nā meaʻai kai a me nā ʻōpala waiū me ka hoʻohana ʻana i ka ʻili pale coextruded.

Hana ʻo Flexopack i nā ʻili uhi coextruded a laminated e kūpono me nā pā PE, PP a me PET a me nā pūnaewele lalo. ʻO nā koho e komo pū me nā ʻili kiʻekiʻe-gloss, low-haze a me nā anti-fog i nā ʻano lock-seal a i ʻole easy-peel.

Hoʻokomo pū ʻia kāna laina FLEXOLID i nā ʻili uhi hiki ke hoʻēmi ʻia i hoʻolālā ʻia e hana i kahi hōʻike kūʻai kūʻai paʻa. Kuhi ka laina MONOLID i nā manaʻo hoʻopili mono-material mākaukau e hana hou.

ʻO ka hiki ke hana kū pololei o Flexopack a me ka hana kūikawā i ka ʻōpala meaʻai e hoʻolilo ia i mea kūpono loa no nā protein hou a me nā protein i hana ʻia, nā huahana waiū a me nā meaʻai kai.

Pono e loiloi ʻia nā papahana e like me ke ʻano huahana maoli a me nā kūlana MAP. ʻO nā iwi ʻoi, nā lihi paʻakikī, nā pae purge kiʻekiʻe a me ka haumia o ka flange aila e koi paha i nā kikoʻī puncture, sealant a i ʻole ke keʻakeʻa like ʻole.

10. Plastopil

ʻOi loa no: Meaʻai anu, sila ʻia ma o ka haumia a me ka ʻōpala hiki ke pani hou ʻia.

He loea ʻo Plastopil i ka hoʻopili ʻana i nā meaʻai anuanu no nā meaʻai. ʻO kāna papa hana uhi e pili ana i ka Toplex lock-seal, easy-open, reclosable, high-barrier a me nā ʻano lahilahi shrink-film.

Ua hana ʻia nā kiʻiʻoniʻoni i koho ʻia e hana i nā sila hermetic ʻoiai inā he mau koena huahana liʻiliʻi ma ka ʻaoʻao o ka pā. He mea waiwai kēia no nā meaʻai pulu, ʻaila a i ʻole nā ​​meaʻai i hoʻokumu ʻia i ka protein kahi e hiki ai i ka haumia liʻiliʻi ke hoʻonui i ka nui o ka leaka.

Lawelawe ʻo Plastopil i ka ʻiʻo, ka tīhi, ka iʻa, ka meaʻai i hoʻomākaukau ʻia a me nā hana hoʻomaʻalili ʻē aʻe. He mea pili loa kāna mau kiʻiʻoniʻoni hiki ke pani hou ʻia i nā ʻeke lawelawe he nui kahi e hoʻoikaika ai ka maʻalahi a me ka hoʻemi ʻana i ka ʻōpala meaʻai.

Pono nā mea kūʻai e holo i nā hoʻokolohua laina hana e hoʻokumu i kahi puka makani sila paʻa ma waena o nā ʻano like ʻole i manaʻo ʻia i ka maʻemaʻe o ka flange, ka manawa noho a me nā ana o ka pā.

11. Nā Hoʻopuka ʻAeto Gula

ʻOi loa no: ʻIli uhi maʻamau e pono ai ka hoʻololi kūikawā a i ʻole ka hanu i kāohi ʻia.

Hana ʻo Golden Eagle Extrusions i nā ʻili uhi i hana pilikino ʻia i nā ʻano moakāka, keʻokeʻo, metala ʻia, foil a me nā ʻano retortable. ʻO nā koho e komo pū me ka peel maʻalahi, waena a me ka paʻakikī, nā sila weld, nā ʻili dual-ovenable, nā ʻili pale kiʻekiʻe a me nā ʻano peel-reseal.

ʻO kāna mau hiki i loko o ka hale e komo pū me ka lamination, coextrusion, printing, slitting, corona treatment, micro-perforation a me macro-perforation. ʻO kēia ka mea e kūpono ai ka hui no nā noi i hiki ʻole ke hoʻoponopono ʻia me kahi kiʻiʻoniʻoni papa inoa maʻamau.

