Nā Hiʻohiʻona Huahana

ʻIkepili ʻenehana
Ikaika hopena	850J/m  ʻO ka ikaika hopena o nā pepa PC paʻa he 250 mau manawa o ke aniani,  20-30 mau manawa o ka pepa PMMA
Ka hoʻoili ʻana o ke kukui	80% -90% no ka mānoanoa like ʻole o ke kala moakaka
Ke kū'ē ʻana o ka UV	50μm UV layer, hiki ke kānana i ka 99% ultraviolet radiation i ka lā
Ka helu o ka hoʻonui wela	0.065 mm/m°c
Mahana lawelawe	-40°c a i 120°c
Ka hoʻokele wela	2.3-3.9 W/m2 °c
Ikaika tensile	>60N/mm2
Ikaika kūlou	100N/mm2
Alanui Tensile i ka wā hoʻomaha	>65mPa
Mahana hoʻohuli wela	140°c
Papa kuhikuhi pale leo	4mm ka mānoanoa--27dB, 5mm--28dB, 6mm--29dB

1) Ka hoʻoili ʻana o ke kukui kiʻekiʻe: A hiki i ka 88% o ka mānoanoa like o ke aniani maʻamau.

2) Kū'ē hopena maikaʻi loa: 80 manawa o ke aniani.

3) Nā waiwai kūpaʻa i ke aniau a me ka UV i mālama ʻia no nā makahiki: ʻO ka pae kūpaʻa mahana he 40°C ~ +120°C, me kahi kiʻiʻoniʻoni coextruded ultraviolet ma ka ʻili pepa. Hiki iā ia ke pale i ka luhi resin a i ʻole ka melemele i hoʻokumu ʻia e ka ultraviolet.

4) Māmā: 1/12 wale nō o ke kaumaha o ke aniani o ka mānoanoa like. Hiki ke pelu maʻalahi ʻia i ke anu a me ke ʻano wela.

5) Ke kū'ē ʻana i ke ahi: ʻO ka helu hana ahi kiʻekiʻe he papa B1.

6) Palena kani a me ka wela: Palena kani maikaʻi loa no ka pale alaloa a me ka pale wela nui e mālama i ka ikehu.

7) He palakika ʻenekinia me ka hiki ke hoʻohui maikaʻi loa. Loaʻa iā ia nā hiki kino, mīkini, uila a me ka wela kupaianaha.

Nā noi mea pepa PC

1. Nā lako uila: He mea hoʻokaʻawale maikaʻi loa ka Polycarbonate, hoʻohana ʻia e hana i nā plug-ins hoʻokaʻawale, nā mōlina wili, nā puka paipu, a me nā pūpū pila no nā kukui o ka mea miner.

2. Nā lako mīkini: hoʻohana ʻia e hana i nā ʻano kia like ʻole, nā ʻūlū, nā ʻūlū, nā levers, nā crankshafts, a me kekahi mau hale lako mīkini, nā uhi, nā mōlina a me nā ʻāpana ʻē aʻe.

3. Nā lako lapaʻau: nā kīʻaha, nā paipu, nā ʻōmole, nā lako niho, nā lako lāʻau lapaʻau, a me nā ʻōkana hana i hiki ke hoʻohana ʻia no nā kumu lapaʻau.

 4. Nā ʻano ʻē aʻe: hoʻohana ʻia i ke kūkulu ʻana e like me nā panela lima pālua ʻaoʻao hakahaka, aniani hale kōmahana, a pēlā aku.

Nā nīnau i nīnau pinepine ʻia

Q: He aha ka helu ahi o Polycarbonate -
A: Papa B1 helu ahi ʻo ia ka helu ahi maikaʻi loa.

Q: ʻAʻole hiki ke haki ʻia ka Polycarbonate -
A: ʻAneʻane hiki ʻole ke haki ka mea a e kūʻē i ka hapa nui o nā kūlana kū i ka hopena, akā naʻe, ʻaʻole lākou e hōʻoiaʻiʻo 100% ʻaʻole hiki ke haki ka mea, no ka laʻana, inā e waiho ʻia ka mea i loko o kahi kūlana pahū a i ʻole e hoʻohana ʻia i kahi kūlana ballistic.

Q: Hiki iaʻu ke ʻoki i ka Polycarbonate ma ka home a pono wau i nā mea hana kūikawā -
A: Hiki iā ʻoe ke hoʻohana i kā mākou lawelawe ʻoki i ka nui e mālama i ka pilikia o ka ʻoki ʻana, akā naʻe, inā pono ʻoe e ʻoki i nā panela ma ka home hiki iā ʻoe ke hoʻohana i ka jigsaw, Band Saw a me nā fret saws.

Q: Pehea e hiki ai iaʻu ke hoʻomaʻemaʻe i kaʻu pepa polycarbonate -
A: Mai hoʻohana i nā mea abrasive no ka mea e hoʻopilikia i ka mea, ʻo ka ʻōlelo aʻoaʻo maikaʻi loa ʻo ka hoʻohana ʻana i ka wai kopa mehana me ka lole palupalu.

Q: He aha ka ʻokoʻa ma waena o Polycarbonate a me Acrylic -
A: ʻO ka ʻokoʻa nui ma waena o nā mea ʻelua ʻo Polycarbonate ʻaneʻane hiki ʻole ke haki, ʻoi aku ka ikaika o ka acrylic ma mua o ke aniani, akā e haki/haʻihaʻi ia inā hoʻopili ʻia ka ikaika. He papa helu ahi papa 1 ka Polycarbonate kahi he papa helu ahi papa 3/4 ka Acrylic.