He mea kūpono loa ʻo Golden Eagle no ka hana ʻana i nā ʻōpala, kahi e hiki ai i ka hoʻololi kinoea i kāohi pono ʻia a me ka nalowale o ka makū ke hoʻopilikia i ke ola o ka papa. Hāʻawi pū ia i nā meaʻai i mākaukau, nā meaʻai hau, nā mea inu a me nā hana ʻoihana.

No ka ʻōpala hanu, pono nā mea kūʻai e hāʻawi i ka ʻikepili hanu huahana, ke kaumaha o ka ʻeke, ka mahana mālama a me ka lewa i manaʻo ʻia. ʻAʻole paha e hāʻawi ka kikoʻī perforation i kope ʻia mai kahi huahana ʻē aʻe i ka hopena ola like.

12. ʻO ke kiʻiʻoniʻoni polyester Mitsubishi

ʻOi loa no: Nā poʻi PET, pani alumini a me ka ʻili polyester i hana kūikawā ʻia.

Hana ʻo Mitsubishi Polyester Film i nā kiʻiʻoniʻoni polyester HOSTAPHAN no nā hana uhi. Hoʻokomo pū ʻia ka laulā i nā kiʻiʻoniʻoni kumu, nā kiʻiʻoniʻoni sila wela, nā kiʻiʻoniʻoni hiki ke wehe ʻia, nā kiʻiʻoniʻoni keʻokeʻo, nā kiʻiʻoniʻoni moakaka, nā papa anti-fog a me nā koho i loaʻa i ka PCR.

Hoʻohana ʻia nā kiʻiʻoniʻoni HOSTAPHAN no ka yogurt, nā mea ʻono, nā mea inu, nā pālahalaha, nā huaʻai, nā mea kanu a me nā meaʻai mākaukau. ʻO nā ʻano ʻili i koho ʻia he kūpono no nā noi anuanu, hau, microwave a me ka umu, me nā ʻano meaʻai mākaukau e hoʻokuʻu ponoʻī.

Hoʻomohala pū ka ʻoihana i nā manaʻo mono-material i hoʻokumu ʻia ma ka PET kahi i hana nui ʻia ai ka pā a me ke poʻi ma ka PET. Hiki i nā ʻiliʻili poʻi polyester keʻokeʻo ke hāʻawi i kahi koho ʻē aʻe i ka alumini kahi e koʻikoʻi ai ke kūpaʻa ʻana i ka puncture, ka hiki ke paʻi ʻia a i ʻole ka ʻike ʻana i ka metala.

He hoa hana loea ikaika ʻo Mitsubishi Polyester Film. Pono nā mea hoʻololi a me nā mea hoʻopaʻa meaʻai e wehewehe inā makemake lākou i kahi ʻili kumu, kahi ʻili sila pololei a i ʻole kahi ʻano uhi i paʻi ʻia.

Pehea e koho ai i ka mea hana kiʻiʻoniʻoni Lidding kūpono

ʻAʻole pono ka mea hoʻolako maikaʻi loa ka hui nui loa. ʻO ka mea hana ke hiki ke hoʻohālikelike i kāna kiʻiʻoniʻoni i kāu pā, huahana, mīkini, kaiapuni hoʻolaha a me nā koi kalepa.

1. E ʻike i ka ʻili sila pono o ka pā

Mai kuhikuhi wale i ka 'PET tray' a i ʻole 'PP tray.' Loaʻa paha i kahi pā PET kahi papa sila PE, kahi papa pale EVOH a i ʻole kahi uhi kūikawā. Pono ke sila ʻili i ka mea i loaʻa ma ka flange.

E hāʻawi i ka mea hoʻolako me:

• ʻO ka resin tray a me ka hoʻolālā multilayer

• Mea hoʻolako pā a me ke code huahana

• ʻO ka laulā o ka flange a me ke kūlana o ka ʻili

• Kiʻi pā a i ʻole nā ​​​​laʻana kino

• Pae o ka ʻike hana hou ʻia, inā pili

2. E koho i ke ʻano wehe e pono ai

Hoʻomaikaʻi ka ʻili maʻalahi i ka maʻalahi o ka mea kūʻai aku, ʻoiai ʻo ka sila wili a laka paha e hāʻawi i nā hōʻike hoʻopunipuni ikaika a me ke kūʻē ʻana i ka leakage. Hiki i nā ʻili hiki ke hoʻopaʻa hou ʻia ke kākoʻo i nā huahana lawelawe he nui.

E wehewehe inā pono ka ʻeke:

• ʻIli maʻalahi

• ʻIli waena

• Sila hoʻopaʻa a laka paha

• E ʻili a hoʻopaʻa hou

• ʻIli wela, ʻili anu a i ʻole nā ​​mea ʻelua

• ʻIli ʻāpana hoʻokahi me ka ʻole o ka haehae a ʻokiʻoki ʻana paha

3. E wehewehe i ka pahuhopu pale

Pono e koho ʻia ka pale mai ka hoʻāʻo ʻana i ke ola o ka papa ma mua o ka huaʻōlelo 'pale kiʻekiʻe' wale nō. ʻO ka nui o ka hoʻoili ʻana o ka oxygen a me nā koi o ka nui o ka hoʻoili ʻana o ka wai-mahu e pili ana i ka huahana, ka hui kinoea, ka mahana mālama a me ke ola o ka papa i manaʻo ʻia.

Manaʻo pinepine ʻia nā ʻili kiʻekiʻe-pale a i ʻole EVOH-no ka ʻiʻo, nā meaʻai kai, ka tīhi a me nā meaʻai mākaukau koʻikoʻi. ʻOi aku ka kūpono o nā ʻili hanu a i ʻole nā ​​​​​​mea i puka ʻia no nā huahana hanu.

4. E hoʻohālikelike i ke kiʻiʻoniʻoni i ke kaʻina hana hoʻopili

Pono ke kiʻiʻoniʻoni e noho paʻa ma ka puka makani hana maoli o ka laina. ʻO nā mea nui e komo pū me:

• Hana a me ke kumu hoʻohālike o ka mea sila pā

• Ka wikiwiki o ka laina

• Mahana sila

• Ka manawa noho a me ke kaomi

• MAP a i ʻole ke kaʻina hana vacuum

• Pasteurization a i ʻole ke kaʻina hana retort

• Hoʻohana ʻia ka microwave a i ʻole ka umu maʻamau

• Hoʻolaha ʻia i loko o ka pahu hau a i ʻole ka hau

5. Loiloi i ke kumukūʻai holoʻokoʻa o ka hoʻopili ʻana

ʻAʻole hāʻawi mau ke kumukūʻai haʻahaʻa loa no kēlā me kēia kilokani i ke kumukūʻai hoʻopili haʻahaʻa loa. Hiki i kahi ʻili ʻoi aku ka maikaʻi ke hōʻemi i nā hōʻole, ka leakage, ka downtime, nā hoʻololi reel, ka ʻōpala meaʻai a me nā hoʻopiʻi a nā mea kūʻai aku.

E hoʻohālikelike i nā mea hoʻolako me ka hoʻohana ʻana i ke kumukūʻai no kēlā me kēia pūʻolo i ʻae ʻia, ʻaʻole wale ke kumukūʻai kiʻiʻoniʻoni.

6. E noi i nā palapala hoʻokō a me ka hoʻāʻo

E noi i nā palapala e pili ana i ka mākeke a me ka noi o kahi e hele ai, me nā hoʻolaha pili i ka meaʻai, ka ʻike hoʻāʻo neʻe ʻana, nā pepa ʻikepili loea, nā kaʻina hana traceability a me nā palapala hōʻoia maikaʻi.

Pono nā palapala hoʻoponopono e uhi i ke ʻano o ka ʻiliʻili i hoʻopau ʻia a me nā kūlana i manaʻo ʻia no ka hoʻohana ʻana—ʻaʻole wale nā ​​​​mea maka pākahi.