Q: Ke hoʻololi nei ke kala o nā pepa i ka manawa lōʻihi?
A: Me ka papa pale UV aniani, ʻaʻole e hoʻololi ke kala o nā pepa PC a hiki ke lōʻihi ma mua o 10 mau makahiki.

Q: Ke hoʻomehana nui nei nā hale polycarbonate i nā mea?
A: ʻAʻole hoʻomehana nui nā hale Polycarbonate i nā mea me ka uhi ʻālohilohi ikehu a me nā waiwai insulating maikaʻi loa.

Q: Ke haki maʻalahi nei nā pepa?
A: He kūpaʻa loa nā pepa Polycarbonate i ka hopena. Mahalo i ko lākou kūpaʻa i ka mahana a me ke aniau, ʻoi aku ka lōʻihi o ko lākou
ola lawelawe.

Hoʻopili ʻana 

Hoʻolauna ʻoihana

   He loea ʻo Changzhou Huisu Qinye Plastic Group Co., Ltd. i ka hana ʻana a me ke kūʻai aku ʻana i ka papa PC, ka papa hoʻomanawanui PC, ka papa hoʻolaha PC a me ka hana ʻana i ka papa PC, ke kahakaha ʻana, ke kūlou ʻana, ka ʻoki pololei ʻana, ka punching, ka polishing, ka hoʻopaʻa ʻana, ka thermoforming, i loko o 2.5 * 6 mika Blister, abs thick plate blister, UV flatbed printing, screen printing, nā kiʻi a me nā laʻana hiki ke hana ʻia. Loaʻa iā mākou ma mua o 16 mau makahiki o ka ʻike hoʻokuʻu aku, e hāʻawi ana i ke kūlana kiʻekiʻe. nā pepa PC i nā mea kūʻai aku ma ka honua holoʻokoʻa, a ua lanakila i ka hoʻomaikaʻi like ʻana mai nā mea kūʻai aku ma ka honua holoʻokoʻa.

Loaʻa iā ʻoe ke kumu e koho ai i ka papa Polycarbonate o Huisu Qinye Plastic Group!

Nā kikoʻī huahana

Inoa Huahana	Pepa palakiko polycarbonate aniani ʻālohilohi kiʻekiʻe
Mānoanoa	1mm-50mm
Ka laulā kiʻekiʻe loa	1220 kenimika
Ka lōʻihi	Hiki ke hoʻopilikino ʻia
Ka nui maʻamau	1220*2440MM
Nā Waihoʻoluʻu	ʻIke ʻia, uliuli, ʻōmaʻomaʻo, opal, ʻeleʻele, hina, a pēlā aku. Hiki ke hoʻopilikino ʻia
Palapala hōʻoia	ISO, ROHS, SGS, CE

ʻO nā pono nui o nā mea PC: ikaika kiʻekiʻe a me ke koina elastic, ikaika hopena kiʻekiʻe, ākea ka laulā o ka hoʻohana ʻana i ka mahana; transparency kiʻekiʻe a me ka dyeability manuahi; haʻahaʻa ka hoʻohaʻahaʻa ʻana, kūpaʻa maikaʻi ka dimensional; kūpaʻa maikaʻi i ka wā; ʻaʻohe ʻono a me ke ʻala ʻole. Hoʻokō nā pōʻino i ke olakino a me ka palekana.

Ka noi ʻana o ka pepa PC

  1. Nā lako uila: He mea hoʻokaʻawale maikaʻi loa ka Polycarbonate, hoʻohana ʻia e hana i nā plug-ins hoʻokaʻawale, nā mōlina wili, nā puka paipu, a me nā pūpū pila no nā kukui o ka mea miner.

2. Nā lako mīkini: hoʻohana ʻia e hana i nā ʻano kia like ʻole, nā ʻūlū, nā ʻūlū, nā levers, nā crankshafts, a me kekahi mau hale lako mīkini, nā uhi, nā mōlina a me nā ʻāpana ʻē aʻe.

3. Nā lako lapaʻau: nā kīʻaha, nā paipu, nā ʻōmole, nā lako niho, nā lako lāʻau lapaʻau, a me nā ʻōkana hana i hiki ke hoʻohana ʻia no nā kumu lapaʻau.

4. Nā ʻano ʻē aʻe: hoʻohana ʻia i ke kūkulu ʻana e like me nā panela lima pālua ʻaoʻao hakahaka, aniani hale kōmahana, a pēlā aku.

Hoʻolauna ʻoihana

He loea ʻo Huisu Qinye Plastic Group Co., Ltd. i ka hana ʻana a me ke kūʻai aku ʻana i ka papa PC, ka papa hoʻomanawanui PC, ka papa hoʻolaha PC a me ka hana ʻana i ka papa PC, ke kahakaha ʻana, ke kūlou ʻana, ka ʻoki pololei ʻana, ka punching, ka polishing, ka hoʻopaʻa ʻana, ka thermoforming, i loko o 2.5 * 6 mika Blister, abs thick plate blister, UV flatbed printing, screen printing, nā kiʻi a me nā laʻana hiki ke hana ʻia. Loaʻa iā mākou ma mua o 10 mau makahiki o ka ʻike hoʻokuʻu aku, e hāʻawi ana i nā pepa PC kiʻekiʻe i nā mea kūʻai aku ma ka honua holoʻokoʻa, a ua lanakila i ka hoʻomaikaʻi like ʻana mai nā mea kūʻai aku ma ka honua holoʻokoʻa.

Loaʻa iā ʻoe ke kumu e koho ai i ka papa Polycarbonate o Huisu Qinye Plastic Group