Nā ʻAno Kiʻiʻoniʻoni Lidding Maʻamau a me nā Noi

Pono e hōʻoia mau ʻia ka hoʻonohonoho hope loa me ka pā maoli, ka huahana a me nā kūlana hana.

ʻIke e hoʻokomo i loko o kahi Lidding Film RFQ

ʻO kahi noi kikoʻī no ka ʻōlelo kūʻai e kōkua i ka mea hana e ʻōlelo aku i ke ʻano kūpono a hoʻemi i nā pōʻaiapuni laʻana.

Hoʻokomo pū:

1. Ke hoʻopaʻa ʻia nei ka huahana

2. Mea pā a me ke ʻano piha

3. Nā ana o ka pā a me ka laulā o ka flange

4. ʻO ka laulā o ke kiʻiʻoniʻoni, ka mānoanoa a me ke anawaena o ka ʻōwili

5. Ke anawaena o ke kumu a me ke kuhikuhi o ka wili ʻana

6. Koi kiʻiʻoniʻoni maʻamau a paʻi ʻia paha

7. Koi maʻalahi-ʻili, weld-sila a i ʻole resealable

8. Ka ikaika o ka ʻili i manaʻo ʻia, inā ʻike ʻia

9. ʻO ka OTR a me ka WVTR e pono ai

10. Koi anti-noe

11. Hoʻohuihui kinoea MAP

12. Ka mahana sila, ke kaomi a me ka manawa noho

13. Nā kūlana pasteurization, retort, microwave a i ʻole umu

14. Mālama ʻia i loko o ka pahu hau, hau a i ʻole kahi e mālama ai

15. Ka lōʻihi o ka papa i manaʻo ʻia

16. Nā koi o ka mākeke pili meaʻai a me nā palapala

17. Ka nui o ka makahiki i manaʻo ʻia

18. Nā koi hoʻāʻo laʻana a me ka laina hana

Nā Nīnau i Nīnau Pinepine ʻia

He aha ka ʻili uhi?

ʻO ka ʻili uhi he mea palupalu i hoʻohana ʻia e sila i nā pā, nā kīʻaha a me nā pahu paʻa a hapa paʻa paha. Mālama ia i ka huahana i hoʻopaʻa ʻia, kōkua i ka pale ʻana i ka liki a me ka haumia, a hiki ke hāʻawi i ka pale oxygen, ka pale makū, ka pale noe, ka maʻalahi o ka ʻili ʻana, ka hana hiki ke sila hou ʻia a i ʻole ka hana pale wela.

ʻO wai nā mea hana kiʻiʻoniʻoni uhi alakaʻi i ka makahiki 2026?

ʻO nā mea hana alakaʻi e loiloi i ka makahiki 2026 ʻo HSQY Plastic Group, Amcor, Sealed Air, Coveris, Winpak, Wipak, UFlex, Toray Plastics (ʻAmelika), Flexopack, Plastopil, Golden Eagle Extrusions a me Mitsubishi Polyester Film. ʻO ke koho kūpono e pili ana i ka substrate tray, ka noi, ke kaʻina hana sila, ke koi pale a me ka ʻāina kūʻai.

ʻO wai ke kiʻiʻoniʻoni uhi e kūpono no kahi pā CPET?

Hoʻohana pinepine ʻia nā kiʻiʻoniʻoni PET i uhi ʻia a i hoʻopaʻa ʻia paha me nā pā CPET, ʻoi aku hoʻi no nā meaʻai i mākaukau e pono ai ka hoʻomehana ʻana i ka microwave a i ʻole ka umu maʻamau. Pono e ʻae kūikawā ʻia ke kiʻiʻoniʻoni no ka mahana i manaʻo ʻia a pono e hoʻāʻo ʻia ma ka pā CPET maoli.

He aha ka ʻokoʻa ma waena o ka ʻili easy-peel a me ka weld-seal film?

Ua hoʻolālā ʻia ka ʻili ʻili maʻalahi e wehe me ka ikaika i kāohi ʻia a hoʻokaʻawale maʻemaʻe mai ka pā. Hoʻokumu ka ʻili sila-weld a i ʻole ka sila-lock i kahi pilina ikaika a paʻa loa a koho ʻia i ka wā e ʻoi aku ka nui o ka pono o ka sila kiʻekiʻe a i ʻole ka hōʻike hoʻopunipuni ma mua o ka wehe maʻalahi.

Hiki ke hana hou ʻia ka ʻili uhi?

Ua hoʻolālā ʻia kekahi mau kiʻiʻoniʻoni uhi e like me nā ʻano PE, PP a i ʻole PET e hoʻomaikaʻi i ka launa pū ʻana me nā kahawai hana hou. Aia ka hiki ke hana hou ʻia ma ke ʻano maoli i ka pūʻolo piha, nā mea hoʻopili, nā uhi, nā ʻīnika, nā koena a me nā ʻōnaehana hōʻiliʻili kūloko a me ka hana hou ʻana.

ʻOi aku ka maikaʻi o ka ʻili ʻaʻahu kiʻekiʻe?

ʻAʻole. Hiki i ka pale keu ke hoʻohui i ke kumukūʻai a me ka paʻakikī o nā mea me ka ʻole o ka hoʻomaikaʻi ʻana i ka huahana. Pono paha nā huaʻai hou i ka hanu i kāohi ʻia, ʻoiai ʻo ka ʻiʻo, ka tīhi a i ʻole nā ​​​​meaʻai kai e pōmaikaʻi mai kahi pale oxygen ikaika. Pono e hoʻokumu ʻia ka pae pale ma o ka hoʻāʻo ʻana i ke ola papa o ka huahana.

Pehea e hoʻāʻo ʻia ai kahi ʻili uhi hou?

Pono e hoʻomaka ka hoʻāʻo ʻana me nā hoʻāʻo sila o ka hale hana, a ukali ʻia e nā hoʻāʻo laina hana a me ka hōʻoia ʻana o ka hāʻawi ʻana a i ʻole ke ola papa. E nānā i ka ikaika o ke sila, ka leakage, ke kūlike o ka ʻili, ka mōakāka, ka hana anti-fog, ka pale, ke kū'ē ʻana i ka puncture, ka wikiwiki o ka mīkini a me ka hana ma hope o ka hoʻomaʻalili ʻana, ka hoʻopaʻahau ʻana a i ʻole ka mālama wela.

Manaʻo Hope Loa

No nā mea kūʻai e ʻimi nei i kahi ʻili uhi maʻamau me nā pā PET, PET/PE, CPET a i ʻole PP e kūlike ana, hāʻawi ʻo HSQY Plastic Group i kahi koho hoʻohui pono. Uhi kāna laina i nā ʻano hana pale kiʻekiʻe e maʻalahi ke ʻili, anti-fog a me EVOH no nā noi hoʻopili meaʻai he nui.

Hiki i nā papahana multinational nui ke hoʻoikaika iā Amcor, Sealed Air a i ʻole Coveris no kā lākou pae honua a me nā kumuwaiwai loea. He mea pili loa ʻo Winpak i ka hoʻopiha kīʻaha a me ka hoʻopili ʻana i ka protein ʻAmelika ʻĀkau, ʻoiai ʻo Wipak e hāʻawi ana i kahi koho ākea o nā hoʻonā hana hou a me nā pani hou ʻana o ʻEulopa. Kū ʻo Toray lāua ʻo Mitsubishi Polyester Film no nā ʻenehana PET kūikawā, a hāʻawi ʻo Flexopack, Plastopil lāua ʻo Golden Eagle i ka ʻike loea ikaika i ka hoʻopilikino ʻana i ka meaʻai.

Ma mua o ke koho ʻana i kekahi mea hana, e noi i nā laʻana a hoʻopau i nā hoʻokolohua sila me ka hoʻohana ʻana i ka pā maoli, ka huahana a me ka laina hana. Pono e kūʻai ʻia kahi ʻili uhi ma ke ʻano he ʻāpana o kahi ʻōnaehana hoʻopili i hoʻāʻo ʻia—ʻaʻole ma ke ʻano he ʻōwili plastik hiki ke hoʻololi ʻia